View pools recompose problems with applications and printing

Similar Questions

• Problem with Lightroom and printer Epson

  I suddenly have problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5 and have an Epson Stylus R2400 Photo. I use this combination from the beginning without any problem. Now all of a sudden when I try to print I get an error message that says media is released or not loaded properly. Is the case. I tried to restart my computer, the printer, and all I can think about, but nothing works. I can print from other applications without problem, so I guess it's a problem with Lightroom.

  Someone knows something similar? I was going to uninstall lightroom and do a reinstall, but I can't find my installation disk. Now I am at a loss to figure out what to do.

  Thank you

  Craig

  Try to remove your file and/or print templates.

  Lightroom is unique in many other programs that it saves and restores the settings of the printer. Some bad data may have tried to be passes. Could contribute to a 'new beginning '.

• . Problems with PC and printer HP c309g

  We had 3 short bursts of power outages that turned my computer (with Windows 7 Premium). I use RoadRunner

  by Time-Warner and have a Linksys E1200 router and a wireless home network configuration. When I turned the computer

  the, it seemed ok, but when I printed a document, it only printed 1 page of 2. Then I went on the 'computer' desktop and

  because my HP Photosmart Premium C309g printer was on a Drive Z (that I've ever had). When I tried to open the printer, a message came up saying drive Z was somewhere on my computer, but cannot be accessed!

  I uninstalled the printer (using the original cd of HP), and he went.  The I reinstalled the printer using the HP cd,.

  but he listed with drive Z. It works, but margins are not correct and it shows only a page using WordPad.

  I also decided to use the system on the PC Restore, but before he finished, a message came up saying that he couldn't finish. Then

  I tried an earlier date using System Restore and it started, but then the same message appeared. I don't know what it

  wrong or how to fix it. System Restore has been easy to use in the past.

  Can anyone send me a free response?

  Thank you, sing Dixie

  The drive Z are the locations of card camera at the front of the printer.  Ignore them.

  Do not use the software from the CD, it is probably outdated.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

  Finally, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.149.  We will use 192.168.1.200 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Problem with Skype and Windows 8

  Received a new computer with Windows 8.  Skype came on the computer and worked great for a day.  Now it shows people I'm "unavailable" even if I'm registered.  When I make a call, it sounds just and rings and the person I call does not get notification.  Should I uninstall the Skype that came on the computer and download another version?  Any suggestions?  Please make simple answer - I'm NOT techie and I need Skype to work for my company!

  You use the Skype app?  If so try to install Skype to office and use it from the desktop.  The apps are a little more prone to disorder compared to the fuller program.

  How the desktop version of Skype on Windows 8?

  https://support.Skype.com/en/FAQ/FA12162/how-do-i-get-the-desktop-version-of-Skype-on-Windows-8

  You can also restore the system to use to return to happier times.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Another third-party program may be causing a problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Problem with Application.cfm

  Hi all
  I am facing problem with Application.cfm file. When I try to use the Application.cfm file, the whole page gets distorted with Internet Explorer. However, the page appears correctly with Firefox. If I change the name of Application1.cfm, the page is properly aligned in Internet Explorer, but my goal to download then fails.
  Any idea, why did this happen.

  Oraa wrote:
  >
  > No idea, why did this happen.
  >

  When you use your file Applciation.cfm view source in the browser and you
  will see the problem. IE is too sensitive to what anyone, including
  white space before the doctype. If the doctype is not the
  very first thing the browser receives, IE will go into quirks mode which
  often radically changes how it renders a web page. Firefox is more
  standards and ignores the outdoor spaces before the doctype.

  The Solution:
  Use one of the whitespace in ColdFusion, such as package management features
  all Applicaiton.cfm your code in a block of ... then
  no space extra is sent to the browser.

  Saves on bandwidth to!

• Problem with applications of discount shaped on Apple Watch my daughter

  Not too long ago, my daughter won a Apple Watch of our local orthodontist. This is a fun gift for the do - http://miamiorthodontist.com/miami-invisalign-provider-february-2016-contest-win ner /

  Anyway, she has problem with applications to fitness form/heart rate on his Apple Watch. Could it be because she wears it too tight or too loose on her wrist?

  Hello

  Yes - your daughter might be affected by problems due to wear his watch with a bad fit.

  For best results when the monitoring exercise, it is important that the watch to fit comfortably against the top of his wrist. To help with this, Apple suggests that users clamping shows before workouts and he release again thereafter.

  General daily wear, for best results of functions which the detection of the wrist, the Taptic engine and the heart rate sensor, the back of his see also needs to be in contact with his skin. Wear it with the right person (neither too tight nor too loose, with room for his skin to breathe) should be comfortable enough, allowing the sensors work correctly:

  

  More information:

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Problems with export and import

  I have a problem with export and import
  
  Here's what I did...
  

  exp "'/ as sysdba'" PARFILE=parfile.txt
  
  PAFILE
  
  TABLES=user1.Table1
  file=Table1_1006.dmp
  LOG=Table1_1006.log
  query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"

  Here is my log export
  

   set and AL16UTF16 NCHAR character set
  
  About to export specified tables via Conventional Path ...
  Current user changed to user1
  . . exporting table               Table1   16019049 rows exported
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  Export terminated successfully with warnings.

  Then I started to import
  

  /database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
  
  Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  Export file created by EXPORT:V10.02.01 via conventional path
  import done in US7ASCII character set and AL16UTF16 NCHAR character set
  . importing user1's objects into user1
  IMP-00015: following statement failed because the object already exists:
   "CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
   "EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
   "ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
   "RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
   "TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
   " "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
   "CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
   "AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
   "EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
   "" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
   "SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
   "ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
   "EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
   "DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
   "(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
   "ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
   "MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
   "VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
   "R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
   "  PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
   "NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)            "
   "                   LOGGING NOCOMPRESS"
  Import terminated successfully with warnings.

  but I have no lines of base2
  

  [server1]database2
  /database2/rdbm15> sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
  
  Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select count(*) from user1.Table1;
  
    COUNT(*)
  ----------
           0
  
  SQL> exit

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
  PL/SQL Release 10.2.0.5.0 - Production
  CORE    10.2.0.5.0      Production
  TNS for HPUX: Version 10.2.0.5.0 - Production
  NLSRTL Version 10.2.0.5.0 - Production

  Published by: user3636719 on October 6, 2011 17:23

  could ignore = y, and then try again. It should work

  Concerning
  Julien

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• problem with java and pogo games

  I use mozilla, and now with the problems with java and hackers cannot play my pogo, what can I do? I disabled my java I tried java 6 does not work or is not safe, what is a safe way to play games on pogo using java?

  Pogo.com is determined as a website SAFE to use Java with Mozilla Firefox?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.