What are the effects of the clearing the browser Cache?

Similar Questions

• What are the optimistic Caches? They are not suitable for OLTP?

  where are the optimistic Caches? I think that they are not suitable for OLTP due its implementation without any concurrency control?

  They are used in situations requiring no concurrency control. For example, session data, transient data, some single-user data and so on.
  The use is based primarily on the Types of businesses.

• What are the files delete to free up my Media and Disk Cache?

  What are the files safely remove old projects to make my Media and Disk Cache? I use Photoshop and first, and when I installed After Effects, I got a message saying I needed free memory in this cache.

  Thank you!

  Hello

  Default location:

  Windows - "C:\Users\User_Name\AppData\Roaming\Adobe\Common".

  Macintosh - ' ~ / library/ApplicationSupport/Adobe/Common '

  Inside this place, you will find 2 files - 1. Media cache and Cache files for multimedia 2.

  If these two folders, trash, it will clear all the previous Cache.

  You can also do this in Premiere Pro, select Preferences/Media/Clean.

  

  Kind regards

  Navdeep Pandey

• Reinstall XP on Portege R600 - what are the necessary drivers?

  Hello

  I am plan to reinstall windows, since something (a driver/program/idontknowwhat) seem to access my hard drive at random times (often), which means that ever, it stops turning and still makes noise. It was already the case (but a little less than now) with preinstalled system, even with wdfrgmgr.exe disabled and without using a swap file on the hard drive, so since I don't know what are the causes (is - anyone here know?) and since it seems impossible to upgrade to an SSD, I'll just install a clean winXP install only necessary basic stuff (especially not all control panels).

  I would like to know what drivers from the Web site are essential and those that are not.
  I'll definitely install base drivers common Module, driver Display Driver LAN, HDD Protection Utility, Power Saver, his Driver, Touch Pad Driver, Webcam Driver, Wireless LAN Driver (Intel).
  I will not install (but maintaining install files on my disc for emergencies) acoustic silencer, Assist, Bluetooth Monitor, controls, cooling running Diagnostic tool, DVD player, Management Console, password, PC, PC monitor diagnostic, tool utility utility boot memory SD SD utilities, security help, SSD Alert, power utility Touchpad utility , USB Sleep & charge utility, utility zoom. I'm missing something essential (and obviously not in name) by installing is not it?

  * Now my other question: which with other drivers? I don't know what they are doing here is so my doubts since the following drivers: *.

  (1) pilot 3 G and 3 G RF power control utility: is this necessary if I never use it, or do not install the power utility will lose power (thus reducing my battery life?)

  (2) Intel Active Management Technology and Intel Matrix Storage Manager: is it necessary that the machine works correctly? I can't find the right information anywhere.

  (3) chipset utility: I am surprised it is not called driver... it is some control panel I don't need or is it actually a driver?

  (4) ConfigFree, hotkey wireless and Wireless Manager: my wireless internet will work without it?

  (5) display device Exchange & Hotkey utilities for display devices: these do what exactly?

  (6) microphone effect: is it only the echo canceller or also a necessary micro driver?

  (7) mobile Extension: what is it exactly?

  (8) trusted Platform Module: is it necessary to install this if I am not using any other explicitly related function?

  (9) public services: this product contains all I need to install the drivers? Or is it just a bunch of utilities like his name?

  Thanks in advance!
  Peter

  (1) you have not need drivers 3 G, if you do not use 3 G

  (2) Yes, you need to install these devices from Intel, they are important.

  (3) the Chipset driver is probably the most important of all drivers. Toshiba common modules is also very important. You must install these two before anything else.

  (4) Yes, we must still work. You can install the keyboard shortcut, so you can enable or disable Wifi on and outside

  (5) you need to install these, they support some features of the Fn key, so you can use an external monitor, etc...

  (6) I don't think that you will need. If you encounter problems with microphone, install

  (7) install the Mobile Extensions if you have a Port Replicator.

  (8) If you do not use the TPM encryption, simply disable it in the BIOS

  (9) you must install the utilities, so you can change the hardware settings within Windows.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• When I close a program, it seems that the page is molten! What are the causes that

  Just as I said, when I close my Internet explore the page looks as it melts down.

  When I close the Office computer looks like it is melting.

  What are the causes and how can I fix what is wrong

  I ran mcafee and malware programs.

  I have compaq presario v5000

  Windows xp

  32 bit

  do not add ons running.

  I don't see how someone can offer you promising ideas knowing more about your system.  The best you can get is speculation on what might work sometimes maybe. All we seem to know is what sort of a Presario V5000 with XP (there are a lot of different V5000s).

  It worked better in Mode safe or clean boot?  Even if it did, this does not your problem, unless you want to run mode without failure or boot for the rest of your life.

  If you restored to the factory settings in the past, then you have all your video drivers updated?  Chances are good that everything that comes out of the plant is outdated when it leaves the factory.

  If I were you, I would first take a look at your specifications and make sure that your video drivers are up to date.

  Should be considered ditching of McAfee (since it's a famous memory and CPU hog) and replace it with something with a smaller footprint like Microsoft Security Essentials (MSE).  You can simply use the McAfee uninstaller install temporarily and see how things work... you can always reinstall later if you are forced to do it, right?  (but I wouldn't).

  If you still have the problem after all and the verification of your video drivers, check the properties of your system performance (especially the Visual effects) Options.

  Why don't you do this so that we can see what you have:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• What are the basic criteria to keep a computer in good operating condition?

  HI: I asked a question before and I will say first my pc works fine and I have no problem.  I want to know, as PC users, what are the basic top of page I should or can do to keep my PC works perfectly.  First: I am a paid version of the anti-malware software and Online Armor for my firewall.  I am running Windows 7 64 bit with IE 9 - I used 10 & 11 and frankly don't like them.  I run more registry cleaner software as I think that was my fall down during the past year, why I had to reinstall my discs of recovery on 12 or more times.  Any basic help and knowledge would be appreciated as I like to learn new things - also if anyone knows of acceptable software that is allowed to run or use to keep your pc running like new thank you Dave

  Hello

  You mention AntiMalware program

  There is a free version of Malwarebytes Anti-Malware program, which works very well.

  It's also a scanner at the request, not a real-time Scanner, to make it work when you want.

  __________________________________________________________

  Registry cleaners can do more damage to your operating system any good they claim to be able to do.

  You should work only in your registry manually and then only if you know what you're doing.

  __________________________________________________________

  Here are the basic steps to take to keep your machine operating smoothly and effective:

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click all programs, click Accessories , click command prompt and then click Run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  2. Type the following command and press ENTER:
     /ScannowThe SFC sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• What are the programs should run at startup

  Paltalk I still have started from. went to windows to resolve problems by saying that I owe a lot running at startup

  Hello

  These methods allow to check what you have running at startup and use only those you need. Many
  programs will load in a start-up but really they do not need to be loaded automatically
  to work properly.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What are the best "bang for buck" upgrades for my MSI m/brd?

  Hello to you all,.
  
  
  This is post multi-question, my apologies if it is not consistent with the Protocol of this forum, I thought that it would be wiser, that post 3 different questions related to this topic. Hope somebody smarter that I can enlighten my brain electronically challenged!
  
  
  Desktop HP My p6320y came w/a updated motherboard MSI 785GM-E51 (FX) military class II. There w/4 DDR3 DIMM slots. According to the manual, I can use "dual-channel" mode What are the advantages and disadvantages between DDR2 and DDR3, & single or double channel?
  Right now, he has two modules of 4 GB memory installed in the first 2 slots (DIMMS 1 and 2)
  The manual States certainly not for Exchange DDR2 & DDR3.  So, if I want to max out my ram, & run it in dual channel mode. I need to complete all 4 slots w/4 GB DDR3 DIMMs for a total = 16 GB of RAM.
  Would execute my M/consultant w/16 GB max. two-channel mode. RAM has make my system perform significantly more fast/visibly better? Or I could use the cost of the 2 memory modules xtra in a different way to give me a clearly observable bump in performance?
  So that had him drive performance, would upgrading my current CPU (phenom quad core AM3 2.7 Ghz) to something more 3.0 Ghz, be worth the effort & produce an observable speed bump?  Or do the two would be too much to kill the M/Board of potential?
  Finally, the manual explains how overclock my FSB in 3 steps: 10%, 15%, 20%. Is this really a Hi-risk for ovr. / CLK. compared to the increase gained? Even on the low setting - 10%? Would be an additional fan counter the rise of heat, which allows a full life?
  
  
  Thank you very much for any advice, Alan

  My preference is a Samsung 840 Pro series SSD. I went from Windows from my hard drive to SSD with EaseUS Todo Backup ver 5.5 'Home' edition (Home supports cloning) which is what you need to do, in addition to your SATA I hope is set to AHCI and IDE mode AHCI is required to support the 'Trim' that all need units SSD to truly free disk space when a file is deleted.

  It was modified a Hervé 65, air, fuel injected, forced exhaust headers, great FI pistons, to the special slippers and cam, suspension, shock absorbers and transmission.

  J W Stuart: http://www.pagestart.com

• What are the differences between pga memory max session and pga session in memory?

  Hi all

  What are the differences between pga memory max session and pga session in memory?

  SELECT s.sid, n.name, s.value FROM v$ sesstat s, v$ statname n

  WHERE s.statistic # = n.statistic #.

