What is the most reasonable way to install Win. 7 on 2 xp computers?

Similar Questions

• What is the easiest & fastest way to install Win XP on Satellite P200-14U

  This computer came today and was shipped with preinstalled Vista. I use XP Pro, so for now I install XP Pro. But I guess, that all drivers for graphics card, etc. etc is removed during the installation of XP.

  What is the easier and faster to install these drivers - going XP Pro do this automatically?

  Another thing is that I deleted (by mistake) the small partition that was to be used to reinstall the Vista installation. Is it possible to remind this partition (t.ex. with Partition magic), because the data are not erased (or is it?). Or maybe it will be totally erased when installing XP?

  Hello

  Yes, all drivers will be removed. You need to download the XP drivers for this machine on this site:

  http://209.167.114.38/support/download/ln_byModel.asp (Toshiba of Canada limited - drivers and downloads)

  No, XP will not install automatically, you will need to do. But you worry it s a piece of cake, Don t.

  Regarding your question of Vista: no s is not possible. Data are deleted because you deleted the partition table that describes where the data is located. Without it, all data is lost.
  I hope that I can help you

  Welcome them

• Query SQL with multiple tables - what is the most effective way?

  Hello I learn PL/SQL. I have a simple procedure, where I need to find the number of employees and departments by location according to location_id user input.
  
  I have 3 Tables:
  
  LOCATIONS
  Location_id (pk)
  location_name
  ...
  DEPARTMENTS
  department_id (pk)
  Location_id (fk)
  department_name
  ....
  EMPLOYEES
  employee_id (pk)
  department_id (fk)
  Employee_Name
  ....
  
  1 location can have 0 - SEVERAL departments
  1 employee has 1 Department
  
  Here's the query I come up with for PL/SQL procedure:
  
  / * Ecount, Dcount are variable NUMBERS * /.
  
  SELECT SUM (EmployeeCount), COUNT (DepartmentNumber)
  IN Ecount, Dcount
  Of
  (SELECT COUNT (employee_id) EmployeeCount, department_id DepartmentNumber
  Employees
  GROUP BY department_id
  HAVING department_id IN
  (SELECT department_id
  Ministries
  WHERE location_id = userInput));
  
  I get the correct result, but I wonder if my query is on the right track and if there is a more "efficient" method to do so.
  Thanks in advance for help a beginner.

  Hello

  Welcome to the forum!

  Something like this will be more effective:

  SELECT    COUNT (employee_id)               AS ECount
  ,       COUNT (DISTINCT department_id)     AS DCount
  FROM       employees
  WHERE       department_id IN (     SELECT     department_id
                      FROM      departments
                      WHERE      location_id = :userInput
                    )
  ;
  

  You should also try a join instead of the IN subquery.

  For efficiency, do only the things you need to do.
  For example, you need not a number of employees in each Department, in order to not calculate one. This means that you will not need the notice online, so do not have.
  You needn't PL/SQL for this work, so don't use PL/SQL, if you do not have to (I know this question was out of context, then you may have good reasons to do this in PL/SQL.)

  Perform all the filtering as soon as possible. Do not waste it effort on the things that will not be used.
  An example of this is: never use a HAVING clause when you can use a WHERE clause. What is the difference between a WHERE clause and a HAVING clause? The WHERE clause is applied until the aggregate functions are calculated and the HAVING clause is applied after; There is no other difference. Therefore, if the HAVING clause is not reference an aggregate function, it could be done in a WHERE clause instead.

• What is the most accurate way to tell how much hard drive storage you have left?

  My HARD drive is almost full and I have deleted hundreds of pictures and some movies, but the tab for storage underneath the watch more than a few GB available.  Is there a more precise way to tell?  It is a 500 GB drive MBP (mid-2012) running 10.10.5 with 8 GB of RAM...

  Launchpad - disk utility - it should give you an overview of what is placed on a macro level

  

• What is the most effective way to update tables when converting the RTF to FM 9.0?

