view the files copied 24/06/12 through 29/06/12

Similar Questions

• Problem regarding content previously highlighted when you view the file in Acrobat DC.

  I have a problem with the content previously highlighted when you view the file in Acrobat DC. There is no problem in earlier versions of Acrobat. I pointed out the portions many documents with a point culminating opacity 50% and now shows the text in black and white and highlighted portions are not readable. This only became an issue when I recently installed Acrobat DC. The system is Windows 7. Y at - it a setting I need to select to make the text readable again?

  To change the color and opacity of the commentary on the matches of the current document, you can use script below.

  Note : this script will replace the opacity settings and the color of all the comments of highlight for PDF files open. Please save documents before store you settings to highlight comments. This script can be used until a fix is available.

  Steps to follow:

  1. open all PDFs in Acrobat DC comments are present in the games.

  2. press Ctrl + j

  3. in the lower part of the text, copy the Script below.

  4. Select all of the text copied in the previous step, and then press Ctrl + Enter

  5 opacity of all comment games goes to 100% and change color to light gray.

  *******************************************************

  var hightlightColor = color.ltGray;

  var highlightOpacity = 1.0;

  DDP = app.activeDocs;

  for (docNum = 0; docNum)< pdd.length;="">

  commentArray = DP [docNum] .getAnnots ();

  for (i = 0; i< commentarray.length;="">

  If (commentArray [i] .Guy == "Highlight": game commentArray [i] == "HighlightNote") {}

  commentArray [i] .opacity = highlightOpacity;

  commentArray [i] .strokeColor = hightlightColor;

  }

  }

  }

  **********************************************************

  You can change the opacity (highlightOpacity in above script ) for any value between 0.0 and 1.0, where 0.0 is transparent and 1.0 is opaque.

  Some possible values for the highlight color (hightlightColor in above script) are: color.blue, color.cyan, color.yellow, color.gray, color.magenta, color.red, color.green.

  Rohit-

• Not able to view the files in Windows XP after installing Ubuntu 10.10.

  Original title: problem opening of windows.

  I installed ubuntu 10.10 on my system unfortunately it took total hard drive in a single partition and now I am not able to access microsoft windows. What to do there are a lot of important files in that partition. I am not able to view the files that have been seen in windows. Please suggest.
  concerning
  Hari

  Hi hari,.

  It seems that Ubuntu has supported the installation of Windows. At this point, I would recommend youto contact support Ubuntu uninstall Ubuntu. This should return Windows XP & you can access your files.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In the Web sites or e-mail, when it is open or download a file doesn't allow me to view the file.

  I go to sites or emails and I click Open or download to open a file and it does not display the file... I am in desperate need to solve this problem thanks.

  Hello Mayela_202,

  You can check to see if reset you your assoications by default, so you can now view the files.

  pen Control Panel (all items view) and click the default programs.

  Click on the game to link your default programs.
  In the left column, select the program (highlighted) a list that you want to change the associations is default for file.
  To set all Assciations by default in the Program-
  NOTE: This will allow to associate the selected program by default used by Windows Vista to open all types of files and protocols it can open.
  Click set this program as default.
  Click Save to apply.
  Click OK.

  Let us know if it helps or if I misunderstood your question.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't find the option view the files and folders under my tab options folder... Please help

  I can't find the option view the files and folders under my tab options folder... Please help

  I can't find the option view the files and folders under my tab options folder... Please help

  Assuming you are using Vista...

  Start button > in the search box, type folder options > press the Enter key > display tab > (see screenshot)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Import and view the files on a memory card from your USB connected printer (Windows 8)

  Hello everyone

  Have you ever wondered if there was a way to access the files on a memory card in the printer to your computer? Is there. Here's a video that shows how import or view the files on a memory card in the printer of Windows 8 if the printer is connected via USB.

  This video shows you how to import and display the files and images in Windows 8 on your computer, when you insert a memory card into your USB connected printer.

  I hope that aid video above.

  This is especially useful if you do not have a computer with a memory card reading and you need to retrieve an image from a memory card.

• How to remove the file copy unfinished "MyAccount" W2K3 VM or host Win7?

