Ways to improve the quality of TB

Similar Questions

• Is there a way to improve the quality of the image on the phone available

  I'm working on the layout of the phone for a customer of the restaurant and they want their menus included. Unfortunately when zoomed in they're pixelated and difficult to read. The original images are 612 x 1008 and Muse is resampling to 342 x 563. He is tenacious these to be readable. Thanks in advance for any help you can give, Marcy

  For anyone having problems with this I want to post my solution. The problem was that I had the menus in an Accordion widget and it's what limits the image quality. When I gave each menu is page clean and defined the container over the entire width and image to fit to fill the image quality was back to what I was expecting. I had first to understand why the logo (which has been implemented in full-width) was not blurred but the menus were terrible, so I knew my answer.

• How can I improve the quality of the sound signal tia sal22

  Hello all

  I have a VI that plays an audio signal on a sound card, but the quality is not great in real time when I change it.  I can create the audio signal in mathematica 6 and it sounds good but labview has a few problems can anyone recommend a way to improve the way in which the qualtiy of the audio signal sounds... I need to increase buffers or allocation of memory for labview, if yes, how can I do.

  TIA sal22

  PS I'm using labview 8.2 don't fix 8.5 this problem?

  Hi sal22,

  LabVIEW 8.2.1 (which seems to be the version you're using) automatically manages the allocation of memory up to 2 gigabytes.  LabVIEW 8.5 and later supported the use of up to 4 gigabytes.

  See the following articles in the knowledge base for more information:

  The amount of memory can use LabVIEW?
  http://digital.NI.com/public.nsf/allkb/AC9AD7E5FD3769C086256B41007685FA?OpenDocument

  Using LabVIEW 8.5 - virtual memory extension for 32-bit Windows
  http://zone.NI.com/reference/en-XX/help/371361D-01/lvhowto/enable_lrg_ad_aware/

  Also, I know that some changes have been made to lvsound2.dll in 8.5, the library of your vi uses to produce the sound.  In other words, if it's really a problem of memory, that upgrading to the latest version of LabVIEW can solve the problem.  I can't confirm this for you because my ears are not only very good .  But it's worth a try if you have a copy of available 8,5/8.5.1.

• What is the easiest way to improve the operating speed?

  What is the easiest way to improve the operating speed?

  Buy a new Mac.

  C.

• How to install the driver for the webcam on windows 8 in order to improve the quality of the image

  We can use any software compatiable or the driver in VAIO SVE15129CN to improve the quality of the built-in webcam image. Please guide.

  Hello Nisar,

  Follow all the steps mentioned in the link below to reinstall the driver for the Webcam.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/37440/c/65%2C66/kW/37440

  Then perform system refresh.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/37564/c/65%2C66/kW/37564

  Then, perform a recovery system to factory settings.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/36806/c/65%2C66/kW/36806

  Note: It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact the Sony team in your country to launch the service.

  If my post answered your question, please mark it as an "accepted Solution".

• I've upgraded to IE9, how can I improve the quality of my picture of the webcam for video calls?

  I've recently updated to IE9.  The quality of my web cam image is dark and resolution of RL is unrecognizableand similar to the shadow.  How can I improve the quality of the image during video calls, for example over Skype or yahoo?   I have a Toshiba door 'ge'.

  Hello

  1. What is the number of brand and model of the computer and the webcam?

  2. What is the operating system installed on the computer?

  Try to uninstall then install web camera drivers and check if the problem is solved or not.

  Uninstall or change a program

  Note: this article applies to Windows Vista and Windows 7

  Also check out the following link:

  http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly (Applicable to Windows Vista and Windows 7)
   
  Let us know if the problem is solved or not.

• What is the best way to improve the performance of this all-in-one PC?

  What is the best way to improve the performance of this all-in-one PC?

  Thanks in advance.

  David Barrett.

  Here are a few methods:

  • Run msconfig.exe, and then uncheck the startup tasks that you don't need. No matter what you disable, Windows always starts.
  • Use a light virus scanner, for example Microsoft Security Essentials.
  • Replace your magnetic drive with a Solid State Disk (SSD)

• How to improve the quality of the preview in Photos

  Recently, I started to use e/s of Photos in iPhoto. After having converted database of iPhoto in database of Photos, the quality of the preview of the Photos of that which is in iPhoto.

  However, when I imported new photos by map SD pictures, I found that the quality of the preview (small images) of newly imported photos image is extremely low compared to iPhoto. And when I click on the preview pictures of large size photos, it take some time to get clear pictures, not like iPhotos that can get clear pictures instantly.

  Is it possible to improve this situation. I already started to run out of iPhoto, but unfortunately, there is no update by Apple in the future.

  Please help with kindness.

  Is it possible to improve this situation. I already started to run out of iPhoto, but unfortunately, there is no update by Apple in the future.

  Using iCloud photo library?

  "With iCloud and optimize" storage "enabled, you will only seethe optimized versions, until the full original size has been downloaded from iCloud.

  In addition, the generation of previews takes awhile. It helps to keep the Photos during the night to get all the background treatment after you have imported new photos.

• Best way to improve the overexposed skin tones?

