Video end with the last image

Similar Questions

• How to end the movie with the last image?

  Hi all

  Can someone tell me how I can get the last image to congeal, so

  that the video does not go to black?

  Thank you

  Shaul

  If you expand the end of the timeline and move the end of the rear bar of a frame work area, and then export the work area, you should finish on a Blackboard rather empty first frame.

• Video ends on the first image

  Hello
  
  I have imported a video as a flv and when I play the file ends showing the first frame of the video. How can I get it play and end, and the last picture show.
  Thanks in advance!

  automatic rewind Set false

  To do this, click on the component and open the components Inspector, search field auto rewind and set it to false

• Stabilizing warp CS6 scales down to the last image

  Hey,.

  Whenever I have add the Warp in Premiere Pro CS6 stabilizer, it auto-echelles of sequences, with the exception of the last image. It changes just to 100% once again, so I'll have to cut. Others affected by this problem, or of the ways to solve it?

  Thanks in advance.

  Edit: turns out it's probably not the stabilizer of the chain, but the position. When I set the position, the same thing happens, and as the stabilizer changes the position, the position will probably cause the problem. Key frames is disabled.

  Come discover something new, which makes it even more strange.

  The last shot of the clip using the effects on the other. I have classified the next clip completely red, just to check. And the last frame of the previous clip flushed as well. In addition, when a clip is not stabilized, it will say: 'click Anylize', with the exception of the last image.

  It seems to me that, instead of problems with the last image, it is probably the first frame of the next clip which is missing. So what is happening: the previous clip using the effects applied to the next item. I never came across something like this.

  Edit

  RESOLVED:

  Somehow, on each unique clip, the creation of keyframes for opacity is enabled. But there is no keyframes, and it is always 100%. When I change the value and go up 100%, the missing frame returns.

• Stop on the last image: Video Glitch

  I think that I just discovered a small problem with the help of Stop on the last image for videos. I have the video 1024 x 768 auto parts and together the current image and stop on the last image. The video plays well and stops on the last image, but if you drag down the article we also have integrated video. Once you play the other video and if you scan back up on the first page, you will find the full video frame is recessed it starts setting. I should also mention that I have tested with a link to a video in a URL and if you play the video in the browser it has the same effect. Essentially, it restores your last image in the current image. Does anyone else have this experience or have a work-around to prevent it?

  We have also tried to put a State of the object that would show the last image once the finished video playing, but this disables the ability to exploit and shoot to the top of the Chrome.Thanks!

  The last frame of the video is sure to remain visible while the player is on this page. Once a player has moved away from the page that it can reset as we do memory management, etc. and clean the former State.

  Neil

• VIDEO WITHOUT STOPPING ON THE LAST IMAGE

  Help!  I ticked the box in Folio Builder v26 - "stop on the last image" - but when I saw in Adobe Content Viewer, after playing the video, it is up to the poster frame - which is the first image of my video.  This won't work for what I'm doing at all.

  Can anyone help?

  Thank you!

  Kathie

  When you are previewing are previewing on your desktop or on an iPad?  Stop at the last frame is available through iOS so it does not work on your desk.  But if you have your iPad plugged in to your computer and open it from the ACV on your iPad then you should be able to preview on the device and it should work.  But as I said, this will work only on iOS.

• Videos without stopping on the last image

  I created a folio containing a video. This video needs to stop on the last image, while it is not reset iteself. in the control panel overlays folio I selected the stop"button on the last image. But previews and when the folio is updated, video seems to ignore that and play through and restores at the beginning. Please help, I absolutely need to have the judgment of the video on the last image.

  You have probably created a folio v20. Stop at the last frame was introduced in v22 or v23. Folio properties allows you to update your version of the Viewer, and then try again. (Of course, if you have an older application on the App Store, you'll want to consider.)

• Why the last image of the exported image sequence is sometimes black?

  I get sequences of images in Photoshop and then exporting them to a file mp4 video.  For some reason, Photoshop sometimes decides to put a black frame at the end of the video, no matter what I try settings.  Sometimes it leaves aside the black frame.  I can't understand why he did this.  If anyone knows how to get rid of this?  When I import the resulting sequences first, I need to change all the frames of black.  Not impossible to deal with, but it is kind of a pain.

  Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3200 MHz

  Built-in memory: 8191 MB

  Free memory: 4507 MB

  Memory available to Photoshop: 7154 MB

  Memory used by Photoshop: 70%

  Graphics card: NVIDIA GeForce GTX 470 (with the latest driver Version 347.88)

  Adobe Bridge 6.1.0.116 x 64

  Use, file-> open and checking the box 'Sequence of Image', I am loading a sequence of JPGs I've cropped in Photoshop (using a script to automate this process), and I specify 23.976 fps. I checked all the JPG files, and they are OK. I play the animation in Photoshop, and it looks good.  I then export the movie using the file-> export-> made video, I use Adobe Media Encoder, h.264 format, high quality, 1920 x 1080 (the original document size), 23.976 fps.  It automatically selects the zone selection to export work.  That seems correct.  In a sequence of images of N, it is said that it will export images 0 to N-1, which I think is OK if it indexes starting at 0 and not 1.  I tried to export (frames) checked, and the result is the same.  The last image is black.  I also tried to change the work area to remove the last image and the last frame of the rendered video is so dark, but the last image of the sequence, I opened is missing.  I checked the image sequence that was exported with the area of complete work (or frameworks) selected and all managers are there - with just a framework black, added at the end, which is certainly not in the work area.