  Hello once again, editors.

  My procedure:

  1. Word doc saved. Rich TEXT format and opened it in FM 9.0.
  2. Imported from all formats from an FM file,
  3. Used a third-party plugin or MIF to replace paragraph styles.
  4. Remove all the styles from Word of left-over of the FMP catalog.

  Problem: Doc contains dozens of tables, which came the format of unknown table 'Table' (in the table designer). In the MIF file I changed all instances of < 'Table' TblTag > to < TblTag "DefinitionsTable" > with good results - except that they are wide 6.5 "all and I need them to be the usual width for this format of table (5.75").

  Click Table > resize columns and the option button "by the scaling to the width for a total of 5.75" is already selected, so all that I have to do is he reapply by clicking on the button resize in this dialog box. The table snaps in the right size and position, everything is fine - except that I have to do this same procedure around 9 zillion times. So what I need is a faster way to do the same thing.

  Here is the table format in the MIF, but it represents only two columns (Num Num 1 and 0)-probably because this table is defined as having two columns. But the charts that I brought the RTF have three. And curiously, the values for TblColumnWidth for each of these two columns don't total still 5.75.

  < TblFormat
  < TblTag "DefinitionsTable" >
  < TblColumn
  < TblColumnNum 0 >
  < TblColumnWidth 1,22917 ">
  < TblColumnH
  < PgfTag "TableHeading" >
  > # end of TblColumnH
  < TblColumnBody
  < PgfTag "FieldName" >
  > # end of TblColumnBody
  < TblColumnF
  < PgfTag "TableHeading" >
  > # end of TblColumnF
  > # end of TblColumn
  < TblColumn
  < TblColumnNum 1 >
  < TblColumnWidth > 3,30209 "

  I have to do a presentation tomorrow, part concerns the conversion of Word in FM and it is a necessary component. I wish I had seen this problem a couple of days!  All expertise out there on this topic?

  Any suggestions gratefully received

  ~ ~ Gay

  Have you looked at TableCleaner of Rick Quatro, at http://www.frameexpert.com/plugins/tablecleaner/index.htm

  As you found, the problem with the MIF - Bop tables is that not all of the settings are stored in the instance of table, so it can be difficult to make sure that the settings you are looking at other areas are indeed affecting the table 'target' other places. Keeping the table identification numbers straight is the key

  MIFBrowser is an essential element (it works perfectly with FM9 MIF):

  MIFBrowser Wideman

• What is the most effective way to bring up the 1 of 4 images at any time?

  Thanks for reading this.  I have the same exact image need to attend different places in my program.  Right now, I created a movieclip with the image and I pasted in my step 4 different times and given to each instance a different instance name.  I would make a more effective program if I changed the location in the script of the video and has said the Stop program on a different image for each image, I need?

  What I'm trying to do, is to have a user to select from 4 different options and if they choose option 1, for example, the image of LED for option 1 light up and the other 3 lights will be off.  So, right now, if they choose option 1 I put ownership .visible to false for the other 3 images.  Is there a better way?

  The visible property control is very good.  If there is no need to show three of four, and they are identical in all cases, it may be better to simply have an and control its position.

• What is the most effective way to change a demo, training and evaluation of the recording mode?

  Often I want to record a software simulation in demonstration, training and evaluation, or at least in two modes.

  After registration, I have to make some changes, for example, I want to change "click field Contact must be completed" to "in the Contact field, click the fill button. So if I want to use videos as a demo, training and evaluation, I have to review even three times. Is there an easier way to do it?

  N ° you must edit each output separately.

• What is the most effective way to create an image without background?

  When I create, or use, the type or a logo or any graphic image, in a design, I want to import in InDesign with no background - 'transparent', if you want to.

  
  

  Measures on importation of PShop seem convoluted at best, with the bitmap, levels of grayscale and EPS files... I know I'm on the wrong track with this process, because it never seems to work.

