change the status of a NIC of UP and down and vice versa?

Similar Questions

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.

• Can I change the status as "Shared" to "Not shared" tab sharing a particular username?

  I need to change the status in order to part of effect of the procedure to change the above city of particular name.

  Hello Irvine007,

  In addition to dhhuang comment, I've added a few links that I hope will help.  However, we need to further information regarding the specifications of what the user is or not sharing.

  TechNet:

  http://TechNet.Microsoft.com/en-us/library/cc773004 (WS.10) .aspx

  Thank you

• How to change the status of business published in unprecedented process process?

  
  Hello

  I had created a new business process and published it.

  But I wanted to change the shape and remove undesirable element of form data.

  Then I changed BP in draft status and made change.

  But again once when I'm changing the status of BP as finished, it is in error "published form contains < element > and is removed from the upper form"

  How to solve this problem?

  Or how can I remove the item published BP form data form and publish it again?

  Hello 1001854,

  Once the BP has been published, you are unable to delete the existing data items. You will need to do is to move the you do not want to see more in a hidden block.

  I hope this helps.

• A Standard API to change the status of the project

  Hi all

  I would change the status of oracle backend project.

  can you get it someone please let me know me if we have a standard API to change the status of the project.

  
  

  Thanks in advance

  
  

  Thank you

  Satya
  

  Hi all

  This API allows you to change the status of the project "pa_projects_maint_pub.project_status_change", but make sure that 'wf_status_code' column in 'pa_projects_all' table must be set to NULL.

  Thank you

  Satya

• Change the status account without providing

  Hello

  my situation is as follows:

  I am an account for a resource supply.

  In the "create an account" task I check if there is already an account corresponding to the resource.

  If this account does not exist, I create a new account in the off State and return a 'C' status that mapped to the State of object "Disabled" in the "task of object state Mapping.

  If this account already exists in the resource, I need 'link' this account rather than create a new one.

  The problem is now I need to define the status of IOM account in accordance with the State of account, that is, if the existing account is enabled, I need to change the status of IOM "Enabled" account also.

  What are my options?

  Kind regards

  Vladimir

  You can return just a reaction called "Active linked account" and "Linked account Disabled" that triggers a separate task for each.  Create an adapter that returns a string value.  Make sure that the value of a response code.  Set the task to the status of the object mapping enabled or disabled for answer C.  Just make sure you check the box to end.

  -Kevin

• After that I changed the Duplex parameter on NIC's Service console, I am not able to connect the ESX host

  Hi all

  Please help solve my problem.

  After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.

  Concerning

  Vijay

  Hello

  As the bulb you have two problems that are not related.

  (1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.

  (2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote.  The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.

  The two problems are fixable by booting into single-user mode, set the duplex and reset the password.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Can I change the status of the component?

  Hi all

  First of all, I'm sorry for my English. But I'll do my best to explain my question.

  Can I change the status of the component?

  For example, when I click on the button, I want to change the State of the label.

  < s: states >

  < name s: State = 'A' / >

  < name s: State = 'B' / >

  < / s: states >

  < fx:Script >

  <! [CDATA]

  private function changelblState (): void {}

  / / lbl.includeIn = 'B'-> impossible

  or

  LBL. State = 'B'-> impossible

  }

  []] >

  < / fx:Script >

  < mx: label id = "lbl" includeIn = "A" / >

  < mx: button click = "changelblState ()" / >

  How can I change the status of the component?

  Thanks in advance.

  Kevin.

  Use the CurrentState property on the parent.

  s: label id = "lbl" includeIn = "A" / >

  " s: button =" currentState = 'B' "/ >"

  Piece of unsolicited advice:

  Stop using components unless necessary.  Use the spark labels and buttons (e.g. , ), especially if you want to use the architecture of great State spark.

• Change the status to completed to approved

  Hi all
  
  I have an obligation to change the status of approval of completed task to approved. I use the standard approval process.
  
  Please let me know if anyone has done this before.
  
