Very slow call JSX with major variables

Similar Questions

• very slow 5 GHz with router R7000

  Hello

  I use the R7000 router at my house for some time. Since the beginning of the speed on the 5 GHz band has been very slow. First I thougt it might be a problem with my Iphone, but now I see that Iphone, Ipad and my laptop have severe speed restrictions when you use the 5 g network. With the 2.4, I get download aof 8Mbit, with 5 g speeds no thant more than 1 Mhz.

  Any suggestions? I always used the current firmware, but sees no difference. There is not other 5 GHz networks in the House (I've already checked).

  Thank you

  Christine

  Others have had problems with channels 5 GHz with the version of the firmware you have, they seem to have luck in fact revert to the previous version, 1.0.4.28. You can get it here downloadcenter.netgear.com/en/product/R7000

  A beta firmware is available, you can find the info here https://community.netgear.com/t5/Nighthawk-WiFi-Routers/R7000-firmware-v1-0-5-44-limited-release/m-p...

• Bridge is very slow on iMac with El Capitan, using 75% less than the 32 GB of RAM.

  I have a new iMac 27 inch Retina 5 K (end of 2015) 3.2 GHz with 32 GB of RAM and bridge is now used in the region of 20-25 GB + of it on a regular basis. My previous iMac 24 inch (end of 2009), with 'only' 8 GB of RAM, ran faster and the RAM usage was less than 45%. While Bridge works very slowly - much slower than my old iMac - and I can't work out why.

  I compacted and emptied the cache, reduced the number of images in each folder and reduced the size of the preview, but nothing seems to make any difference. I forgot something or are my expectations too high? The bridge is my main tool with Camera RAW/Photoshop before importing all the files in Lightroom and speed reduction is initially serious workflow problems.

  Someone a suggestions please?

  Hello

  Greetings!

  See this article: https://forums.adobe.com/docs/DOC-6301

  Concerning

  Jitendra

• Anyone else having VERY slow download/connection with 31.5.0? CAUSE: unknown, problem cleared up by itself

  TB itself updated 31.5.0 last night. This morning, it just had a rotation display to the top of the tab of the Inbox that she tried of to connect/download of Gmail (he connected/downloaded from Yahoo and Comcast). Finally released after about 10 minutes and showed me some message headers. But after selecting all messages, it only shows not the content (unless it's one that I saw previously) - it just says: 'Loading Message... '. "for awhile, then this message goes away, then later (several minutes) shows the content of the message.

  Start * Windows * safe mode with active network
  -win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
  -win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?

• A1396 iPad2 very slow 64 GB with 9.1 - should I upgrade to 9.3.1?

  Hey guys, I have an ipad 2 A1396 64 GB. I have almost 30 GB of free space, however lately my ipad is really slow.

  Should I upgrade to 9.3.1? This will make it faster? Is there anything I can do for my lucky ipad? a program to set or change?

  Thanks in advance...

  Each update, apple publishes intends to improve performance and efficiency to provide a better experience for their consumers, so in my opinion the upgrade would be better now to improve the performance my advice would be to close the applications that you do not use and restart from time to time to clear the immediate memory.

• Satellite M45-S169 is very slow

  Hello

  I really hope that someone can give me a notice here...
  Recently, my laptop started to work very slowly. I was using Windows Movie Maker to create projects and she began to hang and not save the project... The use of the CP was 100% and the system ran out of memory quickly... Files with avi, wma, jpg files did not open at all and windows Explorer hanging just whenever I tried to open a. He had more than 20 GB of free space on system C drive and about 8 GB of local disk D... In addition, the copy process has just stopped working properly... It took a long time to copy even small files from one place to another... I am not connected to the network, so this isn't the issue...

  I have reinstalled the operating system (Windows XP SP2)... Files with extensions of different media now open... Although not very quickly. But the copy process takes much longer to finish... It is also very slow browsing photos with Windows picture and Fax Viewer.

  If sth wrong with the material from the laptop or the absence of some drivers could cause problems? What and how can I check this? I've had this laptop for 2 years now...
  I'm not very good with PC equipment and do not know what might not work... I greatly appreciate your help... Really need help here...

