Validation trigger

Similar Questions

• Problem with af:inputColor and af:chooseColor validation trigger

  Background:
  I have an entry form of data that allows the user to enter data, but also allows them to choose a color. I wired the chooseColor together and inputColor components, and the user can choose a color. Everything works fine until the user decides to choose a custom color. This causes the control to launch a custom color picker dialog. When the user selects their custom color and press the OK button on the custom color dialog, the control raises an event that causes page validation. The problem is that I have a number of fields required in the entry form and that, if the user has not completed those yet, they get a nasty error message requiring an entry for all these areas.
  
  Question:
  Is there a way to stop pressure on the OK button on a custom color picker dialog to trigger the validation of the page? I tried to set the autoSubmit = "false" on the inspection and inputColor, but it does not work.
  
  Thank you
  
  Nigel

  Hello
  a fast alternative is to use an af:subform for entry and choose.
  www.Oracle.com/technetwork/Developer-Tools/ADF/learnmore/40-PPR-SubForm-169182.pdf

• Required validation trigger af:selectBooleanCheckbox

  With the help of 11.1.1.4.
  
  I have a requirement of simple validation where a checkbox allows & made a date element. MinValue required / mandatory when it is labeled off / false. The box is marked with an indicator autoSubmit = true and activation of the date. MinValue works very well when the box differs from that of on / true (default) to off / fake. However, if the user decides not to enter the date. MinValue front of re-branding of the checkbox for on / true (which should disable the date. MinValue once again), failed validation required on the date. MinValue (before the mandatory layer / model is apparently updated).
  
  The required property to date. MinValue simply throws the binding for the checkbox using ADFUtils.getBoundAttributeValue control via backing bean. The box is identified as a partialTrigger for the date. MinValue.
  
  So it seems that my problem is that I have to treat the autoSubmit / links-updated before fires PPR/validation on the date. MinValue. When the checkbox is labeled, the bomber to attribute VO is not get executed with the new value. I tried immediately = true on the box and date parameter and have also tried without the autoSubmit on the box PPR does not at all.
  
  So the question is how take us these dependent component clearances where required parameters are also involved? I don't want to have default values to respond to this scenario.
  
  Thank you

  definition immediate true is not enough
  check: http://adfpractice-fedor.blogspot.com/2012/03/update-model-in-valuechangelistener.html

• Problem with when-validate-trigger

  Hi all
  
  I work with form of oracle 10g,
  
  I developed a Form with two blocks: block Query_find and Guarantee_block (this is my main block). And query to find block has 5 fields. For example Po_number, Guarantee_number and Guarantee_type etc.
  
  Thus, in the query is block I have a button called NEW, FIND, when we enter Po_number and click SEARCH, then he gets the details of this po number and moved to Guarantee_block with all the details of the guarantee_block.
  
  So when the user click on the button again travels to the block of the warranty and the user needs to enter new data and save. SO I wrote some simple validations like that for any field. When the user enter a value guarantee no field and he tries to move it will lift a msg. Or well, if he tries to enter the existing guarantee number, it will get a message. Its works fine.
  
  But my problem is when the user to enter the po_number to block Query_find and click Find button it throws this message ("security number already exist"). I don't know how its happens I wrote this procedure inside a pkg and called only in the when validate article in this topic only. Can any pls tell me what is wrong with this code, and why this trigger activated automatically when we click on the button search.
  
  PROCEDURE C_GUARANTEE_NO (event VARCHAR2)
  IS
  number of lv_count;
  BEGIN
  IF (event = "WHEN-VALIDATE-ITEM")
  THEN
  IF: BANK_GUARANTEE_BLK. C_GUARANTEE_NO IS NULL
  THEN
  fnd_message.set_string ('enter security number');
  fnd_message. Show;
  RAISE form_trigger_failure;
  On the other
  Select count (1) in the lv_count of xxbgs_bank_guarantee_master
  where c_guarantee_number =: BANK_GUARANTEE_BLK. C_GUARANTEE_NO;
  If lv_count > 0 then
  fnd_message.set_string ("guaranteed this number already Exist");
  fnd_message. Show();
  RAISE form_trigger_failure;
  END IF;
  END IF;
  END C_GUARANTEE_NO;
  
  
  Concerning
  Srikkanth

  Hello
  Your design is very complex to me.
  Your design says, insert you data in to your BANK_GUARANTEE_BLK, so the validation trigger is activated.
  You can do another way using the lov.

  Hoping to understand...

