Use 4 "bootstrap" instead of bootstrap in Dreamweaver - possible?

Similar Questions

• When you use the bootstrap in Dreamweaver CM³, the default navmenus are horizontal. How can we put in a vertical menu that is still sensitive?

  When you add a navigation bar, it gives you 4 options in bootstrap, which no State a vertical menu, they have all by default in the form of horizontal menus. How can I add or change some coding to make my vertical navigation bar? Y at - it another option somewhere that I don't see or I need to change a line of code to make this happen?

  Design of DW interface does not each class possible.  If so, it would be too unruly to work with.  You should be familiar with anything that contains bootstrap information and use your own codes to achieve what you want.  For vertical nav, look up the Bootstrap Nav-pills with the nav-Stack class.

  • Home
  • Menu 1
  • Menu 2
  • Menu 3

  In this tutorial, Nav-pills are horizontal on desktop computers and stacked vertically on mobile.

  Horizontal centered bootstrap tablets - http://alt-web.com/

  Nancy O.

• I am a student in learning Dreamweaver and for our first sensitive assignment, it must include a sensitive video of YouTube.  I don't use a Bootstrap - I simply uses percentages to make sensitive elements.  I was able to insert video but cannot

  I am a student in learning Dreamweaver and for our first sensitive assignment, it must include a sensitive video of YouTube.  I don't use a Bootstrap - I simply uses percentages to make sensitive elements.  I was able to insert the video but can't make it sensitive.  I guess I should put a div around the iframe and make this 100% div width/height auto but apparently that's not true, because that does not affect the video.  Thank you very much.

  Any advice will be greatly appreciated!

  Here's a good page that goes into how to make a sensitive youtube embed video...

  Video fluid width

• When using bootstrap in Dreamweaver is it possible to use a CDN (content delivery network) to speed up loading and have again, he appears to edit in Dreamweaver?

  I started using the bootstrap information and sites that I created are very long to load. I played with the connection to a CDN and loading seems to be accelerating significantly. But when I discovered the site in Dreamweaver, the pages are reduced to lines of text. Is it possible to do this in Dreamweaver? Are there other ways to speed up the loading?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  I'm using CDN hosted in my projects without any problems.   Try these links.

  https://cdnjs.cloudflare.com/AJAX/libs/bootswatch/3.3.6/bootstrap.min.CSS">

  I confess a screaming fast internet connection and a computer fast enough again.  That could make a difference.

• Can I use a bootstrap model in Dreamweaver?

  Hi, I want to buy a bootstrap model that apparently comes with everything. I wanted to know before I bought this if all the codes and the works of feature in Dreamweaver, how compatible are they? Anyone know? Thank you!

  Hi CaroCF89,

  See this http://www.dmxzone.com/go/21757/discover-the-magic-of-twitter-bootstrap-in-dreamweaver/ tutorial to use bootstrap with DW.

  Thank you

  Preran

• Addition of a bootstrap in Dreamweaver Accordion Panel

  I was stupid enough to use a bootstrap accordion in my site instead of a jqueryUi accordion. The last of them is easily editable. Is well integrated with Dreamweaver. The accordion "bootstrap", however it turns out be very convenient. I'm not familiar with the scripts, and as the "bootstrap" accordion is not integrated in Dreamweaver in the same way that Jquery Ui is, I just can't seem to add a simple additional tab.

  Anyone know what it takes to add an additional panel? I have the same problem with the tabs Panel as well.

  Dreamweaver uses a very nice program with a good balance between coding and graphic design. Now, he seems to become harder, rather than easier.

  The best way is to go into code view, copy all of the element with a class of the Panel, after pasting the last element with the class of the control panel and change the ID and href values according to the following guidelines.

  myNewCollapse">Collapsible Group 4

  Content for Accordion Panel 4

• Thunderbird no longer win 10 when I used Windows Defender instead of AVG (if Thunderbird not dangerously ruled Defender analyses) - what is the solution?

  Thunderbird has stopped working win 10 when I used Windows Defender instead of AVG - free

  The event log to win 10 had many "ERROR!" Application Hang. "entries, all this said:
  The version of the program 38.3.0.5749 thunderbird.exe ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the pants of control of security and maintenance
  Process ID: 1acc
  Start time: 01 d102e33137ce7e
  Log name: Application
  Source: Application Hang connected: 10/10/2015 00:45:36
  Event ID: 1002 task category: (101)
  Level: Error keywords: Classic
  User: N/a computer VidAce
  OpCode:

  Things returned to normal when I excluded thunderbird. EXE from analysis of sdefender of window operations. But it's dangerous for security. How to fix this please?
  Thank you.

  Thunderbird is compatible with Windows 10. Defender problems are exactly that. Something that Microsoft needs to fix.

  Regarding a malicious attachments go. What of them?

  Before they can do any harm, they must be transformed into a binary file in the text, they are converted to attach them to the message and then be written in the Temp folder so they can be passed to the operating system with an application for opening of their. An antivirus program that cannot detect the payload of a newly written file and keep it opens is not worth the CPU cycles which is uses for to fail in its primary function. Defender claims to do this. If it isn't, still an issue for Microsoft. Now Thunderbird...

