What is is it possible to use the acl extended for split tunneling on ASA?

Similar Questions

• Is it possible to use the internal clock for meter tasks in the buffer?

  Hello

  Hardware: USB term mass 6251

  Software: LabView 2011 SP1

  I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

  I found two conflicting pages related to my problem:

  1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

  2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

  The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

  Comments/solutions?

  Javad

  Hi Javad,

  On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

  

  Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

  On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

  

  The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

  {10 MHz, 100 kHz} / {01:16}

  Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

  Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

  Best regards

• Is it possible to use the same password for two computers through quickbooks?

  We have two computers that are connected to each other through quickbooks and we must be able to get our e-mails from computers. Is this possible? We need to send invoices to the customers of a computer and the other is used for accounting and payroll.

  Original title: you can use the same password for two computers if they are already linked through quickbooks?

  Hi JayneB,

   

  (1) are you referring to the password of the user account?
  (2) who is the operating system installed on the computer?

   

  Method-

  I would like you to contact the Quickbooks support for assistance.

  Check out the link-

   

  QuickBooks support

   

  Hope this helps!

   

• Try to use the same pattern for more than two channels (CSR configuration) with usb 6000

  Hello

  I am currently trying to implement a LabView code to get readings of voltage using 5 different places at the same time. I want to only use the first location in the ground and get 4 measurements of voltage between the ground and each of the other 4 channels. I use a USB 6000 which, for now, allows me to use the same pattern for only two channels. Is it possible to use the same pattern for 4 channels?

  Thank you

  Maria

  The images do not explain everything. You must explain what are the sensors. I think you totally wrong on how they should be linked. CSR, all sensors must be a common understanding and the outputs not individual channels as I have already explained. If you are unable to do this, you should probably not use CSR and you have the wrong data acquisition device. If you want a side of a sensor as a reference, you need differential connections.

• Using the Serial Port for data acquisition Non-Serial

  I searched the forums and can't find anything on this topic.

  I saw that it was possible to use the parallel port for e/s digital single and I was hoping that the serial port can be configured the same. It seems all VI VISA only to use the serial port to receive ASCII characters at a given flow rate, but is it possible to simply query the status of the line series at my own speed to see if it is high or low, kind of like a single pin DAQ?

  It seems that it would be possible until the serial data are read and controlled by labview, not Windows. Let me know if you have ideas of how to approach this problem, or any comment as to why it is not possible.

  Thank you all!

  Select the property > settings series > Modem of the line parameters. For example, the State of the CTS is an entry to the pc.

  With the help of these lines is a very poor substitute for a scope or map DAQ. The only things you can return is Asserted, Unknown or Unasserted. The range of acceptable signals is important enough. Anything between + 3 and -3 is an unknown state. Your other signals is + / 3 to 15 volts. What type of signals do you really want to capture?

  Edit: there is no such thing as a visa so I have no idea of what you actually use.

• Is it possible to configure the same user for 500 systems that run under XP & Win7?

  Hello

  About 500 systems are run under Windows XP & Windows7, is it possible to use the same user for all 500 systems?

  Hi SupportRI,

  Windows Live family safety is no longer manages the accounts of children using Windows Live ID Windows Live ID on behalf of the child is essentially used for the feature of managing contacts (restrictions on the use of Hotmail and Messenger). Currently, parental control can manage Windows users; However, if you have already configured a Windows Live ID account before the update, it will be always available. You can see the thread below for more information.

  Where is the function of the safety Contact family management?

  If you intend to use Windows Live Family Safety for all users of 500 to restrict the Internet connection, please note that parental control does not restrict the Internet and Web sites. You also have the option in the list of content filtering Web to apply the rules to all users under the Family Safety.

  For more information on how you can install Windows Live Family Safety, please visit the link below.

  Protect your kids with parental controls

  Thank you!

• My wife and I have laptops and we want to combine the data both on a Mac. Including two Itunes accounts. This is possible by using the migration on each PC asst?

  In what concerns the transfer of data from a PC to a MAC, my wife and I have laptops and we want to combine the data both on a Mac. Including two Itunes accounts. This is possible by using the migration on each PC asst?

  You can bind the whole apple ID using family sharing. If you have trouble doing this, you can go to the apple store, and they would be happy to help you.

• Is it possible to use the Win XP on my Portege HDMI output?

  Is it possible to use the HDMI on Windows XP?
  How can I activate this option (if possible)?

  Thank you

  Hello

  Generally, it should be possible.
  I m an owner of the laptop with HDMI port and I m running Win XP too.
  I plugged in my external LCD via an HDMI cable and it works.

  What Portege do you have?

• is it possible to use the front panel without installing Labview?

  Hallo,

  I have two quick questions:

  1. is it possible to use the façade of a labview software without the need to install Labview itself? I mean something similar to the "power point viewer" that can display Power Point files without installing microsoft office.

  2. in a graphic intensity, how can you change the color?

  Thank you.

  Hello

  What you need to do is

  (1) turn off the interpolation color option

  2) click Add marker, which will add the marker where you want to add

  (3) then right click on the digital value for the marker, you created and you will see the tag, saying: "Color of the mark". Select the color you want.

  In one example, I created values 77 and 23 markers and their red and gray Cap. Hope this helps

  Concerning

• Is it possible to use the default value as sql expression in obiee 11g report?

