vCenter for lack of SSO and no. log in the same root not

Similar Questions

• datafiles and redo logs on the same drive

  Hi guys,.
  
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/onlineredo002.htm#i1306224
  
  >
  
  Data files should also be placed on different disks of redo log files to reduce contention in writing of the data blocks and redo records.
  >
  
  I really think if he actually any challenge when the first of all oracle can only writes files 1 redo log at a time.
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/onlineredo001.htm
  >
  Database only Oracle uses redo log files at the same time to store redo records written since the restore log buffer by progression. Log roll forward LGWR is preparing actively to is called the log during recovery.
  >
  
  If the process flow, I got after reading the chapters is
  
  When LGWR fills a log file of redo (roll forward records) then there will be a log switch + control points where writing for data blocks occur. There seems to be a flow series rather than a simultaneous sort of flow. So I don't really understand it when he speaks of contention will take place when records of data and files written redo which is the redo log file are on the same disks.
  
  Just to confirm with you guys, whenever there is a switch of newspaper one point of control occurs too right.
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/onlineredo002.htm? You can search checkpoint to access the section she made mention of this documentation.

  Think about this:

  Restore means to keep the information around in case you need to re-do (recovery or standby mode, i.e. the continuous collection). Updates as you do in a broad sense will be so potentially being twice, once for the data files and once to do it again. I'm sure you understand that the data is written in memory, and then later to the data by the writer of the db files, while there could be many more group of writing data, or they may even be long delayed. In addition, the data files are read at random, so you can't really think again in series compared to the data. Do it again is series, archiving is set, but the data is random, and random how depends on how your system is used.

  So that means all the type of reads and writes per redo and archive is fundamentally different from data and cancel. In the first case, you want to be able to breath out as I/O that you can, for the latter, you want to be able to randomly reading or writing at different times, with Oracle being smart enough to do a bit of it in memory and optimistic enough to make assumptions on when to do things and quite lazy for not doing everything right. Roll forward is critical.

  A while ago, someone pointed out that the e/s modern buffered in memory, do not really worry about this, because all the work required to set up and maintain it after spending records, fees are not much better than striping and mirroring everything (you can google SAMI). This is true to a point, and we can debate endlessly about RAID types and their effects on performance and how their buffering makes [url http://www.baarf.com/] useless BAARF. But the real debate is, where is the point that you should use separate to redo and data devices? In the real world, we often receive a standard hardware configuration, which works very well until it's not. A disk or controller will puff in a RAID-5 can happen "is not" real quick.

  You should probably take two thoughts:

  The docs are pretty General, and some old tips do not apply, may have transformed into myth or perhaps too general to be meaningful.

  There is always something in the db, and the more things underway, less you can make generalizations about the serialization.

• Method for patching only host ESXi4.1 and VC is on the same host

  Hello people,

  I'm patching one of the ESXi, 4.1.0 348481 and Vcenter Server 4.1 Update1 (VM) is sitting on the same host ESXi. Please let me know how I can this patch

  a single host as the Vcenter also will restart. I'm looking to patch manually rather than Update Manager. How patch manually the ESXi host as there is no rounds in ESXi and what serves the Cli. If his VCLI then what is the command for the application of patches and download link. I'm looking to get the procedure. Any help on this

  will be well appreciated.

  Thank you

  vmguy

  If you have another host, you can vMotion your VM vCenter to it, then use AUVS to patch.  If a stand-alone host, then you will need to turn off vCenter and all the guests and try the method below

  http://communities.VMware.com/people/vmroyale/blog/2010/12/27/single-use-vihostupdate-how-to-for-ESXi-4x

• I made my largest site and how can keep the same size for all other sites?

  I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• I tried to acivate the code to get the license for photoshop cs6 extended student and teacher edition for mac and it says that the code has not been activated

  I tried to acivate the code to get the license for photoshop cs6 extended student and teacher edition for mac and it says that the code has not been activated. Am I missing a step?

  Using redemption code

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• Tent for 3 days of bridge to work. I was told it could read cache - tired everything including deleting and reloading - still getting the same message. PL; help ease that I am on a deadline. Bob

  Cannot read the bridge cache

  Tent for 3 days of bridge to work. I was told it could read cache - tired everything including deleting and reloading - still getting the same message. Computer restarted several times as well. Please help me I'm on a deadline. Bob

  Let me guess: you're under Windows?

  Have you tried a different cache folder location? Because Windows can limit the bridge to access the folder that you have now.

• Load of Lightroom for Mac and Windows PC using the same serial number

  Would I be able to load lightroom for my MAc and Windows PCs using the same serial number?

  Yes (if you have purchased the full version).

  Thank you

  Nikhil

• I lose half my usernames registered whenever Firefox closes and they are always the same!

  The names of registered users who disappear are all of the type "https".

  Firefox is not even asking if I want to save the user name and password.

  Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?
  
  If the latter is the case then you have a problem with the cookies that are not maintained or the file that stores the cookies is corrupted.

  • Websites to remember you and automatically log you in are stored in a cookie.
  • You need a cookie exception allow (Tools > Options > privacy > Cookies: Exceptions) to keep this cookie, especially for secure Web sites and if we let the cookies expire when Firefox closes
  • Make sure that you do not remove the navigation, search and download history on Firefox to clear 'Cookies' and 'Site preferences.
  • http://KB.mozillazine.org/Websites_report_cookies_are_disabled
  • http://KB.mozillazine.org/Password_Manager

• my Start menu keeps popping up without touching I thought I had a virus so I reformatted and its still doing the same thing

  its all in the title

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• esxi Network Setup 4 and esxi 5.5 the same

  Hello

  We have a customer with the following network configuration (see picture). They run ESXi and vCenter 4.0.

  We have added a new separate system with ESXi and vCenter 5.5 and to set up the network, the same.

  My question is this service console, I can't to be able to set this up, it's that are not part of ESXi 5.5?

  If you see the other image, I configured 2 one for management and one for vMotion VMkernel Port, they will be on the same network.

  Would that be correct?

  I don't mind not the network adapters are not connected again... and another thing must use active active alle 4 cards?

  Old configuration

  

  New configuration

  

  Since the release of vSphere 5, he didn't there no Service Console more... the management can be performed via VMkernel port with active management traffic.

  About vmnic design, my recommendation is:

  vSwitch0:

  For vMotion PortGroup - vmnic0 Active and standby vmnic3

  PortGroup management - vmnic3 Active and standby vmnic0

  vSwitch1:

  PortGroup for VMS - vmnic1 Active and active vmnic2

• I have a doubt... the two Firefox syn account and firefox support account are the same or not

  I have a doubt... Firefox and firefox syn account for both are the same or not change support

  Hello shivarajnaidu, not for the moment these two accounts are completely separate, although it is planned to link the two of them on behalf of persona in the foreseeable future: https://login.persona.org/about