Upgrade to cs5 cs3 with the error
I try to install CS5 upgraded to my computer. He agrees the CS5 upgrade key, but when I go to select the current CS3 product in the list, it does not accept this series as a serial number valid. I get the error "this serial number is not for a product calling." Please try another. »
You enter the serial number CS3 after selecting the CS3 in the list. Make sure that you select the correct version from the list (to match your CS3 license) and that the name now is the same between CS3 and CS5.
Tags: Adobe
Similar Questions
-
Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017
Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017
error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).
The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.
Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)
Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.
Maybe some interviews, try to run the "chkdsk/r" command at the command prompt
Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.
How to run Checkdisk at startup CHKDSK
http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>
Run SFC/scannow
File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.
WHY: You want to ensure that the base operating system files have not been damaged or changed.
How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow
http://www.Vistax64.com/tutorials/66978-system-files.html>
04/01 / 1107:15: 20:00
-
I was downloading the upgrade to Adobe Bridge. It failed with the error 49. What now?
Mcarlclapp the error States just error 49 or does a download error as well? Also, what operating system are you using? Finally, you are on a managed network?
-
KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"
Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later. If someone else sees this problem and is at - it a solution? I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system. Help?
Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409
Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:
1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507
2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".
3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]
5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...
How will I know if my computer is up to date?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows colleagues for support.
My windows install/windows update is broken; There will not be security critical update, installers fail with the error
code 1, indicating a problem with language packs; I use widows 7 pro for software development.
Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?
More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.
Hand, install the update package out of work.
Your opinion is welcome. I have
Hey Hey Hey Doc K whadu say?
I solved my problem;
the problem was owner and permission on my programs, all users, the program data and my programs (86).
As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.
What have I done? I took possession of the special directories above from "TrustedInstaller".
Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.
-What happened? Do you have a trusted Installer get stuck Mid-install?
I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and
USER, AUTHENTICATED USER. I was perhaps too broad.
I took possession, and then all of the repressed, updates windows are presented themselves to install,.
and I expect /VERIFYNOW SFC before as I mark this as running.
I'm fairly certain VS2008 and VS2010 now repair and install.
Hmmm... always to see funny error message in SFC...
We need a tool to give an overview of a directory tree ownership and permissions.
dB
Hey Hey Hey Doc K whadu say?
-
Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.
Turn off the computer.
Wait 10 minutes.
Start the computer.
The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.
Launch the prompt with administrator privileges.
Press the Windows key + X
Click prompt (Admin)
Type the following command:
Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN
Press enter on your keyboard
Exit command prompt
Restart
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Hello
I have PC and pay monthly. We are a small company.
Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?
Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.
Sincerely
Stefan Svensson
Hello
Please see update requests in your desktop CC application.
CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.
Reference: licenses and terms of use | Adobe
Kind regards
Sheena
-
CS4 and CS5 Indy with the same serial number
CS4 and CS5 Indy with the same serial number may be open both on the same machine?
Thank you!
I wonder how you have two versions with the same serial number? Maybe volume license?
In the world of individual license an upgrade from versions CS4 CS5 would get a new number again, at least in my experience. With regard to the installation of multiple versions (but not different locations, such as the United States and TO the same version) no problem and I often open several versions at the same time to test and answereing questions here on the forum.
-
I'm so fed up with the error message that adobe flash broke down.
I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.
This from Halofromsue copied here:
Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.
Me: it works!
-
Satellite Pro M10 will not start again and comes up with the error message
My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.What can I do to get the notbook again reboot?
Hello
Seems that there are problems with the files of GoBack.
Try to boot in safe mode and remove the Norton System works from your laptop ;)
If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs
Good luck
-
laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 provided with my imac up endlessly with the error.
How can I get these apps on the laptop
What applications and what is the error message?
-
All security updates fail with the error A 80071, 91 code
Hello!
System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]
Background:
- UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
- A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
- Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
- This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.
Problem:
- I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
- On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
- All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
- If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.
What I tried:
- Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
- Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
- Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
- Tried a Full scan with MSE. No anomaly.
- Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
- Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
- Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.
I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".
I'm out of ideas. What's next?
Thank you
~ Ibrahim ~.
1. about 1 year, I installed MSE.
2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).
3. Yes, for about 30 minutes before I uninstalled and installed MSE.
4. Yes.
However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.
Thanks for the help, if! :)
-
Home Vista premium: KB978338 fails with the error code 80004005
Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7
Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows. The PC then realized... Updates not configured correctly - returning changes.
Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.
Hi gbislay,
I think that you are able to get on the desktop after changes have been restored.
Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below
Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.
Step 3: Clean boot the computer
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.
Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.
You can see the steps outlined in the article below, which deals with a similar question
Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.
Thanks and greetings
Ajay KMicrosoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
BITS service fails with the error code 193: 0xc1
Program update of Microsoft with Vista SP 2 is a failure with error code 80246008. Looking at the forum it was suggested that the BITS service does not work so I check this service and it is not executed. When I try to start it, it fails with the error message 193: 0xc1.
The only suggestion I have for this fix is to reinstall Vista. It is probably not necessary?
Hello
I suggest you follow the steps mentioned in the article below.
You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service
http://support.Microsoft.com/kb/916251
If this does not help then I suggest you to download the update that is mentioned in the link given below and install it on the system.
Update for Windows Vista (KB960568)
Click the link below for more information about the Windows Update error.
Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
http://support.Microsoft.com/kb/956706
Windows Update error 80246008
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Download works 9 KB2092914 security update and it fails with the error code 646
Update of security for Works 9, KB2092914, downlaod fails with the error code 646
See this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47
Please let us know if that helps.
Maybe you are looking for
-
No service after upgrade the server to 5.2 on El Capitan
I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc. I restarted the server after the u
-
Compaq 6000 Pro: 6000 pro complete hard drive
My HARD drive is nearly full, so I'll change it with an SSD on 0ne terabite, how do I transfer my operating system and the programs over to the new drive? Thank you for your help.
-
original title: HOTMAIL QUESTIONS I get emails telling me to respond with info and password to open my Hotmail account. Is - is this legitimate? Why the P/W?
-
Internet Explorer does not then that kept idle for awhile... How to fix?
Original title: IE 8 sometimes does not open to the internet When I leave internet and try to open ie 8 there are times that the only way I can come back on is to restart my computer and then IE 8 works fine. I have mozilla firefox but my printer doe
-
I just upgraded my latest e280 v2 to the new firmware and wish I didn't - is it possible to come back? (I tried a search in the forum first, with inconclusive results.) The reason why I don't like, is that when the Sansa stereo dock, it will now sta