We are not able to enable the Arabic language in R12.1.3

Similar Questions

• Whenever I have check the regional settings to enable the Arabic language (from right to left), I get a dialog box insert the CD I did not!

  Hi Srinivas

  I have the same problem, my company is located in Singapore and I ' am assigned to Saudi Arabia, and I need enable the Arabic language (from right to left).  Whenever I have check the box in the locale, I get a dialog box insert the CD I did not!

  Now, is there a link I can use to download this file, preferably through your site (to not be deceived by the other download sites) even if its price?

  Thank you

  Sammi

  http://support.Microsoft.com/kb/821080

  You need your XP OS CD it can work if you borrow one.

• Not able to enable the web server in exe

  Hello

  I have a problem with starting a web server. I Vi which allow the address of the directory to be published and after that it makes the stream server. And there are a few jpg files and some html files in the directory. And jpg files are attached to html files. And then there are a few vi which adds the other façades Vi:s of images. And that the program runs the image files in the directory on the server are written (updated). So the point is access through a Web browser on the site where some hyperlinks and behind links that there are photos of a few front panels. And my applications automatically updated images.

  Problem is that the server will not go when I've built and run the application. In the development environment, it works perfectly. I tried this on another PC too, but the exe will not connect to the server on one of the computers.

  Need help, thank you

  There is the attached web server startup file.

  Version is 8.2

  Hello!

  http://digital.NI.com/public.nsf/allkb/3B2160B128EE09A886256B60006FFA66

  Run in LabVIEW application to run Web server is different from the development environment. Please, look at the link above and try it if she could help you.

  ARO

  Do Nguyen

  National Instruments technical support

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• Error-Windowssetup could not copy the appropriate files. Not able to install the Japanese Language Interface software.

  Original title: __Installing Japanese language.

  Im trying to install Japanese language, I get an error message stating "windows".
  Setup could not copy the appropriate files"when I
  apply "install files for East Asian languages".

  Even when I insert the CD, the message always appears.

  Hi Robin.Q,

  It seems that implemented the software Interface of Japanese language files is corrupted.

  You can try to download and manually install the Japanese language of this link Interface software.

  http://www.Microsoft.com/unlimitedpotential/programs/LLP.mspx

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System crashed, and we are not able to activate the Photoshop license

  Hello!

  We bought a photoshop and used in both systems with special request but unfortunately our two computers obtained is crushed and we cannot activate in other systems. Kindly help us.

  Hello

  You need to contact adobe to address so they can reset your activations:

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

• MBR is corrupted, not able to repair the MBR and get error code 0 x 490

  Original title: MBR is corrupted

  MBR is corrupt repair action: repair disk metadata - result: failed - error code = 0 x 490

  Hello

  According to the description, I understand that you are not able to repair the Master Boot Record (MBR) and getting the error is 0 x 490.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: Execution of restarting the Windows recovery environment (WinRE)

  To run the repair to start the Windows recovery environment (WinRE), follow these steps:

  1. Insert the Windows installation disc in the disc drive, and then start the computer.

  2. When the message press any key to start from the CD or DVD is displayed, press a key.
     If your PC does not automatically detect the media

  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.

  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.

  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.

  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.

  1. Select a language, a time and a currency, a keyboard or input method, and then click Next.

  2. Click on repair your computer.

  3. In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.

  4. In the System Recovery Options dialog box, click on repair your computer.

  5. Click the operating system you want to repair, and then click Next.

  In the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files): https://www.Microsoft.com/en-us/software-download/Windows7?WA=wsignin1.0

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

• Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

• Click repair your computer.

• Click the operating system you want to repair, and then click Next.

• In the System Recovery Options dialog box, click command prompt.

Type Bootrec.exe, and then press ENTER.

See the following link for more information:

How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

http://support.Microsoft.com/kb/927392

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• Not able to use the graphics drivers

  Original title: NVIDIA GEFORCE 630 M - 1 GB

  Hi, on my computer laptop there are two small stickers, reads: NVIDIA GEFORCE 630 M - 1 GB, the other reads as follows: NVIDIA OPTIMUS TECHNOLOGY (autonomy - excellent performance).

  Now in Windows 7, I can go to the Control Panel - programs - uninstall a program. At this location it allows me to repair the programs too. At this point, I clicked on the following: NVIDIA GRAPHICS DRIVER 295.55, a box appeared in the middle of my screen entitled RunDLL. Inside of this box it read: there was a problem starting C:\program NVIDIA Corporation\Installer2\Installer.0\NVI2. DLL. the specified module could not be found.

