Value of a textfield should enter into an another textfield without using the TAB

Similar Questions

• I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  It is possible that you downloaded the demo of creative cloud of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, it doesn't bother your catalog, preferences and personal files.

  Download the appropriate version from the link below and install them, your license key is accepted and everything will be fine.

  Updates

• How to swap two values without using the third variable using the procedure

  How to exchange the two values without using the third variable using the procedure?
  
  In a procedure using two mode we pass two values A = x and B = y, and let us pass parameters to receive the output has A = y and B = x without using the third variable
  
  Published by: Millar on August 19, 2012 11:23

  Your question doesn't seem wise. As written, there is no reason to a third variable, just

  CREATE OR REPLACE PROCEDURE(
    x IN number,
    y IN number,
    a OUT number,
    b OUT number
  )
  AS
  BEGIN
    a := y;
    b := x;
  END;
  

  If it's an interview question, I suspect that the intention was that you had two settings IN OUT and you wanted to swap the values without the help of a third variable.

  Justin

• Load data from an intermediate table into a real table by using the value of the indicator

  I need a code quick and dirty pl/sql to read the intermediate table ' STG_TABLE, line by line and load data into a PROD_TABLE.» The load should fail altogether, is a restoration should occur when he there an error occurs during registration to insert into a table of production using a flag value of Y as outcome and N as a failure.
  Any suggestions?

  Hello

  It seems that if you want something like:

  BEGIN
      :ok_flag := 'N';
      INSERT INTO  prod_table (col1, col2, ...)
       SELECT               col1, col2, ...
       FROM     stg_table;
      :ok_flag := 'Y';
  END;
  

  RESTORATION is done automatically in case of error.

  Instead of a link to ok_flag variable, you can use another type of variable that is defined outside the scope of this PL/SQL code.

  Published by: Frank Kulash, June 5, 2012 22:47

• Change the value of the array element without using the keyboard

  I have a control array on my front, say 1 d, 10 items.

  In addition, the front panel should be used with a touch screen, so I have a Subvi keyboard that should be called when I choose one of the elements of the array.  Therefore, no keyboard entry is allowed.

  My question is, how can I determine which element that the user hit/clicked?... .and how to change this value?

  -Mike

  Gents nevermind, found a way to emphasise that if this is the best way, but I got it.

  In my structure of the event, I have an event looking for the mouse event down in regards to the control array.  This event triggers my screen touch keyboard Subvi to fire, and the closure of the Subvi I pass its value to the ArrElem.Value property to assign the table a hit/clicked item.  Works.

  -Mike

• DVM loopup, without using the value to hardcode in playoffs

  Hi gurus,
  
  I use dvm in xslt. My code works fine when I use the value of hardcorded in search of dvm as qualifier. but my requirement is whatever number arrives in payload, it should act as a qualifier. Here I am using following code, compile and run, but every time I get the same output "NOTFOUND".
  
  
  Could you please solve this problem...
  
  
  < name of xsl: variable = "InterchangeSenderNumber."
  Select = "normalize-space(/ns0:Transaction-850/ns0:Internal-Properties/ns0:Data-Structure/ns0:Lookup[@Name ="InterchangeSenderID"])" / >
  < name of xsl: variable = "InterchangeReceiverNumber."
  Select = "normalize-space(/ns0:Transaction-850/ns0:Internal-Properties/ns0:Data-Structure/ns0:Lookup[@Name ="InterchangeReceiverID"])" / >
  
  
  <xsl:value-of select='dvm:lookupValue("EDIOrderFDM.dvm","Ordertype",/ns0:Transaction-850/ns0:Segment-BEG/ns0:Element-92,"SoldtoCustid","NOTFOUND","SenderID","$InterchangeSenderNumber","ReceiverID","$InterchangeReceiverNumber")'/>
  
  
  Concerning
  Francis

  Hi Francis,.

  Francis wrote:
  

  The variables are cited... use $InterchangeSenderNumber instead of "$InterchangeSenderNumber"...

  See you soon,.
  Vlad

• By the way the item values without using the URL for it

  Hello

  I want the value of an element to another page.

  Is there a good tutorials on it? I don't want to use the URL for it, if you understand what I mean.

  Also I would like to learn more about session state in the apex and how it works and how I could display a value of an element stored in the session state. So if you have some good reads on that I would appreciate it.

  d6752e93-BC8D-48f1-b3ef-073ab316b748 wrote:

  Update your profile with a readable handle.

  Also, how do I acsess an element that was previously presented on a page.

  A value of element are accessible anywhere in the APEX using the syntax of reference described in the documentation appropriate session state. The required syntax depends on where the item is referenced. In general, use bind value [: MY_ITEM] syntax in queries SQL for APEX and PL/SQL expressions and blocks; the functions V and NV [V ('MY_ITEM')] in stored program units; and the substitutions of static text [& MY_ITEM.] in the properties of code, templates and HTML component. The actual value returned will depend on where the item is referenced in the APEX show/accept treatment.

  For example that I want to fill a text field empty with a value of an element that has been filled with front page.

  What do you mean by "an element that was filled in front page? Before what? By the presentation of previous page? On the same page layout or a different page?

  Please try to make your questions more clear: How to ask questions

• What should I do to be able to use the Kodak filters with PSE V13?

  With PSE Version 10 (and PSE Versions older than V10), I have to be able to use the Kodak filters (e.g. the Kodak 'Digital Roc Professional V2.1.0,' the KODAK "Digital GEM Professional V2.1.0",...), I had to (one time) the following when you run PES Editor:

  • Preferences-> Plug-Ins
  • Check the box "Plug-in additional files" and then "select" files C\Program (X 86) \Kodak folder that contains the files with the Kodak flters
    
    

  Once I did that (after stopping and restarting of the PES editor), I could use the KODAK filters with full Editor from PSE via the Menu-> filters.

  With PSE V13, it does not. In the V13 PES Editor, Menu-> filters don't show me any KODAK filter.

  Because the V13 PES editor not showing me filters KODAK via the Menu-> filters: I tried the following: I copied the folder that contains the KODAK filters in the V13 PES editor plug-in folder. It worked too much

  I'd appreciate your help / feedback, because I need KODAK filters for retouching of tousands of scanned old slides (among others for the removal of color in all cases casts where using the PES editor alone is not enough to eliminate the strong color casts in old slides)

  Thanks in advance

  You use windows? Remember that PSE 13 is 64-bit, unless you have a 32-bit system (indicating the path of file in your post is not the case) and plugins should be as well. Many existing plugins will not work unless there is a updated version. If these are the image enhancement plug-ins, note the tecniques:

  V

  2.1: Compatible with WINDOWS 7, XP and Vista for ADOBE PHOTOSHOP CS5/CS6 (32-bit ONLY) and CS5 MAC/INTEL (32-bit ONLY).

• find the second value of the largset without using the command by

  Hello world
  
  can tell me, if we can find the second maximum value for a column without using
  order by clause.
  
  Bye and thanks.

  Hello

  Please see this.

  SQL > select * from emp where sal<(select max(sal)="" from="">

  EMPNO, ENAME, JOB HIREDATE DEPTNO COMM SAL MGR
  ---------- ---------- --------- ---------- --------- ---------- ---------- ----------
  7369 SMITH COMMITTED 7902 17 DECEMBER 20 800 80
  7499 ALLEN 7698 1600 20 FEBRUARY SALESMAN 81 300 30
  7521 WARD 7698 1250 22 FEBRUARY SALESMAN 81 500 30
  7566 JONES MANAGER 7839 2975 2 APRIL 81 20
  7654 MARTIN 7698 28 - SEP - 81 1250 1400 30 SALESMAN
  7698 BLAKE MANAGER 7839 2850 MAY 1, 81 30
  7782 CLARK MANAGER 7839 2450 JUNE 9 81 10
  7788 SCOTT ANALYST 7566 3000 APRIL 19, 87 20
  7844 TURNER 7698 08 - SEP - 81 1500 0 30 SALESMAN
  7876 ADAMS 7788 1100 23 MAY CLERK 87 20
  7900 7698 DECEMBER 3, CLERK JAMES 81 950 30

  EMPNO, ENAME, JOB HIREDATE DEPTNO COMM SAL MGR
  ---------- ---------- --------- ---------- --------- ---------- ---------- ----------
  7902 7566 3000 3 DECEMBER ANALYST FORD 81 20
  7934 MILLER COMMITTED JANUARY 7782 1300 23 82 10
  1-1-10

  14 selected lines.

  SQL > select max (sal) from emp where sal<(select max(sal)="" from="">

  MAX (SAL)
  ----------
  3000

  Concerning

• Separate values for the pre-treatment and results of the comprehensive review (without using the PL/SQL)

  Hi people,
  This year was difficult because it does not clearly justify what I want to achieve. The main reason for me to try this approach is to reduce the time of the performance. I have my program works very well, but since it accesses a view for each student, slows down the performance.
  
  Purpose of this report: Show all Dates of examination for students, but only to display the results pre and review of the overall assessment on the first line for students.
  
  Table scripts and INSERT statements:

  create table STUDENT_TB(student_id varchar2(4), last_name varchar2(20), first_name varchar2(20), evaluation_date date);
  create table EXAM_TB(student_id varchar2(4), exam_date date, result number);
  create table EVALUATION_TB(student_id varchar2(4), eval_flag varchar2(1), sampling_date date);
  
  insert into STUDENT_TB values('1001', 'Poppins', 'Mary', to_date('27-SEP-2012', 'DD-MON-YYYY'));
   
  insert into EXAM_TB values('1001', to_date('20-APR-2011', 'DD-MON-YYYY'), 30);
  insert into EXAM_TB values('1001', to_date('20-MAY-2012', 'DD-MON-YYYY'), 39);
  insert into EXAM_TB values('1001', to_date('10-JUL-2012', 'DD-MON-YYYY'), 34);
  insert into EXAM_TB values('1001', to_date('10-SEP-2012', 'DD-MON-YYYY'), 39);
  insert into EXAM_TB values('1001', to_date('01-DEC-2012', 'DD-MON-YYYY'), 82);
   
  insert into evaluation_tb values('1001', null, to_date('22-APR-2011', 'DD-MON-YYYY'));
  insert into evaluation_tb values('1001', 'N', to_date('20-JUL-2012', 'DD-MON-YYYY'));
  insert into EVALUATION_TB values('1001', 'Y', to_date('10-DEC-2012', 'DD-MON-YYYY'));

  Desired output:

  SID     Last Name   First Name   Evaluation Date    Exam Date   Results   Order   Pre Evaluation   Overall Evaluation   Accept?
  ===============================================================================================================================
  1001     Poppins         Mary      27-SEP-12         20-APR-11     30       1           N                       Y            Y
  1001     Poppins         Mary      27-SEP-12         20-MAY-12     39       2
  1001     Poppins         Mary      27-SEP-12         10-JUL-12     34       3
  1001     Poppins         Mary      27-SEP-12         10-SEP-12     39       4
  1001     Poppins         Mary      27-SEP-12         01-DEC-12     82       5

  Business rules:
  The Pre, global assessment and accept it? fields are derived. The area of the pre assessment is derived from the EVALUATION_TBtable. Its the value of eval_flag where sampling_date < = evaluation_date.
  In our example, the pre assessment should be an "n" while the overall assessment must be a 'Y '. The priority is Y-> N-> Null. The Accept flag is set to a 'Y' If a meadow at overall results past of N to Y or a NULL of Y value.
  
  I have to return all the lines for the student that show the results of the reviews SQL is the following:
  I need to join the view EVALUATION_TB. Simply join them of course would be a resulting vector product in 15 files that I don't want. I tried online (subqueries) but I failed again. Any help would be great!
  I created the column ord_num to maybe help using only this folder to display the results of the assessment.

  select x.student_id, x.last_name, x.first_name, x.evaluation_date,
         m.exam_date, m.result,
         dense_rank() over (partition by x.student_id order by m.exam_date) ord_num
  from
  (
    select  s.student_id, s.last_name, s.first_name, s.evaluation_date
    from    student_tb s
  ) x, exam_tb m
  where x.student_id = m.student_id (+);
  
  SID     Last Name   First Name   Evaluation Date    Exam Date   Results   Order
  ===============================================================================
  
  1001     Poppins     Mary     27-SEP-12     20-APR-11     30     1
  1001     Poppins     Mary     27-SEP-12     20-MAY-12     39     2
  1001     Poppins     Mary     27-SEP-12     10-JUL-12     34     3
  1001     Poppins     Mary     27-SEP-12     10-SEP-12     39     4
  1001     Poppins     Mary     27-SEP-12     01-DEC-12     82     5

  Thank you!
  
