User with more than one email address

Similar Questions

• 5.2 ACS with more than one IP address

  Hello

  My question is simple, but yet I can't find a document that meets. I want to install an ACS 5.2, and the customer wants to have a separate management interface. The 1121 device has 4 network cards and got the label of Mgmt on this subject. However, when I try to set a second interface, it is said that only a single IP address must be configured.

  Can someone point me to a document where it is said, so I can go back to the customer with a backup solution with a document?

  Thanks in advance.

  Javier

  I can share that this capability will be supported in version 5.4 of the CSA which will be available in a few months

• BlackBerry Q10 my answers in a text message to go to more than one email address

  When I answered (answer) some of my text messasges the answer goes to the recipient and to others who were not included in the response message.  Sometimes they went to addresses that are not in my contact list.

  Is there a solution to this?

  John

  Looks like you have received a text of the group. You respond to what you think is a physical person but you meet the group, and so will your answer to several people on the original text of the group.

• How can I associate my rt surface with more than one account of sky drive

  How can I associate my rt surface with more than one account of sky drive.

  You will need to create a new account on the computer by using the Microsoft Account associated with the other SkyDrive.

  To create a new user, open laptop settings, in the general section, click 'add a new user '.

• How to list all the vm with more than one network card?

  Hello

  Is it possible to only list all my s vm in my environment with more than one network card?

  I tried using the Get-NetowrkAdapter cmdlet, but could not get the desired results.

  Get - VM | Get-NetworkAdapter | Select-Object Name. ConvertTo-HTML-head $a - body "Virtual Machines < H2 > < / H2 > ' | Out-file D:\vms.htm

  Thank you

  Hello, AGFlora-

  Of course, you can do this with the standard as cmdlets:

  ## using standard cmdletsGet-VM | Select Name, @{n="NumNICs"; e={(Get-NetworkAdapter -VM $_ | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Or, if you want to get the results a little (or a lot) more quickly, you can use the cmdlet Get-view as:

  ## fast-like, using Get-ViewGet-View -ViewType VirtualMachine -Property Name,Config.Hardware.Device | Select Name,@{n="NumNICs"; e={($_.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualEthernetCard]} | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Those are both by selecting the names of virtual machines and their number of network cards.  Then you can direct this output to Export-Csv, ConvertTo-HTML, what you like.  What to do for you?

• When you subscribe to creative Cloud(Photoshop and Lightroom), that come with more than one license, and is it possible to install it on Windows and Apple (if it comes with two licenses)? Thank you.

  When you subscribe to creative Cloud(Photoshop and Lightroom), it does it with more than one license, and if so, is it possible to install on Windows and Apple OX? Thank you.

  A Cloud subscription provides for the installation of facilities to work on both machines.  You can have (Windows and Apple OX) operating systems.

• LRT224 impossible to deal simultaneously with more than one VPN tunnel?

  We have configured a client to gateway VPN tunnel group and six in the tunnels of single user gateway on a LRT224. Each unique connection works perfectly using Shrew soft client. But when we try to connect with a second tunnel, the first tunnel disconnects. It seems that the LRT224 cannot process more than one VPN tunnel at the same time? Is there any configuration, that we would have missed?

  TLR log seem to indicate that the Shrew Soft customers use all 192.168.30.0 that their IP address instead of a random IP address in this range.

  Try to set each Shrew Soft client with a specific IP address in the 192.168.30.1 - 50 rank instead of ' use virtual adapter and address randomly.

• Create interactive files with more than one URL

  Hello, here's my problem: I want to create more than one instance of button ranging from the different URL address. The Adobe video workshop, I got the code:

  interactive_test.addEventListener (MouseEvent.CLICK, buttonClickHandler);
  function buttonClickHandler {}
  navigateToURL (new URLRequest ("http://www.adobe.com"));
  }

  This works very well with the one button instance. When I copy and paste the code to another instance of the button, that is to say:

  butn1.addEventListener (MouseEvent.CLICK, buttonClickHandler);
  function buttonClickHandler {}
  navigateToURL (new URLRequest ("http://www.adobe.com"));
  }

  butn2.addEventListener (MouseEvent.CLICK, buttonClickHandler);
  function buttonClickHandler {}
  navigateToURL (new URLRequest ("http://www.adobe.com"));
  }

  I get 1021 in dual function error. I think I understand what is wrong in principle, but don't know how to fix it. MyI knowledge of ActionScript 3 is equal to zero. What I need is the code example that works that I could copy and paste, with the appropriate changes.

  Thanks in advance for your help, Richard

  Use different function names, or flash won't know which function to use:

  butn1.addEventListener (MouseEvent.CLICK, buttonClickHandler1);
  function buttonClickHandler1(event:MouseEvent):void {}
  navigateToURL (new URLRequest ("http://www.adobe.com"));
  }

  butn2.addEventListener (MouseEvent.CLICK, buttonClickHandler2);
  function buttonClickHandler2(event:MouseEvent):void {}
  navigateToURL (new URLRequest ("http://www.adobe.com"));
  }

• Video is de-energized when on a call with more than one person

  Hello

  When I'm a Skype call to a video person works very well, but when there is more than one I can no longer see the other participants. There is also no button to end the call and the only way to get out of the call, it's be quiting Skype and it starts again.

  It used to work in the past and Skype was great if not sure whats going on. I'm on Win 10 64-bit with Skype version 7.25.0.106

  Someone at - it ideas?

  Your Skype is not always connected to the Cloud server.

  The correct State shall be:

  Status: NetStateConnected

  Check your hosts filein Windows, DNS/VPN/proxy settings.

  Try first to reset your Windows hosts file:

  https://support.Microsoft.com/en-us/KB/972034

• Tabular report with more than one line by line

  Hello
  
  I designed a sort of Gallery page, a tabular report with only two small columns per line: a thumbnail from a BLOB column and link textual branching to a page showing the full size image with a bunch of textual information on this subject.
  
  As you can guess I look at the title of the topic, my concern is to display more than one (say 3 or 4) this line by line, in order to avoid a very long 'portrait' page with a lot of white space on the left and right.
  
  Is there a (not too complicated) way to do it? I might design a special model (?), but I'm not very used to style sheets and stuff.
  
  Thanks in advance.
  
  André

  Re: report columns of the SQL query for a couple of ways to do this.

  As your main concern is to maximize the use of horizontal space, custom report template/CSS approach would seem more appropriate, as the number of columns is not resolved.

  It is also possible to do using CSS inline-block property and given that it is now feasible cross-browser and less side effects and potential problems that the use of floats is probably the way to go.

• Select Date Max with more than one result

  Hello;
  
  I need to write a query that returns the maximum date for a specific transaction that is not a problem, but my problem occurs when I have several transactions with the same date max trans.
  
  
  Can someone help me write something which will return only one record from a result set that has more than one record
  
  Example:
  
  TRAN_ID - LAW #-TRANS_DATE
  -272-1111111-29/10/1999 00:00:00
  -273-1111111-29/10/1999 00:00:00
  -274-1111111-29/10/1999 00:00:00
  -275-1111111-29/10/1999 00:00:00

  You are referring to your alias at the wrong level, try this:

  select * from (
  select account_transaction_id,
         account_number,
         max_days_in_arrears,
         trans_date,
         row_number() over(partition by account_number order by trans_date desc, account_transaction_id desc) as rn
    from account_transaction atr
   where max_days_in_arrears > 90
     and account_number in (100026, 121189, 100223)
     and trans_date = (select distinct max(trans_date)
                         from account_transaction
                        where account_number = atr.account_number
                          and max_days_in_arrears > 90)
   order by account_number, trans_date
  )
  where rn = 1;
  

  and use code tags please, so that your queries can still be read easily and quickly for us to understand.

  Published by: hoek on March 23, 2009 15:48

• How can I search for files with more than one keyword?

  I ve created a few keywords, and some files in my folder are marked by two, three or more keywords.

  Is it possible to search for files by using more than one keyword in the search field?

  Thank you!

  Use the command find (Edit menu) and in the criteria on the side right is a plus sign to add another criterion and set it to your personal wishes.

  Choose from the results and you should be OK

• Why I can't add more than 195 email addresses to blocked emails section

  My Yahoo Server allows to 500 addresses be added to the blocked section but I can't add more than 195 - why is this and how I overcame this problems I received many many spam

  Hi Leopold,

  As you use Yahoo mail, I recommend you contact Yahoo support for assistance.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information.

• How to create an entity with more than one primary key.

  Hello

  JDeveloper Version 11.1.2.4.0

  I am trying to create an entity object based on a table with 5 columns. The combination of them is unique.

  I do the five columns of primary keys, but when I delete a line I: RowAlreadyDeletedException, although always the line exists in the database.

  Also displaying the view sometimes I get Houston-25019: line entity oracle.jbo.Key [1 key 2 null null NULL].

  
  

  
  

  How to create an entity based on one object several columns in the primary key?

  I don't want to add an additional column to a primary key, because this table is used in many PL/SQL procedures, and I'm not sure that this will not affect the.
  

  Also using Rowid as a primary key should be avoided.

  Kind regards

  Pamela.

  As I said, the framework is not like that

  Check this old (but still relevant) blog of Sung Im on Table Whose Primary Key entity object can be NULL

  describing the reason behind the behavior you're seeing and the way around.

  Or you use the secondary key rather as described here Wael Abdeen Blog, how to look at the views - part 2 | Oracle ADF as a secondary key composed of more then one column can have null values.

  Timo

• User for Lightroom on Imac with more than one user license

  I use an Imac which my wife and I share. It can install lightroom on his user without us having to buy another license to use? I hope someone can help...

  The owner of the license may install and activate on 2 computers, as long as only one is used at a time

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)