Variable information from the Captivate .swf 8 integrated and vice versa

Similar Questions

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• How to get information from the owners of devices (NMP and Powerpath) using the VI SDK

  Hello

  I just started to work with VI SDK in C++ using gsoap. I am

  facing a problem. Using VI SDK, where can I get more information

  regarding who manages the paths. Inside of the VI GUI client we can

  see that in the owner field. The GUI shows if the owner is NMP

  or powerpath. Can I get the same information by using VI SDK API? I'm not

  able to conclude within ScsiLun HostMultipathInfoLogicalUnit or

  HostMultipathInfoPath Dataobjects.

  Kindly help me.

  Thank you

  Gesner

  Ah good to know it is where it is located.

  national immunization days , you can find more info here: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.host.PlugStoreTopology.html#path

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Transfer data from local disk to Asm Diskgroup and vice versa

  Hi all

  I have two node rac installation and now I want to move the data from local disk to ASM DiskGroup.

  Is it possible, if yes, then please mention the way to him.

  Kind regards

  Ronak

  Hi all

  Thank you. Found that its possible using package 'DBMS_FILE_TRANSFER '.

  Kind regards

  Ronak

• Satellite L450D from 64-bit to 64-bit and vice versa

  Hi all

  Being an ODP I just bought this laptop to use for our club and I used the provided windows 7 dvd to change to 64-bit to 32-bit by a pure install, what a fool I was. In any case I see that Ican go back to 64-bit using the software stored on the hard drive, but the problem is that I can't find the installation file about it if someone can help me back to 64-bit please.

  Ken

  Try to start the HARD drive recovery as described under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  I don't know about you, but before the start of the installation, you should be able to choose which version must be installed.

• Color cartridge loaded in the black print cartridge slot and vice-versa - now cannot remove the

  Accidentally, I loaded the new color and black cartridges in the wrong slots, and now I can't delete them.  How can I get them without breaking the printer?

  If you have a spare cartridge you can look and see a small crest on the top of the cartridge near the front.  This is the part that is stuck.  Using a blunt knife or the handle of a spoon to gently release the cartridge down a little should allow the cartridges to be released.

• The layer mode to make text on it the light on dark areas and vice versa?

  Hello

  PShop CS6 extended.

  I want to make a watermark for photos and have the text weak and contrasting with background while for the length of the text I have, as she travels through darkest areas that he's lighter and when in the lighter areas, it goes darker.

  Thus, the line of text could go dark light then light and then dark...

  I will also then apply a bit of relief effect to it.

  I can't find an option to layer to give to this 'contrast' effect of the dark.

  Merlin3

  

  Typer in white and set its blending mode to difference. When you use the move tool to move the text layer it adapts automatically to the background color

• change the numbers by comma-dot and vice versa

  Hello

  I have this script that changes the format of the European numbers to the United Kingdom / U.S. (for example 1,000 to 1,000) and does not apply to numbers preceded by any letter.

  for now it is partially works very well, changing only those digits preceded by the letters without the space between them. for example: machine type TSK4.500 in TSK4, 500 will not be changed and that the OK.

  I need to recognize and does not also change those prefixed numbers of letters with a space:

  TSK 4,500 must not be activated.

  So I need in a few words, this script to work only with numbers by avoiding those who might be part of a name, etc..

  can someone help me please?

  Thank you very much

  CINZIA

  try {main ()}

  catch (_) {alert ("could not execute.")}

  int main() {}

  Function FindItems () {}

  If (app.selection.length == 0) {return app.activeDocument.findGrep () ;}

  If (app.selection [0] .hasOwnProperty (of"base")) {return app.selection [0] .findGrep () ;}}

  If (app.selection [0] instanceof TextFrame) {return app.selection [0].parentStory.findGrep () ;}}

  exit ();

  } / / FindItems

  BEGIN main

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.findWhat = "\\d+[,.\\d]+\\d+";

  app.findGrepPreferences.findWhat = "[?]". \\l\\u]+\\d+[,.\\d] » ;

  app.findGrepPreferences.findWhat = "[!]. [ \\l\\u]] +\\d+[,.\\d]";

  app.findGrepPreferences.findWhat = "\\d+[,.\\d"];

  var Found = FindItems ();

  var Temp;

  for (var i = Found.length - 1; i > = 0; i--)

  {

  Temp [i] = trouve.contents.replace (/, / g, ' # ');

  Temp = Temp.replace (/ \./g, ",");

  [I] found .silence = Temp.replace (/ #/ g, ".");

  Alert (temp);