  Published by: HamidHelal on January 25, 2012 22:44

• invalid trigger

  Hi all
  
  I try to debug this trigger and impossible to find what is wrong with it, in addition to the error line: 2
  PLS-00201: identifier 'DBMS_ALERT' must be declared... but here is the situation... we just copied on this database to a new server... and it's a valid trigger... we are on 10.2.0.3 two servers... it was moved above the Sun in AIX... that I do not understand is why is the invalid and valid in a Server trigger by another?
  
  I read an dbms_alert packagae lil... He said the dbms_alert package is created by running the catproc.sql file and is owned by SYS. so I have to run that or get it going or?
  http://www.oracleutilities.com/packages/DBMS_Alert.html
  
  How can I make this valid trigger?
  
  CREATE OR REPLACE TRIGGER CLP_RSLT_EVLTN_CRTRS_T1
  AFTER
  INSERT
  ON CLP_RSLT_EVLTN_CRTRS REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  Start
  DBMS_Alert.signal(:New.) INSTRMNT_TYP_NM, NULL);
  end;
  /

  S2k wrote:
  Hi all

  .. .we just copied on this database to a new server...

  Would be helpful if you told us how you copied.

  Anyway, either
  DBMS_Alert are (in the SYS schema) and you do not have EXECUTE privilege.
  or,
  There is no DBMS_Alert and you will need to create it (unlikely however, because I think as it gets created by catproc.sql in $OH/rdbms/admin and you have probably installed).

  So connect as SYS and:
  Grant execute on dbms_alert to ;

• The block, by removing the block, by asking questions of compensation block

  Hello

  The current design of the shape is as below (without changes to the formatting and design)

  (1) has a P - database no block parent heading

  (2) has a child block C - block of data with a single table T

  In essence, the data is stored in a single table

  How to achieve the following

  (1) clear the block (both P and C) If you erase the block P

  (2) by deleting the records to both P and C, if the deletion of the record in P

  (3) by deleting records in C

  (4) ask Parent P (F11 and F11 control) reviews and pulling on the files in C (Ctrl + F11)

  Concerning

  S

  Hello

  Pls use for their feature the following...

  1. you can use WHEN - BUTTON - PRESSED to erase the two Trigger block using Clear_form;

  2 & 3 - oracle database to create relationship master-detail between tables using foreign keys and cascading deletes using the FOREIGN KEY constraint with the ON DELETE CASCADE clause. Oracle/PLSQL: delete foreign keys with cascade

  However, Oracle Forms manage thing delete cascade internally when you define the relationship properties. I recommend the creation of another table master P with the relationship specified in table C.

  U GOLD create a relationship out of shape between the two blocs.

  If not, try to use-DELETE or KEY of VALIDATION Trigger at the level of the form, FOR INSTANCE:

  Note: do not to consider deleting the master, since non-base of data block DELETE is used ONLY in db transaction deleting.

  So you can set their NULL values as

  :P_block.dept_id :=NULL;

  or you can use CLEAR_ITEM;

  CLEAR_ITEM('P_block.dept_id');

  Syntax

  REMOVE the TABLE Table_Name

  WHERE search_condition;

  Example of

  IF: P_block.dept_id is NOT NULL, THEN

  DELETE T

  WHERE t.dept_id =: p_block.dept_id;

  4-to resolve this point

  PLS, set the property default_where of the data block C for example

  dept_id =: p_block.dept_id;

  Therefore, to create a TIME-NEWS-BLOCK-INSTANCE Trigger on C block diagram

  Write the following text

  GO_BLOCK('C');

  EXECUTE_QUERY;

  Amatu Allah.

• Make a mandatory item based on another article

  Hi all
  
  I'm having a problem while doing a required field in a table. I use following code when validating trigger:
  
  If: XXONT_ABC.ORG IS NOT NULL THEN
  set_item_property('XXONT_ABC.) WASHING "(, EXIGE, PROPERTY_TRUE);"
  end if;
  
  This code makes the other XXONT_ABC field. WASH required but when I move down to 2nd row, yet it is mandatory for 2nd place while I'm not entered any value in XXONT_ABC.ORG.
  
  Please suggest.
  
  Thank you.
  
  Published by: Amit1cs on May 16, 2013 15:22

  Hello

  did you try with set_item_instance_property. Try this.

  Concerning
  Sri

• POST-FORM_COMMIT vs POST-BASE-COMMIT

  What is the difference between POST-FORM_COMMIT and POST-BASE-COMMIT? TX

  Indra budiantho wrote:
  What is the difference between POST-FORM_COMMIT and POST-BASE-COMMIT? TX

  Form after validation fires once during the process of transactions post and commit, after validation of the database. The post-formulaires - commit trigger after inserts, updates and deletions have been posted on the database, but before that the transactions have been completed in issuing the command. The post-base-validation trigger is activated after questions forms oracle validation of completed transactions.

