VerifyError: Error #1014 (not found class)

Similar Questions

• VerifyError: Error #1014: class qnx.pps::PPSChannel not found.

  Hi all

  Recently, I worked on a Swipe_Down menu for an app that I'm building for the PB.  At this point, I have to explain that without the prior support of Zezeke and Jtegen, I would have probably less hair that I already do!

  Its also worth mentioning, I'm NOT a programmer and am embark on what interested me much.

  Ok!  I now have zero errors in my application and can build very successfully and transfer it to my PB.  But the menu slide down does not work, I then went into debugging and this is the error I get.

  VerifyError: Error #1014: class qnx.pps:PSChannel could not be found.

  in stock / ___stock_Application1_creationComplete ([F:\projects\stock\src\stock.mxml:6])

  at flash.events::EventDispatcher/dispatchEventFunction()

  at flash.events::EventDispatcher/dispatchEvent()

  at mx.core::UIComponent/dispatchEvent() [E:\dev\4.y\frameworks\projects\framework\src\mx\core\UIComponent.as:13152]

  to mx.core::UIComponent / set initialized() [E:\dev\4.y\frameworks\projects\framework\src\mx\core\UIComponent.as:1818]

  at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\4.y\frameworks\projects\framework\src\mx\managers\LayoutManager.as:842]

  at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\4.y\frameworks\projects\framework\src\mx\managers\LayoutManager.as:1180]

  Simplyput, this would be probably more clear to me if it was written in Zulu!

  Please can someone shed some light on how I overcame this and get the menu appears on the PB?

  Thank you very much

  Bob

  I do not know MXML, I use pure AS3. You have a method that creates a menu, but this method is not be called anywhere if I see correctly.

• VerifyError: Error #1014: class flashx.textLayout.container::TextContainerManager not found

  Hi all

  I'm trying to use TLF 3.0 in my Flex 4.5.1 project. I add the textLayout.swc as a library and I remove the textLayout.swc in the SDK in the 'Library Path' of Flash Builder.

  The link type is "merged into code".

  But when I run my application to spark, I received the following message:

  "VerifyError: Error #1014: the flashx.textLayout.container::TextContainerManager class is not found."

  I have no preloader, my project is compiled with Flash 10.2 (required by the SDK Flex 4.5.1

  What I am doing wrong?

  Thanks in advance for your help

  You have two choices:

  1. replace swc in the folder sdk 3.0 swc.

  2. do as what you said above. But in addition, you must modify flex - config.xml to get rid of the configurations TextLayout.swc.

  Choice 1 is simple and recommended.

  Please take a look at the discussion thread http://forums.adobe.com/thread/851475. (See this thread from the bottom up, because discussions on top are another topic.)

• VerifyError: Error #1014: class flash. media::MicrophoneEnhancedOptions is not found.

  Hello

  With the help of adobe there are many talk FAC and taste for FAC codes.

  I downloaded the flex 4.5 sdk, AIR SDK 2.6, which are more recent built. Installed Flash player 10.3 and AIR runtime 2.7 release candidate.

  Using the following code for the supression of the echo:

  var mic:Microphone = Microphone.getEnhancedMicrophone ();
  MIC = Microphone.getEnhancedMicrophone (0);
  var options: MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
  options.mode = MicrophoneEnhancedMode.FULL_DUPLEX;
  options.autoGain = false;
  options.echoPath = 128;
  options.nonLinearProcessing = true;
  mic.enhancedOptions = options;

  the following error occurs also in version Web, but also the version of AIR.

  I have included the playerglobal.swc in the version of applications in the frameworks\libs\player\10.3 folder

  In both cases it gives the following error:

  ***********************************************************************************

  [SWF] AudioChatClient_1.swf - 2 683 701 bytes after decompression

  typecheck AudioChatClient_1 / startPubishing)
  outer-scope = [global object$ flash. events::EventDispatcher$ flash. display::DisplayObject$ flash. display::InteractiveObject$ flash. display::DisplayObjectContainer$ flash. display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ AudioChatClient_1$]
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {} ()
  0:debugfile 'D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src; AudioChatClient_1.mxml ".
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {} ()
  2:debugline 54
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {} ()
  4:getlocal0
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {} (AudioChatClient_1 ~ [O])
  5:PushScope
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {AudioChatClient_1 ~ [O]} ()
  6:pushnull
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {AudioChatClient_1 ~ [O]} (null [O])
  7: force flash. media::Microphone
  [AudioChatClient_1 ~ [O] * [A] * [[A]] {AudioChatClient_1 ~ [O]} (flash. media::Microphone [O])
  9:setlocal1
  [AudioChatClient_1 ~ flash. media::Microphone [O [O]] * [[A]] {AudioChatClient_1 ~ [O]} ()
  10:pushnull
  [AudioChatClient_1 ~ flash. media::Microphone [O [O]] * [[A]] {AudioChatClient_1 ~ [O]} (null [O])
  11: flash. media::MicrophoneEnhancedOptions force
  VerifyError: Error #1014: class flash. media::MicrophoneEnhancedOptions is not found.
  
