VCAP5-DCA, vSphereclient, CLI, type of question

Similar Questions

• VCAP5-DCA Format Question

  
  Someone at - it can give me an example of the format question for this review. I'm asking you to violate the NDA, I'm looking for more for the type of stroke that matters. For example

  Q1 - go and set up a new cluster for the following customer requirements - HA HA, vMotion, DRS and FT

  or

  Q2 - needs to have their virtual servers fully load balanced and protected against defects of one host, while having vm1, vm3 and vm2 not experience any downtime due to a fault in the unique host.

  Thank you

  Ed

  Another sample is here

  Anexinet Site of Blog ISG: My VMware Certified Advanced Professional 5 - experience in data center management (VCAP5-DCA)

• VCAP5-DCA exam questions

  You are able to read each question carefully to review before you start your first task? I don't know whether to click through 26 screens to see each question or figure it out in the begin block? Thank you

  Ed

  Yes, you can click around the review, as you can do on most VMware exams.

  There is a school of thought that clicking through all the questions and take notes you if an item is a 'create' or 'admin', their organization and then clicking back to the beginning will save time to review.

  There are a few problems with this:

  -This excersise will take you 10-20 min.  Since you have an average of 8 minutes per question, you give ~ two questions when you try this method.

  -try to determine how long will take an item or if the item is a 'creation' or 'admin' question before trying the question in fact is not always possible.  Many questions have troubleshooting components that aren't obvious until you try them.  Some read as a matter of "admin" but actually need to create components on the fly.  Some of the lists "create xxx" but that's actually a later configuration element and the question really is a "question of the admin".

  -l' review is designed to take one at a time, in order.  Items that can cause disruptions tend to go towards the end of the examination, the elements that improve the performance of review go near the front.  The items that can interfere with other elements are carefully.  A passage which does no favor.

  Note that these points are all exams live-lab, not only VCAP5-DCA, and some points are more important in some reviews.

• Benefit of DCA on July 15 quick questions

  Hey all,.

  I will write my DCA 15 and had a few questions:

  1.), I have heard many people say that the lab is slow / lag / or sometimes has problems on top of that all the blogs I've read States time is your worst enemey on this test since you essentially about 8 min a question at the end of 26 questions in the time.  In this spirit, I found this on the following blog: http://blog.marccrawford.com/vcap5-dca/

  Use Adobe search for advanced search for something in all PDFs in a folder: when you start the test, open one of the files PDF and the go in editing-> advanced search. Select all PDF Documents in: and then click Browse for location... option.   Navigate to the folder containing the PDF of vSphere PDF files, and then click OK.  Enter your search term and click on the search button. This will allow you to quickly search through all of the PDF files with a single search. That being said, always know specifically for your research or you will end up with a large number of useless results. For example, if you want to find advanced settings to control Admission HA, knowing that the parameters start with das. will result in the targeted search hits. You can practice this technique before the test by downloading the PDF files using Adobe advanced against them.

  Someone has tested it on the review and find that it allows to save their time.  I was memorize pages and chapters of the sections that I believe that I might have to pick up so I can quickly return to it if an impasse, however if it works well and does not tax the lab system I could give it a go

  2.) what the article exhausted blue you feel is struck most, if it is breaking all NDA don't answer, just curious to what were other peoples experiences.

  3,) for my work as preparation for the exam, I took Jason Nash internship Pluralsight.com formally Trainsignal, Ran through the blue print and lab'ed everything I could, walked through the study of Chris Wahl record: http://wahlnetwork.com/2012/07/02/the-vcap5-dca-study-sheet/

  creating notes along the way, Ran in the DCA of Paul VCAP5-DCA objective 2.2 preparation guide - set up and maintain a VLAN, PVLANs and VLAN settings. Adventures in a virtual world, looked at all the other videos on topics that I could and read no matter what additional KB on the themes.  I work with VMware since version 2.5 so I do things everyday for awhile now, but worry not about the stuff you do not on a base on the day the day or the 1 stop stuff like port mirroring.  I have to drive 4 and 1/2 hours for the person testing center nearest professional view of you, so I really don't want to have to re - write this is there anything else that I missed or I can do please let me know, however, I'm almost to the point where I'm tired of study

  Thanks for any advice you can give,

  
  See you soon!

  NSX is not on the DCA550.

  What are the documents you are looking for?  PDF files provided in the review?

  I do not see a name associated with your profile, I guess that you contacted me on TT?

• VCAP5-DCA my thoughts

  Dear friends,

  Review VCAP5-DCA today to Reading, to the United Kingdom and thought, I'll share my experience.

  Prepared for almost 4 weeks and it was a good experience all together. Participated in 23 questions and ran out of time. Used many materials for preparation, but I think that most of those import have been TrainSignal course of Jason Nash and of this forum.  There were times where I just couldn't study more (my brain was abt to explode) and I use just to listen to Jason and walk around or go to bed with a computer laptop near home. You can't go wrong with an investment of $49 / month. This is my^th 14 certification (if I pass it) and I'll start DCD after two or three days as well as the EMCTA.

  1. Don't try to go through all the question in the beginning itself. If you take 30 seconds to read a question in order to understand and make a conscious decision that this is easy or not,

  You will have average waster 13 minutes or more you do not!

  1. Try at least 8 issues/hour time and make sure that you push yourself to access (skip the question if you have to fight when you read)
  2. Allow at least 10 minutes to see the PDF (unless you're a Robert of Palo Alto - that know everything). Combine your pdf if possible research to the 2^nd time and use options - ask your pad to write it down--especially the cmd for two notebooks and on one, note the IP and password so that a simple pattern - takes about 2 minutes
  3. Take your fluid intake to a minimum, I lost 4 min for a break from the bathroom (Yes, I counted)
  4. These aren't questions that kill you, but the time take it easy
  5. Don't forget, it's the best chance to show the world and your business that you are not a clone of testking. Participating in the review itself shows that you have it in you J
  6. Ensure that go you through the forum and get as much detail as you can... it isn't hard, as long as you are committed and spend at least 3-4 weeks for the study
  7. Try it in the lab again and again... even things simple will come and haunt you while you are in that Chair, do not take anything for granted...

  Good luck!

  DMK

  Exactly after 15 days, received the email from VMware on the outcome of the test. The subject line did not mention the results and had to watch PDF attached.

  Yes! The result is positive... I am a VCAP5-DCA now MANAGED. Thank you all... Party of the time :-)

  Kind regards

  DMK

• VCAP5-DCA - this laboratory review is slooooooowwwww!

  Sam VCAP5-DCA review today. It was really frustrating. RDP screen redraws sometimes took 30 seconds. It wasn't something that I didn't know how to do, however I started to skip questions that required a lot of clicking because of GUI performance.

  At some point, I also had a problem PEBCAK/self-inflicted, that made me lose my connection to some of the basic infrastructure - I know, I'm a fool. By train to rush through these performance issues in environmental laboratory cracked my temper and compulsive double control before you click Ok.

  Anyway, the TA ended up calling VMware on this subject, but at the time wherever she had someone on the line, I had resolved my own mess, that she told them to do not take into account. However, a bunch of configuration that I had done had been cancelled. Without getting too specific, I had configured components absolutely would not have been affected with my mistake/uninstallation procedure, and a bunch of it was missing. This whole ordeal cost me about an hour.

  Anyway, I ended up answering 20.5 to 26, and I felt as if I really knew the documentation. I guess the moral of this story is don't break your lab and if you do, don't tell VMware to this topic.

  This expectation is going to be brutal...

  I had very similar problems as well, best you can do is email [email protected] and describe in DETAIL how the environment awkward review have prevented you from answering all the things you knew. Provide your and site Details when you send them.

• VCAP5-DCA tests on vSphere 5 or 5.1?

  Hi people,

  As the title suggests, can quick question, someone tell me if the VCAP5-DCA tests you 5 or 5.1? I just had a look at the review plan and he got vsphere 5 everywhere, but I need to be supported by these people here. I realize that experience of the review is probably as much as it may and 5.1 has several improvements, I don't want surprises. I'm about to rebuild my lab and need to do things. Thank you.