  
  

  I would also like to, import from Illustrator and sometimes Painter12.

  
  

  Is there a mayonnaise "dirty way, or a better way to do this?"

  Thank you, the people of forum!

  Sticky means the setting should stay like this until you change, you need to may not display the options each time (but pay attention to the cultures - if you select a crop once option, saying that serving and file nex is not a defined bleed area, the import fails).

• What is the most effective way to run this sql

  I have a sql like this:

  select 
  ((select q_avg24 from view1 where years=2009 and qtr=1) - (select q_avg24 from view1 where years=2010 and qtr=1)) as sub_s1_avg24,
  ((select q_avg24 from view2 where years=2009 and qtr=1) - (select q_avg24 from view2 where years=2010 and qtr=1)) as sub_s2_avg24,
  ((select q_avg24 from view3 where years=2009 and qtr=1) - (select q_avg24 from view3 where years=2010 and qtr=1)) as sub_s3_avg24,
  ((select q_avg24 from view4 where years=2009 and qtr=1) - (select q_avg24 from view4 where years=2010 and qtr=1)) as sub_s4_avg24
  from dual

  As you can see, the sql calculate a field value to another view (View1 view2 View3, view4).
  It returns the difference between the 2 years.
  
  In this sql, you can see she will solicit the views of the 2 x 4 = 8 times to get result table.
  Each query sql (select statement) return a result within 5 seconds, then... for total = 8 X 5 = 40secs...
  
  40 dry is not so big problem... but in fact, I have at least 5 games queries (select statements) with other parameters are not an entry for the calculation of this query...
  There are a lot of your time in SQL that results from: (8X5secs) x 5 = 200secs...
  
  I would like to know is there a solution better if we face such problems?
  Thank you!!!

  You can use as... not tested...
  But if you provide additional information on the data, I think we can think best solution

  select sum(decode(id,1,decode(yers,2009,av,0),0))-sum(decode(id,1,decode(yers,2010,av,0),0)) av1,
         sum(decode(id,2,decode(yers,2009,av,0),0))-sum(decode(id,2,decode(yers,2010,av,0),0)) av2,
         sum(decode(id,3,decode(yers,2009,av,0),0))-sum(decode(id,3,decode(yers,2010,av,0),0)) av3,
         sum(decode(id,4,decode(yers,2009,av,0),0))-sum(decode(id,4,decode(yers,2010,av,0),0)) av4
  from(
    select 1 id,q_avg24 av,years
    from view1
    where years in (2009,2010)
    and qtr = 1
    union all
    select 2 id,q_avg24,years
    from view2
    where years in (2009,2010)
    and qtr = 1
    union all
    select 3 id,q_avg24,years
    from view3
    where years in (2009,2010)
    and qtr = 1
    union all
    select 4 id,q_avg24,years
    from view4
    where years in (2009,2010)
    and qtr = 1)
  

  Published by: JAC on March 30, 2012 13:31

• The most effective way to retrieve a number of virtual machines in an org?

  Hi all, what is the most effective way to retrieve a MV of County in an org. I am currently recovering all CDV in an org, then all the vApps, then all of the virtual machines and pushing them into a table, then do a vms.length on the table filled by all virtual machines.

  It takes a horrible time, and there MUST be a better way.

