View that all history is empty?

Similar Questions

• View that all bookmarks does not appear in the bookmarks menu. Found a reference to < ctrl > < schedule > B and it opens the library, but I would like the new Menu item.

  Just installed Foxfire. I thought I saw that 'show all '. "in my original nose around, but not 100% sure. Trying to import Google Chrome bookmarks and instruction through the view of library to load.

  You are welcome

  You can find the toolbar buttons to open the bookmarks (star) and history (clock) in the sidebar in the palette of the toolbar and drag it to a toolbar.
  
  Customize Firefox 4 has two buttons bookmark with a star in the window.
  
  A single star button has a marker to drop that open Bookmark menu.
  
  The other star button without the marker drop open bookmarks in the sidebar.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

• CP1215 reports that all of the color ink cartridges are empty

  HP CP1215 reports that all of the color ink cartridges are empty, but they were rarely used, the BLACK toner then indicates 72%, all three color inks report 0%.

  Hello

  Thanks for the post.  It's weird, there's a way to go beyond this message, I have included a link below with the explanation and why this happens.  Good luck!

  http://support.HP.com/us-en/document/c01905250

  http://support.HP.com/us-en/document/c01788825

• Fix points of view on all aircraft cockpit that has no cockpit view when flying them. I know you can.

  Why did in Flight Simulator x with the expansion pack Microsoft, each plane has the cockpit view with all the templates and everything for this particular

  aircraft. but in Microsoft Flight, I own several aircraft there is no cockpit view, and if you want to fly from the cockpit, you feel like you are flying in

  flight with no noise of the aircraft, and there is no realism with some aircraft. I want to know why you done guys and why it can not

  be fixed. My P51s should have a cockpit view, they do in my other flight sim.  What is the difference of Microsoft Flight that you guys make with

  several aircraft Microsoft Flight is supposed to be more realistic than any other Flight Simulator you ever turned off, so make and deliver cockpits

  these planes so that it is as real as this. That's what many of us think Microsoft Flight was going to be, it has never been the most realistic Flight Simulator.

  Hello

  What version of the Windows operating system is installed on the computer?
   
  The question you posted would be better on the support forum for Microsoft Flight Simulator. I suggest you to post the question on the following link: http://www.microsoft.com/Products/Games/FSInsider/community/Pages/default.aspx
   
  You can also check out the link below which gives you all the information on Flight simulator X and how to fix the problem and let us know if this helps you to solve the problem.
  Here is the link: http://support.microsoft.com/gp/cp_flightsim_master#tab0

• Is there a reason that my history of editing has apparently been deleted?

  I went to windows update to search for updates there were two more "important." I chose "install". By day, I clicked on troubleshooting in windows update (because, I guess in my mind that he did not go enough fast? I don't know.) Anyway, it was suggested that it would be more prosperous troubleshooting with administrator permissions. So, I did. I troubleshoot-done as an administrator. Then all updates which have already passed or failed that were already installed on this computer has disappeared from the history of the update. All of a sudden my computer has never been updated, there was ever a check of updates. Following the advice of my local computer repair shop, I did a system restore to yesterday. Restarting the computer itself and everything seemed to proceed as planned. But when I finally reached the home screen (I don't know what else to call it, the screen where the icons of applications are, including the place of the office) and entered the office and nothing. I then turned off again and everything seems back to normal. Two updates installed successfully. But they are the only updates that exist in history. The system restore has nothing... apparently. I just want to know if I messed up. Is it normal that there no update in the history of the update, other than those installed today, as they now seem to install automatically? Is there a reason that my history of editing has apparently been deleted? I'm really sorry if it's super confusing. I'm not good at summarizing. Thanks for any help.

  Original title: I don't know what I did

  Hello

  If Windows Update Troubleshooter reset components Windows Update or run the preparation tool update of the system during the process it would be empty folder of Distribution of software which causes the update history disappear.  There is nothing wrong with the system, and as long as the updates are installed I wouldn't worry on this subject.

• All fields are empty when the button is clicked

  Hello

  I have the result and 2 window search criteria. all the fields in the search window are not visible when the user enters some search criteria and click on the button Search opens the window of results, the opening of the result window, I want to say is not no button text box are visible in the search window, the window is empty. Please can someone tell what is wrong, what I have to change any property of window or controls.

  Thank you

  Vish

  Hello

  Oh no problem, you must use 1 table of main content & display the search result in the stacked with the next consideration...

  Please note on canvases stacked that you have the following properties of the view-port, which explain the key solution do not display the form elements in your case.

  1- T it position from view of the piled in canvas (Viewport) on the table of contents of the current window. (Display X, Y Position window)

  a.Viewport X, position Y on the window:

  Specifies the coordinates x, y to the left corner of the canvas stack relative to the top left of the display of the contents of the current window.

  -This means that the position of the top left of your canvas stacked on top of the canvas content.

  b.Viewport WIDTH, HEIGHT

  Specifies the width and height of the display for a stacked canvas.

