Usernames kill examines and writes texts.

Similar Questions

• Control Panel and write text

  Hello everyone

  I am new to this software, then, I have two question

  1. I have a panel that contains strings, I've set up some parameters to test, but I found I have to set these channels each time after I restart this software, are there ways to save these settings?

  2. I'm reading some data of machines, so I add an entry to the file of the measure and it comes out of a *.lvm, I open it by txt, in the txt that it looks like:

  Comment Untitled X_Value
  0.000000 147.970000

  can I adjust the number left in some letters? To more clearly display the user

  xyq102296 wrote:

  Hello everyone

  I am new to this software, then, I have two question

  1. I have a panel that contains strings, I've set up some parameters to test, but I found I have to set these channels each time after I restart this software, are there ways to save these settings?

  There are several ways to define and recall settings panel, but one that meets your needs without doubt is to simply right click on the table > data operations > use current default value.

  I'll let someone else answer #2. I do not use anything to file measure - I always roll my own file writter.

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I update my iMac and then the computer restart again and write this means to report panic about what I can do?

  Hi, I'm updating my iMac and after that it restart again and write this panic report. Pleas if somebody know what can I do please help me

  Anonymous UUID: F566129E-3EB9-4E28-4DF3-63D440FEBBB2

  Kills Jul 26 14:32:01 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff800dbb3bf2): "pointers element of invalid queue for 0xffffff8024cb0a40: 0 0"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.60.10/osfmk/kern/queue.h prev: 241.

  Backtrace (2 CPU), Frame: Return address

  0xffffff918935b440: 0xffffff800dadab52

  0xffffff918935b4c0: 0xffffff800dbb3bf2

  0xffffff918935b640: 0xffffff800db508dc

  0xffffff918935b710: 0xffffff800dae430a

  0xffffff918935b750: 0xffffff800dfa228e

  0xffffff918935b790: 0xffffff800e004324

  0xffffff918935b7d0: 0xffffff800dfee5da

  0xffffff918935b7f0: 0xffffff800dd383e8

  0xffffff918935b830: 0xffffff800dd37fa8

  0xffffff918935b890: 0xffffff800dd26ea7

  0xffffff918935b8f0: 0xffffff800dd1a79f

  0xffffff918935b9a0: 0xffffff800dd06358

  0xffffff918935bbe0: 0xffffff800dd06e70

  0xffffff918935bf60: 0xffffff800e028380

  0xffffff918935bfb0: 0xffffff800dbeca58

  The process corresponding to the current thread BSD name: AdobeUpdateDaemo

  Mac OS version:

  15G 31

  Kernel version:

  15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

  Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

  Slide kernel: 0x000000000d800000

  Text of core base: 0xffffff800da00000

  Text __HIB base: 0xffffff800d900000

  Name of system model: iMac12, 2 (Mac-942B59F58194171B)

  Availability of the system in nanoseconds: 94483899823

  last load kext to 53361190473: com.apple.driver.AppleBluetoothHIDKeyboard 181 (addr 0xffffff7f8fadd000, size 16384)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 110.22.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleBluetoothMultitouch 90.3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 274.12

  3.12.8 com.apple.driver.ApplePolicyControl

  com.apple.driver.AppleHDAHardwareConfigDriver 274.12

  com.apple.driver.AppleHDA 274.12

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.kext.AMDFramebuffer 1.4.2

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.AMDRadeonX3000 1.4.2

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  3.12.8 com.apple.driver.AppleMuxControl

  com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.kext.AMD6000Controller 1.4.2

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.iokit.IOBluetoothUSBDFU 4.4.6f1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleIRController 327,6

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleFWOHCI 5.5.4

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.AppleHIDKeyboard 181

  com Apple.kext.Triggers 1.0

  com.apple.driver.IOBluetoothHIDDriver 4.4.6f1

  com.apple.driver.AppleMultitouchDriver 304.12

  com.apple.driver.AppleHIDTransport 5

  com.apple.driver.DspFuncLib 274.12

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.3

  com.apple.iokit.IOAcceleratorFamily2 205.11

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.iokit.IOBluetoothFamily 4.4.6f1

  com.apple.driver.AppleHDAController 274.12

  com.apple.iokit.IOHDAFamily 274.12

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac12, 2, IM121.0047.B23 of BootROM, 4 processors, Intel Core i5 2.7 GHz, 12 GB, MSC 1.72f1

