We will seek answers to generic host process win32

Similar Questions

• Message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no sound more until I reboot

  I have a hp Pavilion working with XP but recently I installed Windows Office 2007. Since then, I have problems with the sound system. I got a message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no more sound. I can't open the volume control as the system says that nothing is installed. I always need to restart my computer to get the sound working again. Help!

  Thank you, Jerry. I'll try it, but for now it works well. I fit it and it seems to have done the trick.

  See you soon,.
  Karine

• status of landmark HP + generic host process for the + serious mistake WMI + system configuration utility + ALG pop-up messages

  I have a desktop computer, with Windows XP. He has a very good performance for 4 years. But in recent days, some of the messages appeared, and suddenly, the computer restarts. and if she did ' t restart directly, she performed very bad (gel + slowly). 6 messages appeared, they are:

  1 - generic host process for win32 services has encountered a problem
  2 - problem WMI
  3 - the system has recovered from a serious error
  4 system configuration utility
  Situation 5 - hp cue has encountered a problem
  6-application Layer Gateway service
  Help, please.

  Hi Alaa' Kabbani,.

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  3. What is the brand and model of your computer?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Disconnect any new hardware

  If you have recently installed a new hardware device, the necessary driver so that the material can not be installed or the driver may be damaged or incompatible. To determine if this is true, follow these steps:

  1 unplug the appliance.

  2. restart Windows XP.

  If Windows XP starts successfully, there is a driver problem with the new material. Contact the manufacturer of the device for drivers updated to the device or to learn more about known hardware issues, so that you can reinstall the device.

  For information about how to contact the manufacturer of the device, refer to the Microsoft Web site at the following address:

  http://support.Microsoft.com/GP/vendors

  (http://support.microsoft.com/gp/vendors)

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If this method resolved the issue, you are finished. If this method does not work for you, go to method 3.

  Method 2: Disable automatic reboot in case of system failure

  If the system reboots continuously, do the following:

  1. reboot the computer.

  2. as the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  3. use the arrow keys to select disable automatic system error rebootand press ENTER.

  4. If you receive an error message, follow these steps to search the Microsoft Knowledge Base for useful information about the error message:

  a. copy the text of the error message.

  b. visit the following Microsoft Web site:

  http://support.Microsoft.com

  (http://support.microsoft.com)

  c. type the text of the error message in the Search box, and then type the name of the product you are using, for example "Windows XP".

  d. click on Searchand try to find an article that will help you solve your problem.

  If this method worked, you have resolved the problem of your computer restarts continuously. However, you can continue to troubleshoot driver problems. See the "Symptoms" section again and determine which method to use to solve the problem.

  If this method worked, you are finished. If this method does not work for you, please try Method 3.

  Method 3: Use the known last good Configuration feature

  If you can start the computer successfully, you can use the known last good Configuration feature. This feature uses information that was saved the last time that you shut down the computer before the problems started. This feature allows to restore your registry settings and drivers to the previous information.

  If you are not completely sure what that means, don't worry. None of these reviews will damage your computer. However, you should be aware that if you do this, any changes made to your computer after the date of last known good configuration will be lost.

  If you have recently installed a driver and know a configuration problem, this method will probably work for you. Unfortunately, this feature does not solve the problems caused by missing drivers or corrupt or files.

  To use the last good known Configuration, follow these steps:

  a. restart the computer.

  (b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  c. use the arrow keys to select last good Configuration known (your most recent settings that worked), and then press ENTER.

  d. If you are prompted to select an operating system, use the arrow keys to select the operating system and press ENTER.

  If this method worked, your computer is restored to a good working state. You still have to investigate on what caused this problem. To do this, please see the "Next steps" section for troubleshooting resources more.

  Also refer to this link: Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=G1iW6Kb0x5J

  WARNING CHKDSK:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you have trouble following the suggested steps or if the problem persists, please let us know and we are ready to answer them for you.

• On startup, I get the following error message: Generic Host Process for Win32 Services error

  I received the following error message: Generic Host Process for Win32 Services error on commissioning. Reading the Forums help. I have all the Service Packs and the automatic updates of Windows XP. More Norton AntiV and utilities. What can I do as I am all updated and I have Norton? KB - 894391 fix Windows Will interfere with what anyone, even if I have already? Should I run Windows Essentials?

  Thank you!

  Well, I'm quite sure that committed Microsoft Support Engineer 'expert' is just send you on another of their many wild goose hunting.

  Surely, Imran M will come up with some other ideas - it's their job and they are the ones that Microsoft hired as their "experts".

  Tell us exactly the message that see you in its entirety, follow this:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Then stand out my answer as the 'response' (which you do) for other people will see the topic is not resolved and you offer other ideas.

• "Generic Host Process for Win32 Services has encountered a problem and needs to close" to start the computer.

  Original title: Generic Host Process for Win32

  A few days earlier, when I restarted my computer, I got an error message indicating that there was an error in the Generic Host Process for win32 and we had to close the program. The only thing it really seems to have an impact on the time is my speakers. I'm not all sounds to play, but when I turn my computer off, he will play the melody of the judgment.

  I tried to fix this problem without success. I tried to install the windowsXP-KB894391 package - x86ENU.exe as indicated on the website. However, when I try to install it, I get a message indicating
  "Setup has detected that the version of Service Pack for this system is newer than the update you are applying.
  There is no need to install this update. »
  Any thoughts?

  Hello Courtney0210,

  Thank you for the question!

  I'm sorry to know that have problems you with startup error. As I understand it, you get an error to the error of starting in the Generic Host Process for win32 and that the program had to close.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates  

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience "_".

