UploadedFile does not retain its value

Similar Questions

• Scroller opacity does not retain its values on a PNG...

  When I try and add a scroll of opacity of a PNG logo effect I am able to enter values (sometimes) for the keyframe, opacity, etc. However, when I click and then reselect the PNG the box has been disabled and all values are empty.

  Is this a bug or I'm doing something wrong?

  Please check with another simple image a new page, apply the opacity, deselect, then select new. This would help isolate the problem.

  Thank you

  Sanjit

• Lightroom 3 "Edit in photoshop CS4" does not retain the values of 'detail '.

  Hi all

  I give a try lightroom 3 (finally...), but has noticed that when I have an image to which I applied 'detail' adjustments to reduce the luminescence and color, using "Edit in Photoshop CS4" noise opens the image without the detail adjustments applied. I don't see the option to choose whether to change 'image' or 'image with the lightroom settings' any place and I'm scratching my head trying to find an option in the preferences (prefs both LR and catalog) that allows me to choose 'change with lightroom applied settings '.

  In this way, it is a bit useless.

  Does anyone know how to ' Edit in...» "for lightroom 3 always apply the corrections to image to the copy of the edition?

  Choose rendering with option of Lightroom - not thatdisplay? By default "Edit with" uses the version of Photoshop to Adobe Camera Raw and CS4 is older than LR3.

• Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11

  Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11, version 12 is sucks.

  Hello, Simone

  I'll assume you're on Windows 7. Windows Media Player 12 is not supported on Windows Vista or XP and as such, you will need to go back to Windows Media Player 11.

  You can check the permissions in the registry to ensure that it is able to record information.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Open the registry editor by clicking on start, type regedit.exe in the search box and press on enter, you may be prompted to continue.

  In the registry editor, navigate to HKEY_CURRENT_USER, Software, Microsoft, MediaPlayer, then Preferences.

  It should be an element named LastLocation_26, right-click on it and select Rename, and rename it to old LastLocation_26.

  Leave the open registry editor and open Media Player, then move it to your favorite place and close Media Player.

  In the registry editor, press F5 on your keyboard and check if LastLocation_26 has been recreated.

  If this is not the case, there is probably a permissions problem.

  If so, the location must be registered.

  Let us know.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Variable is shared deployed on target RT retains its value after restart?

  Shared, deployed on a real-time target variables are stored in the nonvolatile memory or RAM? It will hold its value after reset or power/power on? I tested and it seems retains its value, but I have found no documentation on this subject of NEITHER.

  Kind regards

  Tom

  Hello

  There are several components involved in the way the variables are stored on a target, but a part of which is in a non-volatile memory. Shared variables local to the target RT will not retain their value. Any reading of the data of the target host will receive the last value of the target before restarting given that the host is not at the same time re-started. The reason why it is that there are 2 shared engine variables at work; one for the host and one for the target. Since only the target has been restarted, the variable engine shared on the host retains its last value while the engine on the target will be set to 0, false them or an empty string. Here is an example of a community that "Monitor" [s] to the State of emptiness in RT FIFO active shared Variable'.

  Best,

• My CB5-311 does not update its OS past v45. It's up-to-date. Stable channel is now 49.

  My CB5-311 does not update its OS past v45. I click updatae and he says that it is up-to-date. But the stable channel is now 49. Each type of chromebook only supports up to a certain version and Acer stops it going past?

  Systems will receive updates over the next few days.
  https://plus.Google.com/+MichaelSmith53/posts/ZWdbUq5ui3T

  So, probably, is still not available for your phone model, it will be good to ask to Google by the way.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation

  I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation. She did not support on windows 7. isn't there a mechanism to make as the support of windows 8?

  Original title: not to support the pilot

  Hello

  Don't forget to check with the help of the manufacturer of the device as their may be a newer version, if necessary
  still in beta.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• APEX_ITEMS does not store the value in the SESSION after the validation error

  Hello
  
  I'm build dynamically using APEX_ITEMS, but it does not keep the value when the page is submitted and the validation error occurs. Here are the following steps that I am following.
  
  When I enter SUE (more than 8 characters), SUBMIT, validation fails and the error is displayed on the page (which is fine)
  BUT it does not keep SUE value (which I got) and filled with the old value which is ABC.
  
