Vary the accounts based on the selection of feature in data form

Similar Questions

• ESXi 4.1 change the selection of trace on data warehouses

  ESXi 4.1, I have a couple of data warehouses that were not configured correctly. The selection of the path is set to fixed, while the other data stores have alternate-control storage IO. I'm looking for the less risky/disruptive way to change the configuration of these data stores. There are 15 ESX hosts.

  When to change the configuration of the data store is all for example conditions pre move VMs in another data store, stop the virtual machines etc.. Y at - it any disturbance to the ESX host?

  Hello

  Changing paths is not disruptive and can be done online, as long as takes care of the storage and SAN network is in good health.

  Validate it seems that some are on Round Robin and I presume that it is on the same storage array.

  You can do this by running a PowerCli script to modify the path selection: Home

  I don't have the scrip to activate SOIC

  Concerning

  Please allow points to useful/correct answers

• Default value for the select list of type of form elements

  Hello
  
  I do not work with Apex that mutch, so this may be a simple question... but I still need help.
  I have a form, in this form, I have a question P19_ONTVANGER_ID, this is based on a LOV.
  This LOV is on a table that has a field of username with the value of APP_USER.
  The table looks like:
  ONTVANGER_ID this is the PK and is going to be the return value from the LOV.
  NAME is the display value for the LOV.
  USERID is the column APP_USER.
  
  What users would like to get is that if they create a new record, the default value for the P19_ONTVANGER_ID field is their own ONTVANGER_ID.
  But they must also be able to select another user.
  
  hope there is someone out there that can and will help me.
  
  Kind regards
  
  Rob
  
  APEX 4.0.2 Oracle 10

  Rob-v-M-Gn-Nl wrote:
  Until now, I had, but I need to select the value of the id of the table and the list of selection item appears the corresponding value.

  How can I do this?

  You can select the Type of default value as the body of the PL/SQL function

  and to add something like that

  declare
  v_return number;
  begin
    select your_id
      into v_return
    from your_table
    where some_column = :APP_USER;
   return v_return;
  exception when no_data_found then
   return null;
  end;
  

  http://www.asktheoracle.NET/PLSQL-function.html

• How to reorganize the POV and the Page dimensions in a data form?

  version 11.1.2.3

  I have built my forms of data but want to rearrange the dimensions within the page selection while keeping my choices.  I can't drag and drop, right click and move up or change the section.  I can move upward members individual in a dimensions however for the page, but not the dimensions themselves.

  You can drag a dimension out of the section POV or PAGE (in another section) and bring her back.  It will be added at the end.  Drag in and out of dimensions until you have the desired order.

  Hope this helps,

  -Jake

• validation for each 1,000 records to be inserted in the select statement

  Hi, I have the following INSERTION in the SELECT statement.
  The SELECT statement (who joined) data fo about 6 crores. I need to insert this data into another table.
  
  Please suggest me the best way to do it.
  I use the INSERT in the SELECT statement, but I want to use the statement commit for each 1,000 records.
  
  How can I do this...
  

  insert into emp_dept_master 
   select e.ename ,d.dname ,e.empno ,e.empno ,e.sal 
     from emp e , dept d
    where e.deptno = d.deptno       ------ how to use commit for every 1000 records .

  Thank you

  Method 4 is the best

  You could combine method 3 and 1 (without dynamic SQL)

  Method 2 is the less optimal solution from the list.

• Invalid results based on the select list

  Hello
  I've set up 4 LOVs cascading in a test application. They fill each value based on the value of the parent cascading with success. My example is based on the query Ajax Denes Kubicek - Section III - for example - http://apex.oracle.com/pls/otn/f?p=31517:135:1771969688591802:NO. But I use 4 Cascading Select list not 4 text fields. My problem is that I am not able to scroll through records using the previous and next unless I select all 4 list selection of waterfall to fill the data in the record. I would like to be able to select the 1st list select then click on the search button to fill in the data of the registration for the selected value. Then use the previous and next to scroll through the data in the record. This code allows selection of cascade 4 list to keep focus when the key search selected. But the correct data are not returned if I only select 1 list select value and then click on the search button.

  //  alert('TagName=' + l_El.tagName + ' id=' + l_El.id)
                  if(l_El.tagName == 'INPUT' || l_El.tagName == 'SELECT') {
                      l_El.value = l_Value;

  Published by: Charles was October 8, 2009 07:53

  Hi Charles,

  OK - it works now.

  I made a few changes here and there. Basically, I defined by default for four '-1' lists and accounted for this through the page and processes. You had the wrong name for the last item in your function onLoad(), so I've changed that. Also notes that the question of the "closing date" must be formatted with a date MM/DD/YYYY formats to ensure that these are properly (the date of default real format came in the form DD-MON-AA, so you would have questions there if you don't stick to a single format). For each item, you can choose another value by default if it makes more sense for you, but you go through every place where the list is mentioned/used for updating the-1 for her to this new value.

  The processes themselves also tried to update the four lists as you go through the records. As the lists would not necessarily have all the values on them (you can click on search without making any selection, for example), I disabled these bits. However, you you should consider adding to the class section of THS page as new, so that the user can view all the information. The alternative would be to have all the lists display all the values unless otherwise filtered by their parent list - always feasible, but may be confused?

  Andy

• Change the content of the page based change the selection box

  Hi all

  I want to create a page with 2 box selection and 1 table below

  • Selection box
    • Box1: 1-12 (months of the year)
    • Box2: 2010-2015 (year between 2010 and 2015)
  • Table
    • Get data from view GET_DATA_SALARY. This view having a 4 column: NAME, SALARY, FAC_MONTH, FAC_YEAR
    • This table will be based on the selected value of 2 boxes above change

  Please help me solve this problem.

  Thank you

  To put it simply, add a button that submits the page.

  Add a where clause clause to your report

  where FAC_MONTH = P_MONTH

  and FAC_YEAR = P_YEAR

  Gus

• How can we make a visible element on the screen based on the selection of an existing menu in the same screen

  February 2015 release OPA

  How can we make a visible element on the screen based on the selection of an existing menu in the same screen.

  I have a list box and a text box in the same screen.

  I have a visibility rule on the text box saying that it is only available for one of the selection in the menu dropdown.

  problem is now unless I hit the button next to the screen and return to the original screen the text box does not appear.

  Is there a solution to more to come this problem.

  Please help me

  The feature you describe is called "dynamic visibility" (http://documentation.custhelp.com/euf/assets/devdocs/february2015/PolicyAutomation/en/Default.htm#Guides/Policy%20Modeling%20User%20Guide/Interviews/Screens/Add_questions_to_screens.htm#Dynamic). It allows to control the visibility of another article on the same screen, without writing a separate rule of visibility and click on Submit.

  Using out-of-the-box functionality, you can have dynamic visibility based on Boolean values and value lists (but not regular drop-down lists).

  The example in the February 2015 User Guide based on a Boolean value on the same screen. See slide 27 of the bridge-features and benefits for an example of what it looks like to a list of value: http://www.oracle.com/technetwork/apps-tech/policy-automation/overview/opafeb2015featuresbenefits-2431219.pdf

  If you are wondering what is a list of values, see here: http://documentation.custhelp.com/euf/assets/devdocs/february2015/PolicyAutomation/en/Default.htm#Guides/Policy Modeling User Guide/Value_lists/What_is_a_value_list.htm

  See you soon,.

  Jasmine

• AF:selectBooleanRadio based on the language of expression of the selected property

  I have a code element.

  I want the selected property based on a condition.

  But I am never successful.

                              <af:panelGroupLayout id="pgl6" layout="horizontal">
                                      <af:selectBooleanRadio id="sbr12"  group="Mediatype" autoSubmit="true"  text="360" value="360"
                                      selected="#{pageFlowScope.uploadController.typeOfMedia eq 'threeSixty'}"
                                      valueChangeListener="#{pageFlowScope.uploadController.disactivateAttachment}"/>
                                      <af:selectBooleanRadio id="sbr22"  group="Mediatype" autoSubmit="true"  text="980" value="980"  
                                          valueChangeListener="#{pageFlowScope.uploadController.activateAttachmentIE}"/>
                              </af:panelGroupLayout>    
  

  Selected = "#{pageFlowScope.uploadController.typeOfMedia eq 'sixty'} '"

  Problem solved on your useful advise

  -using the different media groups

  -partial release from the other

  -by using the Boolean property for selected

• Reading JSON file based on the selected drop-down list item

  I have little code shown below.