  After that I connect Internet in 10 minutes and 2 hours sometimes this messega Popes until one disconnects me Internet... I have dial up so when I try to reconnect it says does not detect a modem or a virus protection... then to start my computer acting funny i have to restart. What can I do to fix this?

  Hello

  We recommend that you reinstall the network adapter driver and check if the problem persists. To do this, visit the site of the manufacturer of the system or the network card and download the driver compatible Windows XP and then install on the computer.

  If the problem persists, try the following steps:
  Step 1: Check if a system file is corrupt
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Step 2: If the problem persists, restore the computer
  see How to restore Windows XP to a previous state .
  b. check if the problem persists.

  Also check if one of the following articles will help you in fixing the issue.
  1 displays generic host process Error Message and a flashlight icon
  2 see Generic Host Process for Win32 Services has encountered a problem and needs to close.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error message that says: generic host for Win32 process has encountered a problem.

  How a Dungeon of this box of erroe to appear several times. He said-Generic Host process for Win32 has encountered a problem.

  Hi Swersky RB,

  1. don't you make changes before the show?
  2. when exactly you get the message?
  3 - is to start the system or download/install something?

  Please provide us with more information on the issue, so that we can better help you.

  Check if all the following articles will help you in fixing the issue.
  1 displays generic host process Error Message and a flashlight icon
  2 see Generic Host Process for Win32 Services has encountered a problem and needs to close.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "Generic Host process for Win 32 services has encountered a problem and needs to close." Sorry for the inconvenience. "Please tell MIcrosoft this problem."

  Original title: programs appearing and disappearing

  Generic Host process for Win 32 services has encountered a problem and needs to close.
  Sorry for the inconvenience.
  Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
  Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
  Error report or not send.
  I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
  szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.

  Hi 1jimbo1,

  1. when exactly you receive this error message?
  2. did you of recent changes to the computer?

  Method 1:

  Step 1:

  You can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If the problem does not happen in safe mode and then, try to perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 2:

  You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

  http://OneCare.live.com/site/en-us/default.html

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Getting started battery generic host process failed

  When I boot on battery ' '(prévention de l'exécution deles de données) DEP closed generic host for Win32 Services process.

  I got a blue screen initially but the gv3.sys driver under the intelppm.sys processor Intel Pentium M.

  I'm not no longer have the blue screen, but the problem of home Gen is still there...

  Hi enos

  I don't know if this forum is the right for this kind of problems. First of all, it will be interesting to know what model of laptop you have and if SP2 has been pre-installed on your device.

  I guess you have a lot of experience but just a site interesting to Microsoft
  http://support.Microsoft.com/kb/875352

• How to stop a pop up called GENERIC HOST PROCESS for Win32 Services.

  My girlfriend told me to make sure that my computer is Service pack 3 and she told me how to tell by going to START and in RUN type winver. I did it and I don't know

  If it is only a coincidence, but every time I turn on the computer this windo appears

  who says GENERIC HOST PROCESS for Win32 Services. That there is a problem

  How can I stop this?

  @Cookie: I did not reply to your previous post because you not answered all my questions. That being said...

  You see the effects of a hijackware infection.

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the error "Generic host process for Win32 services has encountered a problem and needs to close."

  Original title: I'm under Win XP Pro 64-bit with an amd processor.

  Hi all

  I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work?  Don't forget that I'm running 64-bit software.

  The search does not work.

  Any help would be great.

  Hi bohawk,

  I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.

  I hope this helps. If this isn't the case, answer so we can look for other options.

• Generic Host Process for Win32 Services

  I get the Generic Host Process for Win32 Services has encountered a problem message whenever I have use standby or hibernation and then restart. All the forums that I can find and article say "this problem only occurs in the Microsoft Windows XP Service Pack 2 (SP2)." but I'm already on the SP3.

  Feature: Dell Latitude D830

  OS: XP Professional

  Version: 5.1.2600 Service Pack 3 Build 2600

  I doubt sincerely tried these "methods" help you at all (like most of the 'methods').

  In addition, you need to 'do' not ' trying '.

  First I would make sure that your system is reasonably free malware as follows:

  Download and run TDSSkiller from Kaspersky Lab:

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Then:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

  If you still have problems, follow these steps:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Now make some clarifications:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Generic host process for win32 services has encountered a problem and cannot update windows

  Whenever I start my computer, I get this error message "generic host process for win32 services has encountered a problem and needs to close." The details of this problem are:

  (szappname:svchost.exe), (szappver:5.1.2600.5512), (szmodver: 0.0.0.0), (offset: 001 has 6240), (szmodname: unknown)

  c:/DOCUME~1/owner/locals~1/temp/wer94ea.dir00/Svchost.exe.mdmp

  c:/DOCUME~1/owner/locals~1/temp/wer94ea.dir00/appcombat.txt

  I also send an error report whenever this happens.

  The computer is running XP, but lately some settings have been changed such that the display is windows classic instead of XP.

  In addition, I can't run Windows Update completely. It freezes / hangs up in the middle of the update. I have also no audio.

  Please help, I ran SuperAntispyware, Spybot, and Avira. I'm lost!

  Reinstalling the operating system is unable to solve your problem. There is no need to do this if the problem is not related to the operating system and you find that you are back where you started.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• for win 32 generic host process services

  How can I fix this error... there two my PC freezes at the point of having to unplug the computer.

  Hi tapperjo,

  ·        When exactly do you get this error message?

  ·        What is the full error message that you receive?

  ·        You did it of any material changes or software on the machine prior to this problem?

  ·        How long you have been facing this problem?

  This problem may occur if you use an old HP printer driver or an old HP scanner driver.

  If you are using an HP printer, you can follow this link.

  Generic host process error message and a flashlight icon appear

  To improve the performance of the computer, you can follow this link & check if it helps.

  Restore the performance of your computer with Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.