Property named 'name' is not found on the subject: VcVirtualMachine

Hello

I'm struggeling with a strange problem.

I try to get all the VMS in vcenter (s) through sdk like this:

var sdkConnections = VcPlugin.allSdkConnections;
for (var i = 0; i < sdkConnections.length; i ++) {}
var sdkConnection = sdkConnections [i];
machines virtual var = sdkConnection.getAllVirtualMachines ();
If (vms.length > 0) {}
for (var j = 0; j < vms.length; j ++) {}
var vm = vms [j];

After that, I try to get the id and the name like this (e.g.) to write in the log example:

System.log ("--> > > DEBUG - IE '" + vm.id + "'");

System.log ("--> > > DEBUG-name '" + vm.name + "'");

but DO NOT several id EXISTS in the vcenter BDD but coming back since the sdk?
Te is a virtual machine with the id "id-47", which is not in the vpx_vm table
but another with the id 'id-647' is in this table.
When I try to get the name (vm.name) of the two I find myself in an exception with the message "property named 'name' is not found on the object: VcVirtualMachine.
I tried to avoid this and to verify the existence of the property, but without success.
How well to check the existence of the 'vm.name' without ending up in an error?
(another question would be: why is the receiving of vm via the sdk which do not exist in vcenter?)
Thank you!!!
Chris

Use try/catch...

This will allow your code to continue treatment and simply log the errors rather than throw an exception.

try{
// your code here....
}catch(err){
     System.log("Error: "+err);
}

Tags: VMware

Similar Questions

  • Object named 'record' is not found in the persistent store

    When I access portlet, I got the following error on side producer portlet:
    Could someone help what they indicate:

    Thank you
    Root cause of ServletException.
oracle.portlet.server.container.InvalidRegistrationException: oracle.portlet.server.containerimpl.ContainerObjectNotFoundException: Object named "registration" could not be found in the persistent store.
     at oracle.portlet.server.containerimpl.ConsumerRegistration.<init>(ConsumerRegistration.java:88)
     at oracle.portlet.server.containerimpl.ResourceServlet$ResourceRequestWrapper.<init>(ResourceServlet.java:138)
     at oracle.portlet.server.containerimpl.ResourceServlet.service(ResourceServlet.java:93)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.server.service.ContextFilter.doFilter(ContextFilter.java:101)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:230)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3593)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2203)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2109)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1427)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
oracle.portlet.server.containerimpl.ContainerObjectNotFoundException: Object named "registration" could not be found in the persistent store.
     at oracle.portlet.server.containerimpl.persistence.ConsumerPersistentStorage.get(ConsumerPersistentStorage.java:83)
     at oracle.portlet.server.containerimpl.ConsumerRegistration.<init>(ConsumerRegistration.java:69)
     at oracle.portlet.server.containerimpl.ResourceServlet$ResourceRequestWrapper.<init>(ResourceServlet.java:138)
     at oracle.portlet.server.containerimpl.ResourceServlet.service(ResourceServlet.java:93)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.server.service.ContextFilter.doFilter(ContextFilter.java:101)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:230)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3593)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2203)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2109)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1427)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    You try to migrate a portlet in JDev 10135 FOR PS1? If so, you can try to do the following:

    -Create a consumer with portlets of the server application embedded in 10.1.3.5
    -Open jdev PS1 and import the settings of the 10.1.3.5 system directory
    -Refresh record producer
    -Run the page again

    I hope this helps.

  • Get - VM: with "xyz" name VM is not found using the specified filters.

    Hello everyone!

    I have a script that reads a CSV with multiple host names, to connect to vCenter and should get the name of host, ip and PortGroup information to generate an external file of CSV.
    It happens that several cases vm does not exist in vCenter and returns me the below error:

    Get - vm: 04/07/2016-14:41:58Get - VMVM with the name "pxl1sso00008" was not found using the specified filters.