  Open to any suggestion. Thank you

  Good, as administrator of the organization then: (I have not tried as a normal user account)

  var vdcs = new Array();
  var orgVMCount = 0;
  var vcdHost = org.getHost();
  
  var queryService = vcdHost.getQueryService();
  var expression = new VclExpression(VclQueryOrgVdcField.ORGNAME, org.name, VclExpressionType.EQUALS);
  var filter = new VclFilter(expression);
  var params = new VclQueryParams();
  params.setFilter(filter);
  
  var resultSet = queryService.queryRecords(VclQueryRecordType.ORGVDC,params);
  while (resultSet != null) {
  
      var records = resultSet.getRecords(new VclQueryResultOrgVdcRecord);
      for each (var record in records) {
          var vdcVMCount = getVdcVMCount(record.href, vcdHost);
          System.log("VDC "+record.name+" VM Count: "+vdcVMCount);
      }
      orgVMCount += vdcVMCount;
      resultSet = resultSet.getNextPage();
  }
  System.log("Total Organization VM Count: "+ orgVMCount);
  
  function getVdcVMCount(vdcHref, host){
      var vmCount = 0;
  
      var qs = host.getQueryService();
      var exp = new VclExpression(VclQueryVMField.VDC, vdcHref, VclExpressionType.EQUALS);
      var exp2 = new VclExpression(VclQueryVMField.ISVAPPTEMPLATE, false, VclExpressionType.EQUALS);
      var exps = new Array(exp,exp2);
  
      var expFilter = new VclFilter(exps,VclFilterType.AND);
      var queryParams = new VclQueryParams();
      var vmArray = new Array();
      queryParams.setFilter(expFilter);
      var rs = qs.queryRecords(VclQueryRecordType.VM,queryParams);
      while (rs != null){
          var vmRecords = rs.getRecords(new VclQueryResultVMRecord);
          vmCount += vmRecords.length;
          rs = rs.getNextPage();
      }
      return vmCount;
  }
  

  It takes a little more code because the ".ORG" field is not available for the non-Admin queryVMField, but the. VDC IS, so we start by retrieving the TDC for the Org, then for each one, ask the number of vm for VDC.

  Post edited by: Burke - had accidentally initialization of orgVMCount as new Array(); -changed second line to 'var orgVMCount = 0;

• I have photoshop creative suite cs3 for PC. I want to make the transition to Mac products. What is the most simple/less expensive way to do it?

  I have photoshop creative suite cs3 for PC. I want to make the transition to Mac products. What is the most simple/less expensive way to do it?

  Your PC suite has no impact on it, as it is too late for upgrade prices. Simply purchase you a new subscription to creative cloud.

• What is the main reason for the use of SERIALLY_REUSABLE in your package?

  Hi Experts,

  What is the main reason for the use of SERIALLY_REUSABLE in your package?

  At first glance, the most popular reason seems that some developers forget to close cursors. Therefore, it is a good way to close automatically when your code is stopped during the same session.

  Second, if your business rules require that package variables still need to put the SERIALLY_REUSABLE default values is good for this.

  So, what's your reason?

  Thanks in advance.

  From http://docs.oracle.com/database/121/LNPLS/packages.htm#LNPLS99924:

  After the unit of work (call Server) a SERIALLY_REUSABLE complete package, Oracle database performs the following operations:

  • Closes all open cursors.
  • No free memory (for example, memory for collection and long VARCHAR2 variables)
  • Returns the instantiation of the package to the collection of reusable instantiations kept for this package.

  Explicit cursors in SERIALLY_REUSABLE packages:

  http://docs.Oracle.com/database/121/LNPLS/packages.htm#LNPLS99923

  I would not support using SERIALLY_REUSABLE instead of programming and the cursor's lifecycle management practices.

  > What is the main reason for the use of SERIALLY_REUSABLE in your package?

  If your package uses large amounts of memory in the State, especially in a multiuser environment heavy wherever the memory usage adds up and memory will not clean until the session is closed and the State is not held beyond the call to the package, then there's your use case.

• The most effective way to log data and read simultaneously (DAQmx, PDM) high data rates

  Hello
   
  I want to acquire the data of several Modules cDAQ using several chassis to
  high data rates (100 k samples per second if possible). Let's say the measurement time is 10 minutes and we got a large number of channels (40 for example). The measured data is written to a PDM file. I guess, the memory or the HARD disk speed is the limits. For the user, there must be a possibility to view the selection of channels in a graph during the measurement.

