Using a custom converter and textSelectedColor

Similar Questions

• Can I charge my iPad using a voltage converter and an outlet of 50 Hertz in Europe?

  IF I want to reload my iPad in a foreign country with 230 v AC and 50 hertz can do with a (at 115 v) voltage converter and still using 50 Hz instead of 60 Hz? Who will work ok without damage to the iPad?

  If you use the charger supplied with your iPad, it will switch automatically. You may need an adapter outlet such as those at Travel Kit for the Apple world.

• Use a custom in a map icon

  I created a custom font, which consists of 15 simple icons. Each icon is mapped to a unique position. For example, type "A" produced the first icon, typing a 'B' produced the second icon, etc. The police is an OpenType font, and it works fine in all my office applications. I would like to use this font on a map.

  I downloaded the files of OTF provided this font custom that another police OTF (km) text content & Layouts > fonts.

  I have a card that contains 2 fields of text box: Description and title. Description use my custom font, and the title used by the police of km.

  In collections that are mapped to this card, I have an 'A', 'B' or 'C' in the Description field, and my title of the current collection in the field. So I expect that there would be an icon appears on the first line of the card, followed by the title of the collection displayed in km on the second line.

  But the police of the icon does not display the icon. It shows only a capital A, B or C. The title of the map by using the font of km appears correctly.

  Isn't this possible? I'd wait the police icon to work properly, since the system has no way of knowing that the 'A' looks different than a usual A, B looks different from a and B, etc.

  Also, I tried this visualization as my Preflight custom app that my application development custom iOS and Android.

  I got this to work, but 2 things I learned, in case anyone has the same problem:

  1. the police I used was a police custom that I created that had only a single character (a capital ' A') that I created for the test. Until I filled the police with the characters A to Z and a to z, the police gave a strange error message when you try to use the font in a card.

  2 as Nathan said, you must rebuild the application after adding a font. I had forgotten that.

  FWIW, I used the excellent "Indyfont" script for InDesign to quickly create an OpenType font containing the 15 special icon characters we need. Has no time at all to create the font. See Indiscripts: already

• I have adapters and a power converter, but has been told by someone who travels internationally that the block performs the conversion of power for me.  I want to assure that I do not blow on my phone.  Use the power converter to charge my iphone and appl

  I have adapters and converter of power for international travel.  I was told by someone who often visits that the converter is not necessary for apple products.  I don't want to ruin my phone or watch - can I use my power converter?

  If you use the Apple adapter supplied, you will simply need an adapter to use in other countries. The adapter can be used with voltages between 100-240 v AC 50-60 Hz

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• my privacy setting is stuck on do not forget history, won't stay on using the custom settings for history, after I've selected and click ok

  When I go to tools, Options, privacy and "Use the custom settings for history" of the value and then click on OK it won't save. It remains on "Remember history", even if she never will save "remember history" as I tested it. It seems if be produced after these recent last Firefox update. Anyone know why I can not choose "Use the custom settings for history", as is the parameter I want to use?

  Why aren't satisfied with the history settings by default that you currently have?

  Any changes (for example, to disable the cookies third party or form not given memory or keep cookies until you close Firefox and make an exception for the cookies you want to keep) that you will cause "use... custom parameters. "to be selected if you really want to see.

• How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards

  I have a T610 HP Smart Thin Client from scratch and I get zero Smart software to recognize the card chip when connecting. How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards. You can configure without the profile HP of the XML editor.

  Mike Sieradzki

  Hello ski_mike.

  Welcome to the HP Forums. I understand that you want to support with your Smart Client zero. However, it is a commercial product. To get assistance, thank you for posting your question on the business Forums HP: HP Enterprise Business Community

  Thank you

  Mario

• Scanner HP 5300 flat and I would use it to convert a significant number of 35 mm slides.

  I have a scanner of HP 5300 and I would use it to convert a large collection of slides from 35 mm to digital files. I believe that an accessory is needed to do this, is that correct? Where could I buy this accessory and the cost? Thank you.

  Hello

  I don't think that you can not find it anywhere. The results will not be large and VERY SLOW. Why not buy something like one of them?

  http://www.bhphotovideo.com/BNH/controller/Home?Q=&A=endecaSearch&InitialSearch=Yes&N=0&O=&NTT=film+and+slide+scanner

  Kind regards.