    No caractere:31 of C:\Users\f3135606\Desktop\vmTeste1.ps1:25

    + foreach ($vmName in $vmList) {get - vm $vmName |} Select Name, @{N = "Network"; e = {$_...}}

    +~~~~~~~~~~~~~~
    + CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)
    + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVM



    How would I do to get the information from an input file, see the vCenter and if this positive results write the file, ignoring errors. Ideally, if not to find the machine, simply create a line in the output file with only the hostname with the rest in white.

    Follow the .ps1 file:



    $vmlist = Get-Content C:\vmnames.csv

if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))
{
Add-PSSnapin VMware*
Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null  
[void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
if ($getVmwareSnapinErr.Count -gt 0) {    Add-PSSnapin VMware.VimAutomation.Core }
}
    
$VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
     
foreach ($vmName in $vmList) {get-vm $vmName| Select Name, @{N="Network"; e={ $_ | get-networkadapter|Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IP Address";E={@($_.guest.IPAddress[0])}}|Export-Csv –path c:\scripts\vlans.csv –NoTypeInformation}

    Laurent,

    See below... should get what you want... If the virtual machine is not found that it only allows to correct the virtual computer name in the output.

    $vmlist = Get-Content C:\vmnames.csv  

if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))  {
    Add-PSSnapin VMware*
    Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null
    [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
    if ($getVmwareSnapinErr.Count -gt 0) {
        Add-PSSnapin VMware.VimAutomation.Core
    }
}

$VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
$arrVMInfo = @()

foreach ($vmName in $vmList) {
    $vm = get-vm $vmName -ErrorAction SilentlyContinue -ErrorVariable VMError | Select Name, @{N="Network";E={ $_ | get-networkadapter | Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IPAddress";E={@($_.guest.IPAddress[0])}}
    if ($vm -eq $null) {
        $arrVMInfo += New-Object PSObject -Property @{ `
            Name=$vmName `
        }
    }
    else {
        $arrVMInfo += New-Object PSObject -Property @{ `
            "Name"=$vm.name; `
            "Network"=$vm.Network.Network; `
            "IP Address"=$vm.IPAddress `
        }
    }
}
$arrVMInfo | Select Name, Network, "IP Address" | Export-Csv "c:\scripts\vlans.csv" -NoTypeInformation

  • The following names are not found and cannot be added

    Hello

    I get this error "the following names are not found and cannot be added" when I tried to add newly created user for authorization of vCenter/group.

    I am using vCenter 4.1 with the guests of ESXi 4.1 & ESX4.1

    Time is synchronized with the ntp server in DC and vCenter & ESXi hosts.

    Any help to solve the problem?

    The problem caused by the AD domain and vcenter with the same sid, once change vcenter for a different sid, the problem has been resolved!

    How to change the SID on Windows 7 and Windows Server 2008 R2 using sysprep?

    http://www.Brajkovic.info/Windows-Server-2008/Windows-Server-2008-R2/how-to-change-SID-on-Windows-7-and-Windows-Server-2008-R2-using-Sysprep/

    You can download the PSGETSID

    Download tools named "PsGetSID" and make sure that your windows 2008 SID is not even. You can download it at the following ADDRESS:

    http://TechNet.Microsoft.com/en-us/Sysinternals/bb897417

    Thank you best regards &,.

    BSR Krishna

  • The name of the tag: "embed" not found in the currently active versions

    How can I remove the error message displayed in it Validation of Dreamweaver:

    The name of the tag: "embed" not found in the currently active versions. [HTML 4.0]

    Extraction of tag reads:

    < embed src = "about.swf" width = "615" height = "262" loop = "false" align = "absmiddle" bgcolor = "#FFFFFF" name = "about" allowscriptaccess = "sameDomain" allowfullscreen = "false" type = "application/x-shockwave-flash" pluginspage ="http://www.adobe.com/go/getflashplayer_fr" wmode = "transparent" quality = "high" >

    Use the modern techniques of the recess.  Here is a link to one of the newest...

    http://code.Google.com/p/SWFObject/

  • Class not found in the list of the specified assembly.

