What is IOS

Similar Questions

• What required IOS for VPN

  Hello

  I have 12.2 (31) of Cisco IOS with my Cisco 2610 router. Is it possible to create the VPN tunnel with this platform. ?

  I'm looking for a communication secured with encryption as well. Is it possible, if not IOS will be required for the same...

  Thanks in advance...

  Dhaval

  Hi Alain,

  you need c2600-itpk9-mz image on your router

  iOS: 12.2 (23) SW

• Problem with iOS 9.3.1

  I recently updated and installed 9.3.1 iOS on my iphone 5s! To do this, what does iOS 9.3, it blocks my apps and stops a few applications to work correctly! Apple to resolve these problems and to send another update

  Restoring your iPhone.

  Restore your device from an iCloud or iTunes backup - Apple Support

  A possible cause is that you are using iPhone storage may be too.  Check the settings > general > storage & use iCloud > manage storage (under storage) and make sure that you have a minimum of 10% of the total free storage of the unit.

• Cisco IOS - failed login Admin

  Hello

  I configured Cisco IOS to authenticate via a server RADIUS (Cisco's ISE). By mistakely I put all authentication via RADIUS only.

  Now, I can not connect via RADIUS but unable to connect through credetials local Admin of Cisco IOS and for this reason I am not able to access the privileged commands.

  Is there a way back so this connection by admin (SMAP) would be possible and not on the SHELF?

  I do not have access to 'configure', 'enable the RADIUS user commands '.

  That worked before? BTW, what code IOS are you running?

  What error you see on the IOS command line interface when ISE is DOWN and you're trying to connect with the local user account?

  Do you have local authentication as a method of failover? You have paper before IOS config you locked?

  You can check that the ISE live authentication records if the user is authenticated by the radius server. Can you use the RADIUS credentials, go to LSE > operations > authentication > records messages.

  Did you write the changes? If this is not the case, the last resort would be to RELOAD.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• CISCO IOS

  Hello!!!

  I have question for CISCO IOS.  How will I know? What CISCO IOS support SSH version 1 $2? and it is possible to update CISCO IOS Cisco 7200 routers series for supporting SSH

  In General, you know quickly if a version of the IOS support SSH if the name of the image has K9.

  Example: c1700-adventerprise -k9 -12.4.bin

  Otherwise, you can use Cisco IOS Feature Navigator and check taken IOS supported by name of the image featured.

• Horrible Jitttering on iOS devices

  I created a simple version of my site using the format of the iPhone to muse. A page that scrolls. There are only one or two effects of small movements on the page. When you view this on the iPhone or iPad stuttering and nervous is terrible. The page will be same popping up when you start getting close to the bottom. When you scroll, while sometimes it is good, it will actually "buzz" and jump. Really unusable. I went into a Verizon store and had a guy with a phone test site for Android. He was handsome scroll. I downloaded Chrome on my phone and the trac is still there. I did another Muse site which has more scrolling effects, but nothing extraordinary. It works fine on Mac. View the site on an iPad or iPhone gives you the same jitters. It was not built in Muse in the format of the iPad, it's just the original site size viewed in Safari on iPad. It's frustrating. The site is very similar to the computer, but totally collapses on the iOS device. What is going on?

  www.imagimedia.com

  Thank you.

  Laughing out loud. There is no Flash involved with anything whatsoever out of Muse (unless you place/import a .swf file).

  It would be useful to obtain a copy of your .muse file, so we can simplify the page down to what is needed to reproduce the jig, jump to the top and any other weird behavior, so we can write bugs into the system from Apple for Safari and study workarounds until Apple fixes the problems. We will also need to know the version of the iOS you use and what specific iOS device.

  I see on my iPhone with iOS 8.1.2 6 jumping to the top (sometimes), but the jitter is almost imperceptible. I expect that the Jig is perhaps more obvious on a slower device or an older version of iOS.

  It would be interesting to try to move the clip with effects of scrolling to its own layer above all. Create a new layer, layer '2', and he move there. Who will know the browser should not plan for other things moving above it and who can push Safari to optimize the drawing to avoid jitter.

  Please send us the .muse file at [email protected] as well as a link to this topic. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.) Thank you.

