VM storage in vCenter alarms

Similar Questions

• Unable to collect vCenter alarms/tasks/events

  Hello

  I have a journal Insight 3.0 and installing vCenter Server 5.5 U2b environment.

  I created a clone of Read-Only and add the following permissions:

  Global.Licenses

  Global.SetCustomField

  Host.Config.AdvancedConfig

  Host.Config.NetService

  Host.Config.Network

  Host.Config.Settings

  System.Anonymous

  System.Read

  System.View

  This role is spread from data centers (upper level) and connected to an AD user account.

  When I integrate Log Insight with my any snippet vCenter and it is saved correctly in the Administration tab for the particular Server vCenter (collect vCenter Server events, tasks and messages is checked), but nothing ever appears in vCenter alarms / tasks despite the fact that there are a lot of things for at least a month back. I use a custom range, which should be enough.

  I tried the same thing in our development environment with an administrator privileged account and it works fine, I get a lot of vCenter alarms and whatnot in the dashboards. However, I want to use the least permissions if possible.

  Am I missing a permission/privilege? Is there a log file I can check for errors/warnings?

  Can be set to RESPOND.

• vCenter alarms & SNMP Trap

  Gang-

  I try to get my vCenter alarms to send traps SNMP for SNMP Manager/receiver so we can automatically open the service tickets based on certain types of vCenter alarms.  I have loaded MIB and OID translate for VMWARE-VC-EVENT-MIBs.

  Everything goes well and using the free utility TrapReceiver I'm able to test receive interrupts.

  Here's my problem...

  I don't know how vCenter is differentiate the name of alarm vCenter in trap data.  Some vCenter alarms/traps, I want my ticket system to open lower or higher priority tickets, so I need to figure out how vCenter translated the alarm at the "vmwVpxdObjValue" into the trap.  Unfortunately I can't find any information on how to translate this value and I don't want to wait for all my events to trigger production, just to get a sample, so I don't know what to expect.

  Any ideas?

  VMWARE-VC-EVENT-MIB

  vpxdAlarmInfo

  notification

  OID - 1.3.6.1.4.1.6876.4.3.0.203

  Thank you

  Well shoot - that isn't quite right either.

  Seems that if it is a fault of the alarm system, the TRAP will leverage the value of $alarm.extensiondata.info.systemname as the beginning of the vmwVpxdObjectValue data.

  If it is a user/custom alarm, it seems to refer to the value of $alarm.extensiondata.info.name.

  I have to have a script that includes both.

• export and import vcenter alarms

  Hello

  I'm working on the migration of all the alarms configured production vcenter (running on 5.1) to another (race with 5.5). Y at - it a medium CLI script or the power to perform the same task.

  your quick response will be highly appreciated. I need this bad.

  Please see the resources below

  VMware KB: Restoration and copy of the Server vCenter alarms

  Download | stripeyfish

  Import/export script alarms between VC or synchronize alarms between 2 virtual centres

• I want alarms to stay there in vcenter alarms tab until I manually acknowledge vcenter 5.1, even though the issue has been resolved. Is this possible?

  I want alarms to stay there in vcenter alarms tab until I manually acknowledge vcenter 5.1, even though the issue has been resolved. Is this possible?

  I think that it is possible for costom alarm unless if someone this cleat. but for some the alarm settings by default, it will be deleted once the threshold/connection back to normal. to do this, you need to change the alarm and the need to remove the condition that meet as nornmal (means, for this default it will multiple alarm (one is green to red or another is red to green...) so remove settings from red to green. so he will be there until you ack and reset it)

• 'Command' in vCenter alarm

  Hi all

  We are recently receving bunch of vCPU alerts. We want to take these courses of the time period. So, I want to save the info to a database alert.

  I came to know the "run command" in vCenter alarm, which is great. I am able to run the powershell script example using that.

  I wonder if someone can help me on passing the parameters (green, red, metric, vCenterServer name etc.) script powershell is on my vCenterServer. I don't know that there should be a way. Any thoughts or ideas?

  My goal is to send the alarm information to the powershell script and then insert these data in databases so that we can have a story and that you can query easily.

  Thus, whenever there is a generated vCPU alert, powershell script will be executed and insert database values.

  Please let me know if there is a better way to do it.

  Thanks in advance,

  Rajesh.

  I think that the reasoning behind this folderpath and set the AppData environment variables is explained by Carter in step 1.

  These alarm scripts will run under the account of the vCenter Service service, and does not the vCenter uses environment variables.

  The non-existent folder is just a new folder you have to create yourself.

  Can you try to add a Start-Transcript (beginning of the script) and Stop-Transcript (end of the script) to your script?

  This will give you a log of what the script does.