    Hi all

    I create a .dll ColdFusion object, but I get the following error message.

    "Class GenerateSQLReport not found in the list of the specified assembly. The assembly containing the class must be provided to the assembly attribute. »

    The process that I follow:

    -Updated the ColdFusion 9.0.1

    -Uninstall .NET integration Service

    -Install the .NET version 9.0.1 integration Service

    -Run the code.

    My Code is: ' < cfobject type = "dotnet" name = "MDBDTable" class = "GenerateSQLReport" (assembly="#expandPath('./GenerateSQLReportDLL.dll') #" > ".

    I got the following StackStrace:

    __________________________________________________________________________________________ ______________________________________________________________________________

    coldfusion.runtime.dotnet.Assembly$ DotNetClassNotFoundException: class GenerateSQLReport not found in the list of the specified assembly.

    at coldfusion.runtime.dotnet.Assembly.generateProxy(Assembly.java:272)

    at coldfusion.runtime.dotnet.Assembly.loadClass(Assembly.java:248)

    at coldfusion.runtime.dotnet.Assembly.loadClass(Assembly.java:223)

    at coldfusion.runtime.dotnet.DotNetProxyFactory.getProxy(DotNetProxyFactory.java:78)

    at coldfusion.runtime.ProxyFactory.getProxy(ProxyFactory.java:65)

    at coldfusion.runtime.CFPage.createObjectProxy(CFPage.java:4949)

    at coldfusion.tagext.lang.ObjectTag.doStartTag(ObjectTag.java:427)

    at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722)

    to cfDotNetDll2ecfm375138657.runPage(D:\Projects_Upendra\CodeForTesting\DotNetDll.cfm:2)

    at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231)

    at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416)

    at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)

    at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:363)

    at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)

    at coldfusion.filter.PathFilter.invoke(PathFilter.java:87)

    at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)

    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)

    at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)

    at coldfusion.filter.ClientScopePersistenceFilter.invoke (ClientScopePersistenceFilter.java:2 8)

    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)

    at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)

    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)

    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)

    at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)

    to coldfusion. CfmServlet.service (CfmServlet.java:200)

    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)

    at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)

    at coldfusion.monitor.event.MonitoringServletFilter.doFilter (MonitoringServletFilter.java:42)

    at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)

    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)

    at jrun.servlet.FilterChain.service(FilterChain.java:101)

    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)

    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)

    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)

    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)

    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)

    to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)

    to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)

    to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)

    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    __________________________________________________________________________________________ ___________________________

    Help, please.

    I'm not very sure of .NET. If I'm missing something please suggest.

    The CF code must include the full path to the class, including any namespace. When you create a c# project in Visual studio, it usually uses the name of the project as"namespace by default". So if your project is named "MyProject" the full path would be:

    Post edited by: == cfSearching == -.

  • error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

    I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

    These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

    • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
    • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    where the name of the Program Files folder may vary depending on the region.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    TT2

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

  • the 6848 ordinal is not found in the dynamic link library mfc90u.dll

    Hello

    (I hope) a brief history of my problem:

    I am running Windows 7 Professional (64 bit) on a VM (VirtualBox software) on my computer of Linux Mint.  I tried to run a program called Filemaker Pro Runtime, (name of original file FMPROR. EXE.  First of all, I get the error "the side to side configuration is incorrect" and after a few hours of internet browsing, checking the logs etc, I found that I had to install Visual C++ Runtime (x 86, 2008 version) that I found and installed.  Only concern was the page I have d/led (which was a Microsoft page) does not mention Win 7 system requirements - I have tried to find a version for Win7, but a search increase no relevant results.  So I installed the version I found, by Windows XP, Win Server and Vista (I think it may have been an old page).  This seemed to fix the side-by-side configuration error, but now I get the error:

    the 6848 ordinal is not found in the dynamic link library mfc90u.dll

    I tried a search on the web using the above string, but the closest results, mentioning only a .dll ordinal and various different seemed not really relevant.

