Visual Studio / Oracle configured with local and remote database

Similar Questions

• Changes of data type of column between the local and remote database

  Please point me the proper documentation, so I can understand what is happening.and how to solve the problem in the short term until we can change the database character set to match the remote database.

  Details:

  Remote database: set of 12 c CARS characters AL32UTF8

  Database local 11g 11.2.0.4 as UTF8 character.

  CREATE TABLE local_table_t AS (SELECT NAME FROM reference_table_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 byte), it creates this column in local_table_t as varchar2 (30 bytes)

  CREATE TABLE local_table2_t AS (SELECT NAME FROM reference_table2_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 char), it creates this column in local_table_t as varchar2 (30 char)

  This same problem also happens with views materialized from the remotedb.

  Thank you

  Dave.

  Found note size double or triple column when using (materialized) views / DEC in a db AL32UTF8 and the dblink pointing to a non-AL32UTF8 db (or vice versa). (Doc ID 1592514.1)

  that answers my question.

  Dave.

• How to configure the local and logging remotely using the host profiles, not with advance options

  Help, please

  Hello

  Local and remote syslog feature can be configured for a cluster of similar hosts using the host profiles.

  For more information, see guide installation and Set Up Syslog of the section of the Interface of host profiles in vSphere Installation.

  Connect the Server vCenter by using the vSphere Client.

  Click home.

  Under the administration section, click host profiles.

  Create a new profile or modify an existing profile.

  In the Edit Profile dialog box, set one or more of the five configuration options.

  If you configured using esxcli or advanced syslog configuration options and this has captured a host of reference, 5 configuration options are already visible in the Advanced Configuration option section.

  If syslog has not been previously configured, right-click the section of Advanced Configuration options and add a profile for each of the five configuration options.

  Save the profile and assign it to the hosts.

  For more information please see the documentation Center: (Documentation Centre of vSphere 5.5 )

• compatibility of Windows 7 Home Premium with Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012.

  Hi, I'm going to buy a new laptop in which I get Windows 7 Home Premium. I'm going to use MS Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012. I'll use the other tools of development also. I just want to know fact these races of software in this operating system.

  It's the operating system have a compatibility issue with these software or other tools of development.

  Best place to look is the MS site for these products and consider the requirements specified

• Local and remote to the same virtual machine replication?

  Is it possible to configure replication for a virtual machine to replicate locally and remotely?

  For example:

  ServerA is my server I need to replicate.

  I set up replication for this VM ServerA to storage replicated in the same site (local)

  I opened the replication again for ServerA VM and I can only see/manage this replication.

  I would like to reproduce ServerA VM offisite in a remote cluster of VCenter for DR purposes.

  
  

  Is this possible? What I am doing wrong?

  same source VM cannot be replicated on the two sites with vSphere replication targets.

  If you use replication level storage table between the source to the target and the second replication, you use the replication of vSphere, it would be a different story.

• What version of Visual studio is compatible with windows7homebasic

  What version of Visual studio is compatible with windows7homebasic

  No. but you can install Virtual PC/Windows XP mode or an alternative like Sun's VirtualBox and a copy of Windows XP and run it in a virtual machine. You must upgrade to Windows 7 Professional or ultimate edition to use Windows Virtual PC with Windows XP Mode.

  Visual Studio 2012 and 2010 versions are fully compatible with Windows 7.

  With regard to older versions, see the following:

  Windows 7 of compatibility for Microsoft VisualStudio 2008... Windows7 compatibility for Microsoft VisualStudio 2005...

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• Local and remote server reversed in CS5

  I've just upgraded to Dreamweaver CS5 of CS3. I usually download files from local to a remote server by clicking on the button "expand to display local and remote sites" and drag the file on the local server to the file on the remote server. In CS3, the local server is on the left and the remote server has been right in the expanded view. In CS5, it is reversed, with the local server on the right and the remote server on the left. Recently I accidentally did drag a file to the remote server on the local server, crush a lot of work, I'd just do it, because I was used to the servers being on opposite sides. Very annoying, to say the least.

  Anyone know why they did this way in CS5? Is it possible to move the view so that the local server is on the left and the remote control is on the right in the expanded view?

  Hello Sarah,.

  You can change locals and remote to your wish

  On Windows:

  (1) go to the button Edit on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  On Mac OS

  1) go to Dreamweaver on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  I enclose the snapshot of the Preferences dialog box with the circle where you need to work

  

• Time zone - local and remote server are different

  Hello

  DW CS4.

  My computer and I are in PST and my host is in MST.  When a file is transferred to the remote server, the server gives the timestamp of the local MST.  By example, if I save a file at 5:30, my time and my transfer it immediately, on the remote server it will show 06:30 p.

  QUESTION: This time zone difference will create a problem for DW when turning or synchronization?  FileZilla has an adjustment to account for the difference, but I don't see a framework like that in DW.

  Thank you.

  John

  DW synchronizes local and remote filestamps with precision in different time zones via an XML file: dwsync.xml in a folder hidden _notes.

  It seems to work well most of the time (and you do not normally need to worry) that problems sometimes arise if dwsync.xml files is corrupt, but if you delete it, DW will be re - build it.

  See here for more information:

  Synchronize the files on your sites the remote and

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7EA 4a.html

  The problems of synchronization in Dreamweaver CS4

  http://kb2.Adobe.com/CPS/405/kb405835.html

• Microsoft Visual Studio has encountered a problem and needs to close

  When I am trying to edit a template in Visual Studio and I go to GroupLevel1Style > FieldCaptionStyle, and then click borders and pour the tab, the following error message displays "Microsoft Visual Studio has encountered a problem and needs to close", then Visual Studio closes and opens again.

  If anyone can help, it is a known bug in Visual Studio?  I looked on the Microsoft site in a certain way to contact Microsoft but am at a loss.  If you do not know the answer to the problem, can you point me in the direction of a useful contact?

  Using Visual Studio 2010, running on Windows 8.

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When you expand to show the local and remote sites in DW CS6 how local to be left?

  When you expand to show the local and remote sites in the previous version of DW, the type of files (local or remote) selected when you see do not both, automatically came on the left.  I liked local when I'm editing and when I'm ready to download I expand to see the two premises remotely.  Before, the one you selected, in my local case, was always displayed on the left.  In CS6 when I local selected before I develop, the local is now right and distance on the left. For me, this is not correct.  I find that having local on the works of best left to me as reading, left right, I want the room on the LEFT, so I put the update on the left of the remote control on the right.

  in DW CS6-> How to get the local to be on the left?

  Edit > Preferences > Site

  Change the right to the left on the top.

• Hierarchical WITH query/START / remote database error

  Running: EE 10.1.0.4.0 - 64 bit
  Remote DB: EE 11.1.0.6.0 - 64 bit Production
  
  By train:
  < PRE >
  WITH
  Moo
  AS
  (
  SELECT
  1
  Of
  Dual@EPO11_Link A
  CONNECT
  LEVEL = 1
  START BY
  There ARE (SELECT * FROM Dual@EPO11_Link B WHERE A.Dummy = B.Dummy)
  )
  SELECT
  *
  Of
  Moo;
  < / PRE >
  
  How to get:
  ORA-00904: "A3". "" $nso_col_1 ": invalid identifier
  ORA-02063: preceding the line of EPO11_LINK
  00904, 00000 - '% s: invalid identifier '.
  * Cause:
  * Action:
  
  -Request of the CTE works well on its own.
  
  -remove the @ to the first Dual@EPO11_Link works.
  
  -remove the @ to the second Dual@EPO11_Link errors:
  ORA-02016: cannot use a subquery in a START WITH on a remote database
  02016 00000 - 'impossible to use a subquery in a WITH DEPARTURE on a remote database'
  * Cause:
  * Action:
  Error on line: column 10:24
  
  -Remove the START WITH clause works.
  -Change of START WITH '=' on 'IN' clause, works.
  -Changing the START WITH to EXISTS (SELECT * FROM B Dual@EPO11_Link WHERE A.Dummy = B.Dummy) translates into:
  ORA-00904: "A3". "" DUMMY ": invalid identifier
  ORA-02063: preceding the line of EPO11_LINK
  00904, 00000 - '% s: invalid identifier '.
  * Cause:
  * Action:
  
  Am I missing something here?
  
  Published by: Brian Tkatch on January 19, 2012 13:27

  Although / * + MATERIALIZE * / is fairly commonly used it is not documented suspicion. You can also try to / * + DRIVING_SITE () * / http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements006.htm#SQLRF50704

• Zend 6.1.0 2012 DB local and remote configuration Windows

  I've installed Zend Server 6.1.0 (PHP 5.4.16 - Apache 2.2.22) on Win 2012 64 bit server. I need to connect to a local Oracle 12 c (64-bit) server and a Remote Oracle DB.

  Zend Server already contains the client libraries (oraocci11.dll, oraociei11.dll, orannzsbb11.dll, orasql11.dll) Oracle and I am able to connect to the local Oracle DB and the remote, but only by using the full connect identifier in the PHP script, for example

  $tns = "(DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = XXX0001)(PORT = 1521))
  (CONNECT_DATA = (SERVER = DEDICATED) (SID = ORAXXX))) « ;
  $c = oci_connect ("XXXX", "XXXX", $tns);

  What I would like is to go through the tnsnames.ora file. I tried to install the complete Oracle 32-bit client and also the instant client for 32-bit, but I couldn't get PHP through the tnsnames.ora. I've set the PATH variable to contain the client libraries at the front and also tried to set TNS_ADMIN env var, but I wasn't able to make PHP see the tnsnames.ora.