  to AudioChatClient_1 / __pub_btn_click () [D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src\Audi oChatClient_1.mxml:144]
  

  ***************************************************************************************
  

  My terms of reference are:

  OS: Microsoft Windows XP SP3

  Intel Core 2 duo processor with 2 GB of RAM

  Flash Builder 4.0

  If possible could you provide information of AIR 2.7 SDK

  Thank you

  Sekhar Rana kamareddine

  Thank you Eli

  Project > properties > additional compiler arguments

  -swf-version = 12

  Really saved my request.

• Modules of sample in OPA 10.4.2 - error 404 - not found

  Hello
  
  I just installed 10.4.2 OPA but was not able to load the rulebases sample included in the package. I just copied everything compiled rulebases (* .zip) of C:\V35235-01\examples\rulebases\compiled to C:\OPA\web-determinations\web-determinations\WEB-INF\classes\rulebases then re-packed folder web-determinations to create web - determinations.war then deployed to Weblogic. When I tested the site web-determinations, I get "Error 404 - not found". Here are the sites I've tried.
  
  Directly from the deployment of the Weblogic Console test tab - http://localhost:7001 / web-determinations
  New IE browser - http://localhost:7001 / web-determinations/startsession/BenefitCodeExample/en
  
  However, I was able to open the BenefitCodeExample page when I accessed the OPM. I opened the project, and then click 'Build and Run' via Web-determinations.
  
  Can you please help me with this problem? I don't know if I'm doing good how to deploy the rulebases. If this isn't the case, please let me know the right way. Thank you!
  
  Kind regards
  
  Ann

  Are you sure that you create the war file correctly? you will need to zip the contents of the directory of web-determinations and not the directory itself, try to open your file. War and the file war comes with WinZip and compare the content.

• BindingExpression path error: 'Orientation' not found 'object' property "ColorScale'

  Hi all

  A data binding error is thrown by the Debug Output window just after setting the DataSource property to certain data :

  System.Windows.Data error: 40: BindingExpression path error: 'Orientation' not found 'object' property "ColorScale '(HashCode = 50862316)'. BindingExpressionath = direction; DataItem = "ColorScale' (HashCode = 50862316); Target element is 'DependencyPropertyListener' (HashCode = 6239444); target property is 'Target' (type 'Object')

  I did the following:

  Graph graphic = new Graph();
  
  Graph Plots.Add (new Plot());
  
  Graph plots [0]. Renderer = new IntensityPlotRenderer();
  
  (Graph (IntensityPlotRenderer). Parcels [0]. Rendering engine). ColorScale = new ColorScale();
  
  Graph DataSource = new list();

  The error message is raised right after the execution of the assignment of a new list of the data source. The error seems harmless but it would be nice to understand what is causing this problem.

  Thank you.

  Hi, gabe0

  It seems that this error occurs because the chart control is to look at his collection of scales to determine if scale orientation changes took place, but the ColorScale does not have a direction property. While you can't do anything to your program to work around this error, you can safely ignore it. I filed a bug for this behavior report.

  Thanks for the comments!

• How to fix error: "application not found" for C:\Windows\system32\rundll32.exe _

  I had the virus ' Vista Internet Security 2010 "deleted using McAfee, but now I can't start my programs and browsers because I see the error:"application not found"for C:\Windows\system32\rundll32.exe" ".
  How can I fix this problem? I use Vista SP2

  Your computer is still infected. Only McAfee will take care about that. First run .exe from Doug Knox fix:

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the instructions here:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010 MS - MVP - Elephant Boy computers - don't panic!

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error-Application not found

  I had a false alarm microsoft virus/troj or something on the computer.  Scanned with Norton and the virus has been removed, but now whenever I click on most of the applications: itunes, word, excell - it gives me the error-application not found.  I can round about still happen to these applications using recent documents, but when I click on the shortcut on the desktop or the start menu, the error message appears.  What should I do?

  First download and run this tool. Make sure you get the freeware version.

  Malwarebytes Anti-Malware
  http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

  Restart when you remove all infected items.

  Bruce Hagen ~ MS - MVP [Mail]

• Vista service pack 2 error code 80092004__run updated stand-alone responsible package__down ServicePack 2__run stand-alone service pack 2___ error code not found crypt_E_ (0 x 80092004) __could the log file is not open

  Service pack 2 80092004 Vista error code
  Run the stand-alone update package
  Load service pack 2
  run stand-alone service pack 2
  error code not found crypt_E_ (0 x 80092004)
  could not open log file

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error "Audio not found" every 5 seconds

  Hello

  I use Adobe Premiere Pro (CC 2015) to edit the behind the scenes of a movie, but I can't edit correctly because whenever I hit

  space to see a preview of what is in my calendar, it works for 5 seconds (or the better 8 seconds) and then it shows an error "audio not found."

  and there is a loss of images.