  I'm trying to read data from a JSON file based on certain criteria, in this case all the suburbs on a territory
  

  I can do that quite easily in a liquid hard coding the territory, however, I want to use the value of the < select > option

  I understand that this can be achieved with JavaScript, is it possible otherwise?

  < select id = 'territory' >

  < option value = "xx" >--please select--< / option >

  < option value = "CBD" > CBD < / option >

  < option value = "North" > North < / option >

  < option value = "South" > South < / option >

  < / select >

  {model module_json json="/_System/shipping/shipping.json" = "" = "shipping" collection "}

  < select id = "suburbs" >

  < option value = "xx" >--please select--< / option >

  {% for section in shipping.territory %}

  {% If the element.} TERRITORY is '< value on top of select >' %}

  < option value = "{{point." POSTAL CODE}} "> {{point." SUBURBS}} < / option >

  {% endif %}

  {% endfor %}

  < / select >

  Hi Craig,.

  You can skip liquid altogether and use JS to get the values you need for json.

  If you want to use liquid you need to load the last part with AJAX/XHR to enter the selected value.

  1. create a new file suburb.html and ajax request after #territory selected with the option as a parameter:

  URL: suburb.html? = north shipping

  2. the suburb.html file would be:

  {assign = globals.get.shipping-% selectedTerritory %}<- this="" will="" have="">

  {model module_json json="/_System/shipping/shipping.json" = "" = "shipping" collection "}

  --Please select--

  {% for section in shipping.territory %}

  {% If the element.} TERRITORY is selectedTerritory %}

  {{point. SUBURBS}}

  {% endif %}

  {% endfor %}

• Select list THAT LOV based on the selection of the Parent list

  
  Hello

  I'm pretty new to APEX and which seems to be a pretty basic question, but I don't know how to do it.

  So, I have two items in the selection list on my page and I need to dynamically change LOV in the second list based on the value of one of the parents.

  I think this question been here before, so could someone just tell me the answer?

  Thank you very much

  Leo.

  Leo_Y wrote:

  I'm pretty new to APEX and which seems to be a pretty basic question, but I don't know how to do it.

  So, I have two items in the selection list on my page and I need to dynamically change LOV in the second list based on the value of one of the parents.

  I think this question been here before, so could someone just tell me the answer?

  To get the right answer, you must ask the right question.

  Integrated support in cascade LOV is addressed in the documentation.

• How to calculate the sum of two digital form fields based on the selection of the checkbox.

  I have a form in Acrobat Pro who needs a custom calculation. How to calculate the sum of two digital form fields based on a selection of the checkbox. I have three number fields. Field-A and B are simple one or two digits. Field-C is the sum, or the total field. I want to field-C have a control box which, when turned on and off, just gives a. gives the sum of A + B

  _ Field - 2

  _ Field - A 4

  [check] _ _ field - 6 C

  [disabled] _ _ field - 2 C

  Thank you

  The custom field C calculation script could be:

  (function () {
  
      // Get the values of the text fields, as numbers
      var v1 = +getField("A").value;
      var v2 = +getField("B").value;
  
      // Set this field's value based on the state of the check box named "CB"
      if (getField("CB").value !== "Off") {
          event.value = v1 + v2;
      } else {
          event.value = v1;
      }
  
  })();
  

  Replace 'A', 'B', and 'CB' with the real names of the fields.

• When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting?

  When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting? I would like to know what changes, so in the future, I can set my camera to one who will give me the highest quality in a first time, which allows me to make cultures and always preserve the quality.

  Thank you

  Dovid

  Thank you twenty-one... your answer of common sense to me.

  so, in short, can I assume down the chosen quality over compression algorithm?

• Calculate the value based on the selection of the checkbox

  People from g ' Day,.

  I have myself a little stuck on a job that I have here, this javascript Gets the better of me.

  The idea is that this script takes the total sub and adds a surcharge for credit card (in percentage) based on a selection of the checkbox, then spit out the value to be entered in another field.

