What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

Similar Questions

• I want to improve my server database Oracle 10 g 10.2.0.4, node 2 CARS on OS: release of Red Hat Enterprise Linux Server 5.3 (Tikanga)-version 2.6.18 kernel - 2.6.18 - 402.el5 to 128.el5.  This core does support my current 10.2.0.4

  I want to improve my server database Oracle 10 g 10.2.0.4, node 2 CARS on OS: release of Red Hat Enterprise Linux Server 5.3 (Tikanga)-version 2.6.18 kernel - 2.6.18 - 402.el5 to 128.el5.  This core does support my current Version of 10.2.0.4 or do I need to apply patches on the binary database after upgrading the kernel?

  Thank you

  Hameed

  Hello

  It should work without problem.

  According to the following document, you should have the kernel version 2.6.18 - 8 or higher.

  Oracle Database (RDBMS) under Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) (Doc ID 169706.1)

  Also check this document:

  How to check that you have an Oracle support for the kernel (Doc ID 225710.1)

  Kind regards

  Bashar

• Installation tools in Red Hat Enterprise Linux 6 64 - Bit vmware

  Hello

  I just want to install vmware tools in a VM for 64-bit Red Hat Enterprise Linux 6 a RPM.

  I don't want to install the kernel and CCG files, sort of compilation was released, unless I absolutely have to do.

  It is a small database server footprint. X - Window is not installed. Perl is installed.

  Here is the list of packages to choose from.

  http://packages.VMware.com/tools/ESX/5.1/rhel6/x86_64/index.html

  I read the Setup Guide for VMWare tools for OSSP documentation (specifically the table 2-7) and the package base looks like that's what I need, but I don't know which one to choose.

  Should which package I install?

  Thank you!

  Linux is not windows.  Libraries are necessary because these tools and programs were designed to use libraries that were not installed with the operating system.  The instructions are VERY specific, they give you a step by step to install, if the base packages are needed you can simply guess or assume are not necessary.

  FOLLOW the instructions, that is what they are there for, is not serious if YOU think they aren't necessary, they are required, if the instructions to install VMtools say that they are required.

• editing: filesystem ' / dev/root ' found on Red Hat Enterprise Linux 5.5

  I'm moving a VMware system using partimage backup. But when I try to boot Linux I get the following error messages:

  Start 'Red Hat Enterprise Linux Server (2.6.18 - 155.el5PAE).

  root (hd0, 0)

  Filesystem type is ext2fs, partition type 0 x 83

  root of kernel /boot/vmlinuz-2.6.18-155.el5PAE ro quiet rhgb = LABEL = / 1

  initrd /boot/initrd-2.6.18-155.el5PAE.img

  Memory for the allowable range of kernel notwithin (0 x 0 to 0 x 0) crash

  Red Hat nash version 5.1.19.6 starting

  editing: filesystem ' / dev/root ' is not found

  setuproot: moving/dev failed: no such file och direcotry

  setuproot: Error mounting/proc: no such file och direcotry

  setuproot: Error mounting/sys: no such file och direcotry

  switchroot: mount failed: no such file och direcotry

  Kernel panic - not syncing: attempted to kill init!

  Take your time to look for (iso).

  How mkinitrd here. The last time I have to chroot and mount everything manually due to the error log with my ext3 file system after p2ved. If you're lucky, Redhat rescue will be chroot for you and what you have to do is, run $mkinitrd.

  Good luck!

  http://www.no-x.org

• Red Hat Enterprise Linux ES4 (U5) crashes on startup after P2V

  Hi all

  I have a Red Hat Enterprise Linux ES release 4 (Nahant Update 5) Server I try to virtualize. It runs a Tomcat application but also an Oracle database. I am using vCenter Converter Standalone and don't receive any error during the process, but to try to start the virtual machine newly created after the completed P2V happens to the following before apparently locking and no progress any more (while I can still use the keys ALT + function to switch terminals, none displays nothing except #1). :

  SELinux: End of initialization.
  SELinux: Implementation of existing Superblocks.
  SELinux: initialized (dev dm-0, type ext3), use xattr
  SELinux: initialized (dev tmpfs, type tmpfs), uses of transition SIDS
  SELinux: initialized (dev selinuxfs, type selinuxfs), use genfs_contexts
  SELinux: initialized (dev mqueue, mqueue type), not configured for labelling
  SELinux: initialized (dev hugetlbfs, type hugetlbfs), use genfs_contexts
  SELinux: initialized (dev devpts devpts type), uses of transition SIDS
  SELinux: initialized (dev eventpollfs, type eventpollfs), use genfs_contexts
  SELinux: initialized (dev pipefs, type pipefs), uses the SIDS task
  SELinux: initialized (dev tmpfs, type tmpfs), uses of transition SIDS
  SELinux: initialized (dev futexfs, type futexfs), use genfs_contexts
  SELinux: initialized (dev sockfs, type sockfs), uses the SIDS task
  SELinux: initialized (dev proc type proc), use genfs_contexts
  SELinux: initialized (bdev, type bdev dev), use genfs_contexts
  SELinux: initialized (dev rootfs, type rootfs), use genfs_contexts
  SELinux: initialized (dev sysfs sysfs type), use genfs_contexts
  SELinux: initialized (dev usbfