What is the searchable property of name ID Spec?

Similar Questions

• What is the dynamic property used to retrieve the IP address of the CV?

  What is the dynamic property used to retrieve the IP address of the CV?

  If we get as below as we get VM kernel Port Group

  HostSystem - & gt; HostListSummary - & gt; managementServerIp

  But how do we get Service Console port group?

  Let me know thanks in advance.

  Hello

  Is your VC a harware installed or is installed in a virtual machine?

  If it is based on a material maybe you can retrieve it with

  ->->-> HostNetworkInfo HostNetworkSystem HostConfigManager HostSystem (or config)

  There is a portgroup HostPortGroup entity, but I'm a noob and never did.

  Maybe it helps.

  Christian

• What is the custom property that determine the Type of disc Provisoning?

  Hello

  I wonder what would be the custom property that determines the type of disk configuration during the construction of the virtual machine. I had noticed, VMS that are cloned with VM model with thin provisoning get the drive put in service end however if one adds the additional drive for the virtual machine of the vCAC, they get set up as 'Thick lazy disposition to zero' which I don't want but I wanted this type of control.

  I'm sure there should be value for the same property portfolio, but I am not able to find, someone used or?

  BR,

  MG

  VirtualMachine.Admin.ThinProvision = true / false

• What are the files with long names, the letters and numbers?

  I have several labels of large folders with names very long "ae61cbac70034e54059be539829a7e", that means these and I can delete them?

  Hello, TerriML,

  Performs a search of malicious programs.  Boot safe mode with networking

  Download the following tool and an analysis of the system.  I suggest also disable the system restore because the malware is known to hide in the restore points.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Turn off System Restore in Windows XP

  http://support.Microsoft.com/kb/310405

  Files such that you listed are known to the Windows operating system files - I advise until you know still don't not to tamper with them.

  Folder in which you made to locate these files in?  Is there an extension at the end of the file name?  Example: .dll, .sys, .ini

  What is e717295f-174-46de-ae61?

  e717295f-174-46de-ae61 truly is a process belonging to Microsoft Windows Operating System System. It is used by a lot of different software on your computer. Many programs, you are familiar with that run as stand-alone executables, such as e717295f-174-46de-ae61. However, most of the services are executed can operate independently. That of why, e717295f-174-46de-ae61 loads these files and runs himself. This is why you will often find several copies of an e717295f-174-46de-ae61 running on the Windows Task Manager.

• What creates the hex files (hexagonal names bracketed) who are accumulating in the appdata/local folder of the user?

  I'm running Windows 7 on a recently purchased HP PC (AIO-200-Quad).  I have only a username defined on this PC.  I have a printer installed, Windows Live Mail, IE8, and Office 2010 H & S and Norton Internet Security 2011.

  The appdata/local folder for this user keeps getting new hex file of names (long names containing Hex numbers and dashes, surrounded by curly brackets) created in it.  1 to 3 files are created each day since the aftermath of this PC has powered first.  All of these files are empty.  I could not it correlate directly to a specific activity that I still do, although there is some evidence that Norton looking for spam emails is one of the culprits.

  What applications or the OS functions create these folders?  Something is adjustable so they are deleted when they are no longer needed? (Disk cleanup does not remove them)  Are they safe to delete directly through Windows Explorer?

  I think you'll find that at least some of these records are created whenever the Windows Live installation done his version check twice a day. You can compare the time stamp on files with log files created in the same time to localappdata%\Microsoft\WLSetup\Logs %.

  The product team mean (PM) that records are supposed to be deleted when the installation is complete, and if they are not, it could be because the AV software has a lock on them. I do not believe that.

  As long as they are empty, they can safely be deleted.

• TouchSmart 600-1350: what is the REAL TouchSmart 600-1350 RAM Specs?

  I see HP screwed up once again, big surprise there!

  Specification of RAM TouchSmart 600-1350 (citing the HP site):

  200 pins, DDR3 SO-DIMM

  Since 200 pin SO-DIMM is really a standard DDR2 and DDR3 is a 204 standard pins, I chose best educated guess one that suits and matches at speeds and tensions with the computer of my client for the upgrade. We ordered 2 Kingston PC3-10600 off 4 GB Max computer modules, but guess what? It don't work!

