What is needed to connect to a Wi - Fi signal with a wired product?
We use Magic Jack Plus connected via an Ethernet CAT5 cable to our DSL router to our phone calls. We are heading a Condo with a Wi - Fi avialable in each unit. What product do we need to connect to that signal and will allow us to plug the Magic Jack Plus via Ethernet Cat5?
I think what you need is a wireless bridge. The wireless bridge can connect wireless to the WiFi signal in the Condo unit while you can wire your making Magic at one of its ports. You can check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=689d24b5a2024ca4bfea0bffadb30ceb_Getting_to_Know_L...
Tags: Linksys Routers
Similar Questions
-
what I need to connect my macbook to my iMac, so I can use the larger screen
what I need to connect my macbook to my iMac, so I can use the keyboard and the bigger screen
What MacBook and iMac what do you have?
Use your iMac as a display with the target - Apple Support Display Mode
-
6B55DX dv7: what cabling needed to connect the second HD
I would like to add a 2nd hard drive, but although there is an empty Bay, there is no wiring. My questions:
- What are the numbers of the part for the wiring needed?
- Are there other necessary parts such as clamps, cages, etc. ?
- Where can I get these parts?
- Is there anything else I need to know on the subject of bringing the HD after installation?
I intend using the extra drive for extra storage; I won't start him.
This is the cable you need:
http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=379
The dv7-6000 series was supposed to be supplied with the box hard drive, but no cable or screw. If you do not have the caddy (also called sled or cage) then you will need to find one of those too
You do this right. A hard drive in secondary Bay can be initiated, but makes a great place for additional storage capacity.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
What is the NI Switch Executive advantage? Nothing wrong with using this product?
Hello
We are looking in using the software OR go Exec to integrate with our switching matrix. This layer NOR seems to work well with TestStand and many apparent advantages. For our project, this includes not having to write several subsequences in: connect a DMM, read a DMM and tell DMM for hundreds of signals. It could do everything on one step of this exact, main - sequence? How to do that? We would like to know some of the disadvantages of this approach before we get too far down the road.
Thanks in advance!
Al
-
Satellite M45 - S169 PSM43U: need to connect to a serial & parallel
Hello!
I have an old model of Satellite and I need to connect to a machine that has the old fashioned entrences with pins (father and mother) and was told that I need a Replicator (series and parallel).
Now, I am very confused because I'm not technical, so please advise me on two things: is there something that makes such thing? (usb to old pines mode) and if there is I really need to buy it (so please pusrchase details).
I'm sorry I was so hard to describe what I need. I am an electronist and works with large machines so I need to connect my laptop to the machine; s software.
Thank you
Hmm. The notebooks of the era generation don t support the serial ports or parallel
This is why you don't have many opportunities to connect older devices to a laptop that was not equipped with the parallel or serial port.As far as I know, there are some USB-to-serial or USB port adapters / parallel.
Google a bit and I sure you can find some good offers m.
But note; I read somewhere that not all cards work properly, you will need to study a little.Good luck
-
On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?
It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.
Is this possible at all?
Thank you
Michel
Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.
1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:
Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014
2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian). The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:
3. I installed the linux drivers from NOR-RIO 15:
4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:
Example of API Interface FPGA C OR real time Linux and Eclipse
Michel
-
I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet. What happens on another laptop not this one.
Hello
· Which is exactly the problem that you face with iesh3.exe?
· When you receive the error message that is related to iesh3.exe?
· You did changes to the computer before the show?
· This issue you are facing with internet?
· What is the full error message that you receive?
Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Method 2: I would say as you put the computer to boot and check which application is causing the problem:
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Post back with the required information so that we can help you further.
-
Hey,.
I need the drivers that allow me to connect to the internet in Windows XP Professional.
Wired connection; Windows is not currently recognizing the modem, but he has done it before the reinstall.
I have not much information for you as I do the installation on one of the computers to work. If I get a general idea of what I need drivers that would be quite useful because I can pass my quarter fumble through them! Links to drivers would be super awesome!
Thank you very much!
Axel
I need the drivers that allow me to connect to the internet in Windows XP Professional.
Wired connection; Windows is not currently recognizing the modem, but he has done it before the reinstall.
I have not much information for you as I do the installation on one of the computers to work. If I get a general idea of what I need drivers that would be quite useful because I can pass my quarter fumble through them! Links to drivers would be super awesome!
Thank you very much!
Axel
The drivers you need are determined by the hardware you have. You need to know the brand and model in order to go to the manufacturer and download the drivers for this specific device.
Since then, you didn't give any material information...
-
Original title: router Question.
Hi all
not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.
