Volume equalizer?

Volume is uneven, some tracks are noisy (current dance floors, contemporary rock, etc.) while others are lower (more old analogue recordings ala pre-1990.) Oldies, etc...)

Is there a function Compressor/Limiter that will increase the volume of securities less and turn down the hottest volume of titles, so there's a balance of consistency?

I noticed that there were several messages about SanDisk low volume in general. They have dealt with the issue?

To be honest, the volume at its peak level is more than enough when we are talking about headphones. It's when you plug the drive on your Hi-Fi, that volume is more insufficient.

Any help is appreciated.

If they are .mp3 files MP3Gain allows you to normalize the volume, but it does not work on .wma, .flac, ogg or .wav.

SanDisk music players do not have a low volume; although on the contrary actually... unless you live in Europe or otherwise to give Europe in your region on the player. The EU has a ceiling of the defined benefits that all manufacturers of audio devices must meet in order to be able to sell their products in these countries.

That being said, if you live in Europe there is a way around this limitation of volume.

Eager to use this drive with a stereo system or large speakers, however, you must understand that this puts milli-watts of power. Enough for headsets or some phones, but it has not designed or equipped to do much else. It may need assistance in the form of speakers, a socket AUX in on your Hi-Fi (in order to tap into the amplifier it), or a headphone amp.

Tags: SanDisk Sansa

Similar Questions

  • Volume Equalizer several tracks

    What is Soundbooth capable of Equalization of many music titles both?  When I say many, I mean that I have about 60 pieces of music that have been recording on cassettes and old records.  I want to burn CDs, but want the volume the same for each track.  Is there a limit as to how many titles he can handle before crashing?

    Or is there a better way to adjust the volume of each track?

    Thank you

    Oops

    Use the "Match Volume" task to multiple files with the same relative volume.  You can select a file as the target volume for the rest, or set to a particular level of dB, with a few additional options to set the sound intensity perceived and much more still.

  • p108tx: disable the Equalization of the Volume / Compression? Help?

    I love that I was given an alternative Panel with Realtek on windows 10 Beats, but it seems be identified by HP beats 'Legalization of the Volume' function with no way to turn it off... (Play two tracks, a low and a high, itll them equalize and make very loud low sounds, which is very bad, on Panel of beats, pass 'Music' turns off 'Voice' it but then too too ruined sounds.)

    TL; DR:

    Is there a way to disable the Volume equalization / Compression?

    Thanks in advance.

    @Lemagex,

    Hello and thank you very much for posting on the HP support forums.  The only thing I can think of dealing with the beats of the driver that is still hanging on components is to go into the Device Manager and turn off then uninstall the audio drivers and then analyze the updates and see if it replaces it with a generic windows.

    The audio beats is integrated into the audio controller and can not be removed completely, however.

    One thing that might work and might be a little annoying because you need to save all your data and start again runs a stand alone install Windows 10.

    Here is a link that will help you with that.

    Download Windows 10

    Please let me know how things are going.  Thanks again for posting and have a great day.

  • Pavilion 15-p027tx: Audio volume too low on Pavilion 15-p027tx with beatsaudio

    The laptop comes with a beatsaudio system.

    Even if the volme is at its maximum, it is still too low.

    I tried reading devices > Speaker > properties > and then the enhancements tab is missing, so I can't change volume equalization.

    Help, please.

    Hi @MayurJoshi,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p027tx and the game its too low. Here is a document on the sounds troubleshooting.

    Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

    1. right click the speaker icon in the lower right corner of your time.
    2. click on playback devices.
    3. click on speakers/headphones.
    4. click on properties.
    5. click on the Advanced tab in the Properties window.
    6. change the default menu Format in the highest quality.
    7. apply properties.
    8. click OK to close the Properties window.
    9. click OK to close the playback devices.

    What browser do you use? I would check to make sure that the browser is up-to-date.

    This occurs during playback of a DVD or CD?

    Make sure that you don't have other things running in the back when a video plays as open Windows Explorer perform streaming.

    Hope that helps you with the sound.

    Thank you.

  • IDT Audio (bat) lack tab improvements to Windows Sound (sound check)

    Hi all

    I own a HP Pavilion DV6-6C57NR with Beats Audio for more than a year. A Couple of weeks, my computer crashed in a big way so I reinstalled Windows 7. I realized all my drivers and my sound works fine (except that [Fn] + B is not enable and disable the beats). The only problem is that I have more access to the improvements to Windows Sound tab

    I use the Volume equalizer in the strong rooms all the time. Any help to get it back would be appreciated.

    Sincerely,

    H

    Hello

    Whether or not you have the "Improvements" tab is down to the driver audio especially is installed - some allow this functionality and some do not.

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55094.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When finished, restart the laptop.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, check if you have the tab improvements back.

    Note:  If you want the fn + combination B works correctly, you need to download and install the HP Quick Launch bar from the link below.

    HP Quick Launch buttons.

    Once the installation is complete, restart the computer before checking it in.

    Kind regards

    DP - K

  • Satellite L50-B943 - Audio problem Jack Quality

    So, I recently used this laptop and every time I plug in my headphones quality goes big and hard at something just plain bad.

    I tried to use my headphones on other devices and they work fine.
    This is the first time I met this problem as well.

    Your responses are much appreciated. Thank you!

    Hello

    The laptop supports DTS® sound.
    Its DTS Studio is a suite of enrichment premium sound available on some Toshiba laptops, which provides a sound immersive surround, outstanding bass reproduction, improved dialogue and smart volume Equalization and maximization of all multimedia content.

    But to get the right sound, that you must change the DTS from the inside to the outside.
    Please be aware of this!

  • Sony Vaio VGN-NW120J computer laptop speakers not working do not... However, I can hear low sound when I connect external speakers or headphones

    In fact it has window vista family premium as window by default, but I changed it to home premium to Windows 7. But the speaker does not work (no), but when I connect the headphones the sound comes with a very low volume. So what could be the problem and how can I solve it.

    This is why I would be grateful for your help.

    Hi Somzil,

    To address this concern, we suggest you follow these steps on how to manage the properties of speaker of your device:

    1. Click Start, then click Control Panel.
    2. Click sounds and in the playbacktab, click speakers, and then click on Properties.
    3. New window opens as properties of speakers, then click on improvements.
    4. Check volume equalization.

    You can also see the steps on how to update your Audio driver and run the Audio troubleshooter under the title of the problems of sound on this link: the sound problems.

    We also recommend you to contact the manufacturer of the device to get help on this problem.

    Let us know how it goes.

    Thank you.

  • Sound suddenly does not work but the bars audio always in movement. Windows 7 audio driver: VIA High Definition Audio

    I turned on my pc and tried not to watch a YouTube video when I realized there is no sound playing. I tried to play a video file saved on my pc, still no sound. tried an mp3 player and still no sound. everything worked very well 24 hours earlier. the green bar on the sound in the status bar icon moves when I play something, but I can't just release anything.

    motherboard: ASROCK N68C-S UCC
    audio driver: VIA High Definition Audio

    Windows 7 latest updates installed.

    I have spent 10 hours reading all over the internet and have done the usual troubleshooting:

    • system restore
    • Driver update (from disk as well as site)
    • try different audio jacks
    • using different external speakers
    • playback enabled devices
    • System speaker levels are full
    • active volume equalizer
    • used Microsoft Fix it Audio Playback, which is no problem
    • Run the audio Troubleshooter in Control Panel, no problem found

    I even reformatted and reinstalled windows, hoping it would be like, but it was useless because I still have no sound.

    can someone please help me find a fix for this.
    If a system format has not fixed the problem, im only left thinking that its edge is completely dead and I need a new sound card?

    Hello

    I imagine the inconvenience that you are experiencing.

    I suggest you refer to the section 'I tried all solutions here and still can get my sound to work correctly ' from the link:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

     
    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
  • WMP12 - apply the Equalization of the volume to the existing library?

    Hello

    In XP/WMP11 I could apply volume equal an existing music library (Tools--> Options--> library-->--> add Equalization of the volume of the values for all files, monitor records). Selection would WMP11 analyze my music files as apply Equalization of the volume of data to each file.

    How can I do this in Windows 7/WMP12?

    Currently I have improvements--> fade-chained and auto Equalization of the volume--> turning on the auto volume EQ enabled. I have also--> Tools--> Options Add volume leveling of the informative values for new active files.

    Thank you

    Ken

    All my files are WMA Lossless. This format contains a legalization of the volume? Is the volume level just a setting in the markup of a file?

    Yes to both questions.

    I have about 175 gigabytes of music, almost 600 albums in my library. Is it possible to delete them en masse?

    To select all the songs in the library of WMP, first select a song (any), and then press Ctrl + A to expand the selection of songs. Then, with the right button of the selection, and then select delete - delete from library only , just like you would remove one song.

    Also, many of these songs/albums use data entered manually for the artist, title, etc. as the music of Microsoft database was incomplete or incorrect. These data will be preserved if I delete the files in the library?

    Yes. The only information that is lost are play counts and custom fields (and the rating stars, if keep my side to star as global in the files ratings is not archived Options - WMP library ).

    Another thought, if the volume is just a parameter in the tag of a file can I use a PC running Windows XP/WMP 11 to apply values of the Equalization of the volume, and then copy the files on the machine of Windows 7/WMP12?

    Yes, it should work also.

    Tim Baets
    http://www.BM-productions.TK

  • Equalization of the volume and Itunes game issues

    All my songs are upgraded using mp3gain and play at the same level on my computer.  But when streaming, the volume is in every sense.  Push me bananas!

    Tried the Sound Check and while I note that all the songs now sound more calm, the volume between tracks still differ as before.  I have not yet found a rhyme or reason to which his songs more or less than.  Does not appear to be linked to the question of whether a song has been balanced or not.  I also tried each song tags mp3gain stripping and stripping all BUT tags mp3gain and doesn't seem to work.

    So, is there a solution?  Someone at - he found a motive or reason for the difference?  I love everything which relates to the product but this.

    Thank you.

    He is not an Apple product. You should talk with the developer.

    http://projects.sappharad.com/MP3Gain/

  • problems after upgrade to 9.3.1 volume

    After update to version 9.3.1 there is problems with the volume.  The parameters are as high as possible, and yet, the sound is barely audible.  I can't hear it even holding in my hand and my hearing has not changed.  What to do?

    Reset all settings

    Then turn OFF Sound Check and Equalizer to yield a Maximum of Volume

  • My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

    I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

    Hello

    One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

    Kind regards

    DP - K

  • My volume on my laptop is extremely low!

    My Entertainment PC HP Pavilion dv6-6c10us volume is so low I hardly hear it! Listening to music and watching videos or movies are extremely frustrating because I can barely hear the sound. I did a test of its scope. All sounds are at maximumsettings. Is there some type of fault with the sounds on this laptop? When I bought it about 6 months ago, I expected to be unable to barely hear speakers. I need help, this very, very frustrating!

    Hello

    One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

    Kind regards

    DP - K

  • Volume is too low and completely devoid of bass

    I have a HP ENVY 17 Notebook PC (product number: E1P13AV) with Beats audio which has been updated to 10 Windows Windows 8.1, and my main problem is that the max volume on my laptop is severely lacking.  I can't say with certainty when this volume problem started, but I don't think it's that way when I bought it, nor when I first upgraded for Windows 10.

    I have a smaller, "non-Beats" Elitebook who puts her more to just 50 percent in volume and this machine at 100% and my Samsung GS5 seems to put just as much sound (and better base) that this laptop currently does.

    I saw a variety of message board posts associated with her messing around with the properties of speakers and activating / deactivating the Bass Boost, Virtual Sound and Loudness equalization, but none of these options seem to have no measurable effect.

    When you search the computer "Beats", there is no results, and I can't see any reference in the Panel. Is it possible that the Beats got off or the volume is being strangled somewhere else in the system? The situation is unsatisfactory, and I'm very interested in getting this fixed. Thanks in advance for any help you can offer.

    Hello

    Try to install the IDT HD Audio software on the following link - this should also reinstall the heartbeat gui.

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

    When the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • Very low volume on Portege R500

    The volume on my R500 (R500 - 11 c to be exact) is ridiculously low. Only with the volume at maximum (100) and using headphones I hear nothing, and even in this case, it is far too low to be useful. I can just do the test sounds to the left and then good listener when using his test detected in Control Panel-> Sound-> speakers (there no helmet to choose)-> Properties-> Advanced-> test. Unplug the headphones I hear nothing in the speakers, because of the (very low) sounds made by the fan and HARD drive. Play music (with headphones) I can just do the sounds are produced, but I can't even on what is happening.

    I tried the things mentioned in the "Satellite 5105-S901 sound is very low (even at max volume) to aid driver Toshiba ' thread without success (including the Loudness equalization).

    I am running Vista Business 32 bit and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe and Vista_Win7_R243_x86.exe the driver files and also used the util_mute_off_25847B.exe utility.

    Enabling silent makes the already weak sounds go completely silent, so I don't think it's a matter of mute.

    Jack detection works, I can see that in the Realtek HD Audio Manager program. Using sound test of this program (Configuration of the speakers) I have to go to a completely silent, and even in this case I can't hear something on the right headphone. (I think, it's darn so low, that I could imagine I hear.)

    Decreasing the volume slider sound 100 harder almost inaudible noise similarly points out, and around 45 it is more audible even in a quiet room with headphones.

    So it seems that I somehow need to reset the audio chip in a 'normal' level Or it is broken and does not display anything more audible.

    Does anyone have ideas, what I can try next? I can boot XP or Linux, if anyone has any ideas on how to get her here, just to start. (They are silent as well, I did not like extensive tests under those as Vista).

    Hello

    According to your message, you have tried to increase the volume by using all possible options
    Have you tried to increase the volume in Control Panel-> Realtek HD audio manager?
    Check this box

    You also tried to update the Realtek audio driver.
    Did you use the Realtek page directly?
    Check it!

    If this will not help, you might try the laptop with the new system recovered

    But if this does not improve the volume, then this could be a hardware problem

Maybe you are looking for

  • one of my missing e-mail folders

    Yes, when I go into my hotmail email account, one of my folders is missing, it contains a lot of important messages, suggestions of where he went, I know that I have has not removed them, thanks

  • Maximum length of a clip transfer?

    I plan to transfer more than 3 dozen mini DV tapes on a hard drive through import Final Cut media. Since I'm not still on the creation of projects, I wonder if there is a maximum length of time that can be transferred as a single item - bottom line:

  • Hang up C55 intiial satellite put in place

    I have a new Satellite to 8.1 Windows C55-A-1N1. Passing by the initial has been implemented and it seems to have hung up. I spent implementing microsoft account, connected to my WiFi, got to the point where he said it was installing/updating softwar

  • Is it safe to uninstall SP3 in Microsoft Windows XP, 64 version after several months of course of installation.

    I just discovered that SP3 is not for Windows XP with 64 processor. I forgot to update but I must have installed it because my information system confirms that it came with SP2. The question is, is - this course uninstall after this long period espec

  • I want to make Windows historic Silver specialist

    Hello I get to specialist silver level Windows When I click on the specialist money Windows entry course it gives me the message File not found     The requested page is not found. Please select or move to another page. File not found     The request