  Do you know how can I set things up to make it work?

  Thank you!

  I solved this. It was a very trivial problem, I thought that connecting and in return, the new environment variable arise, instead a full server reboot is required to see the new env var (I set ORACLE_HOME). Very stupid problem, but I'm glad I solved it :-) Always look at phpinfo() to see what vars end PHP.

• With the help of local and remote servers

  Can someone point me to somewhere that explains the use of servers the remote and? I have set up a local server (using XAMPP) and also a site remote dev on my hosting server. I'm assuming that I can choose to download files on the local or remote as I wish (local test and publish remotely). Is this the case? Currently, I can't download files on the remote server. When I "put", the files just to go to the location of the test (localhost).

  Any ideas?

  You test locally on XAMPP (or similar) and when ready, download on your remote server. If using could not upload to the remote server, it means that you have not set the remote info in your site definition.

  The only thing you can not download through Put is the database. You must create a database with the same name on your remote server. If you have data that you want to download, you can use phpMyAdmin to export to a .sql file. Then use your remote version of phpMyAdmin to import the data by accessing the file .sql on your local hard drive.

• Problem with XControl and remote debugging

  Can you make a connection of remote debugging to an EXE or DLL that uses an XControl?  So far, my experiences would indicate the answer is no, but I find that surprising and have seen no earlier mention of it in bug reports or in the forums.  When trying to connect to the DLL with XControl, I get the error 'fatal error occurred during the operation, close the connection' dialog box.  I'm just connection of the local machine, not on the network.

  My real application is a rather elaborate DLL that is called from a Visual Studio 2008 C++ application and launches the LV panels dynamically.  I realized that my DLLs that include panels with XControls do not allow debugging remotely for you connect while dll without XControls works very well.  It is the only difference between the two projects.

  I've simplified it to a simple test program that merely updates an indicator in a timed loop.  I created two versions of the VI, which updates a digital single and the other who updates an XControl (which itself is a simple digital-only model change XControl of dropping a digital indicator on the FP of façade and update a local variable to it in the event of modification of data).  Then I built these two screws in the exe files and tried to make a debugging connection to each after the launch of the EXE.  Of course, the application with the XControl Gets the above mentioned error dialog box.  Any ideas on why this is happening?

  I have attached the sample project that generates the two EXEs.  One is called debugging with XControl Test and another test of debugging without XControl.  My worm. LV is 9.0f2.  Here's the very simple diagram showing the problem:

  

  I saw that this problem has been fixed in LV 2010 SP1:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/12560

  Look for the CAR ID 238566 to the fixed bug list.

• build a Visual Studio C++ 2008 .dll file and use it in labview

  Hello

  A few days I tried to create a .dll with c code file and use it with a call library function node in LabView. But I could never do it with success. I use Visual Studio 2008 and labview 8.6.

  I had a look at some tutorials, but they were written for different versions of Visual Studio. And because I'm a newbie to Visual Studio, it was difficult for me to do in another version the turtrial is written for.  However, I have a lot of experience in programming c for processor atmel (AVR Studio).

  Is there someone who could help me step by step hollow Visual Studio C++ 2008 and later versions also help me configure my call library function node?

  I'm form Switzerland, my English may have a few errors. Sorry for that.

  What I've done so far:

  * I opened VisualStudio 2008 and created a new project.

  * For this I used the model ' class library ' (because I live in Switzerland, I have German versions of visual studio, and labview. So, probably, it is not called exactly "class library" in the English version)

  * The project is created and I can insert my functions.

  * but here I have some difficulties: in my tutorials, they say that a function should be defined as follows:

  type name (arguments) WINAPI

  {

  code

  }

  for example

  unsigned int WINAPI multiply (unsigned char, unsigned char b).

  {

  unsigned int c;

  c = a * b;

  return c;

  }

  but when I try to compile the project I get the errormessage:

  SyntaxError: missing; prior to "multiply".

  * When I remove WINAPI, it creates the dll file

  * but when I try to open this dll with a "call library function node" in labview, I get an errormessage labview, that my multiply function is not found in the dll.

  I'd be happy if someone could help me with this.

  You need adorn your statements with extern "C". LabVIEW manages only the C dll; It cannot manage the C++ dll, which is what you will get if you do not have extern "C". I do not understand why you are trying to use 'stdcall '. For a normal DLL just stick to C-calls.

  The link provided by Red rooster is for Visual C++ 6, which is a very old version. I suggest you look at instead, because it deals with Visual Studio 2005.