Want DVT7 Notebook: Circle of busy cursor after upgrade to windows 10 worm 1511-10586

Similar Questions

• HP 15-r078tu Notebook PC: problem of brightness after upgrade to Windows 10 - r078tu

  I use HP 15-r078tu Notebook PC.  After the upgrade to windows 10 laptop brightness was awkward.  I always work with a minimum brightness.  But after the upgrade of the brightness of the screen is high, even when I set minimum height in power options.  When I keep up it is brighter than before.  And after the upgrade, the brightness control buttons work abnormally.  Reduce the brightness button is increases the slide of the brightness and the brightness button increase it decreases.  After a reboot, it works fine, but only after a reboot whenever you turn on the laptop.  I checked all updates in assistant hp support and updated all the drivers.  I also checked the online solutions for

  1. change the display adapters in Device Manager

  2. check updates

  3 go back to the previous driver and even after change to basic brightness microsoft display adapter is the same (he doesn't) even fit in (buttons) hardware / software (power options).

  

  Nothing has worked.  Any solution please?

  This driver is listed under the W10 drivers section, even if it's for W8.1 and more.

  You might want to try this one.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp69589.exe

  If this one doesn't work either, unfortunately, I don't have any other suggestions for you to try.

• Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

  Hi all

  After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

  What should do?

  standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

  Kind regards

  Robert

  Thank you hipolitorodrigues,

  your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

  CU, Robert

  8  re: does not start Lightroom CC

    

     Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

  Go to the Panel, then programs and features.

  Please select Microsoft Visual C++ 2012, 2013, and fix it.

  Restart the computer and then let me know if the application works.

• Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...

  Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...

  You can uninstall creative cloud, CC of Photoshop and other Adobe programs you want to remove "Programs and features" in the Panel

  Execution of other http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe

  Then reinstall Creative cloud link below

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Register and download the programs you need

• Unable to open file vista business user, after updating to windows 7 pro, any suggestions?

  After upgrading to Windows 7 Pro, I'm not able to open the user folder in old.windows. I can open the folder of the file and windows program (they are also in black text whereas the text for users is blue).

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Satellite A300: TRDC reminder & Toshiba Recovery Disc Creator works after upgrade to Windows 7?

  Hello

  I'm sorry for the bad English.
  Satellite A300.
  Has performed the update to Win7 upgrade Toshiba program.

  This program works;
  TRDC reminder and Toshiba Recovery Disc Creator after update to Wins7?

  The TRDCReminder program found no "revival of the computer.
  Toshiba Recovery Disc Creator program was created and incomprehensible?

  If what these program how to recover your computer in case of failure?
  TEMPRO works in Win7?

  Thank you very much.
  With greetings.

  Igor.

  Hello Igor

  In my opinion, you must create recovery disk before upgrade you to Win7. I did the same thing.
  Later, if something goes wrong, you can use your disks and install Vista using the created recovery disks.

  I don't understand why you want to wait and create these disks after upgrade. This recovery creator disc doesn t create recovery image in the current state, but always the same recovery image, you got with your laptop.

  TEMPRO should work in Win7 too.

• HP Pavilion g6: applications like QuickWeb HP and HP Power Manager remain after upgrade to Windows 10

  I want to upgrade my pc to Windows 7 Home Premium 64-bit for windows 10 per repair installation that is running the Windows 10 installation on my pc files after copying the originally from the installation of Windows 10 disc. This will improve my pc Windows Enterprise 10, but with the option of maintaining of the personally only files. Can I download this apps again after the upgrade or they are somehow; or beter still, can they be recovered from HP recovery.