  Hope this helps

  Hamid

  Mark correct/good to help others to get the right answers. *

• How to go from sysdate as the initial value for reports?

  Hi, I am using Oracle 10 G reports. I would like to know how to pass sysdate as initial value for the property of a date in the parameter element user. Help, please. Thank you

  arms777 wrote:
  I want to say is, if you select range of property for the specific parameter, there is a property for the initial value (type of data, width, mask entry, initial value, Validation trigger, list of values, etc.). Does this mean that I can just put sysdate on the initial value of the parameter property? I really need to use a trigger for this? In forms, I don't have to create a trigger to do this, simply put sysdate on the initial value of the item property. I hope you understand what I mean. Thanks again.

  I can't find another way...

  This from Reports FAQ
  How to set the initial values of the parameters to the form of the parameter at run time? +

  This is what is mainly used for BeforeForm relaxation. Even if you used a select statement to create a search list for the parameter, this statement is completely parsed before the form parameter is opened. Simply assign the parameter to a value in the trigger BeforeForm will choose this option as a default value displayed to the user. For example, suppose you have a parameter called p_input_date that is intended to contain a date of the invoice. The following example will select the date of the most recent invoice being the default and notes that it correctly handle exceptions to ensure that the report does not arbitrarily die if this default setting fails. Also note that, as all the triggers of report, it should return a true or false value.

  function BeforePForm return boolean is
  begin
  select max(bill_period_end_date + 1)
    into :p_input_date
    from billing_period
   where bill_period_end_date <= (select trunc(sysdate)
                                    from dual);
    return (TRUE);
  exception
    when others then
       :p_input_date := null;
       return true;
  end;
  

  If someone useful or appropriate, please mark accordingly.

• Raise FORM_TRIGGER_FAILURE don't work well.

  Dear all,
  
  I am facing a problem that I do not understand.
  I have a screen that contains two fields: field1 and Field2.
  The control that I had to add: is to avoid save duplicate records and also do not save a record, if one of these fields is empty.
  
  I wrote KEY_COMMIT relaxation, where I did:
  Line: -.
  declare
  x number;
  RET number;
  Start
  If ((: Field1 is null) and (: Field2 is null)) then
  RET: = msgbox ("If you please choos a Field1 and Field2");
  RAISE FORM_TRIGGER_FAILURE;
  ElseIf ((: Field1 is null) or (: Field2 is null)) then
  RET: = msgbox ("Please enter Field1 and Field2");
  RAISE FORM_TRIGGER_FAILURE;
  on the other
  Start
  Select count (*) in x from TABLE1 where xxxxxxxx =: field1;
  exception when others then
  x: = 0;
  end;
  If x > 0 then
  RET: is msgbox ("already registered Field1");.
  : Field2: = ";
  RAISE FORM_TRIGGER_FAILURE;
  on the other
  commit;
  end if;
  end if;
  end if;
  end;
  Line: -.
  
  The problem is when I click on the EXIT button, I get this message: "do you want to save any changes, did you?
  If I click YES = > I find in table you TABLE1, also records with one of the above fields are saved.
  
  How is it?
  
  AFAIK, FORM_TRIGGER_FAILURE lift must stop the trigger, then no commit. It is not the case!
  
  Can someone help me in that? I had written the wrong trigger?
  
  Thanks a lot for your help.
  
  
  
  Imad QANDOUCI

  you wrote a KEY of VALIDATION trigger. But, you press the EXIT BUTTON. Why the KEY of VALIDATION trigger should fire on KEY-RELEASE?

  Put your checks to INSERT the pre and pre UPDATE triggers (both!). Better, to avoid duplication of code by writing a procedure including audits and coll the procedure on triggers.

• Several blocks of the same canvas and window update

  Hi all
  
  I want to update several blocks from the same canvas and the window. I also want to find an alert before saving the data. Based on the current record, I want to update only
  data in the record.
  
  Can you help me anyone in this regard.
  
  Arif

  You must write the validation key trigger to the block level

  I don't think so. As it is not possible to hire only a single block, what would be the use of a KEY VALIDATION trigger at the level of the block? The only effect would be that the shape has according to different where the cursor is positioned.

