Vostro 1520 IDT high definition audio

Similar Questions

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.

• IDT High Definition Audio CODEC (NO SOUND PROBLEM)

  My PC Info is:

  Manufacturing: Hewlett-Packard

  Model: HP EliteBook 8460p

  Rating: 5.3 Windows Experience Index

  Processor: Intel (r) CPU of Core i5 - 2520M 2.50 GHz 2.50 GHz

  Installation of memory (RAM): 4.00 GB (2.98 GB usable)

  System type: 32-bit operating system

  Pen and touch: no pen or press enter is available for this view

  Windows 7 Professional

  Product ID: 00371-OEM-8992671-00008

  Problem: I was watching a movie one night before I cut and I forgot to turn on my laptop, today I discovered that the sound does not work, then I tried to restart and still without hope, I tried to disable and don't allow the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly , but oviously it's not I really need help, I don't know what it is advanced technology, so im helpless.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59291.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

• Pavilion p6-2375eo: IDT High Definition Audio Codec

  After a reinstalled windows 10 cleaning I have no device driver for IDT High Definition Audio Codec

  I can't get one from HP support not available for p6-2375eo

  I would like to know how and where I can get a device compatible windows 10 if possible

  everything works perfectly, but there is no sound

  ideas please

  BK

  Hello:

  Try the driver support page W8.1 and the driver of your PC...

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp63932.exe

  In the conversation below, you can see that it worked for another Member of the forum with the IDT on a laptop after upgrading to W10 and lose the sound.

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/no-sound-after-Windows-10-upgrade/m-p/5261703#M69344

• Good question HP Pavilion DV6 IDT High Definition Audio CODEC

  Hello

  I recently bought a new laptop for school and study. I bought second hand, because I could not afford a completely new.

  When looking for the laptop, make sure that everything was okay. I opened a YouTube video and the video began to play normally. No graphic problem must have problems of SUVs, or any audio. Plugged in my headphones and everything always went well. I literally checked everything and every aspect, and I finally bought it. It was running Windows 7 Home Edition 64-bit.

  Once home, I did a factory reset and I erased the whole HARD disk, simply because I wanted to be sure I could start with a clean Windows 7.

  Once he finished and booted up, I've updated Windows 7 until I couldn't either. Around now, time was about 02:00 at night.

  I wanted to watch my series on the Internet, but I got no sound. I disconnected my headphones and reconnected them and yet one time. No sound.

  I checked his Windows in the lower right, and while the video showed no activity of all sounds (no bars back) played. I then unplugged the earphones and tried on normal speakers. Nothing more.

  Strange thing is that when I plug in my headphones and I go to sound options windows and then I chose 'headphones (IDT High Definition Audio CODEC) Communication I stop the video, lower or higher, sound and playback of the video, the sound works perfectly well. But as expected, when you unplug the headphones no sound again. I had the same exact process without being plugged in headphones, but without success.

  During playback of the YouTube video this process works. But try a downloaded video, or the sounds of the sample of Windows itself, it gives me an error.

  If I play a game I have no sound.

  I don't know where I can see the correct modelnumber of your laptop, but it's a HP Pavilion DV6 with an i5 2410 M, 4 GB RAM 450 GB of storage (14, 5GB recovery) and a HD6770M AMD and Beats Audio.

  Any help is very appreciated!

  It seems a problem with the audio driver.

  Go to Device Manager > under sound and Audio > uninstall all the listed under it.

  Select Recovery Manager > drivers and applications > find the IDT audio driver and reinstall it to the computer.

  Restart the computer.

• HP Pavilion dv6 3127tx: Microphone does not work on Windows 10 IDT High Definition Audio Driver 64 bit?

  After 10 of Windows upgrade to Windows 7 facing big problem with my table Microphone internal (IDT High Definition Audio Codec): '(incapable d'utiliser Skype à Cortana et plus encore... s'il vous plaît essayer de résoudre dès que possible.)

  Thanks and greetings
  HP laptop Lover

  Hello @Shas_HP,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the Microphone and wanted to help you!

  First of all, try to use the HP Support Assistant to find updates for your Audio drivers.  I also recommend to use back to a previous generation option, in your system settings:

  HP Notebook PC - upgrade to Windows 10
  
  Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on the update of Windows 10 for a few weeks, until what drivers can be updated.

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• Windows 8.1 IDT High Definition Audio Codecfor P7-1421 driver missing

  I installed Windows 8.1 on my desktop PC Pavilion P7-1421 Thursday and now no sound.  A phone call from HP customer support did not solve my problem, as the representative said that HP has no driver Windows 8.1 IDT High Definition Audio Codec for my computer.  Does anyone know if there is a sound driver Windows 8.1 for my PC or if I have one solution other than coming in Windows 8?

  Thank you!

  You are welcome.

  Sorry that didn't work or the other.

  Have you tried auto update the driver for the device in Device Manager?

  See this thread where another Member of the forum said that he upgraded his PC to W8.1 with the IDT audio chip and there a Microsoft driver.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/can-HP-model-number-H8-1414-computer-be-upgraded-from/m-p/3036815#M74043

  If this does not work...

  Just for fun, see if this W7 a generic driver Intel works...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19282&keyword=IDT+audio&DownloadType=drivers&lang=eng

  If this isn't the case, then I guess you will have to wait as you say, until a driver is released for W8.1.

• My internal Microphone table (IDT High Definition Audio Codec) does not work

  Hello

  My internal Microphone table (IDT High Definition Audio Codec) does not work.

  I can't make calls from Skype.

  I've tried everything, but I'm still not able to solve the problem.

  Could you please advice me what to do?

  Could you please provide me with a link with the drivers, I might need to reinstall.

  My computer is Windos 8.1, HP, Intel i - 7 CPU, 64-bit operating system.

  I would really appreciate your quick response to solve this problem.

  Thank you very much

  Antonio

  Hey,.

  Try installing this driver: driver Audio IDT high definition (HD)

  If this fails, try to use the HP Recovery Manager to roll back the driver installed in the factory.

  After the two tests. I would like to know if the option worked.

• IDT High-Definition Audio CODEC Driver.

  Please computer its IDT High-Definition Audio CODEC Driver for windows xp driver laptop compaq presario cq61 115ee

  Use your C:\swsetup\driver\Audio Vista driver

• No sound. Assistant support said HP idt high definition audio codec ERROR 52

  Laptop HP Pavilion G7-1273NR

  Windows 7 64 bit

  Error of IDT High Definition Audio CODEC 52

  Windows says "No. Audio Output Device is Found.

  Everything worked fine last night.  This morning he has no sound.

  I guess I have an audio driver damaged (corrupted how? I don't know.)

  Just reply with a link to a replacement driver, & and/or advise.

  Thank you.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems of IDT High Definition Audio Codec

  Hi, use Toshiba Portege m405 portable, windows xp 2009, sp3 and I seem to be sound - IDT High Definition Audio Codec - this device cannot start (10). I tried everything but still no success. Can someone help me?

  Hi Daniel,.

  1. have you done any change in software on the computer lately?

  2. What is the brand and the model number of the sound card?

  3 have. what troubleshooting measures you tried to solve the problem?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  Post us the results once you try the steps above.

• "IDT high definition Audio Codex does not start"

  Windows Error Message "IDT high definition Audio Codex does not start" then said to check the audio device, WHAT to DO?

  Hello

  1. Once you get the error message?

  2 have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Run the patch from the following link and check the status of the issue.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Uninstall, reinstall the sound card driver and check the status of the issue.

  Uninstall the driver for the sound card.

  a. Click Start.

  b. click on 'Control panel' and select 'performance and Maintenance '.

  c. click 'System' to open the' system properties '.» Click the 'Device Manager '.

  d. click on '+' alongside 'Sound, video and game controllers"to expand this entry.

  e. right click on the audio device and click on uninstall.

  Download the latest driver from the website of the manufacturer of the computer audio card, install on your computer and check the status of the issue.

• my sound does not work - IDT High Definition Audio CODEC - shows Code 10

  The sound did not work for about 6 mos

  I uninstalled and reinstalled the IDT High Definition Audio - and every time - there is an error on the re - install.

  Hello

  1. do you have service pack 3 installed on the computer?
  Update the drivers for your audio device should solve the problem.

  Method 1
  Update through Windows Update hardware device driver. To access Windows Update, see the Microsoft Web site at the following address:
  http://update.Microsoft.com

  Method 2
  You can also update the drivers of the provider's Web site. Follow the installation or update.
  See also the links below:

  How to fix sound problems in Windows XP?
  http://support.Microsoft.com/kb/307918

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:
  http://support.Microsoft.com/kb/943104