Vista cannot properly configure security updates

From the Windows update site Lexmark driver download, Vista fails to set up new security updates. so they keep download every time I turn on my system and then fail to set up the next time I start up.

The restore point created when I downloaded the drivers Lexmark has been deleted, so I can't restore my system.

Vista seems to work ok, but I'm afraid I do not have the latest security.

I appreciate the thoughts and recommendations.

Go to the Lexmark device and try to restore the device driver to the version that was functioning before the installation of Windows Update.  Then see if the problem is resolved.

If this does not work, try to uninstall the update of the Lexmakr driver in the start menu / Control Panel / programs and features / updates installed and then reboot and see if that solves the problem.

If this does not work, go to Lexmakr and get the latest drivers for your system and the versions of Vista and install instead of what you currently have.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you do it for the Lexmark device), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you need to disable the autopilot from Windows Update updates as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

    When you do the automatic updates of Windows Vista, I get the code below.

    'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

    • What should I do to fix this?
    • And what does this update actually?

    Thanks for any help provided.

    scrubie,
    If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

    Hope that helps. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install the security update. Received error Code 0 x 643. What is it? What should I do?

    Attempted to install

    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353).

    Not successful installation: received error code 0 x 643.  What is the problem?  Where can I find information to solve this problem?

    Thank you.

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

    When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
    http://support.Microsoft.com/kb/976982

    Use the foregoing as guides to solve the problem.

    If necessary:

    Click on the following link to download the .NET Framework cleanup tool:

    You can use this to check what versions are actually installed on your computer:

    The user guide for the .NET framework installation check tool
    http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  • Cannot download, news, security, update, 2016-001., I, have, shut down, my, screen, saver and, my, lock, program, but still, won't, load., everyone, know, what, the, problem, ould c, be?

    I can't get the last security update for download.  I have Adblock and screen saver have stopped, but in vain.

    Try to download it from the link below.

    Security update 2016-001

  • Cannot install 9 security updates

    I have 9 security updates will not take. How to solve this?

    River,

    http://support.Microsoft.com/kb/555375

    It helps those answering questions if you provide:

    What version of windows (32-bit or 64-bit) and service pack level.

    you use what browser (exact version).

    What application or antivirus security suite is installed and your current subscription?

    What third-party firewall

    What anti-malware software can be installed.

    What updates you trying to install?
    What error do you get everything when trying to install updates?

    In addition to the information required:

    How to view the log of update windows

    Click Start, and then click Run.

    in the Open box, type%windir%\windowsupdate.log

    and then click ok.

    Scroll down to the last entries find the error codes associated with the last attempt to download/install.

    start at the bottom and work your way up a section that indicates an ERROR, WARNING or FATAL.

    If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.

    on the other hand, you can find the error code and other suggestions by searching the forum.

    Also check the windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

    This may even provide clues as to why the update failed.

    How to read the windowsupdate.log file:

    http://support.Microsoft.com/?kbid=902093

  • Cannot download the security updates in windows xp

    Windows XP issue - I have several times notice that security updates are available, but after going through the movements SEVERAL times, always the message automatic updates that "some updates could not be installed".  All seem to be updated for security and there is a list of about 5 or 6 of them.  Frustrated...

    Hi RoseRosey,

    ·         Provide updates failed number of KB.

    ·         What is the error message you received the update failed?

    Follow the suggestions below for a possible solution:

    Step 1: To get the error message code or error of update failed, you can check the update history in sight. Follow the steps below:

    a. click Start, in the search box, type in Update

    b. click on windows Update

    c. click view update history

    d. If a double failure click the update has failed to get the error code and error message.

    Step 2: Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the KB number below:

    http://www.Microsoft.com/downloads and check if the problem is resolved.

    Hope this information helps.

  • Computer crashes and hangs and cannot install the security updates

    Original title: problem with a multi-card driver

    Hi my pc says I have a problem with a multi card driver. I don't know what that means. How to fix it. I have windows 7 and a dell Inspiron 1545. the pc crashes and freezes and it does not accept dates for 64-bit security. Please help thanks

    Hi Lisa,

    Thanks for posting your query on the Microsoft Communities.

    It might be difficult when things don't work the way it should be on your computer. This problem may occur for corrupted or missing drivers or due to conflict of third-party application. However; We will try to refine to see what is causing this problem and try to fix it.

    Please help me with the following information related to this issue:

    1. Do you have a message when you say "a problem with a multi card driver?
    2. When exactly the computer crash or freeze? It is tempting to access a particular application?
    3. Do you mean that you are not able to install updates when you say "he does not accept the security updates"? If so, you receive error message?