  WHY it does not keep the value that the user entered (even as the normal Page items)
  
  Region PL\SQL

  declare
    v_value varchar2(20);
  begin
    v_value := 'ABC'; 
    htp.p(apex_item.text(7,v_value));
  end;

  Validation (function returning the error text)

  DECLARE
   v_count number;
   v_value varchar2(50);
   v_value1 number;
  BEGIN
    v_value := apex_application.g_f07(1);
    select length(v_value) into v_value1 from dual;
  
        if v_value1 > 8 then
            return 'Field must have less than 9 character';
        ELSE
           return null;
        END IF;
  END;

  You use collections if you want the State to show if, after a validation error. Unfortunately, this is the case if you do not use the normal tabular forms.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  https://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Stay in white adjustment layer and does not apply its effects to the video overlay?

  Stay in white adjustment layer and does not apply its effects to the video overlay?

  I used color correction adjustment layers and now my adjustment layer is just stay white and I watched so many forums and I can't find what I'm doing wrong...

  I have reset my preferences, I did a new project that I am naïve.

  

  It's After Effects but... Try opening the composition window (TAB)

  You are looking at the AL in the film window.

• The value entered does not match the value in the field

  I have a simple form on the page, a field callculates a percentage based on the values entered in 2 other fields, works very well, but then all the entries on the form generates this message "the entered value does not match the value in the field".

  Also, you can remove a tab stop of the fields?

  Just happened again.

• [CS4 |] JS] move anchored object does not change its geometricBounds

  Hello scripters.

  in my Indesign document I anchored objects like sidenotes, sometimes they are overlapping.

  To do this, I'm trying to move until they overlap, I used the following script:

  myInlineRectangles [k] .move (undefined, [0, -2]);

  I put this line in a while loop to move the object (until he do not overlap).

  It works, it moves the object (although I read that it is not possible). The only problem is that the geometricBounds remain the same.

  As I am comparing the geometricBounds in my "all-State" it ends in an infinite loop.

  Why the object does not change its geometricBounds after moving?

  How to avoid this?

  Thank you very much in advance for any response.

  Franzi_ska

  Hi franzi_ska,

  You will need the story containing the anchored object to recompose to get the new geometric limits (after each trip and assuming the anchored object can, indeed, move).

  Thank you

  OLE

• Drop-down list does not appear selected value

  Hello
  
  I have a problem. The output of a query results page. There are 2 fields must be updated: scholarshipID and amount. I want to update my request at a time. My dynamic drop-down list does not appear selected value. The value is there, but it does not recognize in the drop-down list. I could not find the error. My code is below, so please help...
  
  < name cfquery = "getStudentsData" datasource = "#application. DSN #">"
  Select StudentID, fname, lname, GPA, Tbl_Students.ID, ScholarshipID, rise, Tbl_StudentsScholar.ID as the SSID, AwardStatus
  of Tbl_Students, Tbl_ApplyYear, Tbl_EduBckgrnd, Tbl_StudentsScholar
  where Tbl_Students.ApplyYr = Tbl_ApplyYear.id
  and Tbl_Students.id = Tbl_EduBckgrnd.SID
  and Tbl_Students.ID = Tbl_StudentsScholar.SID
  and ApplyYear = 1
  and steps = 7
  order by studentid
  < / cfquery >
  
  < name cfquery = "getScholarship" datasource = "#application. DSN #">"
  Select AcctNum, scholarship, Tbl_Scholarships.id, Code
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  AcctNum order
  < / cfquery >
  
  < cfparam name = 'X' default '0' = >
  < cfparam name = default "CounterX" = "0" >
  
  <!--get scholarship-->
  
  < cfif getStudentsDataRet.RecordCount eq 0 >
  < class p 'paragraph' = > No Records Found < /p >
  < class p = "pageheight" > < / p >
  < class p = "pageheight" > < / p >
  < cfelse >
  
  
  < class p = "submitmessage" > records found - < cfoutput > #getStudentsDataRet.Recordcount # < / cfoutput > < / p >
  < table width = "98%" border = "1" cellpadding = "3" cellspacing = "0" style = "" border-collapse: collapse "bordercolor ="#000000"align ="center">"
  < class tr = "steptext2" bgcolor = "#999999" align = "center" >
  < td width = "10%" > Student ID < table >
  < td width = "9%" > name < table >
  < td width = "9%" > name < table >
  < td width = "5%" > GPA Cum < table >
  < td width = "5%" > account # < table >
  < td width = "5%" > < table > amount
  < td width = "20%" > account # | Dist Code | Scholarship name < table >
  < /tr >
  
  < do action = "updateAward.cfm" method = "post" name = "AwardForm" > "
  < cfoutput query = "getStudentsDataRet" >
  < cfif eq x 0 and x neq getStudentsDataRet.recordcount >
  < cfset x = 1 >
  < cfelseif x neq (getStudentsDataRet.recordcount + 1) >
  < cfset x = x + 1 >
  < / cfif >
  < class = "paragraph" tr >
  < td > #StudentID # < table >
  < td > #lname # < table >
  < td > #fname # < table >
  < td > #GPA # < table >
  
