Voice control that is not enabled when Siri is disabled.
I bought a new 6 s more a couple of days. Voice command does not work.
Permit of Siri, which worked well. On off Siri, voice command should get activated. But it's not.
Support agent by CAT invited to try to restart the phone. Who has not solved the problem.
Then she asked to reset all the settings. Tried but I had to spend time in new establishing ID touch again and a few other customizations. Who did the trick. But later I changed around some parameters based on my preference... As the parameters of vibration, background app, n assistive touch refresh. I tried Siri. Worked well. Then disabled Siri. And bang... Voice command does not work yet.
Support called this morning. They were asked to try recovery restore.
I decided not to go ahead with the recovery as it would mean downloading all the apps odd 70 I have reset Touch ID and customize all the settings again. A lot of your time. I guess I'll just wait for the next update if there is a difficulty.
Meanwhile, I just noticed that the international option under general settings is missing. The guide of the said user voice control language can be changed there. But the international option itself is missing. I used the option to return on the Web site to connect it as a bug.
Any ideas or pointers? Pls help.
I have the same problem with an iPhone 5 c. He raised ugly head is when the phone has been improved IOS 8.xx 9.2 a few weeks ago. Similar problems have been reported with the introduction of iOS 9 last September, mostly in conjunction with bluetooth function.
Like you, I use my iPhone to do the voice to make calls without Siri. I use a Motorola T225 handsfree speaker. The iPhone and the pair speaker and désapparier correctly. With Siri on, by pressing the call button on the speakerphone, voice dial beep of the iPhone to request a command. Issue a 'Call' name, translates a Siri as voice repeats "Calling" name and so on.
Siri only works when connected to the internet via wi - fi or your cellular data subscription. As you pointed out, without either, Siri does not work and must be shut down before you can make a voice call.
Since iOS 9.2, the iPhone does not respond to the call key bluetooth with voice dialing tone when Siri is off and does not take into account the "Call" command This means that for anyone without a cellular data plan (or outside of cellular range), you are no longer able to make hands-free calls. Apple is to recognize that this is a major problem and could lead to dangerous use of their device.
You have tried many of the suggested corrective action. Reset the network settings, reset all settings, the restorations of iOS and temporarily replace the language setting (it is not clear if the done language reference is the language of the iPhone or Siri, who find themselves in different options under general settings). As you have pointed out the international option went into hiding. Every iOS update results in a large number of settings being changed with a large part of the documentation that was created at the time of your iPhone has manufactured and distributed on the internet, is no longer valid.
I, like you, reluctant to "destroy" a large part of my installs customization and app phones, a temporary solution. Thank you for pointing out that you had done the reset, only to get her back. It seems to me that the iOS Update 9 corrupts a framework. The setting is fixed by doing a reset but once again altered when you turn on a setting or a specific function. This suggests that you can perform recoveries as Apple support says, until the cows come home home.
Tags: iPhone
Similar Questions
-
I receive message on my corner "user not enabled" when I try to read a book from the library. Book is there and I can read on my computer, but not the meal. Can read books purchased on Nook.
Please add me to this exact problem on my Nook - Tim
-
I just uploaded a new site to an existing via filezilla domain. It worked great and my site is up, but I have a problem that does not show when he would be seen in the fake browser Adobe Catalyst. I have a logo in the left corner of the page master. In Muse, he shows that he is in the right place, and when I go to preview, is also in the right place. When I went to live with my Web site, it shows that the logo is off, to the left and not at all in the right place. Any ideas on what I can do to move this and stay in the right place. Everything I have on the master page is prominently in the live version.
Probably, you have a box or empty text box somewhere see this thread for the fix: Bug Muse | Graphics shift randomly, why?
-
"Windows defender is not enabled" when you try to disable startup programs
Original title: "Windows defender"
I would like to disable some programs to run at startup to the top. However whenever I go to the control panel and click on startup programs it tells me that my windows Defender is not enabled. When I try to turn it on nothing happens. Any suggestions as how to solve this problem. Thnx.
Hello
Windows Defender is probaby blocked from running by your AntiVirus so use them to set the
Programs start as you wish.How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured so that it starts automatically when your system
boots and you login. Autoruns shows you the full list of registry and file locations where
applications can configure Auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx===========================================
Refer to this topic for many more excellent tips.
Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Error: hardware acceleration is not enabled when opening Solitaire
After reformatting, I get an error message when I opened solitary, he said hardware acceleration was not turned on but I checked it & its turned upwards completely why my games play badly?
Hello
With the publication of the description, I understand that you have found an error: hardware acceleration is not enabled at the opening of Solitaire on your Windows 7 machine. I will certainly help you get this fixed number.
I suggest you refer to the suggestions of windowsfanny responded on November 3, 2009 in the below mentioned thread and check if this is useful:
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Also, I suggest you to update the video card drivers on the manufacturer's Web site.
Reference:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
All my favorites that are important are in folders and fines. But when I click the menu bookmarks, folders are followed by a list of unwanted bookmarks. These do not appear when I go to "show all bookmarks". Here, the "unsorted bookmarks" folder is empty.
I can delete the bookmarks side one at a time, but it will take ages!
Please can you advise me?
Thank you.Are not the Favorites in the Menu of bookmarks folder?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
-
The column that does not match when comparing two records
Hi all
We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:
Table 1
PK Parent Child Property1 Property2 1 A A1 P1 PR1 2 B B1 P2 oraPR2 3 C C1 P3 SRP Table 2
PK Parent Child Property1 Property2 1 A A1 P1 PR1 2 B B1 P2 PR2 3 C C1 P3 PR4 In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:
PK Column_Mismatch 3 Property2 (this must be the name of the column that does not match) Appreciate the help.
Thank you
Andy
Hi, Andy.
Andy1484 wrote:
Hi all
We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:
Table 1
PK Parent Child Property1 Property2 1 A A1 P1 PR1 2 B B1 P2 oraPR2 3 C C1 P3 PR3 Table 2
PK Parent Child Property1 Property2 1 A A1 P1 PR1 2 B B1 P2 PR2 3 C C1 P3 PR4 In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:
PK Column_Mismatch 3 Property2 (this must be the name of the column that does not match) Appreciate the help.
Thank you
Andy
Why you don't want no matter what exit for pk = 2? Property2 does not correspond either to pk.
What happens if the 2 columns (or more) do not match? The following query would produce a list delimited, such as ' parents; PROPERTY2 '.
WITH got_mismatch AS
(
SELECT pk
, CASE WHEN t1.parent <> t2.parent THEN '; PARENT' END
|| CASE WHEN t1.child <> t2.child THEN '; CHILD ' END
|| CASE WHEN t1.properry1 <> t2.property1 THEN '; PROPERTY1 ' END
|| CASE WHEN t1.properry2 <> t2.property2 THEN '; PROPERTY2 ' END
AS the offset
FROM table_1 t1
JOIN table_2 t2 ON t2.pk = t1.pk
)
SELECT pk
, SUBSTR (incompatibility, 3) AS column_mismatch
OF got_mismatch
WHERE mismatch IS NOT NULL
;
If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.
The query above does not count NULL values as inadequate. If you want that, the same basic approach will work, but you can use DECODE instead of <> to compare columns.
What happens if a pk exist in a table, but not the other? You want an outer join, where I used an inner join above.
-
I searched around for group policy, but no luck.
A reinstall is quite often the fastest way to solve a problem. Your hard drive will be completely erased in the process, it will be necessary to back up your personal files beforehand. An external USB drive is good for this. Also, you will need to reinstall all the applications that came with the computer. If you use the Encrypting File System (EFS), make sure you back up your certificates as well or you will lose access to all your encrypted files - even if saved. (Encrypted files usually appear with names in green).
A "repair install" which does not erase your drive might also be possible, but if you have installed SP2, SP3, IE7 or IE8 you bought your machine, you should read the following article:
"How to perform a Windows XP repair installation, if a later version of Internet Explorer is installed"
<>http://support.Microsoft.com/kb/917964 >HTH,
JW -
get rid of the email in Outbox that does not send when I used the reply and forward.
When I got trouoble replying to email messages went to my Outbox and stayed there. I decided to clean things up so I deleted them. Now, whenever I connect to the computer until get the message at the bottom of the screen it says 1 mailing of 4. There is nothing to send because I deleted everything in the Outbox. How can I get my computer to stop trying to send emails in the Outbox that I deleted. Any help that anyone can give me in this matter would be greatly appreciated. Thanks again. Dolly.
You don't mention your e-mail program. If you use Outlook Express, follow these steps.
Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.
After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
General precautions for Outlook Express:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmNote that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
Compact often as specified above.
And backup often.
Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
Problem: controls and indicators not updated when to open the front panel
Hello
I have a strange problem when I progamatically open the façade of a subvi: for some sub-vis controls and indicators are correctly updated while others are not (ie the controls display the outdated values).
Here, I have created an example that illustrates this. 2 sub-vis are * exactly * the same thing, but only a day watch control when I open it (with the sub - vi previously closed of course).
How is that possible?
What should I do to have the controls implemented to date to the last value of the * last call * when I opened the sub - vi?
-
I recently discovered what may be a bug or a serious error in the Windows 7 search engine, I'm not really sure of that. Heck, it could be just that the options are formulated in a misleading way, and I don't realize. Anyway slice you it, I have no sites indexed on my PC, or what I want, and I get no search results either.
My settings are, AFAIK, set up so that Windows Search will search by file names and content regardless of whether the location of the research is indexed but except if it is indexed it returns no result. As a concrete example, I have a folder with 701 files it contains. Of these 700 more than 400 files contain the letter 'C' in the name of the file. When the folder is indexed, they appear in a search. When the folder is not indexed appear not at all.
So, how to get Windows 7's search in unindexed locations? I rarely use the search engine, in particular because it feels and is that it now seems to be, a massive downgrade on XP, but I still need it from time to time and I prefer not to index my PC just because Windows 7 will not search non indexed sections of my drives as it's a waste of given how little system resources I need to use it.
HM, this is regrettable. Something to try...
Open the Indexing Options Control Panel, choose Advanced Options and click [Rebuild], which is supposed to remove and rebuild the indexes. With the indexing service off, I could imagine that it would remove whatever remains of an index, you can have but not rebuild. Which perhaps honest to the operation 'search the doomed drive already' goodness.
I go through this process when I disabled indexing, and done, I can search and find things. Keep hope; It can work.
-Christmas
-
Num Lock not enabled when starting Windows 8
Hello world
After turning on my system after loading Windows 8, the Num Lock does not automatically start as it is defined in my BIOS. I followed the suggestion given in the forums and changed registry entries for the InitialKeyboardIndicators key in the registry as having a value of 2. It still does not work.
What I've noticed is that if I have sign in Windows 8, then arrested after disconnection, the num lock light will be after restarting my system. However, if I go into the settings and off directly without signing out, NUMLOCK is turned off when I restart my PC.
Any ideas or suggestions would be appreciated.
Thank you.
Michael
Try:
Panel-online equipment and audio =>-online Control Panel Power OptionsUncheck the box (quick start lights). -
On the control screen does not appear when the Blur Blur option Gallery
Running photoshop CC 2015.5
iMac 27 inch end 2012 3.2 Ghz intel Core i5
8 GB 1600 Mhz DDR3 memory
NVIDiA GeForce GTX 675MX 1024 MB graphics card
When I select filter > blur Gallery > and any option to blur the answer does not appear on Control Panel. . Instead, the screen is partially blurred and an arrow that turns into a cursor "Tack +" lights up the screen... It seems not to be a selection of tools which is the ellipse with find @ iris blur and I have no control over the features of blur, as noted in each training video that I can find on the subject...
Please help if you can. ..
Thank you!
the on-screen controls may be hidden
To display / hide: cmd + H
Let us know if that helps.
-
I tried every icon on "my control panel" and nothing I have a discovery tells me how to move my OE or START bar to remove a program that won't be not clear.
I tried every icon on "my control panel" and nothing I have a discovery tells me how to move my OE or START bar to remove a program that won't be not clear.
What is a start bar? The Windows taskbar? What version of Windows are you using?
Try this to remove programs.
Utility Windows Install CleanUp:
http://MajorGeeks.com/Windows_Installer_CleanUp_Utility_d4459.htmlBruce Hagen MS - MVP [Mail]
-
Create a static button that does not move when you slide on several pages.
Is it possible to do? I have a button that directs the user to the top of the document, but it is position moves when you drag on several pages. Is it possible to create something that is entirely static which remains in the same position?
Thank you
It's not a way to do this in DPS. All the elements are linked to the page.
Neil
Maybe you are looking for
-
Restore the option Save as / open with window...
When you save a file of the interwebs, I used to give the open with option / Save as with a box to check to "do it every time. I clicked accidentally box when recording as it does so now present every time. I'm sure it's pretty simple and feel really
-
Satellite P200-1EE - update of HD-DVD Player question
Hard drive crashed a few days ago.Re-installed everything using the recovery disk.More than 200 updates to vista. TEMPRO installed after all updates for Vista.The problem is the update of the HD DVD of 2007 = callelua.asp? ID = 60624.Returned as an e
-
Satellite P300 - questions of recognition of load and battery
I have two laptops P300, a PSPCCA-0C502H and a PSPCCA-05Y01Y. One had a hard life and the battery is dead. It was still used for a long time after that, while being connected at all times. The 05Y01Y was mine and the battery eventually would last onl
-
My direct mail is sorted in alphabetical order by family name, but now, when I add a new contact, it is positioned at the top of the list instead being placed in the right place alphabetical. How to load the list of contacts to organize all contacts
-
computer screen is upside down?
When we woke up this morning and on the computer, everything was upside down. Yes, it still works, but as now I type, but if you look at all is displayed upside down... you can play a game, but you must activate it so you are looking @ it backwards..