  Graphics card: AMD Radeon HD 6770 M, AMD Radeon HD 6770 M, PCIe, 512 MB

  Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020

  Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020

  Memory module: 0/DIMM1 BANK, 4 GB DDR3, 1333 MHz, 0 x 0198, 0x393930353432382D3035312E4130304C4620

  Memory module: 1/DIMM1 BANK, 4 GB DDR3, 1333 MHz, 0 x 0198, 0x393930353432382D3035312E4130304C4620

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  USB Device: Card reader

  Bus crush: iMac, Apple Inc., 22.1

  First remove all the third-party RAM installed on the computer and re - built-in. Then, restart and test, whether the KIMBERLEY process continues to have a barrette of faulty RAM MEMORY.

  Finally, what third party RAM brand has been installed? In these forums, because the iMacs are sensitive and benefit from the high quality of RAM, the Crucial two (buy it direct) and the two OWC (www.macsales.com) RAM are recommended because of their high quality and reasonable price. You can also have another hardware problem, in your case I would try to boot from the Partition Recovery (command + R to start) and open disk utility to see if the boot disk is found. You can also use Apple Hardware Test or Apple Diagnostics according to the age of the computer to run a test to see if two applications can detect any material error.

• Hypervisor-HyperTerminal: how to write texts in HyperTerminal to a VI in real-time

  I use on my PXI system hypervisor. With 'Specifications to build', I built my RT application in a standalone rtEXE file and set it as start VI for my RT system. It seems to work, since I have received information from my "hypervisor-HyperTerminal" while restarting the RT system.  He writes, "Startup Application: d:\ni-rt\startup\RTMain.rtexe. However, I don't see how my RT application is running or if an error occurs.  Therefore, I think to write texts or my RT application information to the HyperTerminal.

  I wanted to use VISA to the serial port of the HyperTerminal on the side-access system in real time. I used the example LabVIEW "basic series write and Read.vi ' to 'smplserl.llb '.  Under the system in real time, I found only a single resource VISA name, which is "COM1".  Apparently, I can write successfully texts at the port "COM1", because no error was shown in the example VI. But the texts do not appear on the HyperTerminal.

  Do you have an idea, what I did wrong in my attempt, and how I had to do it correctly? Thank you very much.

  Kind regards

  Scarletice

  Hello Scarletice,

  You can use the Debug String VI (http://zone.ni.com/reference/en-XX/help/370622J-01/lvrtvihelp/rt_debug_strings/) RT a message programmatically to the console at the time on a Real - Time Hypervisor system LabVIEW Real-time.

  Please let me know if you need additional help, and have a nice day!

  Best regards

  Casey Weltzin

  Product Manager, LabVIEW Real-time

  National Instruments

• Impossible to write TEXT in the email (Hotmail)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello Corine Patel,

  1. what exactly happens if you write text in email?
  2. what web browser do you use?
  3. were you able to write the text earlier?
  4. doesn't this problem only occurs with hotmail, or other webmail programs?

  If you use Internet explore and the problem is that with hotmail and then, you can try these links provided below.

  HOW to optimize Internet Explorer for Windows Live Hotmail
  http://windowslivehelp.com/solution.aspx?SolutionID=3c7c3338-369E-4220-B29D-71ce660fe5a0

  Solutions for common problems of Hotmail
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  Forums Community hotmail post specific questions from Hotmail here!
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Tutorial for file i/o (read and write)

  Hello

  Just moved air of c#. My co. has decided to buy 500 Playbooks and now came and asked me to 'do' integration to our CRM (and preferably be prepared after lunch), so here I am.

  In any case starting out in the small and already seem to have a few problems of language.

  Had a look at the API reference and thought flash.filesystem.file would be the way to access directories and create and edit local files on the Playbook. But all my attempts have failed. So I wonder if anyone here have seen certain types of file tutorial for Dummies?