  I have only two audio files in my sequence, one of them suddenly stops and the error of "audio not found" appears, the other audio file

  continues to play for about 2 seconds and then stops as well.

  I can't find a solution and I have to finish this project quickly, so I can burn everything on DVD.

  Does anyone have a solution?

  Thanks (and sorry for the bad English)

  Hi John,.

  I have an I7 mounting and the film's 1080 p 23 976 fps mov of a T3i, jpeg photos and his (wav).

  After a few days, he started working properly again. I don't know what caused it.

• MAF: Build Error "adfmf - not found feature.xml.

  Hi all

  Anyone know how to change the ViewController.jpr file?  After the upgrade to the MAF (JDev 12.1.3) and the migration of my existing Mobile ADF codeset, I have a build error: "adfmf - not found feature.xml.  The project is looking for the feature.xml file - adfmf.  However the MAF migration script has renamed this file feature.xml - MAF.

  Can I modify the ViewController.jpr script to look for the new MAF - feature.xml myself?  When I opened the project .jpr file in a text editor I don't find any reference to the MAF - feature.xml or adfmf - feature.xml.

  Thanks for the tips,

  TreeStrepek

  * Note: I initially thought that rename the MAF - feature.xml to adfmf - feature.xml solve the problem temporarily.  However, after that I get an error of deployment "doesn't have the profile to deploy, because the 'ViewController.jpr' project is not a MAF ApplicationController or ViewController project.» (oracle.adfmf.framework.dt.features.deployers.FeatureArchiveDeployer)

  I think it was a side effect of the original version of the MAF, which turned out to be unstable.  This has been corrected in the patch below MAF.

  Mobile application framework JDeveloper Patch

  2.0.0.0.41.140623.0901

  Patch 18030351 - patches the main components of JDeveloper required for Mobile Application Framework (MAF).

• NDMP server reported a general error (name not found?)

  Dear all,

  Oracle Secure Backup, I want to restore to the other way, but I got the error

  NDMP server reported a general error (name not found?)

  # State failed to 2013/09/16.15:45 - NDMP server reported a general error (name not found?) #.

  Thanks for your response

  OK, when you put it in the alternative path for restoration, you must list the name of the file too. You can see the original path on the left which includes the name of the file, so your other path should be something like ' / export/res_from_tap/thisfileisrestored.

  Thank you

  Rich

• OBIEE11g Mobile App Designer with error 404 - not found

  Hi all

  Please visit this link OBIEE11g Mobile App Designer

  Rittman Mead Consulting & amp; raquo; Blog Archive & amp; raquo; A first look at the OBIEE11g Mobile App Designer

  Based on this blog, we applied

  16556157 (OBIEE 11.1.1.7.1 group of hotfixes, which also requires to download another patch, 16569379)

  • 17004920, that enable the Mobile App Designer BI support in the catalog and the presentation service user interface
  • 17220944, the BI Mobile App Designer real application, thanks to the extension of the field of OBIEE WebLogic

  Patches on our server.

  has obtained the option Mobile App in the BI Home page.

  while trying to access the following error is Mobile application

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent. If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

  Environment: Windows 2008 (64-bit), OBIEE 11.1.1.7.1

  Please me tips

  Thank you

  Hello

  I was facing the same error after installing the patches for (application Mobile Designer) and restarts as all OBIEE components as well as the server,

  nothing worked except the same error 404 for the last two days.

  so, here the path to get the fixed number advances now.

  1: check the patches applied to the Mobile application designer

  2: follow the blog step by step for the process to be completed.

  Installation Mobile App Designer OLIVIER | OBIEE by Shiva Molabanti

  3: after the patches and the theOBI Mobile App Designer (MAD) deployment manually apply to aid configuration WebLogic the rebound of all services on the OBI (all components)

  4: execution of the Configuration of security as described in the blog. It wil gives error if the console service is not started because it expects for port 7001 WebLogic

  5: after the success of the security configuration reboot all components bi on the side of the OBI and wiat for all future services

  now, I logged in and click on new Mobile app, it worked as expected and it solved the problem.

  Thank you

  BSK

• Error 404-not found? Although services are upward and the gaze of password security very well.

  Installed Enterprise Edition on the server, error 404-not found? Although services are upward and the gaze of password security very well.

  Thanks in advance,

  What URL are you trying to access?

  for em-->http://localhost:7001 / em

  to get answers-->http://localhost:9704 / Analytics

  Unless you change them.