VSS maintains itself switch back to "manual".

Similar Questions

• When I updated printer spooler 'automatic', after a reboot or two it automatically switches back to "manual". How to make 'automatic' permanently?

  Microsoft Vista

  I was the only one who got to manual in the first place, I did not know.
  I tried the fix from microsoft, this program (which set to automatic, but after a restart printer spooler is indented in the manual) I tried the system restore and reinstall the drivers. Don't know what I can do
  The printer is a HP officejet 5610
  Any help would be really appreciated, it does not even need to be a solution, just a way to get around it.

  Hello

  Try the methods provided below and check if persists it to the question.

  Method 1:

  I suggest you to run the Microsoft Fix tool which will set the service to automatic. To run the fix tool see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  If the method above does not help then you can try to run the system restore and check if that helps resolve the issue.

  To perform the system restore using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Method 3: Clean boot

  Perform a clean boot may help if there is a third-party program, change the setting of service.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Right-click menu changed: used to be the first "Open link in a new window", "Open link in a new tab" second; in 4.0, the opposite is true. Can I customize 4.0 to switch back?

  Right-click menu changed: used to be the first "Open link in a new window", "Open link in a new tab" second; in 4.0, the opposite is true. Can I customize 4.0 to switch back?

  To change the order of these items, use the following:

  • Menu editor: https://addons.mozilla.org/en-US/firefox/addon/menu-editor/

  You must update the following (your versions have known security problems):

  • Shockwave Flash 10.2 r152
  • Next-generation Java plug-in 1.6.0_22 for Mozilla browsers
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update the Flash plugin to the latest version.
     • Download and SAVE to your desktop, so you can find the Setup program later
     • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
     • Once the download is complete, exit Firefox
     • Click on the installer, you just download and install
       • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
     • Launch Firefox and recheck your version or up to the download link below to test the installation
     • Download and information: http://www.adobe.com/software/flash/about/
       • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
       • Use IE to go to the site above to update the ActiveX to IE
     • Download manual installers.
       • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
       • Note the separate links for:
         • Plugin for Firefox and most other browsers
         • ActiveX for IE
  3. Update the Java plugin to the latest version.
     • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
       • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
         
     • See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
     • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
     • Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
     • Java test: http://www.java.com/en/download/help/testvm.xml

• My sound system maintains itself to put permanent position mute.

  Original title: sound system reset?

  Hello..  From the windows of the last update, my sound system maintains itself reset for the Permanent position SECRET and I cannot figure out how to stop it.

  I went through the Troubleshoot utility (any help, tells me to turn it...  If I could do it, I wouldn't look for help!)

  I went to my device manager for hours trying to figure which is the issue... my speakers are set to the default device just as they have always been ect ect ect...   I did a virus scan... nothing found...  I checked all my drivers for the computer and all are up-to-date.  I can't figure out how to stop this.

  When I restart the computer, all is going well for a few minutes... then the volume goes silent for some unknown reason.

  When I click on the sound Manager, the cursor is completely zero.  When I try to move back up to 75%, I hear the ping of buffer, the cursor moves upwards a little and then goes back right down to zero.

  When I opened the "mix", a new system called "item" sounds is shown... that was never there before.  Unknown if this has something to do with it, but it's the only thing I can see that is different...  Apart from the fact that windows installed new updates a few days ago and this has happened since then.

  Hi Kaahlin,

  This might have caused corruption of driver's record. I would like to know some information about this problem so that we can help you further.

  1. What is the number of brand and model of the computer?

  2. do you get any error code or error message?

  3. put to update that you installed recently? (Mention the number of the update)

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps. This article consists of the steps to solve problems when there is no sound on your computer.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Remove the update that you installed recently and check. This is to check if the problem is caused due to an update or not.

  See the following article from Microsoft Help to remove an update.

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  Method 3:

  Perform the system restore and restore to a date before the problem started and check if the problem persists.

  See the following article from Microsoft Help to perform the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Please reply with the status of the issue so that we can better help you.

• the Windows media player 12 switches back on small screen while watching DVDs

  WMP 12 fine plays the DVD, but after 6 minutes it switches back on a small screen and I have to click the button again to view full screen.  This happens throughout the entire video and on any dvd movie that I play.  does anyone have a suggestion?  Thank you.

  I used to get this [as did many others on the forum], but this isn't a symptom of failure.  You just need to adjust some settings.

  1. open WMP

  2 press alt - t for the Menu bar, menu Tools then uncheck allow screensaver during playback & click OK.  [Note that, if sometimes you want it to work, then you have to modify manually every time, I fear].

  3 press alt + v to get the Menu bar, menu display.  Place your cursor above the video size, the last item in the list.  Click on the made video to player on resize to oppose a tick of this element.

  4 press alt + v to get the Menu bar, menu display.  Place your cursor above the video size, the last item in the list.  Click Mount video drive to oppose a tick of this element.

  Yes, I know that sounds illogical.

  That's all you need to do.

• When I upgraded my Adobe Flash Player, my past Google Yahoo search engine.  I can't switch back.

  When I upgraded my Adobe Flash Player, my past Google Yahoo search engine.  I can't switch back.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2 safari > Preferences > Search > search engine:

  Select your preferred search engine

  3. visit the site of your choice that it be the homepage

  Safari > Preferences > general > home page

  Click on the button "set to the current Page.

  4. use Malwarebytes Anti-Malware for Mac to remove adware.

  https://www.Malwarebytes.org/antimalware/Mac/

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

• My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files

  My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files.

  Hello

  1 are. what type of files?
  2. when they are stored?

  3. What is the size of these compressed files?

  Try to perform the clean boot on the computer and check if that helps.

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  See the bottom of the articles that might help you resolve this problem.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• If I don't like windows 10 can I switch back?

  If I don't like windows 10 can I switch back?

  You can read about rolling back here

  https://techingiteasy.WordPress.com/2015/03/24/how-to-rollback-to-a-previous-version-of-Windows-from-Windows-10/

• Flash Player bons maintains itself removal

  Hello, I need help ASAP! I have download the installation of flash player, but it maintains itself removing my computer until I can't install it. And my virus protection does not block it either since it does not currently work. I'm on Windows 8, how to fix this?

  Try Setup offline http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe

• Airplay iMac switches back on computer after you select the apple tv. Why?

  From Imac display by selecting Appletv heard music lasts for a few minutes then switches to my computer. Why?

  Hello brianfromsooke,

  If you try to use your iMac, Apple TV AirPlay, but the audio output automatically switches to your iMac, it may not be the flow enough on your Wi - Fi network.
  

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  Sincerely.

• Windows 2008 Server - date maintains itself to current date

  I'm trying to test/validate a bug in a product, I am responsible, where there may be a problem in the program caused by the switch to summer time.

  I have two Windows 2008 servers (it is a client/server product, so I need two machines) and on both machines, I went in the Date/time settings and turned off the synchronization time Internet.

  I then in Date/time settings and set manually the current date of computer for 1 November 2014 - my intention is to let the daylight savings so automatic switch so I can observe the behavior of this program when the clock reached on 2 November and DST comes into play.

  On one of the servers (but only one), a few minutes after setting the date back to November 1, the date automatically resets as of today, even with the internet time sync disabled.

  On the other server it does not, and the date remains as stated.

  Can someone help explain why this could be?  I would like to get the date to stop change himself if it's possible.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• HP PhotoSmart 6525 Switching Back-and-Forth between USB and wireless

  Hello

  I set up my HP PhotoSmart 6525 following installation 'wireless with a router' instructions (i.e. No Direct wireless).  I am able to print from my laptop through the wireless network.  I would also like to be able to print from my laptop using the USB connection at the time where my laptop is physically sitting next to the printer.  At times where it is not the case, I want to continue to be able to print wireless.

  Is it possible to install the printer drivers on the laptop so that I can switch easily back and forth between printing USB and wireless printing?  I suspect that it is not possible because of the user's guide has a section describing how do to "Change a USB connection to a wireless network" you click on an item of menu called "convert a connected USB printer wireless.  There are no instructions to know how to convert USB.  In addition, the use of the word "convert" makes no sound as you can maintain the two methods to print simultaneously on a single computer.

  Does anyone know if this is possible and if so, how?

  Thanks in advance,

  Paul2

  Hey Paul2,.

  I see that you have the HP Photosmart 6525 installed for a wireless printing capability and would also like to add a USB driver so that it is available for use by the printer.  Please follow the steps below to add a copy of the printer for USB printing.  The steps below are for Windows 7 and below computers.  If you have Windows 8, then the steps will be slightly different then let me know.  Please let me know if you have a Mac, because I can provide these steps at this point here.

  • Press the start menu of the computer
  • Select all programs
  • Open the HP folder
  • Open the folder for the Photosmart HP 6520 series
  • Select "printer setup and software."
  • Select the option to add a new printer
  • Select the USB option
  • Connect the USB cable when the software asks and proceed through the installation process

  You let driver Jack without wire in place and add a second printer in the devices window and print USB printers.  The USB printer may contain 1 copy in the name as a differentiation, but it must also indicate network in the name of the printer to indicate that it is the wireless option.

  I hope this helps.
  Jason

• I just came to the new current version that does not support toolbar Google... lost all my favorites Googl and really piss me off the power! How can I switch back?

  To summarize, when I switched to this new version, I lost my Google toolbar that also included the different bookmarks for bookmarks in the toolbar at the top, or Firefox bookmarks. The two reflect each other and so I lost vital bookmarks that I had stored in the Google Bookmark program. I want to go back to the previous version.

  You are welcome.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• E260 itself switched to MTP mode?

  I have a sansa e260 EU w/o runing FM. New firmware, 01.02.24E

  It was running under MSC. Recently, Vista, I installed the new update of sansa and plugged my player. There is no directory of MUSIC in there, but it was there before.

  I unplugged, switched to MTP mode and found the music. I prefer the MSC, covers album folder.jpg and all mode. I have to remove all music from PSG and the copy in the back of my PC to a freshly created in MSC mode MUSIC folder? Is there another way to solve this problem?

  If you want to switch to MSC mode exclusively, one possibility would be to do what you are thinking: copy all files on computer through MTP mode and then put them on the player in MSC mode.  I would like to format the drive before reloading in order to free the memory.

  Another recommendation would be to create a folder named something else outside of MUSIC.  Sometimes, the player he gets into his head to hide this folder.  It can be unhid, but why bother when you can just use a different folder?  Use something like my MUSIC or similar.

  Edit: By the way, the player always returns to the default (auto or MTP) USB mode after the firmware update.

• I can not print online. It keeps switching back on print offline. Waiting for a response from HP. All the answers? Thanks in advance,

  I tried all means to solve this problem, but it goes back to printing the line off the coast.  The work of the printer, paper comes out but empty!

  Reloaded without change Blank ink cartridge empty pages.

  Hi PCMom_FL,

  ·         Did you do changes on the computer before the show?

  ·         What is the model number of the computer?

  ·         Are you able to print from other applications?

  ·         What is the full error message?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         Have what troubleshooting measures you tried?

  Follow these methods.

  Method 1: If you are using Internet Explorer, follow the steps in the article.

  I can't print or preview before printing a Web page in Internet Explorer

  Method 2: Follow the steps in the article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Also, see the printer manual for more information and help.