  If someone could have a quick look over what follows and let me know where I went wrong, it would be appreciated.

  ---

  Subtotal var = this.getField("SubTotal").value;

  var mastercardTick = this.getField ("MasterCard");

  var visaTick = this.getField ("Visa");

  var amexTick = this.getField ("Amex");

  Var extra = this.getField("CreditSurcharge").value;

  card credit var = this.getField("PayCredit").value;

  If (creditcard.value = 'Off') {}

  Event.Value = 0;

  } else {}

  If (mastercardTick.value = 'Yes') {}

  overload. Value = (1,2 / 100) * subtotal.value;

  } ElseIf (visaTick.value = 'Yes') {}

  overload. Value = (1,2 / 100) * subtotal.value;

  } ElseIf (amexTick.value = 'Yes') {}

  overload. Value = (3.75 / 100) * subtotal.value;

  } else {}

  Event.Value = 0;

  }

  }

  ---

  For lines like these:

  overload. Value = (1,2 / 100) * subtotal.value;

  If it should not be as:

  Event.Value = (1,2 / 100) * subtotal.value;

  The variable supplement is defined at the beginning of the script to the value of the field, so the surcharge.value parameter is not any sense.

• Quarter filter based on the selected month

  Hi all
  
  I need to filter the report with quarter based on a period in the report guests.
  
  The user selects the name of month in prompt report, the report should show the information of quarter data falling from the chosen month. I used the subreport that provide a quarter of the month. This degrades performance report, so I need a solution to find a quarter of the month in the filter of the report itself. Can anyone provide an idea on that?

  Well, now that I know the syntax, it should work for you:

  Assumptions: "month" is in the format "LUN - AA' (DEC-11); quarter is in the format "YYYY Q M" (2012 Q 2);

  Here are the pieces of the CASE statement...

  LEFT (' @{pv_month}', 3)... allows at least 3 letters ("Jan", "Feb", etc.) of the selected month...

  .. Right('@{pv_month}',2) .save the month selected two-digit year...

  Cast (Right('@{pv_month}',2) AS INTEGER)... .converts as a whole two-digit year. It is how we use the year in a calculation to determine the correct exercise when the month is September, October, November or December. In this case, (11) two-digit year is less than the tax (2012) year.

  Here are the facts:

  Q-11 MAY 2011 3 MAR-11
  JUN-11 AUGUST - 11 2011 Q 4
  SEVEN.-11 TO 11 - NOV 2012 Q 1
  DEC-11 TO 12 FEBRUARY 2012 Q 2
  etc...

  The above represents an exercise. As you can see, for the months from March to August, the exercise is the same as the selected year (all that is needed is to convert the year to two digits of a four-digit year).
  When the month is seven, Oct or Nov, the year must be incremented by 1. Month Jan and Feb, exercise is identical to the year chosen, but Dec must be dealt with separately, because even if exercise is the same as Jan and Feb (2) year should be incremented.

  Gather all this logic, you get the following:

  BOX WHEN IN LEFT('@{pv_month}', 3) ('SEP', 'OCT', 'NOV') THEN '20'. Cast (Cast (Right('@{pv_month}',2) AS INTEGER) + 1 AS CHAR). "Q 1'
  OTHER CASES WHEN leash (' @{pv_month}', 3) = 'DEC' THEN '20'. Cast (Cast (Right('@{pv_month}',2) AS INTEGER) + 1 AS CHAR). "Q 2'
  On the OTHER BOX WHEN IN LEFT('@{pv_month}', 3) ("JAN", "FEB") THEN '20'. Right('@{pv_month}',2) | "Q 2'
  OTHER CASE WHEN LEFT('@{pv_month}', 3) IN ('MAR', 'April', 'MAY') THEN '20'. Right('@{pv_month}',2) | "Q 3'
  ANOTHER BOX WHEN IN LEFT('@{pv_month}', 3) ("JUN", "JUL", "Aug") THEN '20'. Right('@{pv_month}',2) | "Q 4'
  END END END END END

  This will give you a quarter based on the selected month. You can use in the filter (Advanced > convert this SQL filter) and apply it on your column 'quarter '.

  WARNING: I did at home in order to check the syntax...