Use the TV as a second monitor wireless

Similar Questions

• HP G60-549DX: use Smart TV as a Second monitor wireless

  Help a friend tries to use Smart TV as a second monitor.  Laptop can't find the TV - both are saved on the network wireless with MAC addresses.  I downloaded and installed the 5 recommended on the site of HP - drivers did not help.  Is it possible to do what the laptop is configured now?  If this isn't the case, upgrading Windows 10 would do the trick?

  Some SMART TVs equipped of a receiver widi or miracast built in. My LG does, for example. Upgrade to Windows 10 fair changes how you set up the cast he adds the capabilities of the wireless card. I note the laptop listed in your message seems to have a dual processor Pentium and I thought excluded Intel WiDi. If I understand correctly, you have sunk your laptop but have never been able to cast of older HP laptop of your friend. Chances are that this laptop is not capable of casting.

  There are inexpensive options of google (Chromecast) and amazon for wireless dongles that plug into the TVs HDMI port and can accept the casting of any wireless device.

• Use the ipad as a second monitor for Mac

  I remember using my iPad as a second monitor a couple of years, just as an exercise of "isn't this cool? Now, I really need, everyone remember this feature, or it was just a dream? Thank you in advance for your help! STF

  Given that the iPad is not a connector for a monitor, how is that going to work?

• what application would you recommend if I want to use my ipad as a second monitor for macbook please?

  What application would you recommend if I want to use my ipad as a second monitor for macbook please?

  http://www.ZDNet.com/article/Duet-display-turn-iPad-into-a-second-monitor-for-Ma c-to-zero-latency-review.

  It uses a wired connection of USP and so did not shift as applications that use wifi

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• Pull down menus, including bookmarks, become invisible when you use with firefox on a second monitor.

  All the drop down menus, including bookmarks, cut & paste and main menu of Firefox button, make invisible most of the time all in assets and using Firefox on my second monitor. It works normally on my primary monitor. The menus go invisible and any passage of the mouse to select an entry, they become visible for a split second and then distributed invisible. This makes it needless to say, by selecting the correct menu very difficult entry. It started to happening after the passage from Win XP to Win 7 with Firefox 5 and now still comes with 6. I have also put Firefox on my second monitor (Win 7) at home with no problems (version 5).

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

• Using a laptop as a second monitor?

  I bought a new laptop (Dell Inspiron 17120) and want to add a second monitor (between the two desktop sharing).  Is it possible to use my old laptop (Dell Inspiron 8600) as the additional monitor?  I have the cable and they are connected to each other and they say that they recognize the new monitor, but I can't get that to extend the desktop.  Any help would be greatly appreciated - even if it's to say that there is no way that the laptop can act as an additional monitor.  Thank you

  No, this is not possible.  There is no video input on your laptop so that it can be used in this way.

  "Brutto68" wrote in the new message: * e-mail address is removed from the privacy... *

  I bought a new laptop (Dell Inspiron 17120) and want to add a second monitor (between the two desktop sharing).  Is it possible to use my old laptop (Dell Inspiron 8600) as the additional monitor?  I have the cable and they are connected to each other and they say that they recognize the new monitor, but I can't get that to extend the desktop.  Any help would be greatly appreciated - even if it's to say that there is no way that the laptop can act as an additional monitor.  Thank you

• Why can't drag the DVDplay to my second monitor (TV screen)?

  I can drag all other programs (excel, TurboTax, internet explorer, etc.) to my 2nd monitor by double clicking in the upper part of the screen of the program open and then by dragging with the mouse.  But not the DVDplay (in Media Center). I want to watch the DVD on my TV while working on my laptop.  My second monitor is actually a Samsung 22 "LED TV.

  I could drag the media player, but the DVD plays in media player... He kept bufferingand does not display the entire screen at the same time.  The DVD plays well in DVDplay, but can't get it on the 2nd monitor.

  Hello

  Thanks for posting your question in the Microsoft Community.

  The description of the problem, it seems that you are unable to play a DVD on Windows Media Player in the 2^nd monitor.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. What is the format of the video file you are trying to play?

  3. have you made any recent hardware or exchange of software on your computer before this problem?

  4. What is the version of your Windows Media Player?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to download and install the plug-ins and Add-ons to Windows Media Player on the link below and check.

  Plug-ins and Add-ons for Windows Media Player:

  http://Windows.Microsoft.com/en-us/Windows/Windows-Media-Player-plug-ins

  Method 2:

   

  Follow the steps in the link below.

   

  Play an audio or video file: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

   

  Method 3:

   

  Install the latest codec from the link below:

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

   

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  For reference:

   

  Information on the types of media files that supports Windows Media Player:

  http://support.Microsoft.com/kb/316992?WA=wsignin1.0

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Can I drag to the left on a second monitor?