    I would be very grateful if someone could help me find the required information fix it, score at least me to a Web page that will help me to understand.  I'm not a geek, but I'm pretty OK with research and implementation of aid on the web, but this time, I'm confused as to how to proceed.

    Thank you very much in advance for any help received

    See you soon

    Ricky Walker

    Hello

    Version of Windows 7

    http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

    MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=26368

    See if that helps.

  • IOS VPN: Key not found in the profile key, abandonment of exchange rings

    Can someone give me directions to solve a problem with config VPN L2L 2821-2821 please?

    The router's config only L2L.

    Router B has the VPN and L2L customer profiles.

    The part of VPN client works very well. The L2L gives the error on router B when the tunnel is started from router A:

    044234: 14:20:45.830 Dec 1: ISAKMP: (1572): former State = new State IKE_R_MM4 = IKE_R_MM5

    044235: decrease 1 14:20:45.830: ISAKMP: (1572): payload ID for treatment. Message ID = 0
    044236: 14:20:45.830 Dec 1: ISAKMP (1572): payload ID
    next payload: 8
    type: 1
    address: a.b.c.d
    Protocol: 17
    Port: 500
    Length: 12
    044237: decrease 1 14:20:45.834: ISAKMP: (0): counterpart is wup_l2l profile
    044238: 14:20:45.834 Dec 1: ISAKMP: (1572): key to the ADDRESS found in keyring wup_l2l_keyring
    044239: 14:20:45.834 Dec 1: ISAKMP: (1572): key not found in the profile key, abandonment of exchange rings
    044240: 14:20:45.834 Dec 1: ISAKMP (1572): action of WSF returned the error: 2
    044241: 14:20:45.834 Dec 1: ISAKMP: (1572): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    044242: 14:20:45.834 Dec 1: ISAKMP: (1572): former State = new State IKE_R_MM5 = IKE_R_MM5

    044243: 14:20:45.854 Dec 1: ISAKMP: (1572): peer does not paranoid KeepAlive.

    044244: 14:20:45.854 Dec 1: ISAKMP: (1572): remove the reason of HIS 'IKMP_ERR_NO_RETRANS' State (R) MM_KEY_EXCH (a.b.c.d peer)

    The configuration I used is comprehensive guide Cisco Press Cisco VPN (Richard Deal)

    I checked the keys on each side.

    I checked the configuration with other Cisco documents.

    I've added definitions of key host in addition to the main address definitions.

    As far as I can see the profiles match on each side.

    I'm at a loss to interpret the error he apparently found a key and then immediately, not found a key.

    I work on securing and extract the relevant parts of my configs for the display, but if someone has indications now it would be much appreciated.

    Thank you

    You can try to remove the host name pre-shared key from the Keyring key and test?

  • WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    Hi, we get this error in an independent ADR on Grizzly implemented.

    August 14, 2014 09:59:05

    oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or a table has not been found in the schema:

    APEX_LISTENER

    Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

    internalError

    GRAVE: JDBCException [kind = NO_DATA]

    JDBCException [kind = NO_DATA]

