Use a custom in a map icon

Similar Questions

• Use of custom in Veristand files

  Hi all

  Have not been able to find a lot of documentation related to the use of "Personal files" in Veristand.  I would like to know some examples of the types of files users have set up.  Specifically, I would like to know if you can "call" some types of models or devices personalized (i.e. for databases or configuration settings).

  Thank you very much

  GSinMN

  Hi GSinMN,

  It has custom there some documentation in the help of VeriStand, which deals specifically with files.

  Adding custom files

  http://zone.NI.com/reference/en-XX/help/372846D-01/VeriStand/add_custom_files/

  Although aid is not quite fully reveal the capabilities of this feature. There are two distinct use cases that I could identify for the custom in VeriStand files option. I'm going to the list of people the more detail and show you an example.

  Make easily accessible to the driver files in the development environment.

  When a file is added in the custom files in the project section, it will have its own icon in the project and is included in the project dependencies. Having the file to display in the project is useful if there is a picture of troubleshooting or a specific document (calibration sheet, how to run a test, etc.) that you would like as your operator to have access to. For example, in the sample project, I realized, there is an added file called "TestA1_PreTestSetup.txt". Of the project (on the toolbar), the operator has the option "Open a file" (to view) or "export...". "to investigate his path on the computer of the operator.

  

  Please note that the file is now added to the dependencies of the project.

  If you start to investigate the project file and lets say you do a right click on it and notice that there is a Properties option. You may notice that the Description of this file is empty. In fact, it can be filled by modifying the XML source of the .nivsproj. It also leads in the second case of the use of custom files.

  Transferring files to the aim of RT which can be used by the VeriStand engine.

  If you were to investigate the .nivsproj XML, you could first find the section of the custom files, then the tags of the element that you configured.

  

  Here are the relevant tags and a jump down,

  -It points to the source of the custom file. In this case, I added the file in the directory "C:\Users\Public\Documents\National Instruments\NI VeriStand 2011\Test procédures". He is able to solve the first component 'In common Doc Dir' because it's the common directory for VeriStand, and he added then the folder of the test procedures and the name of the file that I created.

  -Fill this tag gives us the opportunity to complete the description information that occurs when we right click on the file in the project.

  -Fill this tag gives you the ability to also send the file to the target deployment. Your VeriStand engine can then access this file during the operation. With respect to the types of files that you want to use, the link in the post above should help guide only.

  Please Note: change the XML of the project offers more customization and functionality of your project, but these changes should not be made whole. An incorrect change tags in the XML file can lead to results and poor execution. Then move forward with caution and only make minor changes at the same time.

  I hope this helps. Have a nice day, GSinMN

• applicationContext remains "null" after using the custom url scheme to launch the app

  Hello

  I am currently working on a DPS application for a customer who wishes to use its own authentication system.

  The client system is implemented so that they send the valid token to a URI with a custom method.

  By setting the same pattern custom in my app DPS constructor, I can get the app from the login window.

  What is described in the library of DPS & Api store 2.32 documentation, I understand that

  " adobeDPS.configurationService.applicationContext must contain several variables associated to how the viewer was started or enabled:" ","this class represents the context under which the application is launched '

  
  

  However, in my application when I try to see what contains the applicationContext, the object is always 'null '. It doesn't matter if I started the application by clicking on its icon or if it was launched using the custom uri scheme.

  
  

  Is this a bug or am I missing something here? I really need this token.
  

  Hello

  After being stuck for a while trying to work with the url of my client for usage, I finally tested it with a modified version and have found the cause of the problem.

  Work of first information provided by a colleague who was apparently not detailed enough for the customer asked me to use a url of the form App. scheme://auth/#token=...

  It turns out that this kind of url can start or bring the app to the front, but applicationContext remains empty.

  My tests using a url in the same form as you suggested (eg. app. scheme://v1/slot/library) can trigger the app or transmit data.

  The documentation available in the SDK library & shop and article on how to use a custom template is very vague on what formats link actually works, and how we can vary with it.

  A breakdown of official links to pieces, that the parties do and what items can be modified (for example ' / appstate') within the API documentation would be a great help for developers, I think.

  Kind regards

  Lorin

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• One of your filters uses a custom header that contains an invalid character.

  When I send an email, you receive the following error message:

  «One of your filters uses a custom header that contains an invalid character, such as ':', a nonprintable character, a non-ascii character or an 8-bit ascii character.» Please change the msgFilterRules.dat file, which contains your filters to remove characters not valid in your custom headers".

  It is followed by a message saying that the email was sent and saved despite the error.

  The problem occurred after the transfer to 10 Windows (from Win 7)

  I deleted all files msgFilterRules.dat and all filters, but the message persists.

  Any suggestions on what else to try?

  Thank you
  Ben

  Problem solved.

  After you delete all files/imap mail entries, the problem disappeared.

• How can I clear the browser history when you use the custom settings for history?

  When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?

  I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• Firefox guard handed himself to "never remember history" even if I say "use the custom settings for history".

