What about KB971033: this update will be included in Windows 7 Service Pack 1.
Seeing that it is an optional update, this will be included in Service Pack 1? I've searched and can't seem to find an answer.
Thanks in advance for anything that helps.
The general rule for service packs must include all the updates/security reviews as well as some bug fixes still undisclosed.
Never be afraid to ask. This forum has some of the best people in the world to help.
Tags: Windows
Similar Questions
-
(1) there was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?
(2) where can I find so that I can then reinstall windows XP, updated to sp1, install the patch to see the complete player to sp2 and 3 can be installed?
original title: supervision XP
Maybe the disc has been formatted as part of your original installation of Windows XP with a pre - SP1 version of Windows. At that point, he could only format the drive as 137 GB. After you upgrade to a post-SP1 version of Windows, look at your hard drive with Disk Manager (start-> Run-> "diskmgmt.msc"). It can show the rest of your unused space that you might then be able to allocate in a second partition.
If you want to keep one big partition, you will need to get a 3rd third party tool that can extend your current 137 GB partition to use more of the available space. Google for it, plenty of them out there including those that are free.
HTH,
JW -
original title: could not update - Windows Vista Service Pack 1 (KB936330)
Impossible to update - Windows Vista Service Pack 1 (KB936330)
Installation status: failure.
Error details: Code 80070017
Hello
Please follow the steps mentioned below to help resolve the problem with the installation of the service pack.
Method 1
Start your computer in a clean boot
http://support.Microsoft.com/kb/929135
Note: Make sure that you follow step 7 of the article mentioned above to set the Normal upward Start computer after troubleshooting is completed.
Try to install the service pack.
Method 2
Run a System File Checker tool
http://support.Microsoft.com/kb/929833
Method 3
Reset the contents of Catroot2 folder / rename the software distribution folder
Step 1
Reset the contents of the Catroot2 folder
a. type the following commands and press ENTER after each command:
· net stop cryptsvc
· MD %systemroot%\system32\catroot2.old
· xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2
b. remove all content of the catroot2 folder, but do not delete the catroot2 folder.
c. type the following command and press ENTER:
net start cryptsvc
d. close the window command prompt
Step 2
Rename the folder C:\Windows\SoftwareDistribution
a. open a window prompt administration commands.
b. run the following commands and press ENTER after each command:
· Net stop wuauserv
· CD %SystemRoot%\System32
· Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
· Net start wuauserv
Try to install updates again.
Important When you use this method, the following problems occur:
· Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
· When you remove the Software Distribution folder, your download history is deleted.
· If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.
Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.
Restart the computer and verify if you are able to install the Service pack.
Method 3
You can also run as the automated fix this program to reset the Windows Update components.
http://support.Microsoft.com/kb/971058
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
Method 4
Alternatively, you can try to install the stand-alone version of the Service pack and check if it installs fine
https://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30
Hope this information helps.
-
I think I have problems arising from the Windows updates do not install it.
I can't uninstall all the programs already on the computer - I get the message "Please wait while the current program is finshed uninstall or changed" on every single program.
Also, anything with an authorisation button freezes as son as I click on it without the authorization window popping up. for example. the clock or the managed task advanced details.
This has led to problems trying to install other software for example. I tried to install a game that failed, because the .NET framework 4 would not install.
Help!
Hello
You can follow below link that can help you to solve your problem:
Troubleshoot installing or uninstalling programs
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
I suggest you follow the steps in the Microsoft KB article for your problem of update.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
-
"speaker" icon will not appear in windows xp service pack 3
I have windows xp SP3 installed. Lately, I noticed that my "speaker" icon has disappeared. searched the web and found the direction to go to control panel, sounds and audio devices and make sure that "place volume in the taskbar icon is selected. This is the case. Simply said nothing has changed I know except that I accepted upgrades of various programs, for example, Skype, adobe reader software, etc. I can't say when the icon disappeared. The problem is widely reported. If you have a solution please point me in the direction. Thank you
Disappears from the sound icon, run this Microsoft Fixit http://support.microsoft.com/kb/319095
-
Windows vista service pack 1 will not update. I get Error 80070002.
Vista - install a drive - error 80070103
I am trying to install a disc and it says I have error 80070103
I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002
Hello
See if that helps you.
"Windows Update 80070002 error."
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
"If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »
And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
Or you can repost you this link in the Windows Update Forum.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
See you soon.
-
Original title: IE8 Cumulative security update cannot be installed on Windows XP service Pack 3? Why
The recent update of security for IE8 fails to settle in my computer with windows XP Professional Service Pack 3.
Hi M.N.PAI,
Have you tried the methods mentioned above in my previous post?Thank you for keeping us posted about the State of the question.Follow the steps mentioned below and check if that helps.1. change the options of folder on the computer to view the files and hidden folders. To do this, follow these steps:a.Click Start, click run, type explore , and then click OK.
b.On the Tools menu, click Folder Options.
c the view tab and then click on view the hidden files and folders in the Advanced settings list.
d.Click applyand then click OK.2.Locate and then open the following hidden folder:
%windir%\$hf_mig$Note The %windir%\System32 folder is the folder where you installed Microsoft Windows.3 delete the Update folder that you are trying to install, and then reinstall the update of .
4. change the options of folders on the computer is not to display the hidden files and folders. To do this, follow these steps:a.Click Start, click run, type explore , and then click OK.
b.On the Tools menu, click Folder Options.
c the View taband then click on do not show hidden files and folders in the advanced settings list.
d.Click applyand then click OK.Hope this information helps -
I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.
It will help in cases where the applications require more than 4 GB of RAM. Otherwise, there will be no noticeable difference. If you really want to increase the speed, an SSD is the best option. They cost about 3 x's + more than a traditional HDD of same capacity...
Ciao.