  No error message.

  I checked the help, also I tried searching the forums, but I don't know what I'm doing wrong.

  The problem has been around on and off for a few years.  He had disappeared with CC, but now he's back, even though I'm not aware of what I'm doing differently.

• Use the last image as a scene body 1.5 final

  I would use the very last frame of a clip video as an extended scene, 3 or 4 seconds to disappear at the end of a wedding video. There must be a better way than to paste the clip 120 times, but I can't.

  Any help much appreciated.

  David

  Or cut the last image and stretch it with the extensible tool until the desired length.

• Game stop on the last image appears lighter than the last image

  I have a video game to "stop on the last image" by using the technique described here:

  OAR-here http://digitalpublishing.tumblr.com/post/6141054971/How-to-Make-a-Video-stop-at-the-Last-f

  Works very well. But whenever I do that, there is a slight darkening when the multi-state object appears at the end. To create the image of the multi-state objects, I opened the video in Photoshop, caught the last image and saved as a JPEG file.

  Anyone have any ideas? I tried to save the image as a PNG, much other workaround solutions, but the problem persists. I've noticed this in other publications that I downloaded also, so I think that the problem is widespread.

  I found an answer to this problem. I wrote the answer in a post to blog here:

  http://blog.gilbertconsulting.com/2011/09/DPS-stop-video-at-last-frame.html

• a table of images only the last image shows the index

  Hello world

  I try to index a table of images and all, but the last item gives me the error: "not an image."

  Here is a picture of the vi. The first loop load images and stores them in an indexed auto tunnel. Each diagnosis that I fell on this loop showed that all is well. The second loop must display the image stored in the tunnel sequence indexed auto, but it does not work. Instead, I got the error message that the 0 to n - 1 elements are not images, and only the last image is displayed.

  

  What I am doing wrong?

  Thanks for your help.

  and vi:

  Hello

  This VI has worked well for me with a contribution of 5 bmp files. You can check your input files?

• How to play video files with the extension "rar".

  When I download video files with the extension 'rar', I can't play them with Windows Media Player or QuickTime.

  Could someone please advise what I can do to fix this problem?

  Thank you

  Rar is a compressed, identical to zip file. You must decompress, using an application like winzip or winrar, then according to what file type it is you should be able to play. If you cannot, you will find the codec that makes the Elf, install it, and then everything should be fine, but if you have problems, go back with the extension on the end of the file, as you have with the .rar and ask again.

• Camera: Find the last image?

  Hello

  Are there examples of how to find the last image taken after invoking the camera?

  Thank you

  Hi and welcome to the forums!

  If you take the picture and save, and can't find it? Or you take pictures

  Return to the back and you want to know where they are stored as you pull?

  Go to the media and click the photos, as soon as the images are displayed

  Highlight it, click menu, properties. It will show you, device, media and file

  and size.

  You can set the previous directory. Unit > menu button > options.

  Here you can set options for the camera with flash, color, size, and storage in the

  media folders,

  Thank you

  Bifocals

• Load swf to the last image

  Hello

  I have several files SWF is meant to be read in order (like a book). I can load the previous swf file, but I need to go to the last image. Is this possible with the code that I have?

  lastPage2.addEventListener (MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_1);

  Import fl.display.ProLoader;

  var fl_ProLoader_1: ProLoader;

  var fl_ToLoad_1:Boolean = true;

  function fl_ClickToLoadUnloadSWF_1(event:MouseEvent):void

  {

  If (fl_ToLoad_1)

  {

  fl_ProLoader_1 = new ProLoader();

  fl_ProLoader_1.load (new URLRequest ("CEAS_I_1_16.swf"));

  addChild (fl_ProLoader_1);

  }

  on the other

  {

  fl_ProLoader_1.Unload ();

  removeChild (fl_ProLoader_1);

  fl_ProLoader_1 = null;

  }

  fl_ToLoad_3 =! fl_ToLoad_1;

  }

  It doesn't work at all, but I could find another code that you suggested on another thread: go to a specific external swf image

  It worked!

  var loadmod2:Loader;

  lastSection.addEventListener (MouseEvent.CLICK, loadlast);

  function loadlast(e:MouseEvent):void

  {

  {if(!loadmod2)}

  loadmod2 = new Loader();

  loadmod2.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  }

  loadmod2. Load (new URLRequest ("CEAS_I_1_16.swf"));

  }

  function loadCompleteF(e:Event):void {}

  addChild (loadmod2);

  MovieClip (loadmod2.content), .gotoAndPlay (33);

  }

• Videos converted with the conversion software video DAM do not play properl

  Videos converted with the conversion software video DAM do not always play correctly

  and

  
  

  The use of Video Manager to check in an additional file video AVI, by clicking on the "renditions" link at the bottom of the page, a page filled with characters scrambled instead of a video playback in Windows Media Player.

  I have configure the FlipFactory with oracle ECM job ststus form Flipfactory her complicated but when I tried the video from ECM not simply
  

  Thank you all,

  I solved the problems that I update the DCU for last vision of 11... 8...