  My question: what is the best and most effective way to save and read data at the same time?

  First of all, I use an architecture of producer-consumer and I don't want to write and display the data in the same loop. I expect two possibilities:

  [1] to use the 'DAQmx configure logging.vi' with the operation 'journal and read' to write the data to a PDM file. To display the data in a second loop, I would create a DVR samples documented and 'sent' the DVR for the second loop, where the data will be displayed in a graph (data value reference). This method has the disadvantage that the data of all channels is copied into memory. Correct me if I'm wrong.

  [2] use 'DAQmx configure logging.vi', but only with the "journal" operation to write the data to a PDM file. To view the selected data, I had read a number of samples of the TDMS file in the second loop (I'm currently writing the TDMS file). In this case, I have only one copy data from the selected channels (not), but there will be more HARD drive accesses necessary.

  What is the most effective and efficient solution in this case?

  Are there ways to connect and read data with high frequencies of sampling?

  Thank you for your help.

  You say that the measurement time is 10 minutes. If you have 40 channels and you enjoy all CHs at 100 kHz, it is quite a number of values.

  In this case, I always try to approach under the conditions of use. If a measure is only 10 minutes, I just connect all PDM data and create a graphic module that could be in the same loop of consumers where connect you the data. You can always work on the raw data files big offline afterwards, the extraction of all the information you need (have a look at the product called NI DIAdem: http://www.ni.com/diadem/)

  The main issue is that the user needs to see in the graph (or perhaps a chart can be useful too). Lets say that the graph is 1024 pixels wide. It makes no sense to show multiple data to 1024 points, Yes? Every second will produce you 100 data points k per channel. What is the useful information, which should see your username? It depends on the application. In similar cases, I usually use some kind of data reduction method: I use a moving average (Point by point Mean.VI for example) with a size of the interval of 100. This way you get 100 data points of 1000 per channel every second. If you feed your graph every second with these average values, it will be able to data points in 1024 of the store (as a default) by channel (curve), which is a little more than 10 minutes, so that the user will see the entire measurement.

  So it depends on the frequency at which you send data to the consumer. For example, collect you values 1024 by iteration of the producer and send it to the consumer. Here you can make a normal means calc or a bearing (according to your needs) and he draw a graphic. This way your chart will display only the values of the last 10 seconds...

  Once I programmed some kind of module where I use a chart and not a graph, and the user can specify the interval of the absolute timestamp that is traced. If the data size is larger than the size of the chart in pixels, the module performs an average calculation in order to reduce the number of data points. Of course, if you need to see the raw data, you can specify an interval that is small. It all depends on how you program zoom functions, etc... In my case I hade a rate of 1 Hz, so I just kept all data in RAM limiting the berries to keep 24 hours of data, so that technicians could monitor the system. In your case, given the enormous amount of data, only a file read/write approach can work, if you really need access to all of the RAW data on the fly. But I hope that the values of working capital means will be enough?

• Satellite Pro P300 - what is the maximum RAM I can install?

  What is the maximum RAM you can install in the PSPCDA-01L00D Toshiba Satellite Pro P300?

  It is not listed in the specifications.

  Hello!

  It seems therefore that the laptop is already upgraded to the maximum RAM.

  I think that 4 GB of RAM should be sufficient for all applications on a laptop at the moment. :)

  Good bye

• What is the fastest processor I can install in Satellite A200-1YW?

  Hello!

  A question: what is the fastest processor I can install in this laptop? Current processor T5450 is.

  Thanks in advance for your help.

  Hello

  As far as I know the chipset is capable of managing the CPU

  Intel Core 2 Duo processor
  Intel Core Duo processor
  Processor Intel Pentium Dual Core
  Processor Intel Celeron M

  But as General, upgrading CPU is always a delicate procedure and it is possible that a higher temperature which is produced by a CPU stronger could affect the functionality of the laptop.

  Welcome them