Validate the text in the focus on

Similar Questions

• How to force you to update to the date entry before you validate a text field?

  I have this code:

  Custom blur for txtWeekEndingDate script

  (function () {}

  var weekEnding = new Date (event.value);

  day of week var = new Array (7);

  day of week [0] = 'Sunday ';

  day of week [1] = "Monday";

  day of week [2] = "Tuesday";

  day of week [3] = "Wednesday";

  day of week [4] = "Thursday";

  day of week [5] = "Friday";

  day of week [6] = "Saturday";

  var dayOfWeek = weekday [weekEnding.getDay ()];

  var strWeekEnding = weekEnding.toLocaleDateString ();

  Do nothing if the field is empty

  If (! event.target.value) return;

  If the value is not a valid email address...

  If (dayOfWeek! = 'Sunday') {}

  .. .that the user knows that the value is not a valid end date of week...

  App.Alert ({CMSG: "you entered, '" + strWeekEnding + "". ""}) Please enter a date on Sunday. ', nIcon:3, nType:0, cTitle:this.documentFileName});

  .. .and set the focus on this field

  event.target.setFocus ();

  } / / endif dayOfWeek! = "Sunday".

  })();

  The problem is that if the user enters something like "1/1" in the input box (which has a date format defined in the properties of the text box in the "mm/dd/yyyy') it sets the variable weekEnding to"undefined ". Without the validation script, it properly changes the date "01/01/2013", but it seems that this change occurs after the execution of script OnBlur. How can I force the update occur before the script is run?

  When an entry of "1/1" gets converted to "01/01/2013", it is only for what is displayed in the field. " The value of the underlying field remains on "1/1". The point is the value of the field does not change, just what is displayed in the field. This means that there is no direct method to get the text that is displayed.

  You can add a custom script to Validate that changes a value entry of "1/1" to "01/01/2013".» Then, you would get just the value of the field to recover. If you want more help with this approach, after once again.

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• Tab behavior of the focus in the search of selected text

  In versions previous to Firefox, when I selected some text on a Web page, right click on the text for the menu popup and click on the option 'Search' (search Google for "my text selection") tab that currently has the focus would stay focused and a new tab would be launched to manage appropriate search in the background. Since I updated to Firefox 13, the new tab now receives focus when I do a search on the selected text.

  How can I switch to the old behavior? This change in functionality is driving me crazy. When you read a Web page, I often like to select words and phrases I need to learn more and search Google or Wikipedia via the context menu. I almost always like to finish reading the current page before going off to read the new tabs. Even if I did intend to stop reading the current page, and go to the new tab, there are often several seconds to ensure that the new tab to load and I prefer to keep the page being read and manually switch the new tab that watching a blank tab while I wait for it to load.

  In the "Tabs" window tab options, there is a check box for "When I open a link in a new tab, switch to it immediately." Is there something like that for the new tabs launched by a search from context menu?

  Thank you!

  Hey bob, you can enter Subject: config in the address bar of firefox, confirm notification of information (where it appears), search for the preference named browser.search.context.loadInBackground & switch true by double-clicking it. that should bring back the old behavior...

• How can I stop Windows Search to steal the focus on the text input area?

  How can I stop Windows Search to steal the focus on the text input area?

  I can type about three characters maximum and then results focus, and I have to click with the mouse to the area of searching at the end.

  For example - I want to get "Img1.bak".

  I type 'I' "m" and then I'm whisked away and the 'g', I typed just takes me to the "great songs by Imogen Heap.txt" or what is the first result starting with g.

  I have to reselect the text box and add a letter or two at a time to get what I need. Very frustrating.

  Hello

  Thanks for the display of the query to the Microsoft Community. I'll do my best to get the problem resolved, but until we start could you give us some more information?

  1. Since when are you facing questions?

  2. you have any antivirus installed on the computer program?

  3. are you aware of any recent software or hardware on the computer changes?

  You can go through the steps in the article and check if it helps. Here is another article to improve Windows searches using the index.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• How to validate the number of characters in the text entry box?

  Hello

  I have inserted a text box entry and assigned a variable (UserName). Now, I need to limit the entry of a number, maxinum of 20 characters. In other words, how can I validate the number of characters in the text entry area and provide feedback if it is more than 20 characters?