    defaults.xml "XXXXX" designate removed for safety, front of post

    <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

    < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

    Properties of <>

    < comment > saved on Mon Aug 04 16:25:09 EDT 2014 < / comment >

    < key "cache.caching entry" = > false < / entry >

    < key = "cache.directory entry" > / tmp/apex/cache < / entry >

    < key = "cache.duration entry" > days < / entry >

    < key = "enter cache.expiration" > 7 < / entry >

    < key = "enter cache.maxEntries" > 500 < / entry >

    < key = "enter cache.monitorInterval" 60 > < / entry >

    < key = "cache.procedureNameList" / entry >

    < key = "cache.type entry" > lru < / entry >

    < key = "db.hostname entry" > XXXXXXXXX < / entry >

    < key = "db.password entry" > XXXXXXXXXXX < / entry >

    < key = "db.port entry" > XXXX < / entry >

    < key "db.sid entry" = > XXXXXX < / entry >

    < key "debug.debugger entry" = > false < / entry >

    < key "debug.printDebugToScreen entry" = > false < / entry >

    < key "error.keepErrorMessages entry" = > true < / entry >

    < key = "enter error.maxEntries" > 50 < / entry >

    < enter key = "jdbc. DriverType"> thin < / entry >

    < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

    < enter key = "jdbc. InitialLimit' > 3 < / entry >

    < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

    < enter key = "jdbc. MaxLimit' 10 > < / entry >

    < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

    < enter key = "jdbc. MinLimit"> 1 < / entry >

    < key = "enter jdbc.statementTimeout" > 900 < / entry >

    < key "log.logging entry" = > false < / entry >

    < key = "enter log.maxEntries" > 50 < / entry >

    < key = "misc.compress" / entry >

    < key = "misc.defaultPage entry" > apex < / entry >

    < key "misc.enableOldFOP entry" = > true < / entry >

    < key "security.disableDefaultExclusionList entry" = > false < / entry >

    < key = "enter security.maxEntries" > 2000 < / entry >

    < / properties >

    Complete log

    August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

    INFO: NOTE:

    Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

    August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

    INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

    August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

    INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

    August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

    INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

    August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

    INFO: Using the configuration file: / u00/home/oracle/ords/ords

    Configuration properties for: apex

    cache. Caching = false

    cache. Directory = / tmp/apex/cache

    cache. Duration = Days

    cache.expiration = 7

    cache.maxEntries = 500

    cache.monitorInterval = 60

    cache.procedureNameList =

    cache.type = LRU

    DB. HostName = XXXXXXXXXXXXXXXXXXX

    DB. Password = *.

    DB.port = XXXXXXXXXXXXXXXXXXX

    DB.sid = XXXXXXXXXXXXXXXXXXX

    Debug.Debugger = false

    debug.printDebugToScreen = false

    error.keepErrorMessages = true

    error.maxEntries = 50

    JDBC. DriverType = thin

    JDBC. InactivityTimeout = 1800

    JDBC. InitialLimit = 3

    JDBC. MaxConnectionReuseCount = 1000

    JDBC. MaxLimit = 10

    JDBC. MaxStatementsLimit = 10

    JDBC. MinLimit = 1

    jdbc.statementTimeout = 900

    log. Logging = false

    log.maxEntries = 50

    Misc.Compress =

    misc.defaultPage = apex

    misc.enableOldFOP = true

    security.disableDefaultExclusionList = false

    security.maxEntries = 2000

    DB. UserName = APEX_PUBLIC_USER

    August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

    August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

    INFO: Oracle REMAINS initialized data Services

    Version of REST Data Services Oracle: 2.0.8.163.10.40

    The Oracle Data Services REST server info: Grizzly/1.9.49

    August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

    INFO: GRIZZLY0001: from Grizzly Framework 1.9.49 - 14/08/14 11:28

    August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

    INFO: http://localhost: 8080/ADR / began to.

    Configuration properties for: apex_al

    cache. Caching = false

    cache. Directory = / tmp/apex/cache

    cache. Duration = Days

    cache.expiration = 7

    cache.maxEntries = 500

    cache.monitorInterval = 60

    cache.procedureNameList =

    cache.type = LRU

    DB. HostName = XXXXXXXXXXXXXXXXXXX

    DB. Password = *.