  
  < cfif AwardStatus eq 2 >
  < name cfquery = "getStudentsScholar" datasource = "#application. DSN #">"
  Select Code, Tbl_Scholarships.id, AcctNum, scholarships
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  and Tbl_Scholarships.ID = #getStudentsDataRet.ScholarshipID #.
  < / cfquery >
  < / cfif >
  < td >
  < select name = "" scholarshipID_ #X # "onChange =" showMessage_ #X #(this.options[this.selectedIndex].value) ">"
  < option value = "" > < / option >
  < cfloop query = "getScholarshipRet" >
  < option value = "" #id # "selected < cfif getStudentsDataRet.ScholarshipID eq id > < / cfif > > #AcctNum # < / option >"
  < / cfloop >
  < / select >
  < table >
  < td > < input name = "" amount_ #X # "type ="text"size ="5"< cfif amount gt 0 > value = ' #NumberFormat (amount, 99.99) # ' < / cfif > / > < table >"
  < td > < cfif AwardStatus eq 2 > #getStudentsScholar.AcctNum # | #getStudentsScholar.Code # | #getStudentsScholar.Scholarship # | #getStudentsDataRet.ScholarshipID # < / cfif > < table >
  "< input name =" "IndexID_ #x #" type = "hidden" value = "#SSID #" / >
  < /tr >
  < / cfoutput >
  < cfoutput > < input name = "CounterX" type = "hidden" value = "" #getStudentsDataRet.RecordCount # "/ > < / cfoutput >"
  < b >
  < td align = "center" colspan = "11" height = "50" valign = "middle" > < input name = "Submit" type = "submit" value = "Submit" / > < table >
  < /tr >
  < / make >
  < /table >
  < / cfif >
  

  the syntax is: getStudentsDataRet.ScholarshipID [1]

  where '1' is the line number to specify

• Does not restore the values of form for the restoration of the tab

  Part of my Web site uses a large number of forms on a single page. On the page, you can filter items (each item has its own form) and modify them. One entry looks like this: [name] [select status] [other Select]. Other important things are that the document has an expiration date in 1981 (to apply a page always up to date) and that change the value in the select results in the triggering of an AJAX function.

  It works perfectly, except for one thing. When filtering State id 1, you get back a little of the element. Let's say that the result of the filter are input 5. Change entry #2 status, which triggered an AJAX function. It works very well, but here's the problem: when close the tab and re-opening with Restore tab, select values become disheveled.

  Due to the execution of a fresh copy of the page, the browser will get a new copy of the page. Entry #2 is now gone (I'll keep calling it that, even if she disappeared because of the filter). Now, here's the problem: Firefox is attempting to restore the value to select it. Entry of the status #3 now has the same status of entry #2, #4 a #3 status and so on.

  I managed to solve this problem on other browsers (Chrome, IE) with this little piece of jQuery:
  {$(document) .ready (function ()}
  {$("form[class^='startingformname']").each (function ()}
  This.Reset ();
  })
  });
  It works perfectly, except for Firefox, which seems to ignore the call to reset...

  As this text is quite long, I'll keep my short question: How do you keep Firefox restore the values of the form (preferably: keep them on the selected item in the HTML)? Now, the user always gets a new copy of the page, and Firefox is trying to restore the old values on this page, even though the HTML code has changed.

  I think your two choices is:

  (1) prevent Firefox from page caching, or
  
  (2) use a different event to trigger your reset function

  As I understand it, the function $(document) .ready jQuery () raises the event DOMContentLoaded (or equivalent, if not supported by the browser). If the tab is cached in its ' cache fast back-forward ", Firefox can not fire this event when the user returns to the tab, just like Firefox does not always raise the load event in such cases.

  Discover the event more described in the following article and see if you can use it to trigger your reset function in Firefox: https://developer.mozilla.org/docs/Using_Firefox_1.5_caching

  Who is?

• Why netstat does not export cumulative values?

  I would be grateful if someone could explain why the following does not export the cumulative values as implied by the manual page:

  netstat - I have en0 w 5 b

  Hello

  Quote from the page for netstat (1).

  If a timeout is specified, the protocol information on the last seconds of the interval will be displayed.

  And I get something like this:

  $ netstat -I en0 -w5 -b
              input          (en0)           output
     packets  errs      bytes    packets  errs      bytes colls
           3     0        210          1     0         90     0
          25     0       1927         38     0       2503     0
           5     0        379          7     0        451     0
           0     0          0          0     0          0     0
  ^C
  $
  

  Tested under OS X 10.6.8.

  Kind regards

  H