  I think that you should study the Jim Leichliter widget that allows you to use regular Expressions to validate text input.

• How to validate the Date value in the text column

  Hi all
  
  I entered DATE value in the element of text field (Char Data Type), now how do I validate, the entered date is valid or not.
  
  Thanks in advance.

  Well, the easiest would be to make the part of DATE data type.

  Another possibility is to try to convert the value to a date in the WHEN-VALIDATE-POINT-trigger, as

  DECLARE
    dt DATE;
  BEGIN
    dt:=TO_DATE(:BLOCK.ITEM);
    -- if code comes here, the date is valid
  EXCEPTION
    WHEN OTHERS THEN
      -- seems to be no valid date
      MESSAGE('Error');
      RAISE FORM_TRIGGER_FAILURE;
  END;
  

  Published by: Andreas Weiden on 19.12.2010 12:23

• Set the focus to the text box of the embedded NumericStepper control

  I have an application that requires I use NumericStepper edit control as ItemEditor of a DataGrid column.

  I have two problems that I can't seem to overcome, one being the result of the solution to another:

  (1) I need to instantiate the component NumericStepper during execution, because I don't ' know advance what columns it will require.  More important still, I need to specify default attributes (styles, min, max, width, etc.).  I can't understand how to specify these attributes other than in a .mxml file.  To handle this, I have crreated a component 'wrapper' that's an HBox with a NumericStepper inside her, and I can specify my attributes on the tag NumericStepper.

  (2) now that I did #1 above, although, when I click a DataGrid cell that uses this component editing, the editor comes back but the text box is NOT centered, which means that the user must click a second time if he wants to type a number.  It's very irritating, but I do not know how to manage the focus such as when my HBox-with-embedded-NumericStepper' control rises, it concentrates and its selected data, NumericStepper, just as the 'base' is.

  So, my questions are:

  (1) can I somehow assign property values to a standard when executing NumericStepper, so that I can avoid using my built-in custom control HBox?

  (2) how can I manage the focus so that when my control HBox is in place, the text box is selected and fucused?

  That sounds confusing, but I have a small program to demonstrate this.  The "QtyBad" column uses my own NumericStepper HBos-based and not to be put in the correct focus when activated.  The "QtyGood" column has demonstrated APPROPRIATE behavior, as exposed by the native NumericStepper component, but I can't specify additional attributes / s on this subject.

  Here are all of the program - called "DGNumStepperDemo" - here:

  DGNumStepperDemo.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"creationComplete =" onInitialize () "> "
  < mx:Script source = "DGNumStepperDemo.as" / >
  < mx:DataGrid id = "dg1" editable = "true" top = "20" left = "20" width = "350" height = "124" >
  < / mx:DataGrid >
  < / mx:Application >

  DGNumStepperDemo.as

  
  

  ActionScript file
  Import mx.collections.ArrayCollection;
  Import mx.controls.DataGrid;
  Import mx.controls.dataGridClasses.DataGridColumn;
  //---------------------------------------------------------------------------------------- -------
  [bindable]
  private var gridData:ArrayCollection = new ArrayCollection([{Qty:0},{Qty:5},{Qty:10}]);

  private function onInitialize (): void
  {
  CDL of the var: Array = new Array();
  var dgc:DataGridColumn;

  DGC = new DataGridColumn ("QtyBad");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (EditorDGNumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);
  
  DGC = new DataGridColumn ("QtyGood");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (mx.controls.NumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);

  DG1. Columns = cols;
  DG1. DataProvider = gridData;
  }

  EditorDGNumericStepper.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML ""4"verticalAlign ="middle"paddingRight ="4"paddingLeft = verticalScrollPolicy ="off"horizontalScrollPolicy ="off"> "
  < mx:Script >
  <! [CDATA]
  public function get value(): number {return itemQuantity.value ;}
  []] >
  < / mx:Script >
  < mx:NumericStepper id = "itemQuantity" value = "{data.". Qty}"minimum maximum ="0"="100"/ >
  < / mx:HBox >

  If anyone who bothers to run it, you can see what I mean about the focus problem in the QtyGood and QtyBad columns.

  Any help is appreciated!