    Follow the steps in the following link and check:

    8.1 Windows, Windows 8 or Windows 7 hangs or freezes

    http://support.Microsoft.com/kb/2681286/en-us

    See the section on Windows 7

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    If you are not able to install Windows updates, I suggest to run the Windows Update Troubleshooter

    which will automatically fix some common problems with Windows Update.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Make sure that you install all the latest version of the device of your computer manufacturer site driver update. Consult the following link:

    http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-1545/drivers

    Please respond with the required information and the status of the question to help you further.

  • Error Code 80604004 cannot install Windows security update KB 2296199

    Already tried "Microsoft Fix It" but no problems have been detected

    Hello

    1. what Microsoft 'Fix it' has been run on your machine?

    Follow the steps below and check, if it helps.

    Step 1:

    Disable all security software and try to install the updates.

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Follow the steps in the article below and check if it can help solve the problem.

    You cannot install some programs or updates

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Vista - error message: configuration of updates "step 3 of 3-57% full. Do not turn off your computer. »

    Vista Basic

    As stated above I get this error message and can not do in SafeMode to rstore system dates back to an earlier era.

    I did the system of tapping F8 and tried all offered options of safe mode, but it does not open in any safe mode, just this error message

    I read a lot of forums and other people with a similar problem (but more than 2 years ago!) could be accessed in secure mode or had a Vista system drive which gave a repair option.

    I have neither.  Even the "External recovery Media" disc only allows me to do save and restart.  During the reboot it just goes straight to the error message.

    At the start, I have the option (via F2) for open System Utilities but couldn't see whatever it is in there that I thought might help.

    ALL IDEAS _ SOMEONE PLEASE!

    See you soon

    John

    Hi howeclan,

    To resolve this problem, you need to have the drive of the installed operating system. You can see the following article in the knowledge base: the update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7:http://support.microsoft.com/kb/949358

    You can contact the manufacturer of the computer to the disk, or you can also contact a store of assistive technology.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Vista - cannot install the Office updates

    I got 12 updates for MS Office 2007 that will not be installed.  I know it referred to a security screwed up in the registry.  because all errors are connected to the msg on registry.  I had this same problem with XP Pro, but I can't find the Vista hotfix for this problem.

    Is this relevant to your question?

    http://support.Microsoft.com/kb/2258121

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Cannot install the security update

    kb973565 update of security guard gives me error 800130100 I need signature How do I do it

    Error codes are normally 8 digits.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/971058

    How to reset the Windows Update components?

    http://www.Microsoft.com/downloads/en/default.aspx

    Also, try to put the KB numbers in the search at the above link > then download them manually.

    If the above does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • Cannot install the security updates two, KB2479628 and KB24855376

    Window 7 32 bit, Toshiba Satellite L350D, have 2 updates security who refuse to install, KB2479628 and KB24855376, have tried the search found no answer. No change on my computer, open use F - Secure viras check and firewall

    Hi rivercrouchman,

    Please let us know the error returned when you try to install the updates.

    Also, please see the article after some troubleshooting for your question:

    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Vista - cannot install KB977304 KB979906 & updates

    I'm running an Acer Aspire and have two Windows downloads.  I am running Microsoft Windows 8 and both to the bottom of charges will be low no load.

    KB977304 and KB979906.  This has happened in more than a month, can someone tell me what I should do or do I just ignore and hid these updates.  Then continue to default.

    There are no Microsoft Windows 8.

    For update problems:

    http://www.Microsoft.com/downloads/en/default.aspx

    Put the KB numbers in the search at the above link > download them manually.

    If this does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • I have windows vista, cannot open the windows updates, or accounts of users, the window starts to open, then disappears.

    I have webroot antivirus, uninstall expired Norton antivirus, no difference.

    Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

    5 steps to help protect your new computer before going online
         http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

    Other useful references include:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • KB2631813 cannot install the security update

    Given error code = 0 x 80070008.

    Anyone has any idea why?

    Please try this... show the hidden files, folders and system files

    http://www.bleepingcomputer.com/tutorials/tutorial62.html#WinXP

    Windows Explorer using [start > all programs > Accessories > Windows]

    Explore], navigate to the WINDOWS\SoftwareDistribution folder

    Open the download folder

    Remove * content * all of the download folder

    Now, open the EventCache

    Remove * content * all of the EventCache folder

    Close Windows Explorer

    Initiate a manual visit to Windows Update

    If the error code reappears, then open the WindowsUpdate.log located

    in the directory WINDOWS [folder]

    Copy & paste the last 40 lines or so of the journal in your answer, please.

    UTC/GMT is 12:41 Thursday, January 19, 2012

Maybe you are looking for