  I'm now looking to create and modify a file in the documents folder, but it is still the programmingly Documents folder have been a challenge for me (Yes call me noob at the moment).

  Oh yes, make Flash Builder / QNX have something akin to a datagridview?

  Thanks in advance.

  Maybe this example file will help you:

  var file:File = File.documentsDirectory.resolvePath("text.txt");
  var stream:FileStream = new FileStream();
  stream.open(file, FileMode.WRITE);
  stream.writeUTFBytes("line 1");
  stream.close();
  

  It opens (or create) a file text.txt in the documents directory and writes the string line 1.

  There is nothing that resembles the DataGridView I'm afraid, but you're not the first to this problem. You can find similar topics in this forum like this.

• How to draw a straight line and write on areas colored with Photoshop?

  I need to be able to draw a straight line and write about areas that I colored. I could do in PhotoStudio, but I don't know how to do in Photoshop.

  Use layers.  Text for writing on areas layers.  They can be changed.  You can change the text, font, size, color, Position, fusion and opacity and a layer style can be added.

  To draw the limes add a blank layer.  Select a brush and the color.  Left-click on one end of the line you want to draw. So without and the button to move the cursor to the other end of the line and press SHIFT + left.  Photoshop will draw the straight line between the two points that you clicked on.

  

• Extract PDF form data using JavaScript and write in the CSV file

  I received a PDF file with a form.  The form is * not * formatted as a table.  My requirement is to extract form field values and write into a CSV file that can be imported into Excel.  I tried using the menu item "Merge data from spreadsheet files" automated in Acrobat Pro, but the release includes both the labels and values.  I'm mostly just interested in the form field values.

  I would use JavaScript to extract the data from the form and learn JavaScript write CSV file (since I know what should look like the spreadsheet of end).  I got regarding the extraction of the fields in the form:

  this.getField("Today_s_Date").value;

  And the rest of this post: http://StackOverflow.com/questions/17422514/how-to-write-a-text-file-in-Acrobat-JavaScript , I tried to write to CSV using:

  var cMyC = "abc";

  var doc = this.createDataObject ({cName: "test.txt", cValue: cMyC});

  but I get the following error:

  "SyntaxError: syntax error".

  1:Console:Exec ".

  Ideally, I don't want to use a third-party tool online to make, because the data are sensitive.  But please let me know if you have any suggestions.  The ideal output is a CSV file that an end business user can open in Excel to see the format of spreadsheet of his choice.

  Did anyone done this before?  Open to hearing alternatives as well.  Thanks in advance!

  The code you have posted works fine for me in the JavaScript console, so I suspect the problem is something else. Where did he put the code and y at - he seized another code?

  In addition, if CSV is not a strong requirement, I would say that you use delimited by tabs instead. Fields normally cannot contain tab characters, this is a good qualifier to use. It will be also more reliable when you import in Excel. If you need to process the field data that may contain quotes, you need prepare correctly the string data and can use a JavaScript library like this: https://github.com/uselesscode/ucsv

• How to validate and save the values to a combo box and two text boxes in flex4 mxml application with as3

  helllo all,.

  I'm working on the application web flex4 with as3.

  I have a doubt, I've created a mxml it has two text boxes, except the button and a combo box that is has two option as a percentage and the amount.

  my needs are I gave here.

  need 1: when I choose option amount that two text boxes does not have to be editable.when I select text tat box two percentage option will be editable.

  need 2: when I select the percentage in combox option and two text boxes are empty, and then click the button Save-> I want to display warning msg

  need 3: when I select the option amount combox and the two boxes are emptu click the button Save-> I don't want any warning messages.

  How to validate it and how to write backup for this function.

  any suggession or extract code is welcome.