  Firefox seemed to work fine until yesterday. When I used Firefox yesterday, my home page was changed to Firefox start page and did not open my tabs from the day before. I went to settings and changed the homepage back to google.com and told to "use the custom settings for history". I closed Firefox and opened it again and my homepage was google.com, as I put it, but it was back to "never remember history". I tried several times, yesterday and today, but Firefox keeps affecting himself never "remember history".

  Choose the 'use the settings customized for history' parameter is not make changes to the parameters of the history and cookies.
  
  Firefox displays the "use the custom settings for history" as an indication that at least one story and cookie settings is not the default to make you aware that the changes have been made.
  
  If all the history settings are default, custom settings are hidden and see you "conservation rules: (never) don't forget history."

  Don't remember history"means that private browsing is active and"Always use private browsing mode"Gets a check mark.

  • https://support.Mozilla.com/kb/private+browsing

• my privacy setting is stuck on do not forget history, won't stay on using the custom settings for history, after I've selected and click ok

  When I go to tools, Options, privacy and "Use the custom settings for history" of the value and then click on OK it won't save. It remains on "Remember history", even if she never will save "remember history" as I tested it. It seems if be produced after these recent last Firefox update. Anyone know why I can not choose "Use the custom settings for history", as is the parameter I want to use?

  Why aren't satisfied with the history settings by default that you currently have?

  Any changes (for example, to disable the cookies third party or form not given memory or keep cookies until you close Firefox and make an exception for the cookies you want to keep) that you will cause "use... custom parameters. "to be selected if you really want to see.

• can I set up an amplifier to lock using the PCI-7831 RIO map?

  Normal 0 21 MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: 'Times New Roman' ;} "}

  Hi all

  I use FPGA, PCI-7831R module, I can implement locking an amplifier using the PCI-7831 RIO map?

  Kind regards!

  SUN

  Hey,.

  The following link shows an example of a lock-in amplifier set implemented on a cRIO with 9233 module.

  -> http://decibel.ni.com/content/docs/DOC-1762

  Hope this helps,

  Christian

• Is it possible to use a JPEG Image as an icon of file?

  Hello;
   
  Is it possible to use an image *.jpg as an icon of file (or folder)?
  Can I copy in any of the existing *.dll files (say, SHELL32.dll) and select: properties/customize/change icon?
   
  Thank you.
  Monir

  Windows XP does not support the 256 x 256 icons.  This size was introduced in Vista.

  Try to repeat your experiment, but at step 6, using 128 x 128 (or less).

  Wikipedia article:

  Windows XP, by default, employs 48 × 48 pixel icons in Windows Explorer. Windows XP can be forced to use greater than 256 × 256 icons by modifying the Shell icon size value but this would entail all the 32 × 32 size icons throughout the hull to be migrated. Microsoft recommends only sizes of icons up to 48 × 48 pixels for Windows XP. Windows XP can read 256 × 256 pixels icons and larger images and it can resize them to use if no closer image size is available.

• Use a custom in a signal qml class

  I want to use a custom in a signal qml class, but have difficulties of implementation that correctly.

  My class is OutgoingInputs

  I give the floor

  qRegisterMetaType("OutgoingInputs");
  

  Save a pointer to it as a type of meta, which seems to be necessary, but when I also use

  Q_DECLARE_METATYPE(OutgoingInputs*)
  

  in the header file for the class, I get a compilation error.

  I have to save it without a pointer (was the idea here ) or is there another obvious error?

  Is there an example how to do this?

  I can receive the signal if my housing uses no parameters.

  I don't think you need to register as a metatype... a simple registry should do as it is the same as the use of the QML object:

  qmlRegisterType("mynamespace" 1.0, "OutgoingInputs");

  found this on the forums of qt:

  http://Qt-project.org/forums/viewthread/9657

  I hope that helps!

• Violation of page protection - error get by using the custom plugin

  https://Apex.Oracle.com/pls/Apex/f?p=63937:1:

  The app link.

  Identification information

  -TINO

  [email protected]

  -test123

  When I try to send a page using the normal text field, he's fine. But when I use my custom plugin it throws error PPV.

  You can see the plugin code in the shared components of the application.

  Application is called theme MDL.

  
  

  There also may be problems with my page template but I doubt since the ordinary questions works very well.

  
  

  I developed this on 4.2.6.
  

  Incredible.
  The problem is that the plugin was wrapped with

  As soon as I took it, it could submit its value.
  It's funny how I had no idea how fix it, but as soon as I saw you talking about form I knew what to look for.

  It would be cool to know why this happens.

  Thank you!

• How do we use a custom in AvailableRefinements view?

  HELO,

  We want to use a custom view (subset of the Base) in the component AvailableRefinements (Guided Navigation) but only the Base view appears for the selection even though other published views exist in the application.

  It is even possible to use a custom for this component view? If not, then what is the best way to achieve this?

  We have different types of data all combined into a single dataset. It may be that a single application with multiple screens and each screen should show a specific data type. There are also some common attributes. These attributes shared by guided Navigation should show only values that belong to the data type of screen. The custom view would help if guided Nav accepts one.

  Thank you

  VJ

  You can also load several Collections/sets of data in your data field.

  HTH,

  Dan

  http://branchbird.com

• I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where should you put these files?

  I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where do I put these files?

  If you're on a PC - C:\Users\ [username] \AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets