What eats my Ram on the application node 12.1.3
Hi all
Oracle Db version 11.2.0.3
Apps version: 12.1.3
Linux RHEL 6 64-bit
Initial demand was running on the 16 GB of ram, below the configuration:
JVM 2 1 GB for apache
1 FMV 1 GB for forms
OPP 2 GB X 5 = 10 GB
So total use was about 14-15 GB as read with the command 'free. '
I have added 16 GB added and now the RAM is 32 GB, no other configuration changes are made. But now when I run the free command, I see the output below:
You have mail to/var/spool/mail/applprod
[applprod@sfitapps01 scripts] $ free-m
total used free shared buffers cached
MEM: 32028 20265 11763 0 457 17052
-/ + buffers/cache: 2755 29273
Swap: 8190 39 8151
I only am not able to understand why consumption of memory has increased. The reason for the addition of 16 GB Ram was to make sure that we have enough space to add additional OPP handlers if need be, but I only am not able to understand why it has increased. In addition, its all consumed by applprod user and not by another user.
Please suggest. It's very confusing.
Concerning
Karan
Hello
Hope this helps you understand where your ram
http://www.linuxnix.com/2013/05/find-RAM-size-in-linuxunix.html
http://ServerFault.com/questions/85470/meaning-of-the-buffers-cache-line-in-the-output-of-free
Concerning
SANAE
Tags: Oracle Applications
Similar Questions
-
How can I find out what type of ram and the amount, maximum I can add to my: xp professional 32-bit PC?
Thanks, GregCY
Original title: RAM
Fastest and easiest is to go to http://www.crucial.com/systemscanner/ and download and use the scanner.
-
How the application node to migrate EBS 12.1.3 Solaris 10 to Solaris 11
How the application node to migrate EBS 12.1.3 Solaris 10 to Solaris 11
Issue slipped, after the application 12722501 'apache cannot be brought on solaris 11' Patch as 10.1.3 home Oracle using opatch and after that, run the autoconfig on appstier.
Thank you all for help!
Concerning
Adnan
-
Setup R12.1.1 to the application node error
Hello
R12.1.1 on OEL 5.3 installation (installation of 2 knots)
8AT node 2, it gave the error to the post install check... *.
given the content of the log (node2) installation file below...
----------------------------------------------------------
Log level apps
AutoConfig completed with errors.
Enter the password for user APPS:
The log file for this session is located in the: /ahcapps/oracle/ahcprod/inst/apps/ahcprod_ahcprod/admin/log/12240043/adconfig.log
AutoConfig completed with errors.
Cannot run AutoConfig on the applications node
known applprod - c ' / ahcapps/oracle/ahcprod/inst/inst/apps/ahcprod_ahcprod/temp/adrunat.sh ' succeeded
instantiate the file:
Source: /patch/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest: /tmp/tmpahcprod_ahcprod.xml
instantiate the file:
Source: /tmp/tmpahcprod_ahcprod.xml
RW-50011: error:-connection Apps ORACLE_HOME test returned an error: 2
The environment file
-----------------
File Apps ORACLE_HOME environment passes variables instantiated test:
File = /ahcapps/oracle/ahcprod/inst/apps/ahcprod_ahcprod/ora/10.1.3/ahcprod_ahcprod.env
iAS ORACLE_HOME environment file passes variables instantiated test:
File = /ahcapps/oracle/ahcprod/inst/apps/ahcprod_ahcprod/ora/10.1.2/ahcprod_ahcprod.env
APPL_TOP environment file passes variables instantiated test:
File = /ahcapps/oracle/ahcprod/apps/apps_st/appl/ahcprod_ahcprod.env
ADOVARS environment file passes variables instantiated test:
File = /ahcapps/oracle/ahcprod/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes variables instantiated test:
File = /ahcapps/oracle/ahcprod/apps/apps_st/appl/admin/adconfig.txt
HTTP
-----
check the URL = http://ahcprod.ahcl.com.sa:8000
RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.
Help page
----------
check the URL = http://ahcprod.ahcl.com.sa:8000/OA_HTML/help
RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.
Virtual directory
Virtual directory
------------------
RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.
JSP
----
check the URL = http://ahcprod.ahcl.com.sa:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.
Login page
-----------
RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.