  See you soon
  Kunal jegou

  Hello
  Have you tried in the "process task assignment" tab of configuration process task. For the particular task you must map "Completed" approved by double-clicking the mapped field to finished. It will give you a list of the names of the tasks, you will need to change to "approved".

  I hope that you have already solved your problem.
  All the best,
  Manila

  Published by: user2070855 on March 14, 2011 06:12

• Change the status of redolog

  Dear all
  
  I have this output
  
  GROUP # STATUS TYPE MEMBER IS_RECOVERY_DEST_FILE
  
  1 E:\orcl_FILES\orcl\REDO21 online. JOURNAL NO.
  1 E:\orcl_FILES\orcl\REDO11 online. JOURNAL NO.
  1 E:\orcl_FILES\orcl\REDO31 online. JOURNAL NO.
  2 F:\orcl_FILES\orcl\REDO12 online. JOURNAL NO.
  2 F:\orcl_FILES\orcl\REDO22 online. JOURNAL NO.
  2 F:\orcl_FILES\orcl\REDO32 online. JOURNAL NO.
  3 Q:\orcl_FILES\orcl\REDO23 online. JOURNAL NO.
  3 Q:\orcl_FILES\orcl\REDO13 online. JOURNAL NO.
  3 Q:\orcl_FILES\orcl\REDO33 online. JOURNAL NO.
  
  
  GROUP # STATUS OF ARCHIVED MEMBERS
  
  1 3 UNUSED YES
  2 3 CURRENT NO.
  3 3 UNUSED YES
  
  
  When do the select two
  SELECT GROUP #, MEMBER, STATUS, ARCHIVED FROM V$ LOG;
  
  
  Select * from v$ logfile;
  
  Why the State values is null in the first select statement.
  
  in the second, select how can I update the status of Group 1 of redo log to the current value, and I need to stop the database status update.
  
  Thanks in advance

  You have not listed outputs and queries in the same order.

  The first release listed is for the second query listed? Is this fair?

  V$ LOGFILE lists the files - that is to say the members of each group of Redo Log. A NULL state means that it is good! (Other statuses are "INVALIDS", "FADE", "DELETED", which are not so good).

  V$ LOG lists of Redo Log groups. "UNUSED" status means that it is a new group and LGWR (newspaper writer) has not yet started writing to her. This is the status becomes 'CURRENT' startup LGWR writes for her. (Once LGWR ends in writing for her, the status changes to 'ACTIVE' until the log switch checkpoint is completed and the archiver has completed all a member of the Group of Redo Log archiving).

  You have not ' do anythiing ' to change the status of the Redo Log groups. State changes when LGWR writing begins and ends in writing. You can, if you wish, make see command 'ALTER SYSTEM SWITCH LOGFILE' change in status that LGWR switches from one file to another group from one to the other.

  A group of Redo Log can consist of 1 or more members. 2 members would mean that they are 'mirrors' of each other - for redundancy (in case of failure of one when he became "INVALID").

  Please read the manual of Concepts and Reference Manual documentation.
  Go to http://tahiti.oracle.com or on the tab "documentation" to http://otn.oracle.com for documentation.

  Hemant K Collette

  Published by: Hemant K grapple on January 12, 2011 22:39

• Add or change the status of subject?

  Hello

  I am fairly new to this community and may also not yet that familiar with RoboHelp 9, I used recently. I have notices that there is the possibility of changing the status of subject for example on loan for the examination etc. in RoboHelp.

  We work in a small team of 3, often on the same project using RoboSource. I would use the status of subject in order to follow if the author or the translator has completed all its work to ensure that follow-up author is aware that he can basically start with its tasks. I know there is the to do list, but I did not find as tools of reporting practices on the status of subject.

  My question is now, is there an option to increase the status of additional subject or any chance to add the to-do List example to the pod list items as column title? Perhaps there is a more practical way to achieve the same result.

  Thanks for your help!

  Kind regards

  Christian

  Welcome to our community

  See if the video below helps you sort.

  Click here to see

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How can I change the font size in my message list and date in Windows Live Mail

  Original title: windows live mail

  How can I change the font size in my message list and the date

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all