  }

  app.findGrepPreferences.findWhat = "[\\l\\u]+\\d+[,.\\d]";

  app.findGrepPreferences.findWhat = "\\d+[,.\\d"];

  var Found = FindItems ();

  var Temp;

  for (var i = Found.length - 1; i > = 0; i--)

  {

  Temp [i] = trouve.contents.replace (/, / g, ' # ');

  Temp = Temp.replace (/ \./g, ",");

  [I] found .silence = Temp.replace (/ #/ g, ".");

  Alert (temp);

  }

  Hi Cinzia,

  As I told you privately, I think this grep code is better. Only, this line to change:

  app.findGrepPreferences.findWhat = / ^-* [\d,.] + \d/.source;

• change the status of a NIC of UP and down and vice versa?

  Hi, I just wanted to ask questions about how to change the status of a NETWORK adapter in ESX 3.5 of up toward the bottom using ESX commands (and vice-versa to walk down)

  concerning

  Jose

  You can also add/remove a vmnic a vSwitch or portgroup, using the esxcfg-vswitch command.

  esxcfg-vswitch - L vmnic0 vSwitch 0-> add vmnic0 to vSwitch0

  esxcfg-vswitch - U vmnic0 vSwitch 0-> remove vSwitch0 vmnic0

  -KjB

  VMware vExpert

• Pause the captivate swf while incorporated a swf flash is interacted with

  Hello world.  For reasons too complex to enter, I need to embed a quiz done in Flash, in Captivate.  This, I got, my only problem is that, because the game requires user interaction, I need the film Captivate to stop playing until they got the correct quiz!

  I understand that I can put an area of Captivate click or button on the timeline of Captivate, but which would allow the user to jump in front of the quiz, and as it is e-Learning, which is not an option.

  Is there an actionscript that I can put in the Flash quiz that allows to control the container Captivate movie?

  Thanks in advance!

  Hi Susan,.

  Variables work in CP2 and the NextSlide should certainly work. You use a skin/playback bar in your Captivate project? If so, then the path to the file, Captivate swf receiving instruction is different.

  If you use a skin test to send the Flash command like this: _parent._parent._parent.rdcmndNextSlide = 1;

  CP variables can be used to control the Captivate swf in many ways. You could use a Flash shell as a container for your Captivate swf and then use variables to manage navigation and other aspects. You can also import a Flash file in Captivate and have this file to communicate with the Captivate swf.

  / Michael

  Click here to visit the blog of www.captivate4.com

• I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I'm not

  I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?

  Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?

• Firefox Help my firefox top bar has been changed, I used to be able to get the file to bookmarks Format printed, and other services that I have found useful when you take information from the internet, where they went, I want them back?

  Firefox help

     Search
  

  "Found 0 results for" my firefox top bar has been changed, I used to be able to get the bookmarks printed Format file, and other services that I have found useful when taking information from the internet, I found bookmarks to the right of the new game to the top, but it seems not instantly friendly where they went, I want that they come back? »

  See:

  • https://support.Mozilla.org/en-us/KB/menu%20bar%20is%20missing

• Removes really all the information from the old operating system recovery disc?

  Hello!
  I wanted to know if the recovery disk that came with my Toshiba computer deletes * all * the hard disk information, * or is it possible, which has damaged the malicious software that was installed on my computer sometime before resists after using the recovery disk? *

  "If I use my drive recovery the program just wonder if I wipe my hard drive and informs me that my data will be destroyed if I use this recovery CD. After this issue alone, it begins with the recovery process. Is ' normal for this drive, he'll ask me any other questions on "what partition will recover and so on and it starts recover after this issue alone?

  What Toshiba drive cleanup could I use the case, if this recovery disk deletes all old information from the hard drive to ensure that * all * of my last hard drive is wiped clean?

  Thanks for the reply!

  Hello

  If you use the disk recovery Toshiba, all data will be erased on the HARD drive.

  Before the start of the resettlement, the HARD drive will be formatted. Malicious software and other software will be deleted.

  So you n t need another drive or another program to erase the HARD drive.

  Try it and you will see that it works. But first, back up your data.

• What is the command of shortcut for all windows get the information from the computer?

  What is the command of shortcut for all windows get the information from the computer?

  instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

  just a command for windows xp, vista, 7 for system looking for information....

  original title: what is the SHORTCUT COMMAND to get information from the computer system?

  Hello BlackSecret,

  The keyboard shortcut to get to the top of this information is Windows key + break Attn.
  
  
  Who does what you ask?

• I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  Try to install a Windows Vista driver if there is no native driver Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer