Virtual Excel file import NI Switch Executive device problem
When I try to import OR switch Executive configuration to a file .xlxs error
"An error occurred trying to read the file. Invalid device name «THIRD _PARTY_MATRIX» IVI "An error occurred while trying to access primary device _PARTY_MATRIX error THIRD: (Hex 0xBFFA4001) unknown status code.
is displayed. I have no problem importing OR switch configuration Executive in .xml format! Can someone tell me why? Please, I beg you!
I use a switch
Executive 3.0
Measurement and Automation Explorer worm 4.5.0f0
LabVIEW 8.6.1
Thank you very much
Hi Mehran,
Thanks for providing the attached files. I have determined that the cause of the problem may be due to a setting of simulation of IVI.
Currently, your IVI Driver Max sessions are configured so that simulate attribute is set to False. This means that real hardware must be connected when opening a session IVI instrument. If you do not have the hardware attached, then the call to initialize IVI fails (and potentially bad, depending on how the IVI specific driver manages an init call without hardware).
Import the NI Switch Executive configuration in .xml format does not cause a problem because simulate is always set to true in the call to initialize of IVI.
We will consider changing the import Excel in the future to also have always simulate the True value. Time, you can a) check the hardware is connected when you import Excel, or b) set the value "Simulate with" Max to 'Specific Driver' applicable IVI pilot sessions.
Example of setting "with"to simulate 'Specfic Driver' of MAX:
Let me know if you have any other questions!
Chad Erickson
Switch Product Support Engineer
NOR - USA
Tags: NI Products
Similar Questions
-
Import Excel file into address book Thunderbird
An Excel file can be imported into the Thunderbird AddressBook? If so, how?
Save the worksheet to a CSV file, which can be imported into Thunderbird address book.
This article lists the fields that can be used by Thunderbird. You will facilitate the import process if you can organize your spreadsheet/CSV file to match.
Here is some info about the import process.
-
How to import Excel file to GUI of LabWindow
Does anyone know how to import the Excel file to LabWindow CVI GUI. Thank you
It is not clear to me that you want to embed an Excel described in a panel of CVI or import data from the worksheet. CVI is delivered with an instrument ActiveX that you can use for reading Excel interface / write data from files. Otherwise, CVI can host Excel documents and interact with them. All these activities are conducted via a special instrument of ActiveX (Excel2000.fp).
Interaction with Excel was often treated in the forums you can perform a query to extract useful information. There are also several examples that you can download and study to understand how to use these instruments: some of them are listed on this page.
-
Import Excel file into oracle Apex table
Hello
using the Application Express 4.2.5.00.08
Oracle 11g.
My question is how do I import data into oracle using the APEX of EXCEL file table please? Any other file format.
Thank you very much
RI
Irha10 wrote:
using the Application Express 4.2.5.00.08
Oracle 11g.
My question is how do I import data into oracle using the APEX of EXCEL file table please? Any other file format.
-
I need to import a simple Excel file in InDesign, but it must be free of error, what are the system requirements of InDesign and Excel?
but it must be free of errors
Do you mean without errors in the text or formatting? When you place an Excel doc, the Place dialog box allows you to display Import Options. You can choose to place as a non formatted table and apply to any InDesign Table Style.
-
File/import/Images of device / 'no camera or scanner not selected'... no device. Where is he? iMac El Capitan
Hi Tsavaruach,
Could if it you please let me know the version of Lightroom that you are working on, also please make sure that Lightroom is to this day.
Please update: keeping up-to-date for Lightroom
Kind regards
Tanuj
-
Impossible to import an excel file into dreamweaver
I wan't to import an excel file in dreamweaver. At first I didn't know how, but I discovered I havo to go to import > excel document. However, I am not able to select this option. Can someone help me with this problem?
This option is only active for me after clicking somewhere in the design view.
Even if that location is the same as the location of the cursor in the Code view, it still it will not until I put emphasis in the design.
As always, Live View is not her at all.
-
How can I import an excel file into an already existing form on the PDF (via AdobePro)? No data just directly, drop-down lists.
Hi spencert3881156,
Please post on the Adobe forums.
You can visit the following link on the same thread:
Can I import data from an Excel worksheet to a PDF form? (Create PDF)
Let me know if this helps.
Kind regards
Ana Maria
-
Is it possible to import Openscript OTM tests like a large CSV/excel file
Hello
Can you please tell me if it is possible to import Openscript OTM tests like a large CSV/excel file?
Thank you
MeghaHello Megha
You want to import test OpenScript from a CSV file right cases?
If you take a look at the menu in OTM: project-> import data-> select an xls or csv file, you can see that you can import only manual test cases.So the only option would be to try to create test cases automated using SQL directly in the scheme of the OTM.
I've never done this (I did for requirements & manual test case).JB
-
problem in import of excel file
Hi Experts...
I'm new in odi 11g.
I created the system Dsn for the Excel driver.
I created a physical and logical schema in Microsoft Excel technology and new model Excel file.
But when I click on bone to import Excel files, it works, but the Excel files are not imported.
Please help me with this, it's urgent.
Thank you
Published by: 906322 on March 7, 2012 07:26Hey, take a look at this document.
https://blogs.Oracle.com/dataintegration/entry/connecting_to_microsoft_excel
Thanks in advance to Julien (he is the author of the document)This was really helpful when I did!