  Given that HP can't even say DDR2 DDR3 standards, can someone at HP who really knows what is up please tell me the specifications of memory live CORRECT for this system? Perhaps eventually make corrections to specifications of systems page too. Beyond that, a refund of $40 to my disappointed customer would be too big, but I not holding my breath!

  Anyway, why did 2 4 GB Kingston 204 pin PC3-10600 modules work? Normal blood pressure, nothing special...?

  Hello:

  Based on my experience, any HP PC with an Intel series 5 using portable memory chipset... it must be VERY specific with what you get memory.

  Please read this post related about this submission, in my view, that you have to buy...

  While it is a laptop, he uses the memory of the laptop and has a chipset Intel 5 series like the one you are working on.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/memory-upgrade-6550b/m-p/5340551/highlight/true#M63185

• Property named 'name' is not found on the subject: VcVirtualMachine

  Hello

  I'm struggeling with a strange problem.

  I try to get all the VMS in vcenter (s) through sdk like this:

  var sdkConnections = VcPlugin.allSdkConnections;
  for (var i = 0; i < sdkConnections.length; i ++) {}
  var sdkConnection = sdkConnections [i];
  machines virtual var = sdkConnection.getAllVirtualMachines ();
  If (vms.length > 0) {}
  for (var j = 0; j < vms.length; j ++) {}
  var vm = vms [j];

  After that, I try to get the id and the name like this (e.g.) to write in the log example:

  System.log ("--> > > DEBUG - IE '" + vm.id + "'");

  System.log ("--> > > DEBUG-name '" + vm.name + "'");

  but DO NOT several id EXISTS in the vcenter BDD but coming back since the sdk?
  Te is a virtual machine with the id "id-47", which is not in the vpx_vm table
  but another with the id 'id-647' is in this table.
  When I try to get the name (vm.name) of the two I find myself in an exception with the message "property named 'name' is not found on the object: VcVirtualMachine.
  I tried to avoid this and to verify the existence of the property, but without success.
  How well to check the existence of the 'vm.name' without ending up in an error?
  (another question would be: why is the receiving of vm via the sdk which do not exist in vcenter?)
  Thank you!!!
  Chris

  Use try/catch...

  This will allow your code to continue treatment and simply log the errors rather than throw an exception.

  try{
  // your code here....
  }catch(err){
       System.log("Error: "+err);
  }
  

• Why is the "Called" property returns a name with *: Instance: 0?

  I'm building a VI that returns a list of all the side screws and their auxiliary screws, etc., a given top-level VI.  I first open a reference giving the path to the top-level VI, and then use the property 'Called' to get the subVIs. I then (in a loop) get all each Subvi conscripts by opening a reference using the name of the previous output called string. I noticed something when I ask for conscripts by the string name of XYZ.vi, that I get all its subvis, but I also have a XYZ.vi:Instance:0 name returned. What is the purpose of the proceeding: 0 and why is it happening? I like understand why Instance: x would never get added to the name, and also why VI would return his name in the property called? The VI is not defined as re-enterent or calling themselves dynamically or anything like that.

  Hope someone can explain that.

  Thank you

  James

  Hi ejb068,

  Hello and I hope that your well today.

  I continued to study your issue now I am back in the office, with my LabVIEW machine and resources OR. I concluded and also since found a confirmation of this issue.

  For a first level VI which has a few express screws on its block diagram, the names of the callee property currently includes a single instance of the upper level for each express VI VI.
  For example, if a VI has two ExpressVIs in the block diagram. The property called node will return two instances of the toplevel VI.

  First level VI = mainVI.vi

  Express VI = delay

  Result name called: mainVI:Instance0 (number lists according to the order screw Express are deleted from the diagram.)

  : first level VI name: InstanceX

  The problem is if you use VI server that this name is not valid - and causes a VI Server error. So I think it would be pretty safe filter these names.

  Please let me know what you think,

• Retrieve the Name of the tag property

  I'm definitely a novice PowerCLI. However, I have a script which is heavily borrowed from http://www.vstrong.info/2013/10/18/vmware-powercli-script-to-query-virtual-machine-events/
  

  What I would like to make in addition to the values that are retrieved, also receive the Name property of the attribute of the tag.