  Thanks in advance,

  B.Venkatesan

  Looks like you are trying to do too much at once. Try to hang the events correctly

  The close event of the comboBox can do something like this

  protected function toggleTextEditing(event:DropDownEvent):void

  {

  If (this.optionCmb.selectedItem.label is "Percentage")

  {

  This.Text1.editable = true;

  This.Text2.editable = true;

  }

  Else if (this.optionCmb.selectedItem.label == "Number")

  {

  This.Text1.editable = false;

  This.Text2.editable = false;

  }

  }

  The button's click event can do something like

  protected function save(event:MouseEvent):void

  {

  If (this.optionCmb.selectedItem.label is "Percentage")

  {

  If (this.text1.text == "" & this.text2.text == "")

  {

  Alert.Show ("text is empty");

  return;

  }

  on the other

  {

  }

  }

  Else if (this.optionCmb.selectedItem.label == "Number")

  {

  }

  }

  If you can put in your entire code, maybe I can have a look to see if I can find something wrong with that.

  -Pramod

  http://www.flexmycode.com

• High Score Table: writing a Simple with Flash and PHP text file

  I'm having a problem getting Flash to work with PHP that I need Flash to read and write to a text file on a server to store data simple name partition for a games Hi score table. I can read the text file in Flash fairly easily, but I also have to write to the file when a new high score is reached, so I need to use PHP to do that. Can I send data from flash to php by POST file, but so far it does not. The PHP file is confirmed that the work that I added an echo in the file that displays a message to verify that the server is running PHP - files were also uploaded to a remote server so I could test them correctly. Flash code is as follows:

  FileWriter php

  var myLV = new LoadVars();

  sendData() {} function

  //sets variable 'hsdata' to send to php

  myLV.hsdata = myText;

  myLV.send ("hiscores.php");

  }

  I believe that it sends the variable "myText" in the php file in a variable called 'hsdata' I want the php file to write to a text file. The mytext variable is just a long chain that has all of the partitions and the names in the scores. OK, XML would be best way to do it, but for the speed, I want to just get the basic features of work, so store a shot of simple text is sufficient for now. The PHP code that reads the Flash variable "hsdata" and wrote for the "scores.txt" text file is due to:

  <? PHP

  sets the variable to the data posted from flash

  $flashdata = $_POST ['hsdata'];

  File Manager opens the file and clears all content with arg w

  $fh = fopen ("scores.txt", "w");

  Adds data to the file

  fwrite ($fh, $flashdata);

  closes the file

  fclose ($fh);

  echo "php file works;

  ? >

  Any help with this would be greatly appreciated - once I get php to write text files simple I should be ok. Thank you.

  var outLV = new LoadVars();

  var inLV = new LoadVars();

  sendData() {} function

  outLV.hsdata = 'Hello from Flash';

  outLV.sendAndLoad ("http://www.mysite.com/hiscores/test23.php", inLV,"POST");

  }

  inLV.onLoad = {function (success)}

  If (success) {}

  sets the dynamic text box to show the variable sent by php

  statusTxt.text = this.phpmess;

  } else {}

  statusTxt.text = 'No Data Received';

  }

  };

  It works well and function of inLV.onLoad of the reports it receives data, but does not display the variable received from PHP. The PHP file is like this:

  <>

  $mytxt = $_POST ['hsdata'];

  $myfile = "test23.txt";

  $fh = fopen ($myfile, 'w');

  Adds data to the file

  fwrite ($fh, $mytxt);

  closes the file

  fclose ($fh);

  $mess = "Hello there php ';

  echo "phpmess =". "." $mess;

  ?>

• [LIKE, CS4] Import and export text file that contains the tag: encoding problem

  Hello

  I have a script that exports a text selection into a temporary folder (Unicode) text file with label. This file is then loaded in a variable AS and transformed line-by-line for some changes to the text. Subsequently a new text file with the modified content is written.

  Up to CS2 (and 10.4 PPC) this script worked like a charm. He stopped working with the new system and Intel. Meanwhile, I discovered that it must have something to do with encoding problems. «Everything in the old writing with ' as a unicode text "forced a mistake (since AS 2 each text is processed as UTF - 16), so I changed these lines to ' as text '.»

  In addition, I realized, that InDesign exports to tag text Unicode like UTF-16 (little endian), but importing tagged text to UTF-16BE (big-endian). "As variables and" write iconv ' command uses MACROMAN, so I added a few conversions with ""and it worked.