---------------------------------------------
* Also find some of the errors found in the db level
Contents of the ApplyDatabase log file
----------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
Search hit BOTTOM, continuing to TOP
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ahcdb.ahcl.com.sa)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ahcprod)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE is not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ahcdb.ahcl.com.sa)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ahcprod.ahcl.com.sa)))
Exception occurred: java.sql.SQLException: listener refused the connection with the following error:
ORA-12514, TNS:listener is not currently of service requested in connect descriptor
Used by the client connect descriptor was:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ahcdb.ahcl.com.sa) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = ahcprod.ahcl.com.sa)))
Connection could not be obtained; return null
Database utility - ADX finished-
DEBUG: checkDBConnection out()
/stage/StageR12/startCD/Disk1/rapidwiz/data/stage/addbhomtgt.XML is missing
Check that adcrdbclone.sql
/ Error
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ahcdb.ahcl.com.sa)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ahcprod)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE is not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ahcdb.ahcl.com.sa)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ahcprod.ahcl.com.sa)))
Exception occurred: java.sql.SQLException: listener refused the connection with the following error:
ORA-12514, TNS:listener is not currently of service requested in connect descriptor
Used by the client connect descriptor was:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ahcdb.ahcl.com.sa) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = ahcprod.ahcl.com.sa)))
Connection could not be obtained; return null
--------------------------------------------------------------------
Make the contents of the log file
genclntsh running...
(/ usr/bin/LD: warning: i386:x 86-64 architecture of input file ' / ahcprod/oracle/ahcprod/db/tech_st/11.1.0/lib32/libxml11.a(ltxvm.o)' is not compatible with the release of i386
(/ usr/bin/LD: warning: i386:x 86-64 architecture of input file ' / ahcprod/oracle/ahcprod/db/tech_st/11.1.0/lib32/libxml11.a(ltxvm1.o)' is not compatible with the release of i386
(/ usr/bin/LD: warning: i386:x 86-64 architecture of input file ' / ahcprod/oracle/ahcprod/db/tech_st/11.1.0/lib32/libxml11.a(ltxvm2.o)' is not compatible with the release of i386
(/ usr/bin/LD: warning: i386:x 86-64 architecture of input file ' / ahcprod/oracle/ahcprod/db/tech_st/11.1.0/lib32/libxml11.a(ltxvm3.o)' is not compatible with the release of i386
(/ usr/bin/LD: warning: i386:x 86-64 architecture of input file ' / ahcprod/oracle/ahcprod/db/tech_st/11.1.0/lib32/libxml11.a(ltxvm4.o)' is not compatible with the release of i386
(/ usr/bin/LD: warning: i386:x 86-64 architecture of input file ' / ahcprod/oracle/ahcprod/db/tech_st/11.1.0/lib32/libxml11.a(ltxvm5.o)' is not compatible with the release of i386
/ usr/bin/LD:
------------------------------------------------------------------
* Please explain the problem and help to successfully carry out the installation...
Thank you
AligHello
For this I need to run adpreclone on Node2 and run adcfgclone on Node1
Please mention how to disable conc. Proc. on Node2 and turn on Node1You can either run postclone on both nodes and choose to have the CM running on Node2 or set "s_isConc" in the context file of application on the node2 not and 's_concstatus' to disabled and then run the AutoConfig (after purge table FND_NODES) - see (Note: 73611.1 - how to move the process server simultaneously from one node to another node) for more details.
One more thing...
I get this message in the internal Manager view details
Why this message occurs frequently, in one day, he came to 50 times
---------------------------Could not contact Service Manager FNDSM_AHCDB_PROD. The TNS alias could not be located, the listening on AHCDB process could not be contacted or the listener cannot generate Service Manager process
See the documents/suggestions in this thread.
After clone: could not contact Service Manager
Re: after clone: could not contact Service ManagerKind regards
Hussein -
I have my cluster of 2 nodes running without any problem.
I do the rapidwiz for applications and then when it got to the point where say you, it's what you want put on some RAC nodes, when I clicked on the button
It gave me an error about how it has not found the RAC nodes in an .xml file.
Is it because you have to have the infrastructure installed grid and back up and running for applications to be able to search the RAC nodes?
Also, do I need to configure the grid Infrastructure on the node applications in some way?
