What knowledge modules to use

Similar Questions

• Satellite A30 - 151 - what memory module can use?

  Hello

  I have TOSHIBA Satellite A30-151 with 768 MB of DDR1 memory.
  I want to upgrade. What is the best memory that I can buy?

  the card says:
  Max 2 048 MB.

  So, how many slots I? I can buy 2 x 1 Go DDR1-333 memory? Can it be more than 333 then?

  Thank you
  NIR.

  Hello

  It is really an oldie
  As far as I know that you can upgrade the RAM up to 2 GB of RAM
  The bus (FSB) front-end speed seems to support 533 Mhz and that's why you should be able to use the 533 Mhz RAM modules.

  PS: The laptop must support 2 slots of memory if you are able to put 2 x 1 GB RAM

• What Ram modules are used in the Satellite Pro L870 18R

  HYA

  I m new to this forum so apologies if I posted in the wrong place.
  I just bought a Sat Pro L870 18R for my wife as a Christmas pressy.
  Before she gets to him I was going to increase the Ram of 4 GB to 8 GB.

  I know he has a single stick of ddr3 1600 Mhz in it, but without opening it you know which manufacturer to use Ram Tosh for this machine?

  I like to keep the same manufacturer.
  If I can at least give him a chance to run dual channel. I know I couldn't just take part and look like I m going to have to open it to adapt to the new ram anyway.

  I just i didn t want to keep o he packing and unpacking, and opening and closing upward are a gift after all lol.

  Any help appreciated thnk

  Above all the RAM brand is very important to get the RAM running in dual channel.
  It is important that the two RAM modules will support the same features.

  As far as I know the unit was equipped with a SO-DIMM 4 GB RAM DDR3 1600 module MHz (PC3-12800). I guess the reference is: * PA3918U-1M4G *.

  Welcome them

• Microsoft SQL Server to Essbase knowledge modules

  Hello
  
  I want to integrate an Essbase ASO cube data in a Microsoft SQL Server view.
  
  Should knowledge modules I use if my rest area is the Sunopsis Memory engine?
  And I need a load to import rule succeed?
  
  Thank you!
  Adina

  Always select a transit area and choose the logic of your source sql server schema, when you run the interface it must directly query sql server.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Reg: Doubts on knowledge Modules

  Hi all
  Please give brief idea about knowledge modules. Please do not give links.
  KNOWLEDGE MODULES
  -------------------
  RETRO-DESIGN
  Ok.
  CKM
  IKM
  JKM
  SKM
  
  Thank you very much in advance,
  -Combo.

  LKM - loading
  The LKM - knowledge of loading Modules - loading (or extract data) one data to another server.
  They are named as follows:
  LKM à ()

  JKM - logging
  Installing JKM - logging of knowledge Modules - logging on a store of data in a data model.
  They are named as follows:
  JKM

  Note: Logging uses triggers and views. So, technologies that do not support these functions generally do not have an associated JKM.

  IKM - integration
  The IKM - Modules of knowledge of integration - integrate data into a staging target data server. Frequently, the staging area and space target are on the same database server. The IKM can handle the insert data options (Append) or the incremental (update), etc.
  They are named as follows:
  IKM to()
  IKM()

  Note: The option is handled by the module often indicate more complex option taken in charge in this knowledge module. For instance, a module of incremental update (update) should also be able to handle the option append, i.e. the insertion and deletion of data in the target database...

  CKM - Check
  The CKM - knowledge Check Modules - manage data quality and cleaning, static data and data flows.
  They are named as follows:
  CKM ()

  RKM - retro-engineering
  RKM - knowledge market Module - one backwards engineering model of data stored in a particular technology. By default, the standard reverse to reverse all the information and metadata in most models. It is necessary for certain technologies (e.g. files) to use a personal setback and, therefore, an RKM. They are referred to specifically.

  SKM - Services
  SKM (Service knowledge Modules) are used to generate the code required to create data services. This code (typically Java) can be automatically compiled and deployed on a web services container.