  I tried Windows Update and also search and solve problems, but they did not work. On Google I found the NVIDIA site, but couldn't work out how to solve the problem, so any help would be appreciated.

  Thank you

  JIMOA

  Hello

  Please contact Microsoft Community.

  I understand that you are not able to repair the NVIDIA graphics driver, so let me help you on this question.

  Please answer the following questions so that I can better help you:

  1. why you try to fix the graphics driver?

  2. What number you are confronted with the graphics?

  3. have you uninstalled all programs before?

  I suggest to try the next step and check to see if it helps:

  NVIDIA Optimus technology intelligently optimizes your notebook PC, providing the outstanding graphics performance you need.

  Please visit the below mentioned link for more details:

  http://www.nvidia.com/object/optimus_technology.html

  You can download the latest version of the driver NVIDIA graphics from the link below:
  http://www.nvidia.com/download/driverResults.aspx/79528/en-us

  Please let us know if you need assistance, we will be happy to help you.

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• Not able to add the snapshot file to the virtual machine

  We have Win 2003 virtual machine running on ESXi 4.0.0 261974. The virtual machine has two vmdk files. We had taken the snapshot a few days back and today by mistake, we have removed one of the vmdk (DB - srv - 000001.vmdk - snapshot file). Now, we are not able to add the snapshot file to the virtual machine. When tried to add the existing vmdk, it displays only the source disk (DB - srv.vmdk). Please, help us to solve this problem.

  The GUI allows only adding the base vmdk. To add the Flash disk, you must manually change the vmx file. Registrations for the formerly removed virtual disk could still exist in the vmx file with... .present = "FALSE". After changing the vmx file you must reload the configuration. To do this, remove the VM of the inventory and add it back again (right-click on the vmx file).

  André

• Not able to specify the location of file

  Dear all
  
  I use PCM 13.1 and we are not able to specify the path to the file by using the PCM admin login page, when I open in the browser and that goes to content management and click on the name of the project, and then Add specifies the location of the folder, I can put the name of the location but when I try to insert in the location of the file that I can't type or the pop-up window does not come to specify the location of the path I checked IE and other browsers but same effect, I also PCM site added to trusted sites and must change is low security, disable all POP-UP blocker. but no results, someone has an idea
  I thank in advance

  I had the same problem, it is with Java JRE installed on the machine.
  I uninstalled Java and installed Version 6 Update 26 and it worked fine

• I am not able to hear the sound even if my drivers are installed properly in windows 7

  I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
  I have media chip c with creative 5.1 speakers.
  until this works perfectly...
  I am facing this problem since I made a mistake.
  only, I went to run and went into 'msconfig '.
  After that, I marked start diagnosis then applied
  After having no repeat no sound...
  and then I clicked on normal start, but still I can't get my sound help please

  Hello

  1. What is the brand and model of your computer?

  2. this issue occurs when access to a particular file by using Windows Media Player?

  3. do you see red X on the volume icon in the notification area?

  4. are you able to access the files of music from the original location?

  You can follow the suggestions and then check.

  Solution A: For sound program on your computer.

  Method 1

  You can follow the steps listed below:

  a. right click on the volume icon in the notification area.

  b. go to the playback device and right click on the empty area.

  c. Select Show disabled devices and Show disconnected devices.

  d. right-click on the pregnant , select Activate and go to the Properties.

  e. use of the device select use this device (enabled)

  f. click apply and OK.

  Method 2

  Make sure that the Windows Audio service is started.

  a. click on start.

  (b) in the search box, type services

  c. right click on Windows Audio and go to Properties.

  d. Select Automatic from the Startup type drop down.

  e. click on start.

  f. click apply and OK.

  g. restart the computer.

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Solution B: Due to Windows Media Player.

  Method 1

  You can run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2

  You can address everyone on the file.

  a. right click on the file and click on Properties.

  (b) in the Properties window, click on Security tab.

  c. now, click on Edit , then click on Add.

  d. now, type everyone in the box and click OK.

  e. then check the full control box.

  f. click apply and then click OK

  See also:

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

• Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

  Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.
  
  So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.

  
  

  If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.

  
  

  I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.

  I hope that helps some of you save a whole day unnecessarily.

  Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.