  
  People,

  Hello. I use VM Player 3. The OS is Windows 7 and VM is Windows Server 2003.

  I copy a 22GB file "MyAccount" of VM-W2K3 to Host Win7 because hard disk in Win 7 host have 25 GB. In the copy of the file, a message appears as below:

  "It takes extra 22GB copy your file.

  I click the button CANCEL. But the file has not disappeared. The copy of the incomplete file is still in the machine virtual and busy 22 GB of disk space in W2K3 VM or host wind 7.

  My question is:

  How to remove the file copy unfinished "MyAccount" W2K3 VM or host Win7?

  Thank you.

  People,

  Hello. I found the 22GB "myfoder" file in the directory VMwarDnD on Windows 7 computer host computer. When copy us files from VM to the host, they go to this directory first and then go to the desktop. I deleted a lot of files in this directory to get the amount of disk space.

  The problem is resolved. Thank you.

• Cannot view the files on creative cloud

  I can't view the files I've downloaded on creative cloud. Yesterday, I joined creative cloud.

  The CC system is currently unavailable. We are actively investigating the issue in order to restore the service as soon as possible. We will provide updates here on the Adobe Forums.

  We apologize for the inconvenience.

• view the file delimited by tabs on a table VI

  Hi all

  I have a delimited file tab I want to view help for the Table control.

  I tried to use the tab settings and / n in a while loop to search for the file and display it on the table.

  However, this will not work because the file is of variable size, i.e. some lines have columns others will have 2.

  Is their a simple VI to import delimited by tabs of files does anyone know?

  Thank you

  Sean

  Please try the primitive "worksheet of array of strings. It will be useful.

• What should be the file size of Vista SP2 through Windows Update If SP1 is already installed?

  Hello

  Please could someone clarify this? I read on a few messages that if Vista SP1 is already installed then the Vista SP2 update file size should be around 40-50 MB.

  I checked manually through Windows Update > check for updates. He finds updated Vista SP2, but the file size is of approximately of 340-350 MB.

  Thanks in advance for your suggestions.

  http://TechNet.Microsoft.com/en-us/library/dd335036.aspx

  Indicates that there should be ~ 43meg for 32-bit and ~ 60meg for 64 bit.

  It can be substantially larger depending on how many updates between SP1 and SP2 are not already installed. Microsoft partner

• Cannot use the files copied from Windows 8/7/Vista in windows XP.

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  How is the "pen drive" formatted - with what the specific OS file system?
   
  This is more likely to be a file system - do not operating system (although related, not as much as you might think)-problem.  Another possibility is a problem hardware or bad driver on the machine Windows XP itself.  It could also be, although rare, an incompatible 'USB key '.
   
  What is the 'pen drive' is formatted with the file system is essentially - the first question to ask.  Then - if I were you - I everything on the 'pen drive' copy on a computer which can be read - if committed to the machine more common denominator (in this case the Windows XP machine) you will use and FORMAT this 'pen drive' using this machine.  One of the few possible things will happen no doubt...

  (1) you'll find you format it with a version of NTFS that will work in all areas - all the machines that you can use with Windows XP or more on them.  Then this problem will disappear.

  (2) you will find there * is * something wrong with the Windows XP specific in question and this machine is not a problem easily solved this and your "pen drive" probably will work on someone elses machine Windows XP very well as it existed before.

  (3) you will end up with a FAT32 formatted "pen drive" that should work on most any system - as long as you don't need to transfer * really * large individual files.

• Cannot view the files on a flash drive from a Mac on a PC with Vista.

  Hello

  my friend put files of photos and music on a USB mass storage. She has an apple mac and I have windows vista on my pc. WHN I plug in the USB on my computer that nothing comes. What can I do so that I can view and use the files.

  some tips would be much appreciated.

  Hi AmberBarton,

  It seems that the Flash DRIVE has been formatted Mac OS, that would make you do not see the files saved on it.  You need to format the drive to FAT32 flash so that the files to be played on Mac and PC.

  I suggest you check the website of the manufacturer of the USB key for specific instructions on how to do it.

  Thank you!

• BlackBerry Smartphones unable to view the files on SD card via USB on Windows PC

  I am a new PRIVATE owner (increased from Z10) and I can't seem to view the contents of my SD card on my WIN10 PC when it is connected via a USB cable.