  -This means that the actual size and the position of the view that defines the part of the drawing area is displayed in the window running.

  2- T it position from view of the piled in canvas (Viewport) on stacked canvas itself. (Display X, Y Position on canvas window)

  Viewport X, position Y on canvas

  Specifies the location of the top left corner of the view from the upper left corner of the canvas. The size and location of the window define the view; in other words, the part of the canvas which is currently visible in the window which is attributed the canvas.

  This parameter specifies what part of your willingness to stacked canvas the viewport (visibility) will cover.

  These properties help you make your most visible form elements on your canvas without using the scroll bar.

  You should try for yourself & recognize more clearly.

  Amatu Allah

• Game to "Save history" for 30 days, can only view last 7 days - how can I view the longer history of 7 days?

  "Save history" set to 30 days but can only view last 7 days of history - how can I view the longer history of 7 days?

  According to your troubleshooting info, you have 2 set preferences to update the:
  Browser.history_expire_days
  7

  Browser.history_expire_days. Mirror
  7

  In the address bar, type Subject: config and press ENTER. The subject: config "This might void your warranty!" warning page may appear. Click on that I'll be careful, I promise! to continue on the subject: config page.
  Search for the preference browser.history_expire_days. Right-click on it and select reset. Do the same for other preferences.

• My computer says that my drive is empty when it is not...

  I have a toshiba satellite l300 with windows vista and a dvd - r with pictures on it, and whenever I try to watch the photos told me that the disk is empty, but if I try to put something else on the disc it then told me that the disk is write protected.
  I know for a fact that the photos are on the dvd because I can play with my Xbox 360 and also my dvd player, and I also watched them at my friend using their computer.
  Does anyone know why my computer says dvd is blank when it clearly isn't?
  I did not burn the dvd, that it was given to me so I don't know anything about how it is burned, but I know that the photos ARE out there and I really need to find a way to get them on my computer.

  Hello

  Some discs will not work on other machines to due to different alignment problems. Other discs work on your machine, or just one or a few? If only a few then the tolerance of the machine and your unit are on opposite sides of the authorized spectrum. You might even find some discs burn you work on another computer when those burned on it will not work on your. This is because your drive is in fact several devices in one box and the tolerance of each part can be defined in different. Readers can be re-aligned however normally it's really not worth doing.

  ---------------------------------------------------------

  If you have problems with all the drives check the below:

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack.

  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• You can create a view that filters (ESX host) Linux machines on the view of the Infrastructure?

  Hello

  We have recently implemented Foglight and VMware plugin. As part of the VMware plugin, Foglight pulls in all the Linux VM machines including the ESX host. Our team of Linux only manages the running redhat Linux hosts. They fail the ESX VM guest. That said, is there a way to create a view that shows only the hosts running redhat Linux?

  For example the view of rail infrastructure below contains 88 Linux machines, but nearly half of them are ESX hosts for our Linux team would not see all these. Is it possible to filter these?

  

  Any help is appreciated.

  Thank you

  Tony

  The easiest way would be to create a personalized, pair it with Infrastructure and then create a dynamic management component.  This will help create you a rule for "All hosts" where you can find just the hosts that are not of the ESX host and run Linux.

  The query would be:

  detail.topologyTypeName! = "VMWESXServer" & os.longName like «% Linux»

• Move a layer from one document to another, I get the error message that the layer is empty

  When I copy a layer from one document to another in PS CC 2015.5 and then try to move the layer in the destination document, I get the error message that the layer is empty.  It is not empty and I checked several times and checked that the layer is not empty.  I have never had this problem before and wonder if something has changed in CC 2015.5.

  Thanks to all who responded.  I think the problem was that I was using the NEF files and that he had not yet renamed PSD files.  Copy the layer in the destination document, but when I tried to move the layer in the destination document, I received the error message.  Apparently, he was copying the layer but there not then recognize the NEF format.  Once I saved both documents to the PSD, then the program behaved normally.  I appreciate your all of the help.

  Sue

• Last night my records on CC has stopped working and I could not send links. I asked for help earlier today and brushed with SORRY low servers! Night, that all records have now disappeared from CC, does not do well at all.

  I haven't used CC for a long time, and with my first problem, I found the support to be completely useless.

  @tip0 - there is a problem with the public links (link to send) that has been partially resolved. New links will work and we are working to solve the problem with the existing links (not all existing links are concerned).

  I looked at metadata file to your account and see that at the top level, you have 9 folders (containing the files) under files; and 1 file and a folder (containing the files) in the Archive at https://assets.adobe.com/files?filter=archive. Please send me a private Forum Message or send me an email to [email protected] with a screenshot of the view that see you on the active Web site. You use the file sync feature? If Yes please send me a screenshot of the creative Cloud Files folder on your computer.

• How to check that all the options enabled in Oracle Database EE

  Hello
  
  I'm new on OTN.
  