  5.0

  We have tried to make issues as version neutral as possible to ensure that the review could last as versions have been introduced (at least until the first digit changes or there is a quite significant change).

• VCAP5-DCA terriable experience

  I was scheduled for the VCAP5-DCA exam on October 4, 2012.

  When I arrived at the Center Test I registered and the sign says I was planned for VCAP5-DCA.  The test proctor me sitting at the computer and connected me and I responded to the survey.  I finished the survery and click next to begin the examination.  After that, a screen came and told me that the issues and the environment were based on vSphere 4.  I knew something was wrong so I called during the test proctor and she called Pearson view and the person on the phone told me to continue to see what the environment was like.  I therefore continued and determined that the environment was vSphere 5.  At that point, I thought everything was ok, but I've always had a hunch that the questions were questions VCAP4-DCA.  If the person on the phone and test proctor told me to continue with the review, but I continued with the questions, I knew that the questions were based on vSphere 4 (VCAP4-DCA).  If I had version vcap5-DCA asking then I have only 26 questions, but my review had 34 questions, so I knew that I don't have the correct versions.  A question was even asked to configure something on the vMA that is no longer possible in vMA vSphere 5.  There was a lot of questions which did not correspond to the top with the lab environment.  There are questions which asked me to do something for a virtual machine, but the VM was not there.  There was so much other stuff like that.  I called during the test proctor again and told him, but she said I had to continue and drop and incident at last report.  I filed an incident report and yesterday I was told by Pearson view that there is nothing wrong with the examination or questions.
  I was originally scheduled for the consideration of the VCAP4-DCA and then it changed to VCAP5-DCA review.  After the examination ended I called Pearson view of incident report, they told me that there was a confusion because I had initially signed for VCAP4-DCA and they think the test center was never given this information, but ultimately PearsonVue says he's investigating and nothing was wrong with the exam.  I don't see how this is possible when the start screen says it draws on vSphere 4.
  I think that my $400 has been wasted because I was given the wrong exam and now Pearson view won't help me.

  I sent an email to [email protected] and I await the response y.

  Is there anything else I can do?

  Crawformdm,

  You can me pop an email directly to stipend [at] vmware.com? I'm not the person directly to deal with this (and given that this is a weekend) but I would like to send directly to our certification team and get them to help you with this. When you email me, include all the details you can think beyond what you wrote above.

• When I type a question in the search box, I want that my question to stay there until I checked all the results of the research

  I have Windows 7-64 bit

  When I type a Question in the search box, I want my Question to stay there, until I checked all the search results!

  Whenever I have check a result, my question goes, and then I have to type my Question even once! We don't waste any the end of time!

  My Question must stay there until I've done my research and I hit another Question!

  Thank you.

  N.Williams.

  Original title: Windows search problem

  Hello

  If you run a search in Windows 7 from the Start Menu search box, the search string is not saved in the search box. This is normal.

  However, if you are looking for using the search box on the upper right corner of the Windows Explorer window, the search string is saved in the search box and stays there until you delete it or close the Windows Explorer window.

  Reference links:

  Windows Search in Windows 7: http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-search

  Find what you are looking for: http://Windows.Microsoft.com/en-us/Windows7/help/find-what-you-are-looking-for-staying-organized-in-Windows-7

  Hope this information helps.

• VCAP5-DCA exam Discount?

  Hi all

  I'm about to program my VCAP5-DCA exam, are there discounts or promotions running, at the present time?

  Thank you

  Dan

  Try the code mentioned in the blog and see if it helps

  http://www.vexperienced.co.UK/2013/10/14/VMware-certification-exams-50-discounts-2013-offer/

  If you have Asia-Pacific free second shot available http://mylearn.vmware.com/lcms/web/portals/certification/promos/VMware-EDU_10x21cm_Free2ndAttempt_ANZINJPKR.pdf

• VCAP5-DCA worth / request?

  I got my VCP on 24 August, and then I started off on 30 August due to budget cuts (the story of my life) my dream job after being there for only six months. I've been looking for a new job; but unfortunately there is not a lot out there. I don't want to just sit and do nothing. I want to advance my career.