• Recently burned CD copies on iPhone from iTunes

  Hello

  I just burned a few CD via iTunes. The import seems to have worked OK but iTunes won't copy on the iPhone. I tried manually - when I drag the files from the iTunes library that nothing happens. If I try to sync, the program blocks (step 3 of 3). If I try to 'add device' to right click on the song (s), the program blocks (step 3 of 3)

  • iTunes knows that my phone is mounted
  • I tried to reinstall iTunes
  • I am connected via USB
  • Are the new CD Library and iTunes can see, read etc.
  • I restarted the PC
  • I have an iPhone 5
  • I am on iOS 7

  I've never had this problem before and I can't just think about anything to cure it. Hayelp!

  Axel Crow wrote:

  Hello

  I just burned a few CD via iTunes. The import seems to have worked OK but iTunes won't copy on the iPhone. I tried manually - when I drag the files from the iTunes library that nothing happens. If I try to sync, the program blocks (step 3 of 3). If I try to 'add device' to right click on the song (s), the program blocks (step 3 of 3)

  • I am on iOS 7

  If you're really on iOS 7, this is probably the issue.

  While I can't find a particular requirement, it wouldn't surprise me to find that iTunes 12 does not play well with what until iOS 9.

• IPad - problem of AVI file

  I recently bought a camera of the fauna which records AVI video files. Once converted, the intelligent use of the Pro converter for - iPad.m4v files, I can play the files on my Mac desktop. However when I transfer the converted files (copied to an SD card using an Apple camera connection kit) on my iPad air he does not see them, and I'm unable to transfer them or read them on my iPad.

  Why play the files converted on my Mac BUT not on my iPad? Please, can someone advise if it is possible to overcome this problem.

  I understand that there is a problem of codec with iPad playback of AVI files, that's why they need to be converted BUT even when the files are converted, they do still have no game on the iPad...

  AVI is not a codec, it is a container, it can contain a wide range of codecs

  a codec means a der (co) / oder (dec), this is the true format of video and audio, or

  That's what support ios devices

  Video formats supported: H.264 video up to 1080 p, 60 fps, high profile 5.0 with AAC - LC audio up to 160 Kbps, 48 kHz, audio stereo formats .m4v, .mp4 and .mov; MPEG-4 video up to 2.5 Mbps, 640 x 480 pixels, 30 frames per second, basic profile with AAC - LC audio up to 160 Kbps per channel, 48 kHz audio stereo in the formats .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 x 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi format format

  You can use the free program handbrake to convert the media in other codecs to work with your ios device

  rather than relying on the somewhat limited use feature import connection cam then synchronize using iTunes to ios device

• 1252G AP TOWER to stand alone

  I am not able to downgrade the 1252G autonomous access point. First of all, I try with IOS image c1200-k9w7 - tar.123 - 7.JA5.tar

  I have rename-tar.default and download the IOS after the upgrade I'm gettting this error and AP has slain

  'Flash:/c1200-k9w7-mx.123-7.JA5/c1200-k9w7-mx.123-7.JA5' file, unzipped and installed, point of entry: 0 x 3000

  execution of...

  Please help me who to fix this and what another IOS should I try.

  Hey Wasim,

  You are on the right track here :) You will need a newer IOS 12.4 (10B) JA

  ;

  For the Cisco Aironet to Cisco IOS version JA5 12.3 Access Points (7)

  The system configuration required

  You can install JA5 Cisco IOS version 12.3 (7) on all 350, 1100, 1130AG, 1200, 1230AG and 1240AG access points.

  http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/b37ja5rn.html

  Notes of publication for Cisco Aironet Access Points and bridges for Cisco IOS version 12.4 (10B) JA

  The system configuration required

  You can install Cisco IOS release 12.4 (10B) JA on all 1130, 1240, 1250, 1300 series access points series outdoor access point/bridge and 1400 series

  http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/12_410b_JArn.html

  I hope this helps!

  Rob

• VPN solution

  Hello world.

  We plan to connect two locations via VPN with Internet access (each with their different ISP). Each branch has a router 3745 with a T5 IOS Version 12.2 (8). Does anyone know if it is possible to configure these routers to provide this solution?

  If so, does anyone know any document/text in Cisco' site that can guide us on how to set it up?