  Best way to improve skin overexposed in Premiere Pro tones?

  Just uncheck the 'Clamp Signal' and see if there is anything above 100, or if there's just stable.

  PrPro, there is an intriguing situation in the Lumetri Panel..., they're trying to uh... well think you want now... "user-proof '... UM... so the "Basic" tab won't let you push anything above about 98 or less than about 2. And... you won't bring back something over 99 or lower to 1.

  However, the creative curves & color wheels tabs allow to pass the signal off limits to. If you have the detail there, you can use curves or portions of the color wheel to move these data. I go to the climax wheels, the cursor beside him luminance color wheel and pull that down some, see what you get.

  In addition, there is a blue spike WAY outside the "legal" saturation You might be able to find this peculiar tint using the Committee Lumetri wheel and parameter related to the clique on a point or two on each side, rear-wheel drive "legal." I am more comfortable FORCED secondary for more SpeedGrade, but then... In fact, I love this app!

  Neil

• Improve the quality of the image after scanning

  Hello
  
  Environment: ECM 11.1.1.6
  
  Is it possible to improve image quality after scanning? ECM have a specific component or function to manipulate the quality of the images?
  
  Kuba

  Not sure if I understand.

  If you use ODC index / commit images scanned in the University Complutense of MADRID, then you have different options to clean up the image digitized, before committing.
  Like, removing punch holes, cropping, smoothing by removing noise sound black, etc.

  Kind regards
  Pradeep Mahajan.
  http://ucmchronicles.WordPress.com

• I have the computer laptop dv7 - 7227cl of HP Envy, is there a way to improve the performance of game?

  I have windows 8.1, 8 GB ram, amd quad core 4600 a10 m. Is it possible to increase its performance?

  Hello

  You seem to have pretty good specifications in the laptop.

  Even so, I prefer Intel than AMD processors.
  Try playing in low & medium resolution.

  You can go through this document, it can help you in improving the performance: http://support.hp.com/us-en/document/c03340676

  Thank you

• What are some ways to improve the design

  I'm looking for ways to improve my website, ideas logo?

  Try Adobe Design communities:

  Design and development

• improve the quality of the image full screen?

  Hello

  full screen ctrl + o is really very fast and light, but the picture quality is not great

  can I improve it?

  Thank you

  Hi Giovannivolonte,

  where is quality popup menu?

  Click the key icon in the program monitor and select "high quality of reading."

  

  Thank you

  Regalo

• Is there anything I can do to improve the quality of the .jpg image?

  I'm working on a project for a client and the only files that were provided are low quality .jpg images. I already brought up the ppi to 300, but as with all .jpg images, there is only for many this can be done, I'm afraid.

  I just wanted to check with the community to see if there is some advice that I might have missed. I want to make sure you have covered all the bases.

  P.S. I am these cutting and exporting to PNG files. Then maybe there is a way to at least soften the edges of the cut?

  You cannot create information after it has been packed away, but you can remove the checkerboard patterns and artifacts of mosquito with a plugin like "Topaz" DeJepeg https://www.topazlabs.com/dejpeg I use it all the time and can't say I've seen any other plugin do a better job. Its about $30, but they give you a free month assessment. The images are inevitably more soft, but you can always sharpen them.

  Terri

• Is there a way to improve the performance of cmdlet New-AdvancedSetting?

  I used PowerCLI 5.5 on a server to update ESXi 5.0 3.  It seems to work ok, but the New-AdvancedSetting cmdlet is very slow.

  I implement VMX settings in the guide for each of my virtual machines VMware hardening.  Things like:

  insulation. Tools.Copy.Disable = TRUE

  isolation.diskShrink.diable = TRUE

  log.keepold = 10

  log.rotatesize = 10000

  etc there are about 50 parameters

  I can read all the key/valules from a file and put successfully using the New-AdvancedSetting command (thanks, Luc relaxing!):

  {foreach ($option in $OptionList)

  New-AdvancedSetting - $vmObject entity - name $option.key-$option.value value - confirm: $false - ea 0 - force | Out-Null

  }

  Updated the VM settings, but it is very slow.  It takes 5 minutes to adjust these settings.

  Is it possible to speed up this process?  Is this a side effect of my mixed environments?

  Thanks for any help,

  Maureen

  The only way I can see to speed the process is to use the underlying ReconfigVM method directly.

  The advantage is that you avoid any fresh cmdlet generals, but also and especially that you can specify all the advanced options at one time through the ExtraConfig property in VirtualMachineConfigSpec object.

  An option of the cmdlet should have

  Try something like this

  $opts = @)

  Options.csv Import-Csv - UseCulture | %{

  $opt = new-Object VMware.Vim.OptionValue

  $opt.key = $_. Key

  $opt.value = $_. Value

  $opts += $opt

  }

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec. ExtraConfig = $opts

  Notice-EEG - ViewType VirtualMachine. %{

  $_. ReconfigVM ($spec)

  }

  This assumes you have a CSV file that contains all the options, and that looks like this

  "Key", "value".

  "isolation.tools.copy.disable", "true".

  "isolation.diskShrink.disable", "true".