Using Photoshop CS4?
Hi guys,.
I am doing a project for school with Adobe Photoshop CS4. The plan is to cut pieces of different images and sticking them into one main image. He was going very well for the first image pieces a decade, but the last time I tried to do, something very strange happened. When I stuck a piece of an image in my main image, he is out, red and transparent. I have no idea why he did this because I didn't change anything or anything do differently. What can I do to fix this? Please help me better than you can. Thank you, guys! :)
No matter how lucky you have accidentally enabled Quick Mask mode or show only a single channel?
Mylenium
Tags: Photoshop
Similar Questions
-
Can I use Photoshop CS4 Extended disk to install it on my new computer windows 10?
What do I need to uninstall first on my old computer?
I have serial No.
old system was vista
You can install and activate, until, two computers. So yes, you can install on your new computer to win 10.
If you have already activated on two, disable (help > deactivate) on your old computer before uninstalling it on your old computer.
-
I'm using Photoshop CS4 on an iMac with OS Lepord of snow. Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine. My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @
You must click on this link 150:30 blue and start with message 11.
Don't forget to leave a space after sudo python before submitting the script.
Remember that you will not see your password when you enter it when calling to make.
-
Cannot open dng files after formatting my computer using Photoshop CS4.
I have Photoshop CS4 installed on my office and because I couldn't open my raw taken with my Sony A99 files I downloaded DNG Data Converter.After that I could open my DNGs using Photoshop CS4 files. After a few months, I formatted my computer and I reinstalled Photoshop CS4. Now I can't open my old dng files and I get an error message. Also I can not update my first version of Photoshop since version 11.0.
Mark the thread as answered...
-
Tell Acrobat 9 Pro using Photoshop CS4
I have the Creative Suite Design Premium 5 installed, for reasons that I won't go in, Photoshop CS5 is a dog on my system. It is simply unusable. All the other CS5 applications will work perfectly.
Acrobat 9 Pro wants to edit images using Photoshop CS5. I wish I could say Acrobat simply use Photoshop CS4 (since this version works in fact). Is there a pref or something somewhere that I can put?
I looked and didn't see anything.
Am I went to simply uninstall Photoshop CS5?
(Although PSCS5 is currently unusable, I hope an update somewhere of a person does that $900 no waste.)
Thank you
Preferences/editing.
J.
-
HP B9180 using Photoshop CS4 - tray for special media
Hello
I've recently updated my photoshop CS4 from CS2 software and just realized that the Photosmart Pro plugin is not compatible with CS3 and later. I am trying to print a 11 x 17 "Hahnemühle Fine Art Pearl 285 g/m² per photoshop. I think the ICC profile is in the right place, but I feel a bit lost without the photosmart pro plugin (formerly listed under file - automate..). There is no option to print using the tray for special media on the B9180 and when I try to print using the main paper tray, the paper gets stuck (ruin!), because it's too heavy.
Is it possible to choose the tray for special media when printing in photoshop (or elsewhere) OR download the plug-in compatible with CS4?
Help, please!
Thank you
Liz
Hi LIz,
I also have a B9180. You can access the tray for special media from any program, including the CS4, the HP printing dialog box, menu Type/quality paper. There is a checkbox for LAC to special brackets at the bottom of the window. check this in combination with the correct paper size and the type of installation of the Page and you should be OK.
(Although I am an employee of HP, I speak for myself and not for the HP)
-
Good so I bought Adobe Photoshop CS4 Extended on ebay and I had no idea that it was actually an upgrade for CS3 Extended, which I did not. He wants me to punch in a serial number for CS3 Extended in order to activate the CS4 Extended. I seated him on the 30 day trial, but I would rather activate and do not have to worry about how long before the trial is up. Can someone help me please?
Unfortunately, I don't think that there is much that anyone here can do for you. Do not have a number to activate previous versions to use an upgrade. No one can give you. There are a lot of people post who buy software on ebay that does not work for one reason or the other. In most cases it is hacked. The announcement on ebay said that it was an upgrade? If this isn't the case, you might be able to put in a complaint on ebay within the time limit.
-
Using Photoshop CS4 text...
I have been using Photoshop Elements for a year or two, and today, I downloaded a demo of CS4. I'm doing a text effect, but I can't find the right tools.
I already have the police and I would like to recreate the slogan which is located on the Watchmen character banners. Can someone help me (don't forget that I use for the first time CS4)? Thank you
You should be able to click on them? -I'll try to download it again
-
Any advantage of using Photoshop with Premiere Elements (instead of Photoshop CS4)?