  Unfortunately the last conversion of MACROMA in UTF-16BE converts all spaces in the output string en normal spaces.

  I am therefore a little at my end of the problem. Can someone help me please?

  See you soon

  Tobias

  [InDesign 6.0.4 with AppleScript on Mac OS v2.0.1 X 10.5.8, Intel]

  A code for the relevant parts:

  Export as referenced text selection:

  on TMPexportTaggedText(myFileName, myText, myEncoding)
      tell application "Adobe InDesign CS4"
          tell tagged text export preferences
              if myEncoding = "ascii" or myEncoding = 1 then
                  set character set to ASCII
              else if myEncoding = "ansi" or myEncoding = 2 then
                  set character set to ansi
              else if myEncoding = "unicode" or myEncoding = 3 then
                  set character set to unicode
              else if myEncoding = "jis" or myEncoding = 4 then
                  set character set to shift JIS
              else if myEncoding = "gb" or myEncoding = 5 then
                  set character set to GB18030
              else if myEncoding = "ks" or myEncoding = 6 then
                  set character set to KSC5601
              else
                  set character set to ansi
              end if
              set tag form to abbreviated
          end tell
          export myText format tagged text to (myFileName) without showing options
      end tell
      tell application "Finder"
          try
              do shell script "iconv -f UTF-16LE -t UTF-16 " & (POSIX path of myFileName) & " > " & (POSIX path of myFileName) & "1"
              set myFileName to myFileName & "1"
          end try
      end tell
  end TMPexportTaggedText
   
  

  Line and placement in InDesign (circleLines not the textual changes and throw a string with):

  set theOutput to my circleLines(IN_File & "1", myOptions)
      
  if theOutput ≠ "" then
    tell application "Finder"
      open for access file (OUT_File & "1") with write permission
      write (theOutput) to file (OUT_File & "1")
      close access file (OUT_File & "1")
      try
         do shell script "iconv -f MACROMAN -t UTF-16BE " & (POSIX path of (OUT_File & "1")) & " > " & (POSIX path of OUT_File)
         do shell script "cat " & (POSIX path of OUT_File) & " | tr '\\n' '\\r'"
      end try
    end tell
  end if
      
  place (OUT_File) on curSel without showing options
  
   
  

  The string output with

      write (theOutput) to file (OUT_File & "1") as unicode text
  

  an error of InDesign (bodychecking).

  The problem is not as long as ID's export is little-endian - someone ' one has not heard of Intel chips - but it does not add a byte order mark. If you add a BOM, the problem should go away. Here's how you can add a Bill adapted to an exported file to tag:

  the fileRef value (open for access file "Macintosh HD:Users:shane:Desktop: Untitled - 16.txt" with write permission)

  the value of x to read fileRef

  Set x to character id {711, 731} & x - add THE BOM

  write x to fileRef starting with 0

  FileRef close access

  Then you can read it using "text Unicode", and it should also cross-platform very well.

  And stop putting your file read/write inside blocks Finder - is not the business of the Finder.

• discretionary hyphens and question text cursor movement

  When I add optional hyphens

  Words and then use the cursor keys to navigate, it moves on the discretionary hyphens as of the individual characters. Is this correct? To ignore this what I do write a keyboard Manager to treat or is this a bug?

  This is how it works - TLF is not clear how the DH has been placed and allows editing of them without special treatment.  Users can insert a DH with ctrl-shift-hyphen.

  If you want custom handling you need to develop a method - they keyboard Manager can operate - it is much simpler if you work only with horizontal text of LTR.  The keys are interpreted in the physical sense for RTL and vertical text.

  Richard

• Just updated to IOS 10 and replace text does not work

  Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

  I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

• Can I select and copy and paste text from a browser with the pencil of Apple?

  With the pencil of Apple on a new iPad Pro, I am not able to select, copy and paste text from a web page in Chrome or Safari. Y at - it a special order? A related question (not with a pencil): how to save files in PDF format.

  Well, it seems to be workin now. Never mind.