  You can get more information about several KMs of
  http://www.Oracle.com/technology/products/Oracle-data-integrator/10.1.3/htdocs/documentation/oracledi_km_reference.PDF

  There is no escape from URL :)

• Use of the knowledge module

  Hi people
  
  can please suggest me what type of loading and integration knowledge modules can I use for my requirement
  
  Source-> AS / 400
  Target-> oracle
  
  
  Thank you
  REDA

  If you only need to add, and then use IKM SQL append, if you need update to date, then use Oracle IKM incremental update. If you use the incremental IKM Oracle Update, make sure that you use the latest version and make sure that you select the appropriate options (COMPATIBLE - 0 Oracle 9/10 and DETECTION_STRATEGY)

• What type of LKM, IKM modules are used in the scenario of perticular?

  Hello

  I doubt, what types of modules are used in the scenario of perticular. For example, I created the FILE interface of FILE FLAT DISH.

  for this I imported LKM FILE SQL and IKM SQL to ADD the FILES of modules. Executed successfully.

  I want to know on "what kind of modules are I have to import, when I try to connect a DB to different DB, flat file DB, flat file to DB etc.

  Please send me any document.

  Thank you and best regards,

  A.kavyakumari.

  Have a look on the following document, a bit old but still is a good overview of most of the widely used available KMs

  http://www.Oracle.com/technetwork/TestContent/oracledi-km-reference-130306.PDF

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• What memory can I use for Satellite L20-100?

  Dear Sirs,
  Please, help me to understand what type of bars of memory is compatible with satellite L20-100?

  on your site I found the description only for L20 - 101 -.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=107212
  -
  and it is this:

  Standard system memory: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM
  expansion module sizes: 128, 256, 512, 1 024 MB

  but on different sites, I found this module maximum expansion size = 512 MB

  and in the instruction manual (pdf-Russian) they say that the module is DDR instead of DDR2!

  which one should I buy?

  This is a appropriate:
  Kingston DDR2 512 MB PC-4200 (533 MHz) SO-DIMM KVR533D2S4/512
  200 pine?

  I can even use but 1024 MB?

  Hello

  Well, I think that it should be possible to upgrade the memory to 2 GB (2x1024Mo)
  I also found a site of memory module very useful:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

  and according to this site, it should be able to use the 200-pin-DDR2-533 modules SODIMM

• Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

  Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

  Hello

  Please use the part number and procedure on page 38 of the following guide:

  http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

  (Note: same procedure for s1xx machines).

  Kind regards.

• What digital IO to use to read the temperatures of a pt100?

  Hi all

  If this isn't a question about programming, but on the material and I need advice!

  For my experience, I have a usb-6008. The problem is I pt100 3 that I need to read and of course the usb-6008 work very badly because he does not read the resistance, but the tension and so I find myself with ridiculous in my readings of temperature fluctuations, making it completely useless.

  So here's my question, what guys would you use? Honestly, the usb-6008 case is average enough for my needs and work well with everything else I don't except this. I also doubt that my boss would be willing for me to buy a labview $ 1500 digital I/o, so I kinda need a less costly solution. Or maybe there's a way to twist the casing usb-6008 to make do what I want?

  Any suggestions would be very welcome!

  Thank you very much!

  For equipment, you can use NI 9217 and carrier cDAQ 9171:

  4 ch Module RTD 100 ω for USB

  You can also use DC pt100 or, possibly, 4 - 20mA pt100 my , these modules can then be fed to your USB9008. I have not used this particular means, but if you do a search on the web, you will find a lot of similar products.

• Flex 4.1 export of custom components in an Application or Module if used in the Module only?

  According to me, Miss me something here:

  "Because a module is loaded into a child domain, it has definitions of classes that are not in the area of the main application. For example, the first module to load the PopUpManager class becomes the owner of the PopUpManager class for the whole application because it records the Manager with the SingletonManager. If later another module tries to use the PopUpManager, Adobe® Flash® Player throws an exception.

