Use gray OpenCL

Similar Questions

• Night shift is unable to use (gray icon)

  On my control center, the night shift icon is gray and so I can not use this function. How can I activate it?

  

  You have a few accessibility settings preventing the night shift?

  Check the settings > general > accessibility to display parameters that can prohibit the night shift.

  Also check settings > display and brightness.  Can you turn night 'On' here?

• SOUL use multiple OpenCL GPU?

  Hi, I have a MacBook Pro (i7 2.8 GHz, 16 GB RAM) of the retina 2014 with an Intel Pro Iris (1.5 GB) & GeForce GT 750 m (2 GB).

  I was wondering if SOUL appealed to the Pro of the Iris and the GT 750 m during export. According to benchmarking LuxMark, Iris Pro is much faster that the GeForce to OpenCL tasks, so I want to just make sure that the SOUL is making the most of my system.

  No way to force the OpenCL any calculation on the Iris Pro instead of the GeForce?

  Hi Frickenphil,

  Hi, I have a MacBook Pro (i7 2.8 GHz, 16 GB RAM) of the retina 2014 with an Intel Pro Iris (1.5 GB) & GeForce GT 750 m (2 GB). I was wondering if SOUL appealed to the Pro of the Iris and the GT 750 m during export.

  The MacBook Pro will only use the discrete GPU in the encoding process. In other words, the NVIDIA GPU. GPU Intel Iris Pro are disabled for the encoding, as is the Integrated GPU, not the discrete GPU. The discrete GPU should run when Premiere Pro and Media Encoder are launched, because they depend on the GPU in this scenario.

  No way to force the OpenCL any calculation on the Iris Pro instead of the GeForce?

  Sorry, no. I'm afraid that you are not able to switch to the GPU integrated at the launch of Premiere Pro and Media Encoder. The discrete GPU should be used with these applications in the MacBook Pro. You can test this with gfxCardStatus.

  Thank you

  Kevin

• How to use force GRAY of smoothing fonts in Web (Linux 64) mode?

  FX 2.1 release notes says:
  "Applications can also opt-in to use the text of the LCD on the text node scenegraph at low altitude by a new API."
  for example: setFontSmoothingType (FontSmoothingType.LCD), but on what node?
  
  I assume that this applies as well for javafx - sdk2.2.0 - beta, and I can also change globally smoothing to FontSmoothingType.GRAY. Why? b/c LCD is just horrible on my screen, barely readable... but I can wait until the beta will FCS.
  
  Could someone give me an example on how to use GRAY text by setting the text node scenegraph at low altitude on a WebView?

  Have you tried:

      System.setProperty("prism.lcdtext", "false");
  

  I hate LCD smoothing because it makes fonts look like multicolored left letters, so I've just driven it in the world for my program.

• I've updated my Photoshop and the oil paint filter is gray

  I've just updated my Photoshop yesterday and I wanted to try the new paint filter oil

  but it is gray... RGB... CMYK... Change DPI does not help...

  Can you?

  Hi Goodguy813,

  Please make sure that your system meets the following requirements to run the oil paint filter:

  • 1024 x 768 display (1280 x 800 recommended) with 16-bit and 512 MB of VRAM colors (1 GB or more of VRAM is recommended)
  • To use the acceleration OpenGL, your system must support OpenGL 2.0 and Shader Model 3.0 or later version
  • To use the OpenCL acceleration, your system should support OpenCL 1.1 or later

  If your system meets the conditions set out above, then follow the steps below:

  • Choose Edition > Preferences > Performance (Windows) or Photoshop > preferences > Performance (Mac OS).

  • In the results panel, make sure that the graphics processor use is selected in the settings section of the graphics processor.
  • Click Advanced settings and specify the following options: make sure open CL must be verified.

  

  Please let us know if it helps.

  Concerning

  Sarika

• I use Firefox 38 on a PC of Windows 8.1 and want to change the color of the text of the toolbar. I use a dark theme and having trouble reading the font color black.

  I want to use gray or white rather than the default black.