  In fact, none of the content on the PRIV are displayed on my WIN10 PC when connected via USB.

  I installed the USB driver on the BlackBerry site, formatted the SD card several times installed solid Explorer file manager and the solid grip explore USB OTG.

  When I connect to my PC WIN10, I can see the folder "Blackberry STV-1000 ' pop up, but the content of the files folder is empty - with none under folders displayed - even if there is a"Music"folder on the SD card.

  I would like to see/transfer files to my PRIV connected via USB to my PC.  Why is it so difficult?

  Thank you
  Herb...

  Problem solved...

  I noticed that after plugging in the USB, you have to swipe down with one finger... noticed the 'connected in charge mode' and you select 'file transfer '.

  It works now!

  Bab... a lot of research to do this simple task is coming!

• CSV export doesn't is not updated the file when it is run through Task Scheduler

  Hello

  A long time have not posted in the VMWare forum... I have a script which generates the host UpTime and export the result to CSV file. It then sends the CSV file as an attachment to our helpdesk system. When I run the script manually through PowerCLI./Get-HostUpTime.ps1 it works fine and it sends the file updated, however, when the script runs through the Windows Task Scheduler, it works very well but is not updated the CSV file and it always sends the former.

  $username = "administrator."

  $password = "password"

  $cred = New-Object System.Management.Automation.PSCredential - ArgumentList @($username, (ConvertTo-SecureString-String $password-AsPlainText-Force))

  SE connect-VIServer-Server vCenter01-Credential $cred

  Notice-EEG - ViewType "HostSystem" - name of the property, summary | `

  where {}

  {$_ .name - like "*"} | »

  Select Name, @{N = "Uptime"; E = {(get-date) - $_.} Summary.Runtime.BootTime}

  } | sort name | Export-csv C:\Scripts\HostsUpTime.csv

  Disconnect-VIServer-confirm: $false

  Send-MailMessage-to [email protected] -To [email protected] -topic "vSphere host UpTime" SmtpServer - accessories SMTPHUB001-C:\Scripts\HostsUpTime.csv

  Any help?

  Thank you

  I propose now to take the next step and include a PowerCLI cmdlet.

  Something like that

  Notice-EEG - ViewType "HostSystem" - name of the property. Select name. Export-Csv C:\Scripts\HostsUpTime.csv

  I just noticed, you don't seem to have a

  Add-pssnapin VMware.VimAutomation.Core

  in your script. Have you who left on purpose?

  If the snap-in is not loaded, you will not be able to use the PowerCLI cmdlets.

• Guest VM Mac - IP address and the file copy host

  Hi all

  I'm involved with the automatic configuration of the guest virtual machines in Mac. In this context, I want to start and stop the virtual machine automatically. Also, I want to copy files between the host and the guest and launch programs automatically in the comments.

  -

  ---

  System details:

  VMware Fusion: Version 3.1.1 (282344)

  Host of Office Mac: OS X 10.5.8

  Comments to VMware Mac: OS X 10.6.2 Server 64-bit

  VMware Tools installed

  -

  ---

  1. I am able to use the vmrun as 'start', 'stop' commands, etc. But I'm unable to use the controls of the operating system called as 'runProgramInGuest' and 'copyFileFromHostToGuest '. I understand an exhaustive search, Mac Guest VM does support all the vmrun commands. Please specify if this isn't the case.

  2. because the vmrun commands do not work, and I always want to copy files to the guest, I try to get the IP of the host Mac address to connect to the FTP host - essentially treat them as 2 different machines on the network. Please specify whether it is possible to get the IP address of the Mac Guest VM and copy the files in the manner described.

  Thanks in advance,

  Hema

  Hi Hema,

  Welcome to the forums.

  I have no experience with the Fusion, but I had to work on the same problem with VMware Player. If your guest is using NAT network connection, you should be able to find its dynamic IP address in the DHCP leases file placed at:

  -/var/db/VMware/vmnet-dhcpd-vmnet8.leases

  As long as you know its mac address, you should find its IP address.

  It may be useful

  Concerning

  Franck