• I like to use my speakers instead of always put in my ear. How to turn the volume of the speaker on the iPhone OS?

  I have an iPhone SE I would use the speaker instead of always put the phone to my ear, but the volume is not good at all on the speaker. Is there a way to increase the volume for the speaker?

  You would turn the volume for the speaker during a call speaker. The volume buttons control different aspects of the volume, such as the ringing, the music, the volume of the speaker during a call. You change certain volumes based on what you happen to be in time. When you first unlock the phone and are simply looking at the home screen, if you press the volume buttons then, you set the ring volume. Change the speaker volume when in a call of the speaker, is that in the call itself, just like changing the volume of the earpiece, that while in the call.

• Apple TV (4th Gen) ~ try to use Siri and instead of answers, it scrolls the suggestions of things I could say.  What happens and how can I cope?

  Apple TV (4th Gen) ~ try to use Siri and instead of answers, it scrolls the suggestions of things I could say.

  What happens and how can I cope?

  Have you actually enabled Siri in settings > general > Siri, or are you just using the Siri button on the remote control?

• ATTENTION: nsIJSON.decode is obsolete. Use JSON.parse instead.

  ATTENTION: nsIJSON.decode is obsolete. Use JSON.parse instead. Symptom. WHN I open a new tab, the creen goes on with my screens recorded, but none of them will load.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  250GB_DRIVE system name
  System manufacturer HP Pavilion 061
  EG705AA-ABA M7265C system model
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 4 GenuineIntel ~ 2800 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.17, 20/04/2006
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  250GB_DRIVE\HP_Administrator user name
  Time zone Pacific Daylight Time
  Total physical memory 072,00 MB 3
  1.55 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.83 GB
  Paging file C:\pagefile.sys

  Hello

  The ASR (automated system recovery) tool must have a disk for restoration purposes. The best option, if you really want to use ASR, is a floppy of USB external as suggested by chrisamiller.

  You can also follow this procedure to create the ASR files without the floppy drive and then copy them to another location to create a floppy disk or, if you're lucky, your PC can boot from a USB key (I never tried to start ASR on a key, do not know if it will work or not, but it might be worth it) :

  "You can"trick"the ASR in the race without a floppy drive." When it gets to the point where he writes on the diskette to cancel it. He writes two files, which are used for recovery, in the Windows\Repair directory. After completing your ASR copy these two files (files asr.sif and asrpnp.sif) to a network location and then make the diskette also. Make sure you update your disk whenever you make a new ASR or your backup will be watered.

  Or, you can use a USB floppy drive. It is sometimes the only option, especially if you need to install SCSI or SATA drivers during the recovery. »

  a: when you start the backup, it may be in Wizard mode. Follow the link to the Advanced Mode.
  b. Backup tab.
  c. click on the box next to the drive you want to back up so that it has a blue box.
  d. backup media or file name: Browse.
  e. Select a new file name on your CD.
  f. start the backup.

• How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

  Hello!

  How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

  I need a third party program? It is very good. If you know one please tell me about it.

  Hi OskarKvist,

  This feature is not supported by Windows XP.

  However, you can use your favorite search engine to download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• I have installed BitComet in my PC (Win 7). How can I disable it when I want to use Windows download instead?

  I have installed BitComet in my PC (Win 7). How can I disable it when I want to use Windows download instead? Thank you. Pete

  To turn off BitComet:

  Temporarily:

  Output file

  - or - the right mouse click on the icon in the system tray and choose exit in the conext menu.

  - or - the right mouse click on the icon in the system tray and select stop all tasks from the context menu.

  Permanently:

  Go to control Panel\Programs and features and select uninstall.

  It might be convenient to change the option and not BitComet starts automatically at Windows startup. With BitComet running, go to Tools Options integrations and uncheck automatically start...

  =====================

  Just out of curiosity: How does BitComet interferes with the simple download of Windows?

  Tom Ferguson

• Can I use photo-noir instead of black?

  Using my Photosmart Premium C410, can I adjust my settings to print on Matt paper strictly using photo black instead of black? I have almost no black/color, but have an abundance of black photo. I do not have an abundance of money, so purchase new black ink is not a good idea.

  Just so that you know, what you have to do to use your PHOTO BLACK instead of BLACK of INK to print (in reason to be perhaps more black ink) is go into the settings of your printer and set it to: impression of the main paper tray, on paper 8 x 11. Click on "print". In this way, your printer thinks it is photo printing - but really, you print on matte paper.

  So the assertion that "you need our product" is false. Another company asking for the purchase of a product not necessarily need

• How can I configure my computer to open pdf files using Adobe DC instead of Microsoft?

  How can I configure my computer to open pdf files using Adobe DC instead of Microsoft?

  Make a right click any PDF file and select open with... Choose the default program.

  Then select Acrobat in the list and check the box to make it the default application.