  AND n.name = 'pga session in memory. "

  SELECT s.sid, n.name, s.value FROM v$ sesstat s, v$ statname n

  WHERE s.statistic # = n.statistic #.

  AND n.name = 'pga memory max session ";

  
  

  
  

  Note that I have read the documentation. However, it is not clearly explained.

  
  

  Thank you
  

  John Stegeman wrote:

  I agree with the comments of the Ed, NightWing.

  You do not have a story to ask questions that are clearly answered in the documentation.

  Mind your own business. If you answer the question, so answer! Otherwise, please stop the thread engrossing.

• What are the best practices for a new employee to learn inside the instance of their business of Eloqua as efficiently as possible?

  We have companies everything changed at some point in our lives. And we all go through the process in the first weeks, where you feel new and are just trying to figure out how not to get lost on your way in the mornings.

  On top of that, trying to familiarize yourself with your new company Eloqua instance can be a daunting task, especially if it's a large organization.

  What are the best practices for new employees to learn as efficiently and effectively as possible?

  I am in this situation right now. Moved to a much larger organization. It is a huge task trying to understand all the ins and outs not only society, but also of the eloqua instance, especially when she is complex with many points of integration. I find that most of the learning happens when I really go do the work. I spent a ton of time going through the programs, documentation, integrations, etc., but after awhile, it's all just words on a page and not absorbed.

  The biggest thing that I recommend is to learn how and why things are made the way they are currently, ask lots of questions, don't assume not that things work the same as they did with your previous employer.

  Download some base in place level benchmarks to demonstrate additional improvement.

  Make a list of tasks in the long term. As a new pair of eyes, make a list of things you'd like to improve.

• What are the disadvantages of choosing the 'memory' on the parameter "Performance"?

  Hi all. I am working on a project big enough in first Pro CC (on a machine with 32 GB of Ram Windows) with hundreds of media files imported and added to his scenario, with many applied effects, etc. From time to time, I get the windows ' memory low warning "I play/overview of the project in real time.

  By changing the memory of the relevant PP affecting 'Performance' to 'Memory' and restart PP which corrects and everything looks pretty good after that (no more "low-memory" warnings).

  I would just ask you what are the 'disadvantages' (it takes some for sure!) now working under this new 'memory' facility (and not under the updated and more 'Performance'). This "slow down" all functions of PP or something like that?

  Thank you very much!

  Some sequences, such as those containing the source high resolution video or still images require large amounts of memory for simultaneous multiple images rendering. These assets can force Premiere Pro to cancel rendering and give a low memory warning alert. In these cases, you can optimize the available memory by changing the preference to optimize rendering Performance for memory. Change this preference in Performance when rendering no longer need memory optimization.

  According to the help.

• Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  HI Timp,

  Sorry, but that kind of image manipulation is not for the purpose of Lightroom and more oriented toward Photoshop and retouching of composition of similar images.

  Please check the links to know the image overlay in Photoshop below:

  Mix photos with apply Image in Photoshop

  http://www.photoshopessentials.com/photo-effects/blend-photos/

  The superimposition of Images in Adobe Photoshop | DIY digital composition

  For more good result to check the google search.

  Google search: Google

  Concerning

  Sarika

• What are the symptoms of expired toner?

  I have a Laserjet 5000, which is rarely used and the toner cartridge is less than five years.

  After extended use (several months) I tried to use it, and while most of the time, it prints OK there are some problem areas on some pages where the toner does not seem to have joined with the document.

  I guess the fuser unit, but there is no toner without fuse and while some spots of ink, it is nowhere near as much as the unprinted areas would explain. Also 90% of each page is OK and the problem areas are inconsistent (even if they tend to happen more toward the bottom of the page). The effect is completely different from a nearly empty cartridge.

  I am very happy to buy a new cartridge, but do not want to lose money if there is something else wrong with the printer.

  So I'm just wondering if anyone knows what are the symptoms expected toner OOD and whether it sounds a likely cause of my problems.

  I should add that the perfectly executed printer last time that it has been used.

  can you try to check this link?

  Print quality problems

• What are the Business Catalyst Plans to treat the NPAPI issues?

  BC currently using NPAPI plug ins Google Chrome throws up an error message when Chrome users visiting a site BC. Visitors are complaining.  What are the plans at this address?

  (UPDATED) Tier 2 Support SC confirmed that the platform of the BC introduces OBJECTS NPAPI. If some appear in the HTML code, they can be removed without problem.

  Current belief is that NPAPI objects are / were inserted by a Norton Symantic application running on the computer editing.

  I can confirm that remove the NPAPI object code clears the problem and does not otherwise affect the operation of the Web site.