  The script I use now is:

  $vcenterserver = "myvcenter".

  # Check if VMware Snapin is loaded, otherwise, load

  If ((Get - PSSnapin - name VMware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null)

  {

  Add-PSSnapin VMware.VimAutomation.Core

  }

  SE connect-VIServer-Server $vcenterserver

  $CDT = get-Date

  Get-VM-name testvm | »

  Get-VIEvent-Types of information - start $CDT. AddDays(-30)-finishing $CDT | »

  Where {'}

  $_. GetType(). Name - eq "VmBeingDeployedEvent" "

  - or $_. GetType(). Name - eq "VmCreatedEvent" "

  - or $_. GetType(). Name - eq "VmRegisteredEvent"} | »

  Select the name of user, Createduserid, FullFormattedMessage, @{Name = "VM"; Expression = {$_.} Vm.Name}}, @{Name = "RC Code"; Expression = {$_.} Vm.Tag}}

  He retrieves the correct values with the exception of the tag for the virtual machine. I also tried @{Name = "RC Code"; Expression = {$_.} Vm.Tag.Name}}

  I can extract the value in a table using the following command, but can't seem to pull the Name property:

  Get-VM-name testvm | Get-TagAssignment-category RCCode | Select-Object - ExpandProperty tag

  Description of the categories of name

  ----                           --------                       -----------

  10031 technical RCCode except...

  Any help would be appreciated, thanks!

  OK, then try this. I have not yet tested, but it should do it for you:

  Select the name of user, Createduserid, FullFormattedMessage, @{Name = "VM"; Expression = {$_.} Vm.Name}}, @{Name = "RC Code"; Expression = {$vm = ($_.)} UMM name); Get-TagAssignment | where {$_.} Entity-like ("$VM")}}} | Export Csv c:\Temp\csv.csv - NoTypeInformation - UseCulture

  The issue was that as the expression of Code RC worked essentially a new request, the $_. UMM name was irrelevant for the entity. Instead I just had the previous $_. UMM name in a variable that is referenced in the cmdlet that followed. Let me know if it works for you.

• Contacts file is empty after the last OS update.  I have a backup, but what is the name of file

  I have a backup, but what is the name of the contacts file so that I can restore the backup?  After that the last operating system updated, the contacts file is empty.

  If you use Time Machine for backup, you can open the app on your Mac and then click the Time Machine icon in the menu bar and then click on "Enter Time Machine".

• Hello, y at - it a mobile version of email Thunderbird for iPhone 5 c? If so, what is the name of the application? Thanks in advance.

  I am a new user of Thunderbird and I would use it even on my small iPhone 5 c many found the app. What is the name of the correct application?

  There is no mobile version of Thunderbird.

• What is the name of the file where the contacts are stored.

  I need to restore my contacts from a backup. What is the name of the file where the contacts are stored?

  According to the contacts or the premises or in iCloud:

  ~/Library/application support/address book/metadata for local contacts

  ~/Library/application Suport/address book/Sources find the iCloud account and file metadata

  However, if your backup is located in Time Machine, open the contacts application and any asset, enter Time Machine. Go back in time to find contacts. Select them and click on restore.

• A40: What is the name of the memory?

  Hi I recently got a laptop sat pro a40.
  It shows 240 RAM and I want to add more memory to speed up the game of lineage 2. Question is what is the name of the memory, I need it please?
  love Kate xxx

  Hello

  You need a module of DDR memory like this:
  http://www.systemsassurance.co.UK/default.asp?shopID=systemsRelated.asp&PN=PA3313U-1M1G

  Good bye

• What is the "preferred printer name '?

  I bought a HP Officejet Pro 8610, and I am trying to add the printer to my Android phone.  He asks me for the 'preferred printer name', and I don't know what to put in there?  Can someone help me?  Thank you!

  probably just what the inicate expression, a name that you prefer, like "bubison" 8610 But how do you add the printer on the android phone? as a printer of cloudprint google?

• What is the name of the e-mail server on iCLOUD?

  What is the name of the e-mail server on iCLOUD?

  It was some time ago: p26 - imap.mail.me.com and outgoing e-mail p26 - smtp.mail.me.com

  but now I'm not sure about this, because I have problems to connect with the iCLOUD account in Outlook.

  Mail server information