Thanks :)
Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.
Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).
-
Qosmio G20-139: What cable I need to connect a 5.1 system speakers?
Hi all
Does anyone know which cable or connector, I need to connect my Qosmio g20-139 to a 5.1 system speakers?
I searched the forum and it seems that someone has used a "optical cable Toslink" - check link below:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3665
Anyone successful with this? Can someone please give me a link to a place I can buy something that works? (I put 'Toslink optical cable' in google and it gives like 1 million different things!)
Thanks for your help.
Chris
Hello Chris
I found a useful site on the required cables.
Check out this link.
http://www.mycableshop.com/2nd_Cat/Toslink.htmYou wondering where you can buy these cables. I put t know you came but I m sure that every good PC or reseller of audio accessories can sell you these cables.
-
Satellite M40-230: what cables are needed to connect to the TV
Hello
I went to PC World, where I bought my M40 and asked them for cables to connect to my TV using the s-video connection on the back of my laptop.
They said that this was not possible because S-video does not sound.
Does this mean that I have to get a separate cable for audio to use via the speaker/headphone jack?
Please let know us that it is a little confusing.
Thank you, George.
Hello
As far as I know it of possible to connect the laptop to the TV with an s-video cable.
The dealer is right, but there are different s-video cables.You can use one with s-video on one end Jack and taken 3 RCA (2 audio and 1 video) on the other end of the cable. Or you use a SCART instead of the 3 Sockets.
-
What cable should I connect Satellite C660 - 1 K 9 TV equipment?
Hey guys!
I basically just need to know what kind of cable I need to connect my laptop to my TV.
I have a laptop Toshiba Satellite C660 - 1 k 9 and my tv is make sure you Samsun.Thank you!
According to specification for laptop, your laptop has placed in the video output on the left side port port VGA 15 pins. Using this laptop port can send the video signal to external device. Please note that it is for the video signal only.
It is not the best option to connect to your laptop to the TV but there is no other choice. Check please if your TV is such port in the back.
If Yes, you need a VGA cable for the connection. -
What is the fastest connection that I can use for a new external SSD for my MBP late 2008?
That IS the question. I want a new external SSD for my MBP late 2008.
What is the fastest connection type that works?
'External' and 'SSD' could be a problem. SSDS are different animals of disks spinny. Some will say that you need not trim on SSD (TRIM is a management tool to move only the ' opportunity' bytes in a block when the block of data is moved), but definitely TRIM does not work on USB or Firewire. Not sure if the TRIM works on Thunderbolt connected readers as it does on disks SATA-path, however.
Speed included between slower and faster, however: USB 2.0, Firewire 400, Firewire 800, USB 3.0, love at first sight.
-
How can I sussesfuly fix me my computer
Hello brice,.
To see what updates are available for your computer, you will need to connect your computer to the Internet and look for the updates.
See using Windows Update in Windows Vista
See the updates Windows InstallerVisit our Microsoft answers feedback Forum and let us know what you think.
-
What is an FTP connection?
Something has gone wrong with my computer and I am not able to restore. I use my Manitoba as my homepage, but it can not connect now. It seems that http is ok but the FTP is not. Can anyone help? What is FTP, and where can I find?
Looks like you have a Trojan horse (not identified).
What you need to do is to identify it. When it has detected MSE, it says?Until I have more information, all I can say is that this page has tons of useful information:A good combination for you to use is:RkillMiniToolBoxTDSSKiller (or FixTDSS)MBAMOnce you have identified the malicious program, can help this site (which has tons of very specific withdrawal guides):In addition, if you can't find a solution here, their forums are top of the line:In addition to the MMFA (run the FREE version! If you are given the opportunity to install a trial version, DO NOT do it!), I recommend the SAS portable scanner:
Maybe you are looking for
-
Last night, I've updated my Macbook Pro in early 2011 at the El Capitan 10.11.5 Cougar (Yes, the leap). Open all apps to check out them, and Facetime.app and Messages.app are not open. FaceTime.app gives the message "an internal FaceTime error has oc
-
iPad iOS 3 9.21 freezes, slow, requires reset
freezing of the iPad, slow, requires very slow reset
-
Hello Let me start by saying that I am not sure this is the right forum for this question. If you know that the correct placement please let me know. I am a new user of LabVIEW (LabVIEW 10) and have already used the existing code for windtunnel det
-
Hello I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo). -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (er
-
The HP X 18 - 1180EW CPU and GPU upgrade.
Hello I would like to ask if it is possible to replace my stock CPU (P8600) and GPU (GT9600M)? What CPU is I consider T9600 but have no information on the graphics card is allowed. Best regards