Video metadata date is incorrect: the value and not of creation date sharing

Similar Questions

• Displaying an Enum value and the name of the element when the values are not sequential

  Hello

  I use Enum and controls indictators successfully with shared and modbus variables.

  For example:

  Name of the element Value

  Off:                0

  Start 1

  On                2

  Œuvres enum Setup, I don't need to look for a cheat sheet to convert the name of the element in its value, I see the name of the item in my order/indicator.

  My new variables, I'm currently managing look like this:

  Name of the element Value

  Code 0 x 201

  Beginning Code 0 x 202

  Code 0 x 001

  Any ideas how I can display the value and the name of the element on a façade. (for a control and indicator)

  For enumerations, it seems that the item values must go 0,1,2,3,4,5

  I found the solution:

  http://digital.NI.com/public.nsf/allkb/79BA4505AE8C755E86256FB2000140B0

  use a ring of text and deselect the sequential box

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• When I send an email or an attachment it happen as the benefits of discovery as the sender and not my name, how can I change this?

  When I send an email or an attachment it happen as the benefits of discovery as the sender and not my name, how can I change this? his strange huh?

  I never stay connected to my email, I actually get hacked somehow I have change my password often enough

  Hi darenlysne,

  It sounds like you have the email account of incorrect installation and hurt the server info.

  Provide the program that you are using and we can go from there, or contact your ISP.

  B Eddie

• Area of the graph under the graph and not next to the chart legend

  Hello
  
  I need to display 1. Graph legend below the graph and not next to the chart area and also reduce the space between the caption box
  2. the values in the chart are affiches.1745%, 4.596%... I need to round up these values.
  
  My card code is:
  
  chart:
  < graph graphType = 'PIE' depthAngle = '50' depthRadius = '8' pieDepth = "30" pieTilt = "20" seriesEffect = "SE_AUTO_GRADIENT" >
  < title text = "Answer category" visible = "true" horizontalAlignment = "CENTER" / >
  (< LocalGridData colCount = rowCount="{count(.//G_DT_NON_NA_EQUITY1) '1'}" > "
  < RowLabels >
  < xsl: xmlns: xsl foreach = "http://www.w3.org/1999/XSL/Transform" select=".//G_DT_NON_NA_EQUITY1" >
  < label >
  < xsl: value-of select = "SPER_STATUS_TXT10" / >
  < / label >
  < / xsl: foreach >
  < / RowLabels >
  < DataValues >
  < xsl: xmlns: xsl foreach = "http://www.w3.org/1999/XSL/Transform" select=".//G_DT_NON_NA_EQUITY1" >
  < RowData >
  < cell >
  < xsl: value-of select = "CNT20" / >
  < / cell >
  < / RowData >
  < / xsl: foreach >
  < / DataValues >
  < / LocalGridData >
  < / chart >
  
  I appreciate all the help
  
  best regards and many thanks
  Bhavana

• Popup do not insert in the table and not refreshing called page...

  Greetings
  
  
  
  Environment: APEX 3.1.1.00.09 on AIX 5.3 with 10 gr 2
  
  
  
  I read a lot of threads about my question and I think I'm getting closer to the answer but in some sort have combined a too big number of suggestions and am tripping over my own code.
  
  
  
  Please look at my sample application on apex.oracle.com:
  
  
  
  Workspace: galway
  
  User: gwicke
  
  Password: gwicke
  
  
  
  Please start by Page3, select any agency and then click on "add a new contract."
  
  There are currently a label "BOLD" < facilities > < strong > 'Add new Builder' which is a link that should open a popup window. Type a name in the field, and then click 'Create Builder'. This should INSERT the row into the table builder, close the pop-up window, assign the new name of the generator to the item page calling "Name Builder" and fill the screen element.
  
  
  
  In current state, the application will open the pop-up, allow entry and close by clicking on the button "create Builder." However, the new constructor is NOT inserted into the table and the calling page element is not met.
  
  
  
  Looking at the Page elements and Session State, I can see the correct values assigned to the elements "Pn_BULDER_NAME" on the popup page (4) and the calling page (2), but the value does not appear on the screen.
  
  
  
  I read here where there really two parallel universes, not forgiveness, Articles of two versions of the screen, a State of Session and the other which is displayed in the browser and there are measures to be taken to be sure that is displayed is updated to state of Session I want in this case.
  
  
  
  I entered the Javascript code on Page4 - header to set the 'passBack2()' function and the code in the section "Option URL Redirect" to the button "Add Builder" if all goes well perform protocol ARP for the INSERT, assign items to page 2 and close the pop-up window. He gets not quite everything.
  
  
  
  Any helpp is greatly appreciated. Thanks to Dene for most of the suggestions I have followed by code.
  
  
  
  -gary

  Hi Gary,.

  I think that there is a very simple solution to this topic - is not this spot really last night.

  First, Yes, you could use a "button" to manage the call for the popup - make sure that the button is a type of URL 'button', which is actually an A tag with the appeal under target URL. Otherwise, you could take you existing a tag and use the same class for one of your buttons attribute because this should make it look like a button.

  More importantly, however, I think we could do as:

  1. on your call popup page 2, clear cache for page 4 (the popup page) - I already did in your application by updating the url

  2. on page popup, allow the user to enter their desired P4_BUILDER_NAME value (not sure if you want to do something to make it unique?)