• vCenter alarm action script to start a workflow vRO with curl

  I have a script that I use on the vCenter servers to launch when an alarm is triggered, and this script will use curl to start a workflow vRO.  Everything has been awesome to work until I've finished upgrading all servers in vRO to 7.x now I get this error

  Server: ~ # /root/scripts/alarmaction.sh

  * Subject to connect() to x.x.x.x port 8281 (#0)

  * Try the connected.. x.x.x.x.

  * Connected to the port x.x.x.x (x.x.x.x) 8281 (#0)

  * successfully together certificate verify locations:

  * CAfile: /etc/ssl/certs/root64.pem

  CApath: / etc/ssl/certs /.

  * SSLv3, TLS, Hello handshake customer (1):

  } [data not shown]

  * error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown

  Closing connection #0

  curl: (35): 140770 CF error: SSL routines: SSL23_GET_SERVER_HELLO:unknown

  OK, so an algorithm of encryption or something got deleted in version 7.x.  Can someone else me one that exactly and how do I add the encryption required to connect again?

  Here's my alarmAction.sh in case anyone can use something like this

  #! / bin/sh

  {vcAlarm()}

  # Create variables to store values consumed by Invoke-RestMethod command.

  Server = "x.x.x.x"

  url = » https://$server:8281/VCO/API/workflows/408d8e4d-1a95-46A4-bca6-efa3c24f81bb/executions "

  # The cmdlet runs the URL encoding.

  Cat >./alarmProps.txt < < EOF

  " <-xmlns = execution context" http://www.VMware.com/VCO "> "

  < Parameters >

  < parameter type = 'string', name = 'VMWARE_ALARM_NAME' scope = 'local' >

  < string >$ {VMWARE_ALARM_NAME} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_ID' scope = 'local' >

  < string >$ {VMWARE_ALARM_ID} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_TARGET_NAME' scope = 'local' >

  < string >$ {VMWARE_ALARM_TARGET_NAME} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_TARGET_ID' scope = 'local' >

  < string >$ {VMWARE_ALARM_TARGET_ID} < / string >

  < / parameter >

  < type parameter is 'chain' name is 'VMWARE_ALARM_OLDSTATUS' scope = 'local' >

  < string >$ {VMWARE_ALARM_OLDSTATUS} < / string >

  < / parameter >

  < type parameter is 'chain' name is 'VMWARE_ALARM_NEWSTATUS' scope = 'local' >

  < string >$ {VMWARE_ALARM_NEWSTATUS} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_TRIGGERINGSUMMARY' scope = 'local' >

  < string >$ {VMWARE_ALARM_TRIGGERINGSUMMARY} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_DECLARINGSUMMARY' scope = 'local' >

  < string >$ {VMWARE_ALARM_DECLARINGSUMMARY} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_ALARMVALUE' scope = 'local' >

  < string >$ {VMWARE_ALARM_ALARMVALUE} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENTDESCRIPTION' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENTDESCRIPTION} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_DESCRIPTION' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_DESCRIPTION} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_USERNAME' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_USERNAME} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_DATACENTER' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_DATACENTER} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_COMPUTERESOURCE' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_COMPUTERESOURCE} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_HOST' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_HOST} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_VM' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_VM} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_NETWORK' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_NETWORK} < / string >

  < / parameter >

  < parameter type = 'string', name = 'VMWARE_ALARM_EVENT_DATASTORE' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_DATASTORE} < / string >

  < / parameter >

  < type parameter is 'chain' name is 'VMWARE_ALARM_EVENT_DVS' scope = 'local' >

  < string >$ {VMWARE_ALARM_EVENT_DVS} < / string >

  < / parameter >

  < / Parameter >

  < / execution context >

  EXPRESSIONS OF FOLKLORE

  # Now run the Invoke-RestMethod command with all the variables in place.

  curl-s-i-l - v--/root/scripts/cert/vco.key--/root/scripts/cert/vco.crt--cacert cert /root/scripts/cert/root64.cer - H - key "accept: application/xml ' h ' content-type: application / xml; Charset = UTF-8 "h 'permission = 'Base base64pass' ' u" user: password "x POST $url d @alarmProps.txt"

  }

  vcAlarm

  RM./alarmProps.txt f

  In vRO 7.0.1 Protocol TLSv1 is disabled by default. Could you change the sslEnabledProtocols property in the /etc/vco/app-server/server.xml file to "TLSv1, 1, TLSv1.2 ' "TLSv1, TLSv1.1, TLSv1.2", reboot and try again with curl vco-Server service?

• vCenter alarm - which color medium gray?

  -Health of storage has changed from gray to yellow-

  
  

  Why is it not from green to yellow?
  

  Hello

  The first alarm event will depart from grey - which means that it is the first time. or there is no before trigger registered for this event

  This KB should answer your question more clearly.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1029924

  Thank you
  Avinash

• Script to export VCenter alarms to analyze.

  Does anyone know of a script, or how an exportable report of your alarms that are used in your script Vcenter?

  Want to know what thresholds have been established.

  For example, is sent by e-mail or SMNP.

  Help, please.

  James

  Hi James,

  Glad it helped

  Please select my comment as replied so people can use it!

  S

• Storage vmotion vcenter

  Hello

  Is it possible to storage vmotion the vcenter server.

  Details:

  VCenter server 4.1 on windows 2008 R2

  Database Seperetae on windows 2003 Server

  The server vcenter on windows 2008 R2 server must be svmotioned. I don't have a server database storage vmotion at this time.

  If this is possible, how it safely is appreciated.

  Thank you

  non - storage vmotion is made with vm - in fact if you were to power down the virtual machine of vcenter then you would not be able to vmoyion or storage vmotion - Webcam live

• VCenter alarms

  My fault, I removed the lun without deleting the data store in the virtual machines. And now, my sensors are going crazy.

  I made a new analysis of data on my cluster warehouses but how vcenter to alarm.

  I disabled the alarm actions and responsive too.

  Help, please

  Thank you

  RJ

  can you recognize the alarm and then back to green?

• improvements of Storage Vmotion vCenter 4

  Storage Vmotion improvements in vCenter 4 include a new change block tracking feature that can really improve this feature. I have a few vmotions really big storage to perform.

  My question is, these part improvement in vCenter 4, or VMS must be level hardware version 7 to take advantage of theses improvements.

  I think that it is for vCenter and not based on the version of virtual machine.

  Point will be awarded.

  Thank you

  I think that it is for vCenter and not based on the version of virtual machine.

  Is no not part of vCenter, is a part of ESX, vCenter MANAGES the entire process, it's not ACTUALLY the process.

  a.p. has a point, that it is part of the equipment of the V7, but he points out as Troy STILL won't make a difference for sVmotion.

  In all these improvements are just a part of what ESX 4 is all about, and I have ALWAYS said (do not take into account or not) 64-bit has EVERYTHING to do with these improvements, and less to do with the code changes.  I think that 64-bit made these changes possible, and that is what has helped vSphere / ESX enormously.

• vCenter alarms and calling a powershell script

  OK, I'm missing something or I'm doing something incredibly stupid.

  I created a simple powershell script that starts a pre-defined VM. I tested it in PowerGUI, it works fine, no problems so far.

  Now all I want to do is set an alarm to ANOTHER VM of vCenter, such that if the virtual machine goes down (power of the off state), the script above is called and "failover" VM is started.

  I set up the alarm with a "run a script" action, the script is: "C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe C:\SCRIPTS\FAILOVER.ps1" (including the quotes).

  And you guessed it: the script does not run. I'm sure that it doesn't, because the part of the script creates a log file, and this file is not creaed (it IS created when I run the PowerGUI script).

  What I am doing wrong? How can I get the alarm to hit my script?

  Thank you!

  I've never managed to run a PS script this way or the other.

  But I found a workaround.

  You can start your PS script indirectly via a BAT or CMD file.

  That's what I set in the value field

  c:\windows\system32\cmd.exe /c c:\Scripts\alarmscript.bat
  

  And the BAT file contained this

  C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsolefile "C:\Program Files\VMware\Infrastructure\VIToolkitForWindows\vim.psc1" -Command C:\Scripts\Test-Alarm.ps1
  

  In the example script I used

  Get-VIToolkitVersion | Out-File "C:\Scripts\PSOut.log" -Append
  Get-PSSnapin | Out-File  "C:\Scripts\PSOut.log" -Append
  

• Registry storage in vCenter provider 5

  I'm under vCenter 5 and HP-left p4300 SAN. I would record the HP P4000 SAN VASA provider. I can't find any instructions on how to do it.  I don't know what to enter for this...

  

  Hello.

  Info is in this document http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02500691/c02500691.pdf (page 19)

  But you must first install the Insight Control Sytems for vcenter and be run on a hp systems insite Manager server.

  So basically follow the document or other he speaks.

  See you soon

• Mystery vCenter alarm

  I have a cluster of 5 servers, one of them has an alarm on that I can't find, it isn't under the alarms of the host, the Cluster, DC or the server.  Any advice as to where I might be able to find the cause of this error?

  have you tried right click "reconfigure for HA?  In addition, the tab alarms for this host, nothing appears?  What tasks and events.

  You can also try to restart the management agents

  > service vmware-vpxa restart

  > service mgmt-vmware restart