  Hi @akinzaxy,

  Thanks for the information. When I checked the page software and drivers for your laptop, I noticed there are no drivers available for Windows 10. This means that HP has not tested Windows 10 on your laptop model. HP does not guarantee that the Windows updates will have all the drivers. This does not mean that it will not only work the result is unknown. If your system meets all the requirements of system here is a link to purchase the upgrade. Free Windows 10 update (from microsoft.com). You have an option for the first 30 days to restore your previous operating system.  You can put 10 Windows on a USB key, so you should have a copy to reinstall Windows 10 If you wish. Windows USB/DVD Download Tool (from microsoft.com). Should you like to recover back to factory settings, I suggest you create your recovery media before you do the upgrade if you have not yet done this. HP PC - creation of recovery disks or save an Image of recovery of a USB (Windows 7)

  Here is a link for you to take a look if you still want to do a cover, once you have upgraded to Windows 10. Computers HP - perform a recovery of the system (Windows 10) HP. Regarding the power of HP and the HP Quick Web software management tool, they would not. As Windows 10 has not been tested on your model, I can not say if they would execute corectly or not. You can download the software from the software page and HP driver for your laptop and try to install. If they do not work as expected, you can try installing them by using compatibility mode. If you are interested to try this, here is a link to the Compatibility Mode (from windows10forums.com) as a guide.

  Please let me know the results.

  To say thank you to help us, please click "" Thumbs Up Icon "" below.

  If I went to your query, please consider the post with response marking as "acceptable Solution" to help others who may have the same or similar questions about the upgrade.

• After upgrading my Windows Vista computer to SP2 double my user account icons.

  Original title: After upgrading my Windows Vista computer to SP2 double my user account icons. I'm not trying to delete one of them, because all of the account will be deleted.  How can I fix it?

  I use a laptop Lenovo Dual 32-bit CPU. My OS is Windows Vista Business.

  Hello
   
  Where it seems double?
   
   
  Method 1:
  Step 1:
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 
   
  If step 1 work, try step 2
   
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
   
  If the problem persists, you can uninstall service pack 2, put the computer in start state in minimum mode, and then reinstall Service Pack 2 and see if that helps.
   
  Step 1:
  
  Perform the system restore and go back to a date when Service pack was not installed on the computer.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Step 2: Put the computer in a clean boot state.
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Step 3: Download Windows Vista Service Pack 2 here:
  http://www.Microsoft.com/download/en/details.aspx?ID=16468

• I have windows 7 key to business, how can upgrade to windows 10. I see that it is not included in the upgrade process

  I have windows 7 key to business, how can upgrade to windows 10. I see that it is not included in the upgrade process.

  In some forum I read, I can upgrade with a small charge for windows 7 ultimate, and after that I can move on to W10. Someone can tell me where and how do I upgrade to W7Ultimate?

  Thank you

  Windows 7 Enterprise is a volume license customer, it is not eligible for the free upgrade offer. If you have Windows 7 Enterprise through your employer, contact the network administrator or your Help Desk Support staff for more information on the upgrade to Windows 10 company.

  If you need Windows 10, you can purchase one license other wise, then perform a custom installation. You will need to reinstall the drivers and applications and also to save your personal files.

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• Computer laptop Sony Vaio after upgrade to Windows 8 screen appears Dim

  * Original title: laptop Sony Vaio upgrade to Windows 8

  Since I've upgraded to Windows 8, my screen on my Sony notebook is very low. I went on the Sony website, and he recommended that I have not upgraded to Windows 8. Too late! What should I do to fix this?  I have a Sony Vaio VPCS111FM. Thank you!

  Good morning Sonu,

   
  Thanks for posting your query in Microsoft Community.
   
  I'm sorry to know that you are facing problems with the Sun computer screens after upgrade to Windows 8
   
  I imagine how it could be frustrating when things do not work as expected.
   
  We will try the following methods and check if it helps.
   
  Method 1: Enable adaptive brightness and see if brightness improves:
   
  1. press Windows + X key together on the keyboard button.
  2. Select Control Panel.
  3. click on power under Control Panel Options.
  4. Select the settings of under balanced plan.
  5. click on change advanced power settings.
  6 expand the view.
  7. turn on the Enable Adaptive brightness.
   
  If this method does not improve the brightness of the screen, turn off Adaptive brightness allow once again.
   
  Method 2: If you still face the question, I suggest to download graphics drivers on the manufacturer's Web site and follow the link below and install the drivers of graphics card in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Additional reference:

  If the problem persists check the link below and follow the suggestions of Miguel

  Sony VAIO - hardware & networking community
  http://community.Sony.com/T5/VAIO-hardware-networking/VAIO-VPCS111FM-display/TD-p/62019
   
  Hope this information helps, just reply to the State of the question to get help.

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.