  Thanks in advance,

  Marcelle.

  do a show version to see what exact IOS version you are running, as well as the flash and RAM totals. It's certainly enough router to run a compatible version of IOS IPSec, but it might be possible that these units should not be enough ram and or flash for such IOS images.

  http://www.Cisco.com/en/us/customer/tech/tk583/TK372/technologies_configuration_example09186a0080194650.shtml

  is an IOS IOS config tunnel

• Client VPN router 1841 will not establish tunnel

  We have a 1841 with IOS 12.4 (3) we have been unable to establish a tunnel to using the 4.8.01.0300 version. It will not exchange keys ISAKMP whatever we use parameters. Debugging is a variety of errors including poorly matched to encryption, authentication, etc. It will not match even the default isakmp policy!

  Here are the relevant parts of the config

  No aaa new-model

  !

  resources policy

  crypto ISAKMP policy 10

  BA aes 256

  preshared authentication

  Group 2

  !

  crypto ISAKMP policy 100

  md5 hash

  preshared authentication

  Group 2

  !

  Configuration group Xclient crypto isakmp client

  test key

  pool vpnpool

  ACL 101

  !

  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac AES256-SHA

  !

  Crypto-map dynamic dyn_map 15

  game of transformation-AES256-SHA

  market arriere-route

  !

  !

  launch of the RA_map client configuration address card crypto

  client configuration address card crypto RA_map answer

  map RA_map 15-isakmp ipsec crypto dynamic dyn_map

  interface FastEthernet0/0

  Description "field.

  IP x.x.x.x 255.255.255.248

  IP access-group 150 to

  inspect the IP default100 in

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  card crypto RA_map

  And an example on Isakmp debug:

  * 21:53:47.903 Jun 28: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 14 against priority policy 100

  * 21:53:47.903 Jun 28: ISAKMP: DES-CBC encryption

  * 21:53:47.903 Jun 28: ISAKMP: MD5 hash

  * 21:53:47.903 Jun 28: ISAKMP: group by default 2

  * 21:53:47.903 Jun 28: ISAKMP: pre-shared key auth

  * 21:53:47.903 Jun 28: ISAKMP: type of life in seconds

  * 21:53:47.903 Jun 28: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  * 21:53:47.903 Jun 28: ISAKMP: (0:0:N / A:0): pre-shared authentication offered but does not match policy.

  * 21:53:47.903 Jun 28: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 0

  * 21:53:47.903 Jun 28: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 1 against priority policy 65535

  We cannot understand why the router will not match the pre-shared authentication setting, or any other parameter (encryption, hash etc.) we change.

  We tried to remove the NAT and ACLs nothing helps... What Miss me?

  Thanks

  There are various debug command? Crypto engine for debugging? Displays information about the cryptographic engine, for example what Cisco IOS software performs encryption or decryption operations. ? Debug crypto ipsec. For more information, see the following URL

  http://www.Cisco.com/en/us/products/ps6350/products_configuration_guide_chapter09186a0080455b04.html

• 1841 router VPN

  Hello

  I have a router from 1841 running C1841-ADVIPSERVICESK9-M 12.4 (12) worm, so capable, IOS VPN is not what forge IOS to run a VPN?

  Thank you

  This IOS supports IPSec VPN. What type of VPN actually looking for?

• Wie finde ich was dateien

  Wie finde ich was dateien

  Hi there nostart_of_photoshop5!

  Using Photoshop or a mobile application? What device and what OS/iOS?

  Thank you very much!

  -Kathleen

• How can I get the platform on which my application is running?

  I need to determine on what platform (iOS or Android), my application is currently running. Is there a way to do this? So far, I just found the Capabilities.os property, which is I think exactly this case. The problem with this property is that it only returns the different version of Windows, or if the platform is a Mac or Linux or an iPhone OS (this iOS? I don't know...).

  Are there ideas how I might solve this problem?

  Code I've seen online suggests that 'ios' is in the version, so it should work:

  If (Capabilities.version.indexOf ('IOS')< 0)="">

• What is the text on the lock below screen date, after upgrade to IOS 10?

  Hello

  I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

  What is - this and how can I remove it?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see

  Apple logo.

  It may take 30 seconds.

  See you soon

  Brian