  How to check that all the options enabled in Oracle Database EE?
  
  Thank you
  Vincent

  Hello

  Select decode(detected_usages,0,2,1) nop,
  name, version, detected_usages, currently_used,
  to_char(first_usage_date,'DD/mm/YYYY') first_usage_date,
  to_char(last_usage_date,'DD/mm/YYYY') last_usage_date
  of dba_feature_usage_statistics
  order by nop, 1, 2
  Or

  v$ option view

  Thank you
  LaserSoft

• search for the name of view that can be added to the responsibility

  Hi Experts,
  
  How to find the name of view that can be added to that have been attributed to see the views of Catalog under quotes and orders.
  
  Help, please.
  
  Thank you and best wishes in advance

  Hello

  I guess that you do not specifically a particular display. If you want to find all the views in the Catalog under the orders & quotes you can follow the steps below:

  In the tab tools-flat - Select - display Template Web items:

  a. catalog views under citations: name that quotecatalog query * and GParentView in the catalog.

  You will be able to find the points of view. I am not correct on all points of view related to quotes. Choose from the list.

  b. catalog views under orders: name as orderEnrty query * and GParentView in the catalog.

  You will be able to find the points of view. I am not correct on all points of view related to quotes. Choose from the list.

  Try this and let me know.

  Kind regards
  Joseph

• Define a view that refers to the tables of 50?

  Hello
  
  I have a problem at hand, and I'm not sure what I can adopt the right solution.
  
  There is a demand which has just hit the DB (v11.2) to access a single view "XVIEW. This view has a simple sql & join that is based on two tables XTABLE1 and XTABLE2.
  
  Now, the new version of the schema that has been released has split XTABLE2 into 50 paintings different each with the same structure. For the correction of the question, there are two solutions I could think:
  
  1. create 50 views above 50 paintings and difficulty of enforcement to designate these 50 new views. Note: the app has hundreds of references and it has an important work involved.
  
  2 rewrite XVIEW refer to 50 paintings. You can avoid so modify the application, however I do not know if this is feasible and will have a decent performance.
  
  I would go for solution 2, because it requires a lot less effort, but do not know how to set the view, only the 50 table structure is the same that I can just union of them?
  
  Thanks for the help.

  Hello

  Hozy says:
  Frank, thank you for help out me.

  What you are proposing is that I should recreate the XVIEW view what union did all (as the lines will be unique) 50 paintings, however performance will be a problem unless I can create a materialized views.

  I know of materialized views, what it is used for static pre-calculated data type.

  A materialized view is pre calculated; This is what makes it faster. The time and effort spent, in doing so, the UNION is moved from the moment you make queries at the same time when you refresh the materialized view. If it's more or less total time depends on how many times you query the view and how often you refresh. In any case, the performance when you perform them queries will be as good as possible.
  Views materialized ar often used in data wharehouses, where then can only change once a month, but they are also often used in situations like yours, when data changes on a daily basis, or even more frequently.

  In my case, the little 50 tables data can change once every 24 hours and all this comes at some point. Queries that hit XVIEW should obtain the most recent data. Is there a way I can define a materialized view that will pick up the new data in the base tables 50?

  I see it; you have some job that turns to, say, 02:00 every morning and changes some, or perhaps all, 50 tables. You can refresh the materialized view to, say, 04:00 daily, or at some point, when you are sure that the changes made to the tables of the Basic are completed. Any query that uses the view materialized between 02:00 and 04:00 will get outdated data.
  Otherwise, you could do the materilaized view Refresh whenever one of these base tables changes, but it uses more resources, including your time and effort to set up.

• How can I make sure that all components in my opinion have been instantiated to test

  I'm testing a view 'view', which has an ADG but the ADG is null.

  Try this code:

  view.adg.dataProvider = data;

  How can I make sure that all components in my opinion have been instantiated to test?

  private var view: UserManagement;
  [Front]
  public void Setup (): void
  {
  
  view = new UserManagement;
  
  }

  [Test]
  public function testSaveData (): void
  {
  var data: collection ArrayCollection = new ArrayCollection();
  for (var i: int = 0; i < 1000; i ++)
  {
  var item: Object = new Object;
  element.isModifiedClientSide = Math.round (Math.random () * 1);
  data.addItem (element);
  
  }
  view.adg.dataProvider = data;
  
  }
  

  You have instantiated your view.  Usually, when I'm working with a view, mine looks like this

  private var myView:MyViewClass;

  [Before(async,ui)]
  

  public void Setup (): void

  {

  Bird = new MyViewClass();

  Async.proceedOnEvent (this, opinion, FlexEvent.CREATION_COMPLETE, 500);

  UIImpersonator.addChild (bird);

  }

  [After]

  public function teardown (): void

  {

  UIImpersonator.removeChild (bird);

  Bird = null;

  }

  Here is a link detailing using display classes in unit tests

  http://docs.FlexUnit.org/index.php?title=UIImpersonator