  If you want the dynamic Blockname (and all blocks of share the same fields that you are filling), you can do something like

  if show_alert('ALERT_TO_VERIFY')=alert_button1 then
    COPY('3', :SYSTEM.TRIGGER_BLOCK || '.REC_STATUS');
    COPY('P', :SYSTEM.TRIGGER_BLOCK || '.TASK_STATUS');
    COPY('P', :SYSTEM.TRIGGER_BLOCK || '.PERMISSION_UPDATED');
    commit_form;
    execute_query;
  end if;
  

  BTW... Why is - that update you the block after commit?

• Population Event.Value delay

  I have a few forms requiring barcodes for analysis.  In order to generate these bar codes, I create a text field using a 3sur9 font, set it read-only and the value of script:

  event.value = "*" + this.getField ("FIELDNAME") .value + "" * ";"

  Normally, it goes off without a hitch, but I'm having a problem with the way this FIELDNAME value where FIELDNAME is a scripted value.  For example, in one situation, FIELDNAME is a locked with a value by script text field:

  var A = this.getField("PART1").value;
  var B = this.getField("PART2").value;
  var C = this.getField("PART3").value;

  var strPart1 = String (A);
  var strPart2 = String (B);
  var strPart3 = A < 2? "0" + string (C): String (C); "
  var fullname = (strPart1 + strPart2 + strPart3);
  Event.Value = fullname;

  This is done because "PART1" is a mapped data field of 7 digits, "PART2" is a mapped data field of 2 digits and "Sect3" is a mapped 2-digit data field that often starts with a 0.  They must be concatenated to the bar code be correct, but there is no data for a fully concatenated value map.  The Field_Name field performs very well, but the barcode only outputs «*»  As soon as any other field in the form is filled manually, the bar code change to the appropriate "* FIELDNAME."

  I have no validation trigger anywhere in the form, but this seems to be an event validation that went wrong.

  Any ideas?

  Thanks in advance,

  A.

  I forgot to add, the problem is probably that the field calculation order is incorrect. To define it, go to the forms editing mode and

  then select "forms > edit > set field calculation order of fields.

• Key to commit pulling when the user exists in form

  I have a form where a user makes a change to a record and then try to exit the form without saving changes. Oracle Forms prompt "notice has been changed. Do you want to continue without saving changes? "The user can select 'Yes' or 'Cancel '. In my case, the user is clicking on 'yes '. Oracle Forms then invites "do you want to save the changes you made? And the user is inadvertanly by clicking 'Yes' instead of 'no '.
  
  The problem is that when the user selects 'Yes' the data is saved, but my key commit the trigger does not fire and the bad or incomplete data is saved in the form.
  
  How can I get my code key trigger to commit to the fire in this situation? Or how can I avoid the user given these guests by Oracle Forms?
  
  Any help would be greatly appreciated.

  Update pre and pre insertion means I can't use these built-ins?

  N °

  I really need to be able to move the cursor.

  In most cases there is really no need it. You can accumulation validation example using calculated items. Or (my favorite validation trigger), use the POST FORMS VALIDATION trigger. Using this trigger, all data has been applied to the database and can be verified by simple selection, making a RAISE FORM_TRIGGER_FAILURE will be restore everything.

• Anonymous - SELECT user FROM DUAL;

  I am filling a field in table LAST_UPDATED_BY VARCHAR (15) a form of APEX, with the following valid trigger:
  
  CREATE OR REPLACE the TRIGGER 'bi_EMPLOYEES '.
  BEFORE INSERT ON employee
  FOR EACH LINE
  BEGIN
  SELECT USER
  IN: new.last_update_by
  FROM DUAL;
  END;
  /
  
  The field is filled in with the value: ANONYMOUS after clicking on the button changes to. Can someone tell me why?

  ANONYMOUS is the real database user...

  Try:
  : new.last_update_by: = NVL (v ('APP_USER'), USER);

  Therefore not select necessary...

• values not loaded in bulk after insertion

  I am inserting data in a form in the table. After insertion, I have the problem, that the new data does not appear in the data block, the fields remain empty. I have to F7/F8 to get the new data loaded.
  As I do the insertion in a trigger insert post (from another field) I can't do a go_block or something similar to load new data. Can anyone help, how can I make the visible data after insertion?

  So you have to go to another record and query it. For this the trigger POST-INSERT is evil.
  Possible solution:
  -Create a KEY VALIDATION trigger, do something like the following in it:

  IF :SYSTEM.FORM_STATUS='CHANGED' THEN
    COMMIT_FORM;
    IF :SYSTEM.FORM_STATUS='QUERY' THEN
      GO_BLOCK('THE_BLOCK_TO_REQUERY');
      EXECUTE_QUERY;
    END IF;
  END IF;