    DB.port = XXXXXXXXXXXXXXXXXXX

    DB.sid = BXXXXXXXXXXXXXXXXXXX

    Debug.Debugger = false

    debug.printDebugToScreen = false

    error.keepErrorMessages = true

    error.maxEntries = 50

    JDBC. DriverType = thin

    JDBC. InactivityTimeout = 1800

    JDBC. InitialLimit = 3

    JDBC. MaxConnectionReuseCount = 1000

    JDBC. MaxLimit = 10

    JDBC. MaxStatementsLimit = 10

    JDBC. MinLimit = 1

    jdbc.statementTimeout = 900

    log. Logging = false

    log.maxEntries = 50

    Misc.Compress =

    misc.defaultPage = apex

    misc.enableOldFOP = true

    security.disableDefaultExclusionList = false

    security.maxEntries = 2000

    DB. UserName = APEX_LISTENER

    August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

    GRAVE: JDBCException [kind = NO_DATA]

    JDBCException [kind = NO_DATA]

    at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:63)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)

    at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:98)

    at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)

    at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)

    at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)

    at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)

    at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)

    at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)

    at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)

    at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

    to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

    to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

    at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)

    at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)

    at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

    at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)

    at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)

    at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)

    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)

    at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)

    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)

    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)

    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)

    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)

    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)

    at com.sun.grizzly.ContextTask.run(ContextTask.java:71)

    to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

    to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)

    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)

    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)

    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)

    at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)

    to com.sun.proxy. $Proxy44.executeQuery (unknown Source)

    at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:92)

    to oracle.dbtools.common.jdbc.JDBCResultRowIterator. < init > (JDBCResultRowIterator.java:29)

    at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:52)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:60)

    ... more than 33

    DBA has forgotten to run apex_rest_config.sql Doh!

  • Value is not found for the ory mandate VMHost parameter

    $vmhost = "host1".

    $vss = "vSwitch1.

    $pg_name = "VM_Network".

    New-VirtualSwitch-name $vss - VMHost $vmhost - Nic vmnic2

    I get this error message

    New-VirtualSwitch: 15/12/2014 23:53:44 new-value VirtualSwitch is not found for the term

    parameter ORY VMHost

    C:\Users\www\AppData\Local\Temp\Untitled5.ps1:11 char: 18

    + New-VirtualSwitch < < < <-name "VM_Network" - VMHost host1 - Nic vmnic2

    + CategoryInfo: NotSpecified: (:)) [new-VirtualSwitch], VimException)

    + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Ho

    St. NewVirtualSwitch

    PS C:\Users\www >

    any idea?

    Could be a problem in PSP +.

    You stop/start PSP + before running the code.

  • File &lt; unspecified file name &gt; was not found.

    Hello

    Running ESXi 5.0 Update 1.

    I have a 8 VM version which is one of our two domain controllers, (Windows Server 2008 R2). It's storage room.

    I use ghettoVCB to save the virtual computer to NAS and I was trying to resolve why this particular virtual machine was not copying.

    I had SSH into the server and, thinking that I was in a different directory, files deleted. I was actually in the folder for the domain controller virtual machine. Of course, he could not remove all the files as they were in use.

    I've recreated the hard descriptor file using this link.

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002511

    When I rebooted the VM, the domain controller was riding without a network connection. I went to the settings and set it to the correct network, but he would never record and referred to the 'file < unspecified file name > is not found' error message.

    I'm done manually by modifying the .vmx file and changing the field "ethernet0.networkName" to the correct network. The virtual machine started correctly with a working NIC and everything is OK.

    However, if I need to change the settings for the virtual machine, I always get the 'file < unspecified file name > is not found' error message.

    I thought I'd create a new virtual machine with the same settings and adding the hard file.

    1. I am not confident in the correct to follow on that, track and
    2. I'm not so, because it is a domain controller, there will be bad consequences. I read somewhere that the UUID or something will be different and there could be network problems.

    Can anyone provide some tips?

    Thank you

    Steve.

    I suggest the following.

    (1) close the source VM

    (2) create a new virtual machine, and then modify it to remove (delete), this is a virtual hard drive.

    (3) copy the folder source VM virtual disk in the target VM folder.  In the console or via SSH, you can use vmkfstools for this operation.