  Published by: Roxyrollers on March 14, 2013 11:37
  
  Published by: Roxyrollers on March 14, 2013 11:38
  
  Published by: Roxyrollers on March 14, 2013 12:27
  
  Published by: Roxyrollers on March 15, 2013 13:43

  Hi Roxyrollers,

  Please check your insert statements before posting. They have syntax errors.

  The following query is to give you the desired result:

  with pre_eval as
  (
     select e.student_id
          , max(e.eval_flag) keep(dense_rank last order by e.sampling_date) eval_flag
       from evaluation_tb e join student_tb s
            on e.student_id=s.student_id
               and e.sampling_date <= s.evaluation_date
     group by e.student_id
  )
  ,all_eval as
  (
     select e.student_id
          , max(e.eval_flag) keep(dense_rank last order by e.sampling_date) eval_flag
       from evaluation_tb e join student_tb s
            on e.student_id=s.student_id
     group by e.student_id
  )
  , data_with_rank AS
  (
     select s.student_id, s.last_name, s.first_name, s.evaluation_date
          , m.exam_date, m.result
          , dense_rank() over (partition by s.student_id order by m.exam_date) ord_num
       from student_tb s
            left outer join exam_tb m
            on (s.student_id = m.student_id)
  )
  select s.student_id, s.last_name, s.first_name, s.evaluation_date
       , s.exam_date, s.result
       , e.eval_flag as pre_eval
       , a.eval_flag as overall_eval
       , case when a.eval_flag='Y' and e.eval_flag!='Y' then 'Y' end accept
    from data_with_rank s
         left outer join pre_eval e
            on (s.student_id = e.student_id and s.ord_num=1)
         left outer join all_eval a
            on (s.student_id = a.student_id and s.ord_num=1)
  order by s.student_id, s.exam_date;
  
  STUDENT_ID LAST_NAME            FIRST_NAME           EVALUATION_DATE EXAM_DATE     RESULT PRE_EVAL OVERALL_EVAL ACCEPT
  ---------- -------------------- -------------------- --------------- --------- ---------- -------- ------------ ------
  1001       Poppins              Mary                 27-SEP-12       20-APR-11         30 N        Y            Y
  1001       Poppins              Mary                 27-SEP-12       20-MAY-12         39
  1001       Poppins              Mary                 27-SEP-12       10-JUL-12         34
  1001       Poppins              Mary                 27-SEP-12       10-SEP-12         39
  1001       Poppins              Mary                 27-SEP-12       01-DEC-12         82                                                                          
  

  However, is not clear to me why the assessment are related only to the first line in the query.
  The evaluation_tb table is in fact related to student_id and I expect to be connected all lines.

  I've actually linked subqueries pre_eval and all_eval only in line with rank = 1 but I don't understand if that's correct according to business requirements.

  Kind regards.
  Al

  Published by: Alberto Faenza on 14 March 2013 20:29
  ORDER BY added, deleted ord_num output

• How to enter data on another web page using Java

  I'm just tarting out in Java, so I apologize if this question sounds stupid.
  
  I want to get entry (i.e. of MSFT stock symbol) to a web page (www.dividendinvester.com) with the help of a Java program. Is this possible and if so can provide you an example with me, tell me where I need research or the best expression of how a search for this type of problem. After a Google search for a few days, I have yet to find an example of this fact.
  
  Thank you!

  Hi, I assume you want to write a robot. This means you want to simulate the user enter data and submit the forms on a web page.
  It's simple, apache HttpComponents is a fantastic tool that allows you to authenticate, store and use of cookies, display data, or download them and the process of web resources.
  Download firefox and add addon Firebug.
  Visit the Web page you want to publish data on this subject, trace web applications page sends when you click on the "submit" button.
  Then, you can simulate these actions with your java program.
  Here you can see some examples:
  http://HC.Apache.org/HttpComponents-client-GA/examples.html

• the value 600 d/T3i for firing the shot with a wireless remote control without using the timer involved?

  A 600 d/T3i is adjustable to shoot with a remote wireless without the timer is involved? I was not able to find a way yet.

  Yes. Your remote control has a switch on the bottom it is shoot immediately, or with a 2 second delay sets. I guess that yours will be set to position 2. It must be set to 0. Problem solved. Best regards, col.

• Insert data into the table without using the insert or select the command

  Hello
  
  Is there anyway to insert data from one table to another table, without using insert, and then select the command in the same pattern.
  Note: the two tables have the same structure.

  ALTER table... Swap partition...

• Insert some values into multiple tables. One of the tables has a complex primary key.

  Hello, I am using Jdeveloper version 11.1.2.3.0

  I have a FORM_TYPE table and another table Str. The table of Str is used to translate the strings from the name of the table which are read from another program from the database and used to generate forms...

  The FORM_TYPE table has a relationship with the table of STR via formtype.title_str_id = str.str_id.

  STR. table has a primary key which is based on the mf_language and str_id. columns I generated the entity for the table of STR, but impossible to insert new values of add-on application for some reason any... It is said that recording invalidates its own entity...

  I am trying to create a table that will be editable and will have the column Description, name, cdes in English, Str in French etc...

  To create a Form_Type and at the same time insert new values for each language. But can not do the inserts of the new work of STR...

  Also the FormType.TITLE_STR_ID already has a lot of null values in the database.

  SELECT FormType.DESCRIPTION,

  FormType.FORM_TYPE_ID,

  FormType.NAME,

  FormType.PAPER_REPORT_FORMAT,

  FormType.PAPER_REPORT_NAME,

  FormType.TITLE_STR_ID,

  in. En_str str,

  in. STR_ID,

  en.object_name en_object_name,

  Fr. Str,

  Fr. STR_ID,

  Fr.object_name,

  of the. Str,

  of the. STR_ID,

  du.object_name,

  BG.Str,

  BG. STR_ID,

  BG.object_name

  OF FORM_TYPE FormType.

  (select str.str_id, str.mf_language_id, str.str, str.object_name

  of mf_language ml, str

  where ml.mf_language_id = str.mf_language_id

  and ml.code = 'fr') en

  (select str.str_id, str.str, str.object_name

  of mf_language ml, str

  where ml.mf_language_id = str.mf_language_id

  and ml.code = 'fr') en,.

  (select str.str_id, str.str, str.object_name

  of mf_language ml, str

  where ml.mf_language_id = str.mf_language_id

  and ml.code = 'from'),

  (select str.str_id, str.str, str.object_name

  of mf_language ml, str

  where ml.mf_language_id = str.mf_language_id

  and ml.code = 'bg') bg

  WHERE

  FormType.title_str_id = en.str_id and

  FormType.title_str_id = fr.str_id and

  FormType.title_str_id = du.str_id and

  FormType.title_str_id = bg.str_id

  Each table that you want to update must have its own entity object. You need to connect it to an another VO/OS using the associations/view links

• Cannot create a new folder using the link on command bar (Win 7) over problem of saving files newly downloaded into the folder of choice

  Greetings! And thanks for your visit. I was not a happy camper since my toys have acted toward the top. And eating too much of my time, with too few results. Here we go:

  • I'm unable to create a new folder or get No response after clicking on "new folder" on the command bar in Windows 7 (Professional).

  Nothing happening... not even an error message.  I can enter the existing folders (where individual files) but as I'm trying to create a new folder to put them in, I write off. But that's not all. There is another mystery plaguing my system (and I suspect that these two are related).  I am naïve about how to remedy the situation:

  • I can not save files to my desktop (x) - favorite mainly files I just downloaded and am trying to save;

  I get an error message indicating "you don't have permission to save to this place... you want to save it to My Documents instead? (No, I wouldn't.)  I'm connected with my regular user profile (which has administrator privileges). Yes... I checked in the user accounts and verified. (I am the only user on the system, in case this has an impact on the problem. Not sure if I should create a "dummy" another user without administrator privileges, but just throw that out there.) This seems to be mainly when I am trying to save a downloaded file or the executable file.

  I can if not create and/or move files without problem; It's just not very welcoming for new downloads.

  Between these two issues, I'm not having fun with this all-in-One Dell Optiplex (new).  She is on a home network and the only thing I have

  reminder to do recently is to join the homegroup with one of the other Win 7 PC on the same network. Maybe this related to not having 'permission' to save in some places? Or create new folders? I'm the kind of feeling sad and rejected...

  Any ideas or suggestions would be appreciated. FYI: I try not to visit the registry on my own I do not have a Guide of techno-GPS with me. I sailed quite well on my own otherwise, provided that I the registry (or any what presses along the way.) Please think about this and do the right thing. I'll wait here with my turn signals on.
  Ciao

  Hello

  You have discovered a problem with Windows 7. To resolve this problem, I use a program called FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup