W700 2758-4sus: unable to update the Bios

Similar Questions

• HP Pavilion DV6 3122TX: updated the BIOS F.29 don't switch HP Pavilion DV6 3122TX Ati graphics card

  Hello

  I have HP Pavilion DV6 3122TX and recently I was updating my drivers and software from the HP Web site for my laptop. Everything was done smoothly. As I updated my BIOS, I noticed that I was not able to switch between ATI Radeon 5650 and Intel HD Graphics, then I was also shocked that he wasn't showing a charger plugged into icon too. Although the battery was charging but didn't show any icon for it. I am running Windows 7. After a few days, my battery was went wrong and was not in charge. I bought the new battery from HP Store for my laptop, and then after a few days now he is dying too. My computer laptop suddenly stops on about 30% of battery remaining and battery does not charge. I arranged another charger and plugged, but once more. I gave the laptop to the service center local and got NO from them as well. They couldn't find the problem. After a lot of research and reading messages HP, I finally understood that it was the problem with the BIOS Update and Windows 7. So, out of curiosity, I installed Linux RedHat 6 on windows 7 and everything was OK. But I am a graphic designer for Linux is not a good choice for me. I want to just restore my BIOS in its original version of the default BIOS. Please kindly help me to get my original BIOS. I tried everything on my hand. I also ask HP to the original versions of the drivers like BIOS on its Internet site. My laptop is dying. Please, Experts, I need your kind assisstence. Thanks in advance

  @AbdulRaheem25

  Create the key USB HP Diagnostics of material 3-in-1 PC and boot to it.

  If you updated the BIOS from the old version will still be in a folder of your operating system. Use the method I proposed to get it back.

  If you are unable to read the instructions on the web page of Diagnostics of material for the HP PC, then I suggest that you pay someone to do it and create the flash drive for you.

  We are here for our volunteer help and trying to direct members of the resolution of their problems, but if you want us to help you work with us. We (HP Experts) are not employees of HP, we are volunteers.

• Update the BIOS and system health report question

  I have two questions to ask you.

  1. I just bought a Quad DV6T-7000 a month ago. I'm unable to create a report of health system through the control panel > performance & information > advanced tools > generate system health report.  I get an error saying "cannot run" with no other information. It apparently came from HP in this way. Something has been corrupted? I have configured my laptop the way I like it and have installed all programs and applications of my previous laptop, so I hope that I don't need to do an installation of windows 7 to fix this. It is not really important. But it should work.

  2 HP Support Assistant automatically installs updates to bios, or is it something that has to be done manually? I am currently set to auto critical or important updates. There is an update of the bios (f.22 I think) available for my Pavilion DV6T - 7000 Quad Edition, however, I am wary to update my bios given the many problems that people have after doing an update their bios.  So far, HP support Assistant has not notified me of the update and I have problems with the problems it addresses. Should I be worried?

  Thank you, appreciate your making this feature expert day!

  CRS says:
  

  I have two questions to ask you.

  1. I just bought a Quad DV6T-7000 a month ago. I'm unable to create a report of health system through the control panel > performance & information > advanced tools > generate system health report.  I get an error saying "cannot run" with no other information. It apparently came from HP in this way. Something has been corrupted? I have configured my laptop the way I like it and have installed all programs and applications of my previous laptop, so I hope that I don't need to do an installation of windows 7 to fix this. It is not really important. But it should work. , You can run the System File Checker to see if there are problems of file system.  Open a command prompt with admin permissions and type sfc/scannow, and then on enter. The files of your operating system will be inspected and the files that are supposed to be corrupted or damaged will be replaced with fresh copies of the repository own Windows file.  If this does not resolve the problem, then I suggest that you run Windows update. There may be an update that resolves this problem

  2 HP Support Assistant automatically installs updates to bios, or is it something that has to be done manually? I am currently set to auto critical or important updates. There is an update of the bios (f.22 I think) available for my Pavilion DV6T - 7000 Quad Edition, however, I am wary to update my bios given the many problems that people have after doing an update their bios.  So far, HP support Assistant has not notified me of the update and I have problems with the problems it addresses. Should I be worried? I recommend not updating the BIOS if everything works. Updated the BIOS, just because you can, this is certainly an adventure risky for most people.

  Does your laptop have a UEFI environment.  This in fact safe update the BIOS if you decide to do.

   

  You can set the HP Support Assistant to install updates or to notify you when updates are available.

  I recommend that you do not set automatically update anything. My preference is that the Windows operating system and the laptop / desktop only doing what I want to do and when I want them to... That way I don't get surprises not unexpected and mysterious death blue screens or black screens.

     

  Thank you, appreciate your making this feature expert day!

  Greetings from nest,

  ERICO

• Unable to update the firmware in Mezz KX4 - KR DP 10 GbE Ethernet X 520 14.5.9 version

  Hello

  Try to update Intel x 520 10GbE mezzanine NIC firmware on a blade of M620 fails with the following error:

  SUP0517: Unable to update the firmware in Mezz KX4 - KR DP 10 GbE Ethernet X 520 version 14.5.9.
  Detailed description:
  The image of the firmware specified in the operation did not properly apply. An internal error occurred.
  Recommended action:
  Try the operation again. If the problem persists, download the latest update of your service provider package and try the operation again.

  BIOS, iDRAC, Lifecycle Controller firmwares are newer. I tried to upgrade from iDRAC and directly from controller (using SUU) life cycle, the same thing. haven't tried yet the OS. I want to update firmware, because she refuses to get DHCP address when you try to boot from PXE to deploy the operating system. At the same time in the controller of lifecycle, in the configuration of the network, I was able to successfully get the addresses of the DHCP server and scan the Dell FTP site for firmware updates.

  Any ideas? Thank you.

  Egils

  I would like to start the update of the direct OMSA. Once updated, this should not happen again.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• Impossible to update the BIOS on my Satellite A660

  Hello, guys!
  When I try to update the BIOS on my laptop in version 2.3 (latest version 1.6) I get the message "install UEFI winflash 0.02:

  + The program will be closed! +
  + There is an error occurred, please check below Articles. +
  + The BIOS above 230 version. +
  + More than 20% of battery capacity. +
  + Is attached AC. +

  The conditions of the first and the last are rooms but the second is not because the battery is dead (always 0% charged). Is there another way to update the BIOS?
  Thank you!

  Post edited by: al_3

  No, there is no other update BIOS because victory BIOS update version is available on the Toshiba driver website.

  I guess you need good work and battery charge in order to update the BIOS.

  But why you want to update the BIOS? Is something wrong with the laptop?
  The update of the BIOS is a very serious update and must be done very carefully
  Incorrect procedure may damage the motherboard!

• Yet WT8 - after that updating the BIOS 1.6 screen is too bright

  After the update the BIOS to version 1.6, as even the lowest setting of the screen is bright when using the device in a dark environment (e.g. reading in bed). Before the update, I simply set the brightness slider Windows at the lowest level and everything was fine but now it is so brilliant that he hurt the eyes.

  Anyone else with this problem? Is there a solution?

  * Brightness * level is a function of * EC version * (on-board controller).

  There are variants _Two in units shipped: __

  THIS 1.10 + and +-bios 1.20
  THIS 1.20 + and +-bios 1.20

  _After bios upgrade: _

  THIS 1.20 + and +-bios 1.60

  EC 1.10 was 1.20 lower brightness level, 1.10 is so much better in the dark situation, * ask * Toshiba * Europe * to solve this problem.

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Update the BIOS - protected A600 problem

  I'm trying to update my BIOS settings on my laptop (that I was invited to do by the service of Toshiba hardware update).

  I followed all the instructions provided by the program because it extracted and ran the update. However, the computer began the reboot process, but has been 'disconnected' windows (Vista Business) for about an hour now. I don't know how to stop the process without causing serious damage to my BIOS, but this does not seem normal.

  Help, please!

  Hi wilreb...

  I think that the user henharas a bad experience with the BIOS updates.
  I updated the BIOS many times and never had any problems...

  I assume you mean on Tempro software... this software informs you about updates on the Toshiba page. It is not a recommendation for an update, but simply an alert that new updates has been published...

  If your laptop is running properly, then update the BIOS is not really necessary...
  You must follow these tips; never change a running system ;)

  In any case, after the update of the BIOS shouldn't take too long and if she has completed, you should see the new version in the BIOS settings...

  Check it out...

• How do I update the BIOS on the Tecra R940?

  Are there instructions for BIOS update for my Tecra R940/Win7Pro/64 bit?
  Thank you
  AB - Oz

  On the BIOS Toshiba download page you can download the version of WIN. This means once downloaded BIOS, you must run it under Windows running as all other applications.
  By the way: is there a reason to update the BIOS? Have you noticed any problems with your machine?

• HP Omen: update the BIOS

  HP support assistant shows that there is the following update:

  HP notebook System BIOS update
  Number SoftPaq SP74378
  version F.34Ap1

  tried to download and install without success

  should I worry?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  No, no need to worry.

  Updated the BIOS/UEFI is not a critical task and I would say that you leave like this for now.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but can introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  Update/update IF you have any specific questions that you know have been fixed in the new version or for some serious security issues. Otherwise, keep the existing version as long as possible.

  See you soon!

• Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

  Hi all

  I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
  The version of the system BIOS is v1.30
  I want to Flash the BIOS for you last version v2.0.
  This version is released in January 2009, before the introduction of Windows 7.

  There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
  I think I have to go to the operating system independent.
  Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

  Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

  So here's my question: this BIOS version is compatible with Windows 7?

  Thank you very much!!

  AJ.

  Hello

  I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

  But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

  Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

  Back to BIOS update:
  In your case I would try not to update the BIOS if the laptop works properly.
  Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?