  You can watch this extension:

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

• Satellite U500 - file INF with OpenCL, CUDA from Nvidia driver

  http://www.Megaupload.com/?d=K1BO17TB

  Inf file for g210m on toshiba u500 for beta 195,81 driver did.
  Just download driver and add it to the unzipped directory where are other INF files and install.

  You can now use Physx, OpenCL, CUDA, DirectCompute (enable in CP) and nVidia GPU acceleration for Adobe Flash Player (beta 2 flash drive install new 10.1 from adobe)

  This inf is optimized for DEV_0A74 & SUBSYS_FF401179 g210m.
  If you want to add me as more devices please post what devices you want and I will but you will have to test it.

  I hope this helps.

  Thanks for that, but usually it s advisable to use the Toshiba because the GPU graphics card driver, overheating protection.
  Other drivers don't support this protection and the use of these drivers can cause a higher temperature which could affect the GPU chip.

• Gray printing Officejet Pro K550 problems

  Hello.

  I use a HP Officejet Pro K550 (STD) as well as a new Acer Veriton PC, equipped of Windows 7 Professional 64-bit O.S.

  For normal printing, up to today, it works well, but they are a couple of days, instead, if I print an image, by selecting the "Gray Scale" - high quality option in the printer properties, everything that fate, causing printed in RED scale!

  If instead, I select 'Gray Scale - only black ink', it prints normally.

  What is going on?

  The cartridges are always at the right level (Black XL just replaced) and even after using the utility Scan Doctor, it seems everything is OK... but this isn't reallly so OK.

  What can you tell me?

  I have to print several copies in the next few days and wouldn't no more free time, paper and inks...

  Thanks for the help!

  Hi robevix,

  Welcome to the Forums of HP consumer printer.

  When using gray scale - high quality, he used some color to enhance black. You can browse some general troubleshooting that might help solve the problem:

  http://support.HP.com/us-en/document/c01956550

• How to use the bottom of different color for the areas of text and form on a landing page?

  For our landing page, I like to keep white as the main background but color will have two text as well as a space for these three areas form box, I would use gray.  I got tired of using Fill Content but it will change the whole landing page background color and not only the text box.

  Someone knows how to do this?

  Thank you.

  Hi Angie, you use the WYSIWYG editor to create pages? If so, if I'm reading this right, you are looking to change the background color of the different page elements? You should be able to select each item and apply the color as below:

  

  I would like to know if this isn't what you are looking for.

  Best,

  Rob

• Hi there I can not choose colors in photoshop. He let me just use grey and Pentecost. someone at - he had that before?

  Hi all

  IM new to Photoshop, but did a few things with him.

  I have a problem at the point where I can not choose what color I would like to use in photoshop. I can only use gray and white.

  Any help would be great.

  JJMack is right. Most of the time this happens when you have a channel, or a selected layer mask, not a pixel layer. Open the channels Panel to see exactly what is active. The RGB channel at the top should be active. It is, you can choose colors beyond black and white. If you are on an adjustment layer, you implement a layer with pixels.

• In RGB mode, why paste 50% gray in a layer mask actually put K 59% in the mask?

  Create a new (small) document in RGB mode, 8-bit, transparent background.

  Fill the layer 1, resulting with 50% gray, 100% opacity.  The reports = (128,128,128) RGB eyedropper.

  Copy the layer to the Clipboard.

  Create a new layer 2. Fill it with green #00ff00 (content doesn't really count).

  Add a layer mask to the layer 2.

  Wear this mask during installation.

  Paste the contents of the Clipboard.  The pipette noted the content of the mask as K 59%.

  I expect 50% gray (or K 50%). Why have I not 59% K?

  Additives:

  I'm using CS3 on Mac. I didn't get to see if the same thing happens with newer versions of PS.

  Apply the layer mask in the layer 2. Excerpt from the transparency in a new layer.  The pipette gives the RGB of the

  new layer as (106,106,106), with pixel-by-pixel variations plus/minus 1.

  Take the difference between this new layer and layer 1; the pipette gives the RGB difference as (22,22,22),

  Once again with variations of plus/minus 1.

  Paste the contents of the Clipboard into a new layer.  The pipette gives this new RGB content

  layer as (128,128,128), both without and with a black & white adjustment applied.