  Thank you very much

  Hello

  I found two forum threads useful on HDD repair tools:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=33738菊
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=69562𐾺

  Maybe it s an option for you

• Recent problem with very slow internet browsing on all browsers Windows Vista Home Premium 32 bit

  Separated from this thread.

  Hi all I'm having the same issues as Theresa in the thread above split. I have Vista Home Premium 32 bit service Pack 2 with all the installed updates (automatically done!).  Within 3 months, this PC at home that was formerly an excellent navigation device became very slow when you browse using IE, Firefox or Chrome. It takes 30 to 50 seconds to load any web page (Yahoo, eBay, etc.). I followed all the instructions suggested to Theresa in SafeMode by Bill Smithers. Resulted in nothing other than a few cookies and Wetherbug I killed. I also run McAfee total protection and Spybot S & D every 3 days with nothing found.

  I have reset my browsers to the specifications of the factory without change.

  Comcast is my internet provider high speed and my speedtest returns 65 - 75 MB/s download and 11 Mbit/s upload very regularly. I connect directly to the bridge. I had Comcast out and they swapped unity Arris of a unit of Cisco beefier but that changes nothing. Other devices on my network domestic perform very well and do not have this problem.

  When I browse a site the CPU spikes up to 88% use in 45 seconds and is stable at 50% usage 1.7 GB memory.

  The only thing I can infer is at this time that something happened to the operating system during automatic updates or some other setting has been changed.  I could use any help or suggestions you may have! Otherwise, I love this OS and have not had any problems. Thanks, Dhoffa

  Tune Up

  Internet Explorer

   

  To improve performance for IE, you can reset internet Explorer to the factory settings. This will disable memory addons chewing and bar tools, etc. that you've installed over time.

  In Internet Explorer click on Tools in the bar and then Internet Optionscommand. Go to the Advanced tab, and then click the Reset button.
   
   
  Or disable/remove specific ones, in Internet Explorer click on Tools for button on the command bar - Manage the Addons - enable or disable Addons - select the addin - Remove or disable the button.
   
   
  There's a Fixit
   

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

   

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

   
  Other memory hogs
   
   
  You probably many useless auto startup programs. You can disable these programs.
   
   
  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Then go to the Startup tab uncheck the things you don't need.
   
  Use the command line column to find info on the file, if it does not use display menu - Select the columnsdisplay. Use the name of the folder that contains the file and right click - Properties - Details tab to see what it is.
   

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

   
  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close the windows explore
  • Start Autoruns by right-clicking and choose Run as administrator
  • Click on the Options menu - entries and Filter Options to hide Microsoft tick and clear to understand empty slots
  • Go to the explore tab and uncheck everything to the left.
  • Reset
   

  Difficulty of the Windows system to the performance issues on Windows computers slow Fixit

  Automatically troubleshoot and fix problems of Windows performance. Enhance, optimize and speed up Windows computers and make slow PC faster.

   

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  --

• Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

  I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
  Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
  I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
  I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

  Hey ArnisR,

  I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

  The problem is caused by the last (HP) ISO (from March);

  -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

  -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

  I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

  The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

  Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

  I hope this helps!

• Computer is very slow with El Capitan

  After the recent upgrade to El captain, my Macbook pro (13-inch, mid 2012) became very slow.

  Starting, restarting, Safari, open programs... Wheel of Rainbow all the time.

  If someone could help, I would be very much appreciated!

  Thank you!

  My Etrecheck results:

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-20 19:59:32

  Download EtreCheck from https://etrecheck.com

  Time 04:09

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.9 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 667

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 749,30 (Go 140.30 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - Count: 17

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Application Support/PeerGuardian

  xxx.qnation.PeerGuardian [no charge] (1.1.13 - SDK 10.8 - 2015-10-28) [Support]

  / System/Library/Extensions

  com.Wacom.kext.wacomtablet [no charge] (6.3.8 Wacom tablet - 2 - SDK 10.9-2016-09-20) [Support]

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 168 jobs

  tasks of Apple 64 [performance]

  Launch system demons: ⓘ

  [no charge] 48 Apple jobs

  [loading] Apple 165 jobs

  [running] Apple 77 jobs

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-09-16) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2013-01-11) [Support]