I found several guides on how to do it, but I'm running into some different questions.
Thank you
Lady Allora.
Hello
Yes, you need to have PAP/GRID services i.e., CRS, CSS etc. must be running.
When you select CARS as installation on screen rapidwiz, it prompts you for the nodes on which RAC services are running.
If you have 2 node RAC, it will list the 2 nodes and you will need to select them for your installation.
It is not that I know of any special configuration required.
Kind regards
Hugues
-
When I opened recently to manage Applications on my phone, I have a list of installed applications or running applications. This is display by default, no filter.
They that all seem to be able to uninstall. Most of them are apps I downloaded or familiar.
However, there are the following applications, which seem important, but have the option to uninstall. '
- com Motorola.Blur.contacts.ActiveSync
- com Motorola.Blur.contacts.Provider
- com Motorola.Blur.Home.Setup
- com Motorola.Blur.Messaging.QuickMessage
- com Motorola.Search
and then there is
- com Android.Providers.carriernameprovider
- com Android.Providers.im
Can someone tell me what they are and if I uninstall? I'm trying to understand where the source of my problems with my list of Contacts and the synchronization, and then I'm done in the Department of management applications. But I won't have to uninstall anything that seems important... like... com.motorola.ANYTHING or com.android.ANYTHING... until someone can help me here...
Like, if I click on say, com.motorola.blur.contacts.activesync, it displays a screen that displays 0.00 for total, application and data. And it can be uninstalled. This is same soft been reversed or used?
Now that I have data factory reset my phone, I checked on the Application Manager. This time in the list, it's purely programs and applications that I downloaded and installed on my phone. There are NO names to strings or whatever it is starting with "com" at all! No 'com.motoblur.' apps, nothing. Each application is a full name and has an icon for him.
Strange! Who must have indicated that something was buggy with the installation and which may explain why my phone was so slow and ridiculous. It should certainly be reset and formatted.
Once again, a factory reset saved the day. Now I install the minimum amount of applications. It work well, no break, shifts or problems. Very happy with it!
I guess that the answer to this problem is: these applications are fragmented pieces of the system and should not be displayed. This indicates a problematic installation of the o/s and reinstall the o/s or do a factory reset on the phone should solve the problem and eliminate those apps to appear.
-
OK... the first thing is that I installed a game... works very well.
I then tried to open one of my friends mods... nothing happened. He said he had to be reinstalled... so after many hours, I found a way to do it. but it usually always open. I now get a message saying that it must be installed in the application directory.
I need assistance in detail please... not very good with this stuff I don't want to spoil it im.
-What game?
«' ' ' Exact error message?»» "»
-Is Windows 7 ccompatible?Directory of the app in this case (similar) would be the "system32" directory that houses all of the .dll files.
System32 = C:\Windows\system32
You can just download the files "binkw32.dll" from a site (absolutely), you trust and drop it into the system32 folder.
Note that downloading the files .dll from other sites has its own drawbacks.
Or reinstall the game. Install as "admin" - right click on the installer and choose 'run as administrator '.
If the game is not compatible Windows 7, try to install in compatibility mode XP/Vista:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
MRI!
-
create the directory database object to access the application node files?
Dear all,
We have oracle E - Business Suite application and database in two different nodes.
I tried to read a file from the application server with utl_file, but I can read from directories in the database servers.
It seems that the purpose of database directory that I created to go to utl_file.fopen can be used for database server directories.
Is there a way I can read directly application server?
Concerning
BhatiaBhatia,
I was referring to the physical directory itself, do it on a disk that is shared between the two servers.
Thank you
Hussein -
Should what weight I enter in the application of fitness if I'm pregnant?
I am 30 weeks pregnant and while I usually weight 125 lbs, at present I weight 160 lbs. I don't know how much weight I should get into the application of fitness to get the most accurate data on calories. My situation is certainly not the same thing as someone who weighs 160 lbs without being pregnant, but my body is also not as it was 30 weeks ago.
Thanks for the help!
Hello
On the basis that any type of activity currently involves your body to burn calories to move your current weight from one place to another, you can enter your current weight.
-
What is my folder of the application that is supposed to look like?
Im not sure of what was originally in my app folder. I would delete that I don't have here in it. Can someone help me?
like the games in Trion who is supposed to be here?