• can I install CS5 on my laptop if 2 people already use the creative suite? I've now been referred to as forums after talking with the customer service and technical support online

  can I install CS5 on my laptop if 2 people already use the creative suite? I've now been referred to as forums after talking with the customer service and technical support online

  I was told they are separated once and also says to check the forums?

  Yes you can.

  ~ Rohit

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• Set of characters not supported when the use of convert and join

  Take the following tables:

  --------------------------------------------------------
  --  DDL for Table TEST_ASSOCIATION
  --------------------------------------------------------
  
    CREATE TABLE "TEST_ASSOCIATION" 
     (     "PARENT_ID" VARCHAR2(20 BYTE), 
       "CHILD_ID" VARCHAR2(20 BYTE)
     ) ;
  --------------------------------------------------------
  --  DDL for Table TEST_OBJECT
  --------------------------------------------------------
  
    CREATE TABLE "TEST_OBJECT" 
     (     "ID" NUMBER, 
       "NAME" VARCHAR2(20 BYTE)
     ) ;

  Now this query works perfectly:

  select * from test_object t_o
  where convert(t_o.name, 'US7ASCII') like '%a%'

  And it does not (error ORA-01482):

  select * from test_object t_o
  where
  exists (
    select * from test_association t_a
    inner join test_object t_o2
    on t_a.parent_id = t_o2.id
    where t_o2.id = t_o.id
  )
  and convert(t_o.name, 'US7ASCII') like '%a%'

  I suspect that the inner query corrupts the CONVERT function, which makes it fail.
  
  Like all the world encountered something like that? Is it possible to fix this?

  Hello Alex,.

  Could be a variant of bug 4686909.

  First reported in 10.2.0.1 and fixed the 11.0.0.0

  Bug text:

  The following SELECT statement fails with ORA-1482:

  Select d1.dummy
  double D1
  where
  D1. In dummy (select Max (1) double D2 where d2.dummy = d1.dummy)
  and convert (d1.dummy, 'al32utf8') = 'k '.

  -L' error ORA-1482 reproduced if we use a MAX or MIN function, but not if
  other functions, for example, lower, upper, to_char, to_number serve
  -L' error ORA-1482 does not reproduce if the subquery is not a correlation
  subquery
  -L' error ORA-1482 reproduced for any destination character set used in
  the convert function

  Release notes:

  Convert function used anywhere except the selection list has been to launch error-1482

  There is a similar bug, bug 4746930, which suggests a work around:

  WORKAROUND SOLUTION:

  using CURSOR_SHARING = TRUE

  Concerning
  Peter

• I have problems with of the Subvi after the use of customized device model

  I used to start my machine personalized customized device model and I got success in the deployment until I started to do more complicated the Subvi.   I am currently trying to convert low FPGA and high ticks to the duty cycle, but for some reason when I add it to the RT VI "Data read of HW" driver, it seems to cause a downtime... ideas? Is a circuit agree? I have added a time delay but I am still having problems. It is a device online, so I'm suspicious of it hogging resources, but am not sure.

  Attached images are meant to be read like this:

  1. the case of the RT pilot ReadDataFromHW

  2. it's the Subvi calling ToDutyCycle SIMStimPWMSubVI

  3 ShiftRegister.PNG is inside the Subvi.

  As a robotician I celebrate early and often (usually by a failure or two...), but it seems that the answer was to transform fundamentally the While loop for a loop with a count of 1 and then remove the additional elements to ensure that each shift register has that one and then right click on the shift registers and convert at the Feedback node...
  I was able to deploy to VeriStand as a custom device and it runs and calculates the factor of use with no problems. WOOHOO! Where - what is celebrate button!

• How can I use a custom tool easy to machine the same LabVIEW is the basis on average DC - RMS VI

  I use a cRio 9024 and read PWM with an analog input card 9205.  It was suggested that I use the basis on average DC - RMS VI to convert the voltage of the PWM signal into an analog signal (effective value) for use in my system.  The problem is that the 9024 can use LabVIEW models (it's VxWorks). I work through the device a custom tool easy and I wonder if someone can guide me in the right direction.

  I am running Veristand 2014, cRio-9024, 6modules, and run the scan engine.  It seems that's the reason why I can't read analog voltage (starting a PWM signal) since the signal is running at 200 Hz and the Scan Engine runs at 500 Hz.   I tried to avoid making a custom device or an FPGA and found a work around using the 9401 in counter mode.  I can get the numbers that I need, that's how I'm heading at the moment.  I would like to custom device approach, but not this sprint.