  Quick response to the #2 is to change the EditorDGNumericStepper.mxml to the following:

  
  http://www.adobe.com/2006/mxml"
             verticalAlign="middle" paddingRight="4" paddingLeft="4"
             verticalScrollPolicy="off" horizontalScrollPolicy="off"
             creationComplete="focusManager.setFocus(itemQuantity)">
       
            
       
       
  
  

  The only thing I did was put the NumericStepper to 100% width so it fills the column like the standard NumericStepper and it looks a bit better and I added a creation complete event handler that sets the focus to the NumericStepper.  I tested it and it will be emphasis each time on it like a standard stepper.  There may be a more "preferred" way, but it's simple and effective.

  On the #1 question, you want to change the properties, styles, etc. of a NumericStepper standard once it has been added to the data grid?

• Move from one field to the other and to validate the response to the first text field automatically

  I have a problem I want to know if someone could help me with.

  I have a dynamic text box called help_txt and I have some initial instructions in order to achieve the first text field with relevant information.

  Selection.setFocus (prCv1_txt);
  Selection.setSelection (1, 0);

  The focus is already set at the beginning of the first text field, which has 2 characters maximum indicated. It is also a text entry field.

  The right answer for prCv1, which is the variable, is 01.

  If the user types 01, I want the following to happen:

  cursor automatically advances to the next text field, which is called groupNo1_txt and I want another message to display the correct information in the field of help_txt, such as the type in the next field.

  If the user does not type 01, I want the following to happen:

  cursor goes back to position 1 of the prCV1_txt text box and another message to display in the field help_txt, by mistake, please enter 01 in this area.

  Initially, I got the code to check if the user pressed the Tab key, but the error message for the 2nd text box automatically displays do not give the user the ability to type information in the second text field (groupNo1_txt).

  Can someone help me please!

  If you need me to attach a file, I can do.

  Thank you...

  Use a conditional in the onChanged function that tests first to see if the entry is at the correct number of characters...

  If (prCv1_txt.length > 1) {}

  If (prCv1_txt.text == "01") {}

  Disable prCv1_txt, select groupNo1_txt

  } else {}

  Msg error and/or reboot

  }

  }

• set the focus to the text fields named incrementally

  I created the many (hundreds) of the fields of text through actionscript. I gradually name them and place them on the stage and then subsequently access to set focus.
  I use create a textfield object:
  var txtbox:TextField = new TextField();
  
  and then use a name incremented to the text field to identify it later:
  
  var txtname:String = txtn + txtcnt; txtcnt is a number incremented variable. txtn is a string variable.
  txtBox. Name = txtname;
  
  I add an eventlistener on stage. The event listener works very well and has a companion function.
  I can identify the text field I want access once the move is running through his name.
  Then I use this .name property to set the focus:
  
  internship. Focus = "txt88";
  
  Again, "txt88" is the .name of the text field.
  
  What I am doing wrong?
  
  ypeError: Error #1034: Type coercion failed: cannot convert "txt88" in flash.display.InteractiveObject.
  to MethodInfo-(200)
  
  
  Also, I tried to use the variable incremented during this step, but get a msg of error affecting the variable this way textfield name.
  var txtname:TextField = new TextField();
  

  Awesome!
  Who did it! I appreciate your help. It is a major obstacle and I went through the help files and books without success. (If it works fine in the AS2 version!)
  Anyway, you are a lifesaver. Thank you.

• Entry text box loses focus after setting the innerHTML

  I'm trying to change my widget so that it supports the search when you type.

  But when my javascript event fires to submit ajax request entry box retains loses focus.  I tried to reset the focus after writing the html code with blackberry.focus.setFocus (), but this function sets the cursor at the beginning of the entry rather than at the end zone, so I can continue typing.

  Is it possible to update the html code in a DIV without losing the focus on my entry box, or there at - it a way to make the blackberry.focus.setFocus () to go to the end of the string currently in the box?

  Here is an example of the code that I am trying to work in my 9700 Simulator:

  ------ JS Code---function doLiveSearch(str) {  if (str.length==0) {    document.getElementById("results").innerHTML="";    return;  }   xmlhttp=new XMLHttpRequest();  xmlhttp.onreadystatechange = function() {   if (xmlhttp.readyState==4 && xmlhttp.status==200) {    document.getElementById("results").innerHTML=xmlhttp.responseText;     blackberry.focus.setFocus("search");    }  }  xmlhttp.open("GET","livesearch.php?q="+str,true);  xmlhttp.send();}
  
  ------- HTML Code-----
      
  Search:
             
  
  
  ----here's an example what my lookup code returns.----
    
      One      
    
      Two      
  

  Try with selectionStart and selectionEnd before focus:

• Text field to validate the entered text? -with the help of Acrobat Pro

  I use Adobe Acrobat Pro. I have created a form and I need to validate the same field to make sure that something has been entered, if nothing, then error message is displayed.