  3 let the user click on create on the shortcut menu. He will submit the page, that will make your P4_BUILDER_RANK (pk) value and insert a new record in the table (you might consider the creation of a sequence and a trigger to handle the creation of new value PK?).

  4 - assuming that the P4_BUILDER_RANK then exist (it would not if there is a mistake somewhere), then conditionally display a region that had a piece of javascript submit page 2 and closes then itself - we don't need to move everything back to page 2 (see below)

  5. as the P4_BUILDER_NAME and the P4_BUILDER_RANK exist in the session, to which page 2 be reloaded, (A) the selection list should be updated with the new generator (still not sure why all my entries appeared downstairs instead of in alphabetical?) and (B) the P2_BUILDER_NAME and the P2_BUILDER_RANK can have Post calculation calculations together (NVL) ((: P4_BUILDER_NAME,: P2_BUILDER_NAME) and NVL (: P4_BUILDER_RANK,: P2_BUILDER_RANK) respectively)-l' effect is, if there are the values stored in the page P4 elements, we use them, otherwise, we use whatever values were in the elements of page P2

  6 - Finally, to stop (5) that happens in all the loading of page 2, you would need to clear the cache of page 4 in as many places as possible - for example, branches for a 2 page or buttons on page 2

  The reason why we cannot pass values back to page 2, it is one of the elements is a list of selection. The value we want to select will appear not on the selection list until the page has been sent. So, we can set the value and submit because the value is not there. We can introduce and define the value, because the javascript don't know when the page has been updated (or, at least, you need an independent mechanism to identify, which can get complicated).

  So, in other words, as long as we know that if the values are in the session, we can use Post calculation calculations to set our fields to these values. The only thing to keep in mind is that we must ensure that these session values only exist when in need - so we empty the cache. This principle should work for any type of terrain - but as you have no doubt seen, simple text fields can be updated by the popup directly as the field must accept any value that we give.

  My only recommendation would be to completely remove the MRU of the page process because they are not necessary (they simply confuse the issue) and you could make your fetch PK and record insert into a single process - just to keep things clean and tidy, you understand!

  When I finished last night with your app, I will leave so that javascript can create an option on the select list, and then set the value. But the method described above seems to be much simpler.

  Andy

• Notification by email to the phone and not headset/Bluetooth Headset

  I have an iPhone6 and whenever my bluetooth headset is connected, my notifications by e-mail through the headset and not via the phone.  I need to call to keep giving me the notification and send it through the headset.  Often, I have my phone and the headset on my desk and will not hear the notification.  I'm pretty sure I could change this once, but can't remember how.

  Maybe you have active AirPlay? Swipe up from the bottom of the screen to display the command center and ensure AirPlay is disabled.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

  Also, go to settings > general > accessibility > routing of Audio calls > and set it to automatic.

• Print only the attachment and not email

  Hello

  Is it possible for me to define the eprint so that it displays only the attachments and not the email too?

  Hello

  I fear the answer is no.

  All content is automatically printed and it cannot be changed.

  You cannot print attached without also printing the email.

  You can find the terms of service listed in the frequently asked questions (FAQ) below:

  http://support.HP.com/us-en/document/c03721293

  Kind regards

  Shlomi

• Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

  Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

  You are confused of RAM and disk space available.

  RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

  The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

  FYI, for your iMac, the maximum RAM is only 6 GB.

• My task manager only to see the task and not, application, process, etc. How can I get it back to normal?

  My task manager only to see the task and not, application, process, etc. How can I get it back to normal?

  If it does not display all the tabs, double-click the external border of the Task Manager.

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Why messages are stuck in the Outbox and NOT sent? Iconia b1. It is online

  Why messages are stuck in the Outbox and NOT sent?  Iconia b1.  It is online

  Are you referring to gmail or stock email app?

  If the stock email app, can be a problem for SMTP server, please check settings/passwords.

• HP Pavilion dv6 1335 TX - Mute button is red all the time and not of sound through computer speakers.

  HP Pavilion dv6 1335 TX - Notebook PC (New Zealand)

  MUTE button is red all the time and not of sound through computer speakers. # LED light is 5 according to the guidelines of the manual for the identification of your component externally.

  Processor Intel Core 2 Duo T6600 CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  Name of the OS Microsoft Windows 8 Preview version

  Version 6.2.8400 Build 8400

  System Type X 86-based PC

  All drivers works normally and have been checked for updates that were not necessary.

  Turn help would be appreciated

  Hello

  Mute key functionality is provided by IDT Audio software, so the problem may be that Windows 8 has installed a reference driver that does not contain.  Often, the Windows 7 version works Ok, so I would try downloading and installing the following driver IDT.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• How can I get casscade toolbar at the top of the screen and not on the side

  taskbar

  How can I get casscade toolbar at the top of the screen and not on the side

  How can I get casscade toolbar at the top of the screen and not on the side

  If you mean that you want the taskbar to be placed at the top of the screen...

  Right-click on the taskbar, don't check that no check mark to 'lock the taskbar '.

  Method 1:

  Left-click in the taskbar and HOLD > drag the taskbar to the top of the screen.

  Method 2:

  Right click on the task bar > click Properties > tab taskbar at the top > in place of the taskbar on the screen, click on the pointer, and then select top > click OK when finished.

• How to create images that react to the size of the browser (and not to the device)?

  How to create images that react to the size of the browser (and not to the device)?

  Hello

  Please try this widget.

  http://widgets-musethemes.BusinessCatalyst.com/tb032.html

  Concerning

  Vivek