Soon, we are about to buy a Mini-DV with Premiere Elements camera. We currently have Photoshop CS4. Question: Is there a technical advantage to buy a copy of Photoshop Elements and Premiere Elements? Are there specific tools in Photoshop Elements that would make video editing more easy than using Photoshop CS4? Thank you.
The biggest advantage to using Photoshop Elements with Premiere Elements is that you can transfer some projects — namely slideshows - from one to the other. In other words, you can start a slide show in Photoshop Elements, and then send it to Premiere Elements for the finishing and DVD release.
But, if you have CS4, I wouldn't bother with Photoshop Elements otherwise. It will feel like a toy compared to the pro version.
-
The part 'Name' to open the file in photoshop CS4 window is too short or reduced
Anyone know how to get or adjust the titles of tabs in photoshop when I open a file for that its readable?
Its really annoying when you have to open and work with hundreds of images per day, whenever I open a file, I need to expand the NAME column so that I can read what we call the file! Using Photoshop CS4 and 10.9.5
I have this problem with Photoshop and not InDesign or Illustrator.
Hi there, Geraldo.
It is a big question. For me, I don't want to hurt to see what I need for everything that contributes, I like it.
There are a lot of different ways, you can see things in the Finder that you might like, but there is also information on how to expand the 'Name' column too. The following article, well written for El Capitan still provides a basic concepts that apply to the Mavericks as well:
OS X El Capitan: ways to display items in the Finder Windows
If you are only interested to expand the column enough to know the names of files, here is what you will do.
Resizing of columns: column and Cover Flow in the list view, drag the line between column headers.
To develop a column to display the names of files in their entirety, double-click the column separator.
Let me know if you need more information.
-
AppleScript to resize images in Photoshop CS4 will not work in CS6 - help!
Hi people.
I am new to this lark script and hope someone can help...
Our Nigel, unfortunately is no longer with us, wrote a cunning to convert script photographs large size smaller using Photoshop CS4.
The workflow is the following:
You open Photoshop
You have two files, one with the original files and the other which is empty.
You drag the folder with the original files on the .app and he asks a destination folder (tell you him to use the empty folder).
The images are then opened one by one, resized, some tape removed and are then registered to the empty folder (formerly).
Lovely jubbly.
The problem is when you try to use this app with Photoshop CS6 - it fails at the point of backup files in the new folder which gives this error:
Adobe Photoshop CS6 has been an error: "unable to get document"075.jpg". (- 1728)
I fiddled with the script a little and it seems don't not like the section "with options" command 'Save document' (it works fine if I completely remove the fuse "with options" - but I need than LZW compression). I have trawled through a few similar questions on these forums, but have not been able to track down the problem. It probably doesn't help that I'm not a programmer (just try to translate as I oppose using the Photoshop CS6 AppleScript reference guide).
Did everyone there knows the problem please?
The script is below.
on Open ()pourla)
set theDestination of (choose folder with guest 'set the destination for the files processed...) ") as text
tell application "Finder"
set isContainer to fake
set theItem to agenda 1 of pourla as string
if last character of theItem is ":" then
set list of files to files of all of the content of agenda 1 of pourla
on the other
set list of files to pourla
end if
Repeat with x in list of files
set Dittos to x as texte
set theFileName to name of x as texte
set outFilePath to theDestination & theFileName
if theFileName ends by ".db" then
--
on the other
tell application "Adobe Photoshop CS6"
-I was skilled enough change the foregoing of "Adobe Photoshop CS4".
set units of the rule of parameters to units of mm
Open alias theFile
set theWidth to width of document theFileName
set theHeight to height of document theFileName
if theWidth > theHeight then
Resize image document theFileName width 65 resolution 400 resample method bicubic
on the other
Resize image document theFileName height 65 resolution 400 resample method bicubic
end if
convert document theFileName profile ' Coated FOGRA39 (ISO 12647-2: 2004) " intent perceptive with blackpoint compensation without dithering .
{ adjust layer of art 'History' of the document theFileName with curves with options { }class:curves points of the curve: {{0, 0}, {128, 128}, {243, 255}}}
{ Save document theFileName in outFilePath like TIFF adding tiny extension with options { }byte order:Mac OS embed the color profile:fake image compression:LZW} without copy
close document 1 saving no
fin say
fin if
-display outFilePath dialog box
fin Repeat
fin say
end open
file name
Try this.
game of myOptions to {class:TIFF to save options, the byte order:Mac OS, embed the color profile:false, image compression:LZW}
Save document theFileName in outFilePath as TIFF with options myOptions by adding the extension lowercase without copy
HTH.
-
Photoshop CS4 "licensing for this product has stopped working. 148: 3.