  I am currently using the option in the second screen, but it works only when I drag to the right (from my laptop to the monitor of the PC on the left side).  Ergonomic, I would have preferred that it works with my PC monitor to my left, but I can't drag it to the left.  Is there a setting I can change to fix this?

  If I understand you, the PHYSICS of the monitors available you configure is does not correspond to the VIRTUAL page layout. Heh

  If so - when viewing the "screen resolution" where it shows the monitors multiple (in the virtual) - click (and hold down the mouse button) on one of the monitors and drag it to the place that represents the physical reality.

  

• Qosmio X 70-how use the GPU nVidia for external monitor

  Hello guys,.

  Can I use my card for an external monitor, BenQ Xl2420t geforce?
  Vga and hdmi only goes for the graphics card intel

  Try to solve this sequel to this workaround:
  Start Notepad in safe mode and uninstall the Nvidia driver.
  Then restart and reinstall the driver again.

  Some people have been able to solve this problem, but don t tell me why it worked, but it did.

• Qosmio G35-av600: how to use the display internal as a monitor using composite-in?

  I want to connect my video gaming system and use my laptop screen, but I can't seem to understand how to change the settings so that my monitor displays the video game? Composite in the settings?

  I have a G35-av600 bought last June. If anyone has any suggestions, let me know

  Hello

  I don't know if I can help because I know something about the Qosmio G10 and the G20 and your Qosmio seems to be a mobile US but I will try my best ;) m

  Qosmio G10 for example, you must modify the input parameters in the Toshiba utility image of development, but I guess you don t have this tool pre-installed.

  But I think that the composite is a good Butler built the connection with the game station.
  I think that in the advanced graphics settings, you should be able to find the right options.

  Play around with the settings.

• How can I connect HDTV and LCD to PC using the two - as a dual monitor.

  I recently bought the PC HP Pavilion a6600f w1707 with HP. I also bought a DVI cable to HDMI to connect PC to Samsung HDTV. I can use the VGA cable to connect the monitor and cable DVI to HDMI to connect to HDTV, but log off for the other use. Is it possible to configure Windows Vista Home Premium to display on both screens at the same time, or at least be able to switch between the two without having to unplug one, then restart the computer?

  This can be annoying, but I've done it before.  Usually, you can connect at once, then go to the display panel, settings, advanced, and then there is usually a tab to select the components of the video card.  Mine says NVIDIA...  Once there, you can choose a number of options, for example, clone, extended desktop, etc..  I found that there is some problems with resolution when the display on my TV is over the current screen.

• Using the function tablet and external monitor at the same time

  Hello

  I was hoping with the docking station and the external monitor, I can work as with an ordinary computer and at the same time to use the computer screen Tablet laptop to take notes with Journal (extended desktop display).

  Unfortunately, when I touch the screen with the stylus, it is still planned for the external monitor - no matter what I set as main display it seems just really stupid.

  Does anyone have an idea how to prevent this?

  divB

  I've updated to the latest official drivers from the Wacom homepage (not Lenovo-, they are old!) and it seems to work!

  I hope he'll stay until now.

• Using the two connections of cable and wireless on a laptop Windows 7

  I have a wireless router on my home network, which works very well.  Sometimes, I connect my laptop with a wired connection for faster speed during file transfer.  When I do that, I have 2 network connections: Wi - Fi and wireless.  Should I disconnects me wireless connection, or is it possible to have both connections at the same time?  Is it possible to configure Windows 7 to disconnect the wireless when it detects a wired connection?

  Thank you.

  It's OK to have two connections.  Windows automatically uses the one with the highest rated speed.

  I don't know how to have it automatically disconnect one of them. Steve Winograd, most Microsoft Valuable Professional (desktop experience)

• Force the VM to use the wired ethernet port instead of wireless

  Hello

  I use ver 9 workstation.  I have my host computer (win 7 64 bit) connected to our network of offices using the connection with wireless computers.

  I use a windows xp based virtual machine image that connects to devices of 3rd party via the ethernet port wired in Bridge mode.

  Is there a way to force the workstation on the use of only the cable connection and don't EVER try to connect via the wireless?

  At the moment I have to disable the wireless for the workstation to access cable port, if the without wire is activated, so you may not see anything on the wired port...

  It also causes headaches with ip address conflicts (3rd devices use the same IP range as our network of offices) if I don't have the VM running and wireless power.

  Any help or advice would be appreciated

  Tim

  Use the virtual network Editor to bind to the target adapter for VMnet0 and set the NIC of the virtual machine to use connected by a bridge.