Let me know if you got a problem with it.
Best regards.
J
Published by: J_ORCL on March 7, 2012 08:50
-
I installed Fusion 2.0.4 and it works very well. I have created a virtual machine of my IBM T42 (80 GB HDD) and flies over the files. Works great for a week. Then I saw the video on how to do this and in the end, they suggest and then move the VM files (the 2 GB dismembered ones) in VMware created machine virtual file in the folder my documents (show the contents of the package and drag all the files - virtual disk - hard from 2 GB in it). I did this and with the very next reboot got the following dialog box:
Device virtual serial0: file ' / var/folders/of/Ofj2TvSREZ8E9w8YsqlbxE +++ TI/Tmp / / vmware-jimstem/thnuclnt-312/socket - "exists, but he listens without a server.
There are three possible causes for this:
. The server is alive but not ready yet, and you can try again later.
. The server is busy communicating with another customer, so you can't run this client at the same time.
. A previous server is released abruptly, and you can delete the file and try again.
The appliance is disconnected.
This has happened AFTER that I moved these files of 2 GB in the contents of the package. Why? How should I do?
With the Virtual Machine to stop, not suspended, of in the guest OS and closed Fusion de dans les os invite et fusion fermee redemarrer restart the Mac and then open Fusion, and then start the Virtual Machine and if you still get the error then provide files .log, as defined in the collection of information for VMware Fusion and the .vmx file and a list of files as defined in the document, the packaging of the Virtual Machine. Archive and attach all requested files.
-
I installed Fusion 2.0.3 and it worked fine the first time. After that I restarted the Mac, I restarted VMware and got the following dialog box:
Device virtual serial0: file ' / var/folders/cJ/cJOdgDPEhOC3nse7RDt4+++ TI/Tmp / / vmware-richard/thnuclnt-314/socket - "exists, but he listens without a server.
There are three possible causes for this:
. The server is alive but not ready yet, and you can try again later.
. The server is busy communicating with another customer, so you can't run this client at the same time.
. A previous server is released abruptly, and you can delete the file and try again.
The appliance is disconnected.
Should I worry about this? It doesn't seem to be something else wrong.
Only thing again: a "GoToMeeting" application has been installed when I signed a collaboration site. It is a virtual desktop application.
3 GHz iMac 10.5.6/XP Pro SP3
You have a problem with the print share ThinPrint (enables the printing of comments with printer host without having to set up a printer on the client). How long wait it after start up the Mac before the merger? It happens every time you start the Mac, or just this once?
I generally let Mac run for a minute or so before the merger, seems properly time to get all the processes of Fusion Mac passes during the first boot.
-
import data from excel files variables
Im trying to find a way to import 3 sets of variable data
in a provision saying a certificate variables being, for example, a name, a date of passage and a location.
instead of typing 100 different certificates is there a way to create a layout with 3 variable data fields can import information from a pre existing excel file, thus making 100 different pages I can send it to print. the work exists in bridge CS4 and I have an excel with all the info file, the info should be formatted in a specific way.
HELP this is a persistent problem.
Don't worry, it's not difficult (if the XML is very good) you can select and set any text or dynamic object... But to explain here is a little difficult to do... a video tut this is what you need...
G
-
Is there a simple way to import an excel file to use as the basis for the creation of a report?
On the utilities tab, you can download a spreadsheet (which has been saved as a CSV file) into a new table of data loading and unloading. The table will be based on the columns of the worksheet, so it helps to have the first row contains column names. After importing, you can go to your application and create a report on this table.
-
import different tables of different sheets of an excel file
Hello
The task is to get several (different) arrays that are in different sheets of an excel file. I tried to use the report generation tool, get Excel spreadsheet, Excel get the data functions. but the problem there is that Excel get worksheet function requires a contribution of report. but I only have an excel input file and I can't feed that. Y at - it an alternative to this?
Simply create a report using the new report. Wiring in the path to your Excel file as the 'template '. In addition, make sure you have the report when you are finished with it.
Maybe you are looking for
-
Windows tells me insufficient disk space
Hello Could you please help me? These days my system gives me a message of low disk space, if I want to clear memory please press here... \Then I do a cleaning disc, of the removal of temporary files and other things, I even deleted some of my insyal
-
Change the sequence directly after loading sequences
Hello I intend to write a sort of Profiler to see what stage most testtime consumtion. That's why I use engine callbacks SequenceFilePreStep and SequenceFilePostStep. Whenever a step in order is executed the SequenceFilePreStep generates a timestamp
-
HP deskjet 920C: deskjet 920C in Toolbox ink levels
As I changed again to a new computer with Windows 8.1 my printer works fine, BUT I can't figure out how to find my ink level as I have in the Toolbox of the printer on my old computer with Windows XP. Any ideas?
-
Compaq Presario CQ57: My Compaq is slow and I want to make it faster
I have an AMD C - 50 1 GHz processor and 2.00 GB of memory I would like to at least 1.6 GHz and 8 GB of ram Is it possible to do?
-
Hello I bought a lifecam HD-3000 to make an image with opencv processing in microsoft vs c ++ 2010. Everytime I open the camera and see the picture continuously. the automatic white balance is on and auto exposure is on. It's strange because I turned