• Custom hardware and the module of ARM

  Hello world

  Our company is in the early stages of designing a custom measuring device. In the past we used Microchip microcontrollers (PIC16 and 18), a simple IDE and a C compiler, but for the new generation of devices we will use microcontrollers from Luminary Micro ARM. Since we are also users of LabVIEW, the choice for the LabVIEW embedded module for ARM seems logical. I read a lot of documentation OR and watched the tutorials, but I'm still uncertain on what we may or may not do with the module. Until we buy eval kits and the module, I need to have some facts.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".
  2. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?
  3. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?
  4. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?
  5. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?
  6. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  I apologize in advance for the number of questions, it's just that the use of LabVIEW for the development of material is completely new to me

  Thanks in advance for your help.

  Paul

  Hello Paul!

  I'll try to answer your questions and I hope someone else can add more information if necessary.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".

  Answer: no, that would be a level 2 device, we now offer three level 1 devices and information on these can be found on the link you condition.

  1. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?

  Answer: you need to add yourself as described in the link you provided.

  1. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?

  Answer: is trickier, LV Module Embedded for ARM in trial mode will have some limitations (size applications, can open the development environment for a number of days and so on), but it should not have limits when it comes to other targets as described in the links that you have already provided. When it comes to the JTAG interface, I would recommend using the Keil ULINK2 USB-JTAG.

  1. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?

  Answer: I would like to make use of the Keil ULINK2 USB-JTAG Adapter for debugging and allows us to download the code on the target. In fact, it's the only way we can download code on the ARM, but we can use a serial port / TCP in addition to JTAG debugging.

  1. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?

  Answer: Yes.

  1. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  Answer: I/O could be implemented using the basic IO layer provide us as described here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7119

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7144

  I hope this helps!

• Custom converter does not not in ADF

  Hi gurus,

  I use Jdeveloper 11.1.1.7.0 (Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493) and try to create a simple custom converter to convert the string to uppercase.

  I can see out of PON show uppercase value, but the value is not rendered in the user interface.

  Steps to follow:

  1 create the converter of java class called UpperConverter

  2 register in faces-config. XML

  3 set the property of af: inputText as below

  < af:inputText value = "#{bindings." TestName.inputValue}.

  label = "#{bindings." TestName.hints.label}.

  required = "#{bindings." TestName.hints.mandatory}.

  columns = "#{bindings." TestName.hints.displayWidth}.

  maximumLength = "#{bindings." TestName.hints.precision}.

  shortDesc = "#{bindings." TestName.hints.tooltip}"id ="it1.

  immediate = "true" autoSubmit = "true" >

  < f: validator binding = "#{bindings." TestName.validator} "/ >"

  < / af:inputText >

  package xx.oracle.apps.fnd.custom.view.converters;

  to import java.util.Collection;

  import java.util.Collections;

  javax.faces.component.UIComponent import;

  Import javax.faces.context.FacesContext;

  javax.faces.convert.Converter import;

  Import org.apache.myfaces.trinidad.convert.ClientConverter;

  / public class UpperConverter implements converter, {ClientConverter}

  public UpperConverter() {}

  Super();

  }

  public String getClientLibrarySource (FacesContext facesContext) {}

  Returns a null value.

  }

  public Collection < String > getClientImportNames() {}

  Return Collections.emptySet ();

  }

  public String getClientScript (FacesContext facesContext,

  UIComponent uIComponent) {}

  Returns a null value.

  }

  public String getClientConversion (FacesContext facesContext,

  UIComponent uIComponent) {}

  Returns a null value.

  }

  public getAsObject (FacesContext facesContext Object,

  UIComponent uIComponent, String string) {}

  System.out.println ("value GetAsObject:" + string);

  If (!) (String.Equals (null)) | (chaîne == ""))) {

  System.out.println ("GetAsObject convert value:" + string.toUpperCase ());

  return string.toUpperCase ();

  }

  Returns a null value.

  }

  public String getAsString (FacesContext facesContext,

  UIComponent uIComponent object object) {}

  System.out.println ("value of GetAsString:" + object.toString ());

  Return object.toString () .toUpperCase ();

  }

  }

  
  

  Enjoy all the entries.

  
  

  Kind regards

  Ferrere
  

  Hello

  I don't see the converter applied to the inputtext. I was expecting the inputtext will be like: