wait and trigger the first incoming digital dashboard

Similar Questions

• How to pass data to the tables according to the value of the first 4 digits of 7 strings of numbers

  I want to sort incoming data, in several bays based only on the first 4 digits of each string.

  For example, a hexadecimal string may be 41322033333533 which is A1 3353.

  A1 is a sensor. particularly, and I want to send all data from the A1 to a table. I have 8 sensors data and want to send the data to separate the bays of sensor. My sensor names are A1, A2, A3, T1, T2, T3, W1

  I will use a structure of the matter, for loop and a comparison of '=' for the data. However, I want to only compare the first 4 digits of the string and I can't find an operator for this. Any advice on how to proceed would be appreciated.

  With a thread like this

  

• iPhone5 only showing the first 8 digits of the wi - fi address

  Address wi - fi is only showing the first 8 digits, then... How do I access the other 4?  Even when I turn the phone on its side for more space it does not when you view the settings screen.  I try to connect to a secure wireless network and may not without the entire address.  Any help appreciated.

  I go in settings/general/to say and it displays all my WiFi address. Yours does not work?

• Insert hyphen after the first two digits

  I don't see just how I can insert the hyphen in one of my filed talbe. for example I have 123456789, 321654987 I want just to add the hyphen after the first two digits. 12-3456789, 32-1654987. Do I need an update statement to change that in my talbe. Thank you

  Of course, the column is VARCHAR2, then

  UPDATE t
     SET a = SUBSTR( a, 1, 2 ) || '-' || SUBSTR( a, 3 );
  

  Or you can leave it as it is and create a new view on the table in the format of the string you want.
  Or you can just format the selection of the table.
  Or you can add a virtual column with data formatted as you wish.

  All depends on your needs.

• Comparing the first four digits

  Hello
  
  
  I need to compare two different tables say account numbers a and b
  
  
  
  I need to select the first four digits of the account number of 'b' and which correspond with the first four digits 'a'
  
  
  
  for example in b if I have the account number from - 1234
  
  I need to select all the account numbers from a starting with 1234 - like 1234567, 1234789etc.,.
  
  
  Please help me

  Hello

  Account numbers are really numbers and not the chains?
  If the two numbers have different lengths (e.g. 1234567 and 1234) do you always want to compare the first four digits?

  Assuming that the answers to both is "Yes":

  ...
  WHERE   SUBSTR (TO_CHAR (a.account_number), 1, 4) =
          SUBSTR (TO_CHAR (b.account_number), 1, 4)
  

  If the account_numbers are really chains, omit TO_CHAR.

• Cannot play command and conquer the first decade

  Original title: does not load in entriely

  Hi all

  I command and conquer the first decade on my computer, so about 4 days ago. If the disk loads up in the game selection menu, I click on red alert 2 with the file of the revenge of yuri. My computer screen everything turns black and acts as his charge, when all the brough sudden im back to the selection menu... help?

  Hello

  ·        What operating system do you use?

  ·        Were you able to play forward on the system?

  Try the game CD in another computer and check if you are able to play the game or not.

  If you use Windows 7, then the game is not compatible. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=command%20%26%20Conquer%3A%20The%20First%20Decade&v=EA&UID=&PF=9&PI=5&c=PC%20Gaming&SC=strategy&OS=32-bit

  The game is not compatible with Windows Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=command%20%26%20Conquer%3A%20The%20First%20Decade&v=EA&UID=&PF=1&PI=0&c=PC%20Gaming&SC=strategy&OS=64-bit

  Step 1:

  I suggest you to uninstall the game and reinstall in compatibility mode and check if you're able to play the game or not. Follow the steps mentioned in the articles given below to uninstall the game from the system and install compatibility mode.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello, I subscribe and pay the first month and I always have tryouts, how do I do thanks

  Hello
  I subscribe and pay the first month and I always have tryouts, how do I do thanks

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  failure help, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• How I can add to a table of defined length and have the first value is the first value out.

  I want to build/adding a table. Let's say that the length is set to 10 items. When is element 11 I want the first element to be expelled for that table a always the latest 10 items in there in order. the berries should look like this:

  {0,1,2,3,4,5,6,7,8,9}

  1,2,3,4,5,6,7,8,9,10 {}

  {2,3,4,5,6,7,8,9,10,11}

  etc.

  Any help is greatly appreciated. Thank you

  Here's a VI revised, except that I use LV8.5 and the lowest, I can record down to is 8, so maybe someone will be kind enough to convert it?

  Attached an image too

• sent letter drafts in hotmail, went back to send and only the first line of the text was visible, have been if the rest went, and how do I get that back

  typed a letter and drafts in hotmail, whent sent to retrieve to send and only got the first line of text back.

  Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon

  Mick Murphy - Microsoft partner

• Vibrato flutter and trigger the sounds grew of different short low purr in Windows 7 64 bit

  These sounds have emerged in June after a Dell Inspiron 1545 laptop had an update of windows explore 10 and a grandson slammed the close laptop case. The intermittent short buzz has progressed to a flutter of constant vibrato in shades of superior height (display two bars very high to the right of the screen when audio from the control panel). Remove these two bars triggered the vibrato everywhere effect at the level of sound frequencies.  Ran PC Doctor - Dell PC diagnosis report online and got good health for the sound card, as it already had Windows.  Go to the control panel after a couple audio driver download updates of Dell - (previously uninstalled all Windows and '' recommended '' Explorer updates back to April 13 with no immediate effect) and after muted, not silent a couple of times from the taskbar of the office, with its open the Volume mixer - speakers / headphones (IDT High Definition Audio Codec) of the control panel , his mistake was reinstated regular 1-1.5 second low-frequency buzz new sounds, close enough one time every 24 seconds.   Currently have the system sounds (already programmed to noises of no) and browser (Firefox) sounds the two as buzz continues mute.

  So far, no clue that there is an Allen key, cursing, bad juju or the first sign of an alien invasion.  I have not recently installed anything other than Windows or Java updates / updates to Flash Player. McAfee has been finding anything about virus scans, for what it is worth.

  Is it possible to a semiconductor fail somewhere?

  Contact HP for assistance...

• Remove the automatic sequence and trigger the DDL for surrogate keys?

  Is there a way to remove the shutter and the sequence of creation for surrogate keys when export file DDL?

  I know that most of the time the auto sequence and trigger creation is welcome and very convenient.

  However I'm migrating from an old model of Designer and here only the necessary sequences are created.

  They have a different name and logical trigger is personalized (and generated outside of the Designer).

  There is a lot of code package accordingly. So, I prefer to create and use different sequences.

  Is there a way to do this? Tips are welcome. Create

  Hello

  you change preferences - "Data Modeler > model > physics > Oracle"-set "Default auto-increment DDL" and "Identity default DDL" voices against ZERO and generate the DDL for Oracle12c

  
  

  Philippe

• How to run the code (invisible) after connecting and before the first page of the user.

  Our site has a standard login page that I can't change. But I want to run code 1) after logging in the application (not APEX!) and 2) before the first page of the user of the application. How could I (can I?) put it on a page that runs invisible and then transfers it to the first page of the user application? Also, it would be great for testing I could reiniitalize easily between test scenarios without having to log in again.
  
  Thanks - Howard

  You could put it on page 0 and condition the process so that it works only on the login page.

• all characters replaced by square with two zeros on the top and a number below, works ok when uninstall it, reload and start the first time, after that the problem reappears. sometimes works first time to reboot. IE and Chrome ok, light running. v 7, wind

  Set up of fonts etc seems to be ok, still had problems with plug-ins disabled

  Try to set the pref gfx.font_rendering.directwrite.use_gdi_table_loading false on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• How to get the first 6 digits and the last 4 digits of a string?

  Greetings people.
  
  A small question and probably quite simple for a lot of guys out there.
  
  I have a string which can be anywhere between 15 and 20 characters (not a fixed length)
  
  I can't be divided into 3 segments.
  

  Segment 1 : 123456 ( 6 digits )
  
  Segment 2 : Everything else in the string from where Segment 1 ends (+1) and Segment 3 begins (-1).
  
  Segment 3 : 1234 ( 4 digits )

  Any help is appreciated!
  
  Thank you

  select substr (str, 1, 6)
       , substr (str, 7, length (str) -10)
       , substr (str, -4)
    from test