  Create a new layer, add a layer mask, fill the mask with 50% gray. The pipette gives the content of

  the new title (128,128,128) (now as expected) master.

  The 50% gray used above is just for simplicity. I am really interested in inserting a complicated RGB

  image containing only shades of gray in the layer mask. This example shows that the collage will not

  preserve the levels of gray. Indeed, when I replace the first 50% of grey with a black and white gradient.

  the differences between the initial gradient and in the mask included roughly quadratic between 0 to 0,

  22 128 and 0 to 255.

  It is a grayscale image, interpreted according to your work of gray.

  Use Gray Gamma 2.2 and you will get 50%.

  EDIT: actually I think you could use sGray, who has the accurate sRGB transfer function - which is not strictly a pure gamma. But it wouldn't be right with for example Adobe RGB.

• Comments - not a design bright pleasant keyboard

  Recently bought a Toshiba Satellite Pro laptop. Looked good in the shop under the Nice bright lighting however once I got it home under normal lighting key lettering is hard to see.

  The design of the laptop uses gray lettering dark on the black keys. Funky Yes, but easy to see under normal lighting... certainly not! Worse even on an aircraft.

  I hope that Toshiba will take into account the lighting on the future design of keyboards.

  Can you please tell us what model of laptop do you have?

• How can I install software on a disc for an iMac 17 "2006

  I have a 17 "iMac Core duo 2.0 end of 2006 model A1208 (EMC2114)

  The hard drive does not so I replaced it with a Seagate 320 GB Firmware RP13

  I also upgraded the RAM to 4 GB DDR 2 665 years.

  In the diagnosis of the disk utility window, I checked all the components, optical drive, ram etc, all looks fine.

  Whenever I try to install OSX 10.5 software all that he says; Mac OS x cannot install software on this computer

  Then I go into disk utility formatted the disk, I tried Fat32 and journaled Mac

  In both cases, all I get is the option of disk utility.

  I tried to install 10.3 or 10.4 but with both of them, he never read the DVD

  I went on this loop has dozed times, I also tried the option key or command in fact all of the options that I could online, none of them gave me different results.

  I don't have the diskettes of origin provided with the computer as it was given to me.

  Thanks in advance

  If you use gray installation disks from another computer, it will not work. You shoukd probably get a detail of disk in Snow Leopard http://www.apple.com/shop/product/MC573Z/A/mac-os-x-106-snow-leopard

  You can use disk utility to partition as 1 partition using the GUID partition scheme and format as Mac OS Extended journaled. Then install OS X and update using software update.

• Maintenance/cleaning inkjet HP 7310 all-in-one.

  Hi all

  I have an HP Officejet 7310 all-in-one.  Model # SDOB - 0305 - 02 (MY5BOP85SD / Q3461A). I am running Win 7, SP 1

  I can't find my manual for my office move in different rooms of the House.  Long story!

  I was not held with maintenance as I should.  Now, I get a message that the printer is out of paper, just after filling it.  And when he picks up a leaf, it seems for once to the battery out of reach.

  Second problem I have is when I scan a document in color or an image.  There is a yellow stripe that goes down to the right of the sheet.  If I use gray-scale, I noticed a slight gray color.  I don't notice any different shading.

  The third question concerns the automatic document feeder.  He picks up several pages, or anything.

  Where can I download a copy of the manual?

  I would be grateful, and can anyone provide a fast Reader Digest version to solve the above problems.

  Very much appreciated.  Will write more on me later.

  Thanks in advance.

  Respectfully,.

  Bob

  Possible solutions to the problem #3 problem problem #1 link#2 link link.

  Manual is here.

• How to draw a bright line transparent effect

  Hello

  I'm trying to draw a white line bright through an image but stuck with how to get the effect.

  That's what I've done so far:

  

  That of what I'm trying to accomplish but line is straight:

  

  Thank you

  instead of treating your mesh as a subject in its own right with its own colours, think that it is simply something that changes what you have underneath. Just use gray with different opacities and blending modes (multiply for the shadows, screen for highlights.