-
will not update and install windows xp service pack 3
try to load turbo tax but disc will not load because it displays windows xp service pack 3 is required to load. I failed to load this update on my computer
I failed to load this update on my computer
And the reason why you did not...
FYI
Release notes for Windows XP Service Pack 3
http://support.Microsoft.com/kb/936929The space of hard disk required for Windows XP Service Pack 3
http://support.Microsoft.com/kb/947311Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389Windows XP Service Pack 3 - file to Image CD ISO-9660:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=enWindows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en -
Every thing downloads and prepares to install, the installation begins and the box pop up advises to close all programs and installation can last an hour or more with many stops of the computer. I followed the instructions but it still fails.
Error 0x8024200D code is:
SUS_E_UH_NEEDANOTHERDOWNLOAD
The Setup program requires more data to downloadSee: http://support.microsoft.com/kb/948465 for more information
and
Learn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspxCan download the complete file here (for single pcs too)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en TaurArian [MVP] 2005-2010 - Update Services -
Code800F900 'unknown error in windows update' trying to download windows vista service pack 2
try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter
* Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl
Why did you delete your post where you said that Norton application has been installed at some point in the past?
There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!
Let's cut to the Chase. See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxTip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I tried to update to windows, but get error 80070490 that says I have a corrupted file (CBS Manifest) that is to be updated... so I check the error and it says to uninstall windows and reinstall using the dvd... but I don't have the dvd for windows vista service pack 2... I have the id... product help, my pc is done to the breakpoint until I make updates! I tried Fix - It, and it says error can not continue... I ran to day thought advise that I could upgrade to windows 7... but apparently so that I can fix the problems of windows, I'm stuck. Thanks for any help!
Hello
Error code 80070490 claims a repair upgrade install, not an uninstall and clean reinstall.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490
If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.
Have you tried the other option for system update readiness tool in the link I just gave you?
The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.
And you need a DVD of Vista from Microsoft to do a repair installation upgrade according to the instructions, NOT the normal manufacturer's recovery disks.
You will need to borrow a Microsoft Vista DVD from a friend or working knowledge.
Here's how a repair upgrade installation:
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And if you can't get a loan from a Vista DVD from Microsoft, you may need to do a reinstall of Vista:
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
See you soon.
-
Cannot install windows vista service pack 2
http://support.Microsoft.com/kb/958044
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.
Note Run a repair installation will not damage files and applications that are currently installed on your computer.
To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:
- Close all applications and restart the computer.
- Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
- In the settings window, click install now.
Note If Windows does not automatically detect the DVD, follow these steps:
- Click StartCollapse this includes this image
and then type Drive: \setup.exe in the box start the search .
Note The placeholder drive is the drive letter of the computer's DVD.
- In the list of programs , click Setup.exe.
- In the settings window, click install now.
- Click Start
- Click connect to get the latest updates for installation (recommended).
- Type the CD key if you are prompted to do so.
- Click Yes to accept the Microsoft software license agreement.
- On the which type of installation do you want? of the screen, click upgrade.
- When the installation is complete, restart your computer and try again to install updates.
If the above does not resolve the problem:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.
error 8007090
I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem
Hello
Are you sure this is the error Code?
And not this one?
It is the opinion of Microsoft about the error code 80070490.
'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'
http://support.Microsoft.com/kb/958044
Method 1: run (Checksur.exe) system update readiness tool
- Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.
For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821
(http://support.microsoft.com/kb/947821/)Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
- Try to install updates again.
Method 2: perform a Windows repair installation
If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.
If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.
"This has occurred as soon as I updated from Windows XP"
You have the upgrade DVD?
Here is a tutorial on how to do it:
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
- Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.
-
Windows Vista Service Pack 2 updates
I want windows to automatically download updates. I have my pc set to automatically download updates every day at 01:00. However, when I turn on my pc at about 09:00, he lets know me there are updates, but it will not install automatically. I install manually. As soon as I install manually, I get another notfication within 30 seconds, advising there is of new updates. Is there a way that my pc will automatically install updates without having to manually install every 30 seconds I? The update is called Windows vista service pack 2. If I continue to update when it warns me, there is no end to the amount of updates that 1 day ago. This can be corrected?
sbird,
see the following topics
(1) read this firsthttp://windows.microsoft.com/en-us/windows7/Understanding-Windows-automatic-updating
then apply the following
(2) the same applies to vista / read and implementhttp://windows.microsoft.com/en-US/windows7/Change-how-Windows-installs-or-notifies-you-about-updates
free unlimited installation and compatibility support is available for the windows vista SP2 until August 30, 2010 issues.
availability of support chat or messaging differs depending on your location.
some questions may require that more support for which he is advanced a charge.
go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 and select the appropriate category (i.e., download problem; installation problem problems after installing a service pack).
Maybe you are looking for
-
Export of large amount of Photos App Photo
I have a large disk RAID (6 to) and work to consolidate all my media here. I already have other media on the drive, but want to move the photos I have in iCloud. There are approximately 9500 photos and 200 video files that have resulted in about 35 G
-
The SmartScreen filter - how to resolve a false report?
I am a webmaster and was alerted by a user our Web site reported as 'dangerous' by the SmartScreen filter. I went through the FAQ but I can't find a link to the designated form, which allows you to report a false positive. He gives instructions to th
-
See previews of clip on the timeline
First, we need to expand the track to see what the first frame of the clip on the timeline.There where even if it is reduced, it will show a clip of the song? FCP 7 showed them, but it seems that I can onlysee images of clip on the slopes if I expand
-
This is the Web site www.vuzetasrl.comSometimes on my mac and even in my mobile.PS It is actually happening to the client and to everyone except me. I can go back even on my phone and I have a samsung. Tried on my iphone of bf and he doesn't either.H