  I already have the format and typing Javascript writes:

  At the level of the JavaScript document

  function alpha() {}

  Definition of regular non-committed
  var re = / ^ [a-zA-Z \-s]+$/;
  
  Get all of the characters that the user has entered
  var value = AFMergeChange (event);

  
  Allow the land to be developed
  If (! value) return;

  
  If {(event.willCommit)
  
  Set the regular expression are committed
  var re = / ^ [a-zA-Z \-s]+$/;

  } else {/ / not committed}

  
  Allow only characters that match the regular expression
  Event.RC = re.test (value);
  }
  }

  Event.Value = event.value.toUpperCase ();

  Custom keystroke script

  Alpha();

  Figured it out:

  onBlur for field I entered into this:

  If (event.value =="") {}

  App.Alert ("required field: Please enter a valid name, the field cannot be empty." "");

  }

• Don't put the focus on the textbox when switching to the new tab

  Hello

  I use Firefox and I like to browse websites using it.

  But after the update to version 10.0, I am facing problem. The focus is not set to Google search textbox when I open a new tab and click on text box, I have to click another element of Task Manager and then I see the update.

  I am facing this all the days of problem and it happened after updating to this new version, only I didn't face this before.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• menu bar popup not working if the focus is on the control of the chain

  Dear all,

  I wonder if this is the behavior expected or if I'm doing something wrong:

  On a Panel, I have a control of the chain; on double click, I opened a file selection box to select a file, then the file name on this control of the chain. After this action, this string is the active control, indicated by the gray frame.

  I also have a menu with some defined keyboard shortcuts bar for example F2. It seems that F2 is not functional, long as the focus is on the control of the chain. It's embarrassing because the typical user action is selects a file and then pressing on Fx. To resolve this problem, the user should click somewhere on the Panel to move the focus to another control. Of course this could be done programmatically, but the extra effort is not to say necessary for controls ring or digital controls. Also in digital controls, I can change the numbers, but even if a digital control is the active control due to the edition of the F2 value works immediately.

  Help is appreciated.

  Thank you

  Wolfgang

  I think what is happening here is that left double click is also used to highlight the text. So when you trigger the EVENT_LEFT_DOUBLE_CLICK, you're placing the text in the control of the chain and then also accentuating. It seems to be behaving strangely when the two of them occurs at the same time because of the order of the events. You can see that the mouse around when, returning from the file select popup causes the region highlighting to drag over the text. In this highlight mode, you cannot use the shortcuts for the menu. I was able to solve this problem by swallowing the EVENT_LEFT_DOUBLE_CLICK after you set the value of the control.

• Palm Pre &amp; Exchange - impossible to validate the account settings

  I tried to get my pre sync with Exchange and make it work properly.  I got a few different error messages along the way, but now I seem to be stuck again.  Here's what I've done so far:

  1. entered my info the new account screen.  Come on an "impossible to validate the account settings" error.  I was using the following information:

  E-mail type: Exchange (EAS)

  Email address: {My Email}

  Incoming mail server: http://{ServerName}/exchange

  Domain: {DomainName}

  User name: {my domain user name}

  Password: {password}

  2A got the 1.0.2 update and the error message I tried again, same.

  3 Configuring SSL on the exchange server and tried https rather than http.  Same error message.

  4A changed username to {domainname} \ {UserName}.  SSL certificate error received.

  5. follow-up to the steps in the forums to install the root certificate.  Now make error "your username or password is not correct". I tried to enter my password several times to check that I wasn't go bad at.

  If I take the domain name on the username back to the incapable person to validate the error of account settings.  Anyone has any ideas on what could cause this problem?

  Hi avsfan273,

  First of all, you defintely should not put the domain\\user before your user name as a field dedicated for it on the meadow. Let's get out the part and focus on the error you get when it is configured in this way. Can you post the exact error message that you receive?