    (4) to change the VM and add a new hard drive by using the use existing file"' option.

    (5) game of the virtual NETWORK card on the new VM to be disconnected.  Just in case the new VM is a screw up, it won't impact on the other DC.

    (6) move the virtual machine online and see how it works.  If it's good then you just need to connect the virtual NETWORK adapter and it connects to the power on the value.

  • BEA-382051 any transaction not found on the OSB Proxy Service

    Hello

    I have a proxy mq service and that has properties enabled for 1. Mandatory transaction 2. Same operation required for a response. Also added routing with QoS Options to "Exactly Once" actions to publish and c/o Service.

    MQ proxyQ-> proxy1 local-> localPS11-> localPS12-> localPS13
    MQ proxyQ-> local proxy2-> localPS21-> localPS22-> localPS23

    All these PS11, 12,... have publish and service a/s for various DB operations such as readBS, insertBS and updateBS.

    I searched a few threads in the forum, Anuj has also suggested to activate Options routing with QoS to "Exactly Once".
    What I did is I added and allowed to c/o/Publishing Service requesting this property [insertPS-> insertBS] and [updatePS-> updateBS] only.
    * NOT for [readPS-> readBS] area.*

    What is the cause of this error? I mean, what do I need to enable to publish them all and s. c/o actions regardless of readPS or updatePS?
    I also tried with httpProxy instead of mqProxyService service

    Error: BEA-382051 any transaction not found on the current Thread

    Your suggestion is very apprecited.

    Thank you

    Edited by: 1002815 may 6, 2013 07:59

    Yes, no need to add this legend and node of Road Service by participating in the overall transaction by default.

    Kind regards
    Anuj

  • Error (10,47): EntryFlowPageCO not found in the oracle.apps.ap.oie.entry class.

    Hi all

    I extended a CO named IndusFinalReviewPageCOXX and I got the following error.

    Error (10,47): EntryFlowPageCO not found in the class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in the indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX class.


    I already drag the EntryFlowPageCO class file in the path myclasses\oracle\apps\ap\oie\entry\summary\webui
    and import the file. but the error remains the same... After that, I compile the EntryFlowPageCO class file and found a CO EntryFlowPageCO imports more. I drag the class of this CO also file in the appropriate path... But still the same error.

    Please give me the solution as soon as POSSIBLE.

    Thank you
    Amit Jaitly

    Amit,

    In the standard central, you can check this controller as entryflowpageco is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.

    Its under oracle/apps/ap/goose/entry/webui put the same under this directory structure.

    Kind regards
    GYAN

Maybe you are looking for

  • Looking for the older version of BIOS for my A-L50-1EH

    Hello I have a problem with the detection of my SSD in the Toshiba Satellite L50-A-1EH (PSKK6E).It gets only detected in BIOS 1 on 30 times at the start (after which it runs great).If 'the SATA Interface setting' patches 'Autonomy' the problem of det

  • Cannot start Windows XP Home edition

    If anyone can help me it would be much appreciated! My brother has problems with his laptop - I don't know what model exactly, but it was only bought last November and has not been used that - it's not only recently even had installed on internet!It

  • No recurring no audio output for Vista

    I own a HP Pavilion dv6000 Series notebook and have recently lost all my audio. Tuesday, I booted up my laptop, and the icon "No Audio output device" installed appeared. Device Manager showed no sound drivers anywhere, even when I checked for those h

  • Problem with windows mail. sending attachments.

    When I send an attachment (stored in a file. jpg) photo with Windows Mail (Windows Vista) the recipient cannot open the attachment... it says .eml file.  Can anyone help?   I send things resized smaller format, is not the size that problem, and it IS

  • BlackBerry Smartphones turn off email work on BB to the office where e-mail comes to my computer

    User "BOLD" of Blackberry - first week I love to get the email of my work on my BB when I'm away from the office or at a meeting, but when I'm in the office, is there a way I can stop the email to go to my BB? Thank you!