  Hi all

  Is it possible to use the default value as sql expression in obiee 11g report?. Actually what I'm trying to make is that we send an ibot users. They want the same default values that are assigned in the command prompt in the report. So when we send the ibot it shows the report for default values assigned in the report criteria which is obsolute. As a solution, I kept the report in a dashboard page and send the dashboard like ibot page. But the problem here is that I can send only pdf format. Is it possible to do so at the level of the report (without using session variables). I want something like that

  Date between Date ' @{PV1} {Timestampadd (SQL_TSI_DAY,-90, CURRENT_DATE)} and Date ' @{PV2} {CURRENT_DATE}

  Thanks in advance

  Thank you

  AJ

  http://www.w3.org/2001/XMLSchema-instance"container ="http://www.w3.org/2001/XMLSchema"xmlVersion ="201201160' xmlns:sawx="com.siebel.analytics.web/expression/v1.1" > "

  "Question time '." Date '.

  "Question time '." Date '.

  BOX WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 1) THEN TIMESTAMPADD (SQL_TSI_DAY,-2, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 2) THEN TIMESTAMPADD (SQL_TSI_DAY,-3, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 3) THEN TIMESTAMPADD (SQL_TSI_DAY,-4, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 4) THEN TIMESTAMPADD (SQL_TSI_DAY-5 (, cast (max (CURRENT_DATE) date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 5) THEN TIMESTAMPADD (SQL_TSI_DAY,-6, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 6) THEN TIMESTAMPADD (SQL_TSI_DAY, 0, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 7) THEN TIMESTAMPADD (SQL_TSI_DAY-1, cast (max (CURRENT_DATE) date)) END

• Is it possible to use the Web ADF service proxy client in ADF mobile app

  Hello
  
  Recently, I started to develop mobile ADF applications on the device. Is it possible to use the client for proxy to service Web ADF with mobile application on the device? I read it in a document that, mobile ADF will not support "* WebService Java Proxy" * and supports only "* ADF webservice datacontrol * '"»
  
  If the customer service Web ADF proxy is not supported in mobile ADF, so how can I integrate ADF with EBS?
  
  REDA

  Where did you read that you can not use complex types with the Web Service data control? What version is that for.
  You should be able to use the Web Service data with complex types control.
  You can try and let us know if you encounter any specific problems?

• Is it possible to use the CONTRAST DETECTION as a method of applying mask/Matte?

  This could be one of these more stupid questions, but I would still put forward and I hope that I can get answers that can satisfy my curiosity.

  
  

  I came across this issue when I thought about how I can color-grade the subject independently without defining a range of color like the color of the skin, or peel the subject on the bottom and add something between the two without scope of roto. Then I thought of autofocus and it is possible to reverse the process of update automatic and really separate the proportions of the image are under discussion and which are out of focus. Usually I shoot with a narrow depth of field, and I think the BG would get a little blurry. So, it is possible to extract the areas of focus of the out-of-focus areas?

  
  

  So the process of detection of contrast or edge detection (or to phase detection) detection during an irreversible autofocus?

  Or require dynamic variations (to get different samples) to compare and evaluate values?

  Or is it limited process to perform in only a small area rather than an entire image and would take too much if applied to a large area processing power?

  Or is it just that all this is not mathematically this practice?

  
  

  Many thanks to those who could answer this question!

  
  

  Wish you a pleasant and creative day ~
  

  
  

  
  

  It is possible to use the channel information to extract a mast. This information comes from the color and luminance values. It's what we call a procedure cache. Usually you duplicate your layer of film and start applying color effects to isolate certain areas of color and luminance, and then you use this sequence as a cache of luminance to the layer below.

  Having said that, although it is fairly easy to find details of contours (actually find contours) it is extremely difficult to know which of these edges must be outside the desired area of masking. Trying to deconstruct the automatic update function, that a camera uses the image data would be quite a daunting task, and I don't know how effective is, it would be because there is currently no metadata binding to any part of the frame to something as the face of the person you want to use as a mask. Face detection algorithms can have a chance to do this for the faces, but other parts of the body would be extremely difficult to understand.

  Stereo may offer a solution to extract a procedure cache on the part of your shot which is development that took you great care, setting up correct convergence for couples of images, but it would not isolate skin tones.

  Rotobrush is an automated tool that requires user input to set inside the desired mask that uses the values of color and edge detection. It is very effective if you take care with photography original, but if you're not careful automatic roto using any tool becomes difficult if not impossible. Afterwards, the Visual effects are much more complicated if there is no production planning.

  Colorista II is my favorite tool for this kind of color correction. It is a very effective tool of internal mast that can do amazing things using the color range. Other color Correctors (Davinci, for example) have other tools to isolate areas based on the color and luminance values. Your idea is interesting, but it would be very difficult to remove using current tools EI.

• Is there a way to the target url by using the power of Attorney (I want to say is possible to use the proxy to target a site something like that.)?

  Is there a way to the target url by using the power of Attorney (I want to say is possible to use the proxy to target a site something like that.)?

  By default, you can not in Firefox.

  But you can use an add-on like FoxyProxy Standard, I think he understands the functionality you need.

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• Is it possible to use the current version of Safari on Windows 10?

  Is it possible to use the current version of Safari on Windows 10?

  N ° Safari has been developed and supported for Windows in 2012.  If you don't want to use Edge or IE, I recommend Firefox.