I have been using Photoshop CS4 on my PC for years without problem. The system is Vista 2007 with Service Pack 2. Now I can't run Photoshop at all. I get a message that says: a license for this product has stopped working. 148: 3 I tried to get help from Adobe Support and they sent me here for expert advice.
Hi Frugifex,
Please see the following links:
Error: "License has stopped working". Windows
Error Code 148: 3 - Photoshop CS4 for Windows
Adobe cs4 does not not because of error 148: 3
Let us know if that helps.
-
How to open Nikon D90 .nef files in Photoshop cs4 and bridge?
Hello and good day, I used Photoshop CS4 and bridge and worked on raw .nef files.
I was away from it for awhile. I'm still trying to do this but now where.
I launch Adobe bridge, point to the folder that includes files to JPEG and nef. each file that is
a .nef file had a thumbnail above it showing BR, I suppose that the bridge. If I click on one of the images that
is raw, I see the metadata but I try to open it and Photoshop CS4 is launched and shows the type of file
is not valid?
Do I seam to remember that the raw image was opened in bridge first?
Thank you
Harry Nash
Hihjnash01
- Camera raw 9.2 won't work because it is compatible with the version of PS that you use.
- You must download CR 5.7
Concerning
Rohit
-
Hi people.
So I have a boatload of pictures that I have to deal with as I'm moving off Ebay and open my own online store and the images that I have on Ebay, although excellent quality are not square, and unfortunately, the model that I use in Wordpress requires square photos.
Basically, what I need is a script that I can use in batch mode, which will focus on the size of the image and change the canvas size to be square corresponding to the current long image side. Resize the image to 1600 square pixels and finally save for web in JPEG quality 60.
Normally I would muddle my way through this trying to teach myself but I already do so much with this new project that I can't afford to pay developers for help that I would really appreciate if someone could help me with this script. I use Photoshop CS4 if it made a difference.
Thanks much for any help you can offer.
See you soon,.
J
A simple gesture can do that. What you need to do is that the action of lot. With the help of Photoshop Image Processor script. The Action is a two-step
N ° 1). File menu > automate > fit Image. In the dialog box Image Fit you assign Width and Height 1600 pixels.
Step 2.) Menu Image > canvas size. In the canvas size dialog box, you assign Width and Height 1600 Pixels.
Record the action in some action with a name like 1600PxSquare
Then use the file menu to Photoshop > Scripts > image processor. In the dialog to the Image Processor script. Select your image source folder. Set where you want your jpeg images. Set it to save jpeg files quality 6. Set it to include your 1600PxSquare action.
Step adjustment image resize your image to fit in a 1600 x 1600 pixels are while keeping image proportions of images. Portrait image will be high 1600px and landscape image will be 1600px wide. The step size canvas will add the canvas to make the place of the image. Portraits will have a border on the left and right images of landscape will be confined to the op and downs.
-
Photoshop CS4: Images of the workspace are dyed blue for unknown reason
Hello world.
The question in that I'm running does not appear very often so I thought I would go and ask away. I use Photoshop CS4 (64 bit) and when I open an image in Camera Raw, I see perfect photos as they are. By bringing the file in the workspace, however, they are immediately covered in a blue tint which makes editing VERY boring photos. I used Photoshop on this laptop for a few years and never encountered a problem like this. My screen has been calibrated using the calibration tests integrated into Windows 7. Recently, I had to reinstall my programs Adobe After buying a new internal hard drive. This means that I had a clean slate before installing Photoshop. I had to reinstall Windows itself and when buying, my laptop came with some pre-installed Dell software.If only there was a Dell program that handled my colors? Photoshop seems to be the only one affected program, and it is ONLY in the workspace in particular, it has so well there have a problem program. I am a student in a photography class, so any advice would be helpful! Thank you!
Yes, it's a question of color management. Most likely your pre-installed software used a setting or a specific color profile. Check your evidence and your system color management settings.
Mylenium
Maybe you are looking for
-
Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems. It is not possible to upda
-
Cannot turn off the prompt of password to wake up sleep monitor
So whenever my screensaver lights up and I'll be back to wake up the monitor I get the password of the user account guest. I am running Windows XP home on a dual boot Macbook Pro. I have the owner administrator account and staff use account for the
-
my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply f
-
How and where can I download and run, lack tasklist.exe?
Try to find what causes my CPU to have high CPU utilization. Someone said, I could check the CPU high usage by going to RUN and type cmd, enter, and then type tasklist/SVC. but I get an error saying, essentially, that there is no task list. So, how c
-
"This program requires a codec missing Windows"
When I try to open a file in windows media player, I get this error message. My drivers are up to date.