What is SyphonInject?
What is log files?
Help, please!
The three programs that you named are not the default applications, you can get rid of them, if you do not want them.
This page lists all the default applications included with the Mavericks, so you can reference to see what you don't need.
-
What is a version of the application validates / build ID?
I am trying to package an application blackberry with cordova. The default version in the config.xml file is "0.0.1". Packing with the help of that version works fine. However, we strive to include the number of our internal system of versioning as the revision number, so I changed the version in the file config.xml for "1.1.0300060." When I do that, I get the following error:
[ERROR] Error: Please enter a valid application version
I then tried to pass on the command line with the parameter - buildId, who throws another (although probably the same root cause) error:
[ERROR] Not a version identifier is valid: 1.1.0300060
[ERROR] Native package exception occurred
Can anyone explain it please to me is what a BB version number valid and what are my restrictions and limits? Thank you.
The accepted format is X.X.X or X.X.X.X as shown here:
https://developer.BlackBerry.com/HTML5/documentation/beta/widget_element.htmlEach component of X (with the exception of the last one; that is the Build ID) can be between 0 and 999.
The ID to build, being the last X component in each example, must be between 0 and 32767. You can read about the meaning of this value here:
http://en.Wikipedia.org/wiki/Integer _ (computer_science)Each component must also be a valid number; cannot start with 0.
EDIT: Therefore, the largest possible version with which you can build is:
999.999.999.32767
-
Hello
After running $AD_TOP/bin/admkappsutil.pl on node MT I m get an appsutil instead of "appsutil.zip" file, which I suppose to place in DB $ORACLE_HOME.
Please help me out of this.
Thank you
Prabhat.
Details of the message of pl of the EBS and OS versions. This never worked correctly before? PL see if Doc 1382600.1 MOS is relevant
HTH
Srini -
What do you do when the application does not work and app builders email address is invalid?
I downloaded an app, after hearing it on the radio I thought it was an amazing idea, come to find out it doesn't work. I went to the app, went to their site, it would not allow me to register and the email address they provide is an invalid address! Is it possible to stop this company to make money from a product that does not work? The app is the music + storm edge Apps LLC
https://iTunes.Apple.com/kN/app/the-music+/id713689980?Mt=8 has a link to their Knowledge Base support > http://support.stormedgeapps.com/support/home
https://stormedgeapps.com/ has a link of support as well which leads to the same place
I can't find "support email address.
-
I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What to do
Install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe
Use it to install your lr.
-
Configure the application server after you change the database
Dear all,
We use ORACLE EBS R.12.1.2. Database: 11.1.0.7. 2 RedHat linux servers.
We are validating failover scenarios keep oracle database data.
Scenarios is that; We fail on the primary database and primary database role has opted for sleep.
Should what changes we make on the Application Server?
Should we change configuration of application server to connect to the new database (name, address of db server... etc). and how?
Thanks in advance,
Shareef
PL see Section 6 in MOS Doc 1545920.1
Maybe you are looking for
-
How to get Amazon search suggestions? When I search on Amazon, this isn't me suggestions
Hello I think that he stopped doing this before, but when I went to Amazon, I typed in the search bar on its Web site, offer suggestions. I just updated my FireFox and it doesn't, but I think he stopped doing so, there a little bit, not too long mayb
-
Satellite R830 - reset password
Hello I have a Satellite R830. As I closed it down an opinion seems to say keep until finished updates. At the end of the updates, the laptop closed and then restarted. PASSWORD of the screen when it is restarted on a black background: _ appears with
-
I didn't know where to post this put this on the forums, but it seemed like it should be. Bascially I have problems with the warranty I bought. On the site it says that my warranty has expired.I have a problem with my laptop and cannot get it fixed
-
Canon Rebel XS - does not work in AI Focus or ONE SHOT mode
Hello My camera was working fine until now, and all of a sudden she decided to not work. I have 2 lenses with me, the standard 18-55 and another 75-300. On the 18-55, when I try to take photos in AF mode, it will keep the flicker of the flash but wil
-
Log name: System Source: Service Control Manager Date: 17/07/2011-21:12:53 Event ID: 7000 Task category: no Level: error Keywords: Classic User: n/a Computer: ivan-PC Description: The BCM42RLY service failed to start due to the following error: The s