  [cannot] com.extensis.FMCore.plist (2016-09-06) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-08-13) [Support]

  com.Wacom.wacomtablet.plist [running] (2014-03-31) [Support]

  Launch demons: ⓘ

  [loaded] com.adobe.SwitchBoard.plist (2016-09-16) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (08 / 08/2013) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-09-16) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2015-12-28) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-08-13) [Support]

  [loading] com.rogueamoeba.instanton - agent.plist (2014-03-25) [Support]

  [loading] xxx.qnation.PeerGuardian.locum.plist (2015-10-28) [Support]

  User launch officers: ⓘ

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-09-20)

  [loading] com.spotify.webhelper.plist (2015-06-08) [Support]

  Items in user login: ⓘ

  Application of hidden caffeine (/ Applications/Caffeine.app)

  Suitcase Fusion 6 hidden Application (/ Applications/Suitcase Fusion 6.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-28) [Support]

  Default browser: 601 - SDK 10.11 (2016-09-17)

  Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-06-07) [Support]

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2014-03-31) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-09-16) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  Silverlight: 5.1.20513.0 - SDK 10.6 (2016-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-17)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

  AdobePDFViewer: 10.1.1 (2016-09-16) [Support]

  JavaAppletPlugin: Java 8 updated 66 17 (2016-09-16) check the version of build

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Flip4Mac WMV (2013-03-29) [Support]

  Growl (2016-09-16) [Support]

  Java (2016-09-16) [Support]

  WacomTablet (2016-09-16) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  kernel_task 2%

  0% aslmanager

  0% fontd

  0% AddressBookSourceSync

  Top of page process of memory: ⓘ

  573 MB kernel_task

  Com.apple.WebKit.WebContent (9) 369 MB

  66 MB WindowServer

  Safari of 57 MB

  49MO softwareupdated

  Virtual memory information: ⓘ

  5.37 GB of free RAM

  used 2.63 GB RAM (2.02 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  Sep 20, 2016, 19:52:05 Self test - passed

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-183021_[redacted].crash 18:30:21

  / Applications/Suitcase Fusion 6.app/Contents/Resources/FMCore

  Sep 20, 2016, 06:24:44 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-09-20-182444_ [redacted]. Crash

  com.wacom.WacomTabletDriver - Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-181728_[redacted].crash 18:17:28

  First uninstall CleanMyMac3. It is not necessary and can ask questions.

• Very slow even with instances.

  Hi all, I am trying to compress a bunch of my own videos to save space. I have the compressor 4.2.2 on El Capitan 10.11.5, latest version of the software. My specs are:

  iMac 5K end 2015

  4 GHz Quad Core i7, hyper threaded to 8 logical cores

  32 GB of RAM

  AMD Radeon R9 M395X 4096 MB

  I export source H.264 in MPEG-4 h.264. I'm very slow sometimes, and this becomes even slower when I add an instance. Also, I edited the .plist preference file for the compressor and added more cases that I have been authorized by default because it was not maxing out my CPU. If I have 1 instance (as the compressor allows me) or 4 instances (which uses 90% of my CPU in the activity monitor), it seems much slower than the single instance. Why? My iMac is the most high-end model and a 8 logical cores, how is it unless its slow export when I use more instances? Its already very slow with just a single instance. How to speed this up?

  The Mac Pro is the most high-end model.  When transcoding to H.264 format, use not all instances.  The CPU has a built-in H.264 encoder that uses the compressor.  So bodies indicates compressor to ignore that and just do it via the encoding only software.  The speed you get is the speed you get.  Without knowing the length of your videos, what are their original format and the codex, or how long they take, I have no way of knowing if your Mac is slow or if you expect too much of him.  This information would be useful.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Satellite C660 with Windows 8.1 is very slow

  I have upgraded from windows 7 to 8.1 and it was very slow, the drive is still in the use of 100.
  When I had Windows 7 I've never had the slow computer.

  An entry is written on your tasks en segundo plano Protección screenshot
  Its tasks in the background Windows protection srtasks.exe
  This process starts automatically and should not cause performance problems.

  However, in case you have problems with this exe file, I recommend checking the system of possible virus and malware.
  Sometimes viruses are very similar to the standard windows processes a likely to affect the performance of the system as well as functionality.