  This technique also applies to components. The module that uses the first has the class of the component definition in its field. Therefore, if another module tries to use a component that has already been used by another module, its definition do not match the existing definition. To avoid a mismatch of definitions of element, create an instance of the component in the main application. The result is that the definition of the component is the property of the main application and can be used by modules in any field of the child. »

  I thought that if I use a component in one module then I won't be able to use it in application modules or a brother and I would be able to use it only in the Submodule of this module as the component definitions are in the scope of module which is a child of the scope of the application.

  So I just do a simple example: application with 2 moduleLoaders and 2 modules both using the same 3 components:

  (1) ButtonBar

  (2) DataGrid

  (3) CustomSkinnableComponent (empty, just extends SkinnableComponent) with custom skin (with a Rect 200 x 200 px, extends skin).

  I start the application--> two modules load without problem. Wasn't this supposed to cause error with the second loading module because the first module contains the definitions of components? Or does not result in an error because the component definitions match and match because my component is in the same project in flex, and in this case there is no problem. Problem will be if I have 2 or more RSL with the same definitions of package and class, but different features?

  I do not really understand how to cause incompatibility of definitions component so I can watch to avoid that it... can someone please explain?

  I'm confused and I thought I knew this kind of things. What Miss me?

  Also one last thing:

  I thought that if a module contains component definitions which means it is swf should grow in size-> due to the use of modules. If the application contains the definitions of components would not be what it means the application swf will grow in size and then-> why should I use a module? To save the memory of bodies and images/fonts embeded in the module?

  Bearing also in mind that the skin of a component is also a class definition and I incorporate some large images in there, and I use this skin in 2 modules, wouldn't that require skin to be implemented-> big size of swf application and no module swf as it should?

  Please someone shed some light in my foggy mind

  Post edited by: FM_Flame

  Pretty much:

  public var foo:Object;

  public function runTest (): void

  {

  If (Application.application.foo is nothing)

  Application.application.foo = new SomeClass();

  on the other

  trace (test (application.application.foo));

  }

  If you click the first button, then the second, you should see a type

  incompatibility.

• How to refresh variable ODI as part of a knowledge Module?

  Hello
  
  I want to know how can I update a varaible ODI in a knowledge module using oracle Technology. EX: I created a variable called VAR_TEST in ODI.
  In one of the module knowledge steps, I want to update as mentioned below:
  
  Start
  Select column name in #VAR_TEST in tablename;
  end;
  
  Thank you very much...

  Hi Martin,

  Put the query in the refresh tab in the variable, generate a script of the variable and call the script through "OdiStartScen" (Sunopsis API technology) of KM.

  In this case the variable should be "last value".

  An alternative is to use a Java variable instead... Works best at kms

  This help you?

  Cezar Santos
  http://odiexperts.com

• What method of encryption using Firefox?

  My Bank has just informed that my browser must use TLS 1.0 as its encryption method after 8 January 2015. I can't for the life of me I know what method of encryption using Firefox.

  I think the Firefox version 34 tomorrow will have TLS 1.0 minimum it will use and not SSL 3.0
  Security.TLS.version.min = 1 = TLS 1.0 0 being SSL 3.0

  Not on my computer to check.

• What is required to use a headset Logitech h110 with a Mac Mini?

  I plugged in two different Logitech h110 helmets to the Mac mini. One of them is brand new from its packaging.

  Nor, we record the entry levels of the microphone of the headset, as indicated on the screen Preferences sound.

  Other applications are also any audio input either.

  What is required to use a headset Logitech h110 with a Mac Mini?

  http://www.Amazon.com/STARTech-com-headsets-separate-headphone-microphone/DP/B00 4SP0WAQ/ref = pd_bxgy_147_img_2? ie = UTF8 & refRID = 0J342KYWVKRQFFXA4WPY

  It will also depend on the model of your MacMini, info provided you no, only the most recent models can use this type of adapter.

  You have purchased helmets designed for s PC not Mac.