  
  

  I'm so debate to go for certification VCAP5-DCA. The problem is that I don't know if I had to do it now or more later. I have only six months of the base of practice and I don't want to experience VMware based real world. I don't want to fall into the trap to get certification to get experience, a trap, I came across many, many times before.

  
  

  Now, if I worked for a company who asked me to do, with the final result, get a promotion or a raise.  Then I'd be more open to getting the VCAP5-DAC,
  

  
  

  VCAP5-DCA is different because it's a hands on review. Unfortunately, VCAP5-ACD is not all that is well known in the world of work, compared to VCP. I looked in effect now and there are only about 10 jobs in the entire nation that specifically list the VCAP5-DCA (two listed in the VCAP5-DCA, two VCAP4-DCA and six the VCAP-DCA).

  
  

  So I'm a little unsure on that so few people have heard of and the fact that I have so little hands on experience of the real world VMware certification.

  
  

  Any ideas or suggestions would be greatly appreciated.

  HR/recruiters have not heard of him, but the it Department usually.  You need to explain what it is and get them to wonder why none of the other candidates have it - HR, but it does not work.

• VCAP5-DCA

  Has taken my exam today for the VCAP5-DCA. Wow that was slow.

  I hope I passed. I'm sure it'll be close that I wasn't able to get to the last issue of torque, but if it does not lag as bad as he did I would have finished an hour earlier.

  Now I am waiting for the results... A way to speed this up?

  Discovered today that I passed! VCAP5-DCA

• Adobe Captivate 7 - is the review of the results of the quiz based on the types of questions?

  Adobe Captivate 7 provides the function that you can review the questions, and you can see which of them have answered correctly and that one of them has responded incorrectly. In my e-learning project, there is an exercise that consists of multiple choice questions and drag and drop tasks. This question / task landslides are among the content slides, this means for example after 5 content slides are a 2 slides, it issues then 3 content slides and slide 1 question and so on. The results of all the types of questions - multiple choice questions, drag and drop - are included in the results of the quiz. At the end of the e-learning the 'quiz' results slide comes with the button "check Quiz." I tested this function after exporting the e-learning of Adobe Captivate7. I noticed the following: If you click on the button "check Quiz" the learner back to all the question slides he or she responded. For that on question slides were automatically placed the buttons 'next' and 'back' and the 'inspection' on the ground it is written what the learner has responded to the two first questions are multiple choice questions. There, it works fine the two buttons will appear. After clicking on the button 'next' on the first question slide that contains a multiple choice question, the learner is the second slide of the question, which also contains a multiple choice question. The third issue is a task of drag / move. He do not appear the buttons so the quiz review stops and there is no field 'inspection '.
  
  How do I review the quiz works correctly despite types of questions?

  You will need to create the buttons that you want the slide D & D and format them to look like buttons on the other Quiz slides. Then hide them by deselecting "Visible output" in the properties panel.

  For these D & D slides, you will need a conditional action advanced or shared to be triggered on enter. The action will check the value of the system variable cpInReviewMode, which is a Boolean with the value of 1 by Captivate when you're in playback mode. If its value is in fact = 1 show you the hidden buttons. If you group these buttons, you will need only a single command:

  IF cpInReviewMode is equal to 1

  See the Gr_Buttons

  Continue

  ON THE OTHER

  Continue

• authorization vCAP5-DCA

  Hi all.

  After you apply for permission to receive the approval VCAP5-DCA I ve how many days to the exam?

  Thank you!

  Until he retired.

• VCAP5-DCA test available in Costa Rica?

  Hi guys

  is there a way whether it is to the Costa Rica VCAP5 DCA? I mean that I heard in some countries, that the electronic test is not available?

  and BTW how much it costs?

  Thank you very much

  $310USD to Costa Rica (and Panama).

  Using the Pearson view links above, the nearest test centre will be USMA in the Panama:

  Test center:	USMA
  Address:	Alfaro Ricardo J. Ave. Main Headquarters Edificio C, Planta Alta, invaluable. C 122 Panama 0819-08550 Panama

  There are also centres of test to Tegucigalpa and San El Salvador.

  Note There are 11 places in Costa Rica to take the VCP/VCA-level exams.