• Firefox 5.0 startup is very slow with error message before continuing

  Since the loading of version 5.0, Firefox is very slow to start, and this message until he could continue:
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

  "Script: chrome://tavgp/content/libs/include.js:595.
  The only way to continue is to STOP SCRIPT

  The problem is AVG Safe search and AVG Security Toolbar

  • Problematic extensions - MozillaZine Knowledge Base
    Provides instructions for removing AVG link scanner component - to-beyond to simply disable extension
    http://KB.mozillazine.org/Problematic_extensions

  Similar questions:

  • error chrome://tavgp/content/libs/include.js:595 | Firefox Support Forum | Firefox help
    https://support.Mozilla.com/en-us/questions/787703
  • I get this problem of script is not responding - Script: chrome://tavgp/content/libs/include.js:595 | Firefox Support Forum | Firefox help
    https://support.Mozilla.com/en-us/questions/761982
  • Script: chrome://tavgp/content/avg/avgtbapi.js:125 CE WHO IS WRONG WITH GOOGLE what IT Can t DIFFICULTY THESE BORING 'SCRIPTS?' - Gmail Help
    http://www.Google.com/support/forum/p/Gmail/thread?TID=771813b789154afa & hl = in

  Articles (General information on the message)

  • Script warning unresponsive - MozillaZine Knowledge Base
    http://KB.mozillazine.org/Unresponsive_Script_Warning
  • WARNING unresponsive script | Troubleshooting | Firefox help
    https://support.Mozilla.com/en-us/KB/warning%20Unresponsive%20script?s=script+busy+responding+extension & As = s

• Typing becomes very slow in Firefox 3.6.11 in Mode safe mode with all extensions and plugins disabled.

  When I first start Firefox, all right. And everything is fine as long as I type in the text boxes on any web page. I can type in the address bar or search throughout the day with no problems.

  But, for example, just by typing in the edit box to ask this question on this site will result in the problem after I typed more say 150 characters. After this strike ANYWHERE in Firefox will be very slow, even the address bar or the search bar. It doesn't seem to matter what site use to type in the text. Cause the problem to occur after typing in enough strikes.

  Navigation & mouse clicking remains fast - it is only typing seems to be affected. In order to recover, I have to restart Firefox.

  If I look at the use of the UC Firefox.exe in Process Explorer, I see that once the problem occurs, the CPU usage starts whenever I type a key fortification. Indeed Firefox maxes one of my two hearts so the cpu is at 50%! He goes down to 0% again once I stop typing.

  As mentioned in the subject, it is in Mode safe mode with all extensions & plugins disabled. I'm running on Windows XP SP3 with an old AMD Athlon 64 X 2 Dual Core Processor 3800 + (1.81 Ghz) with 2.00 GB of RAM.

  I think it started to happen with Firefox 3.6 significantly (it's amazing how much time I can navigate without having to type), but it sometimes occurred with previous versions. Now he is annoyingly repeatable.

  I have to use '-no - Pei ForTyping distance "to start a separate session of Firefox that I use just to type in the text boxes, so I can restart at will. I also compose messages in an external editor and simply paste in Firefox to avoid typing as much as possible.

  This may be a problem with session restore. Firefox stores session data every 10 seconds to make it possible to restore a session crashed.

  It may be a problem with the sessionstore.js file in the profile folder

  Delete the sessionstore.js and sessionstore.bak and all files files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js.

  See http://kb.mozillazine.org/Session_Restore

• Equium A60 very slow with Windows XP SP 2

  This Toshiba unit very boots very slow, it takes forever to get started it got a software firewall installed but it is not correct that it really takes ages to boot up a laptop like this. I have searced for a few updates here, but I have not really found something. Is there a known issue with windows xp and sp 2 for this laptop?

  Do you have any adviecs?

  Concerning
  Matts

  Hello

  I had the similar problem with my Satellite P10. After installation of SP2, the startup procedure takes much longer. Check please the processes that start to run and disable some of them if you n t need them.

  Have you installed SP2 or it is also to the recovery image?

  In my opinion, it is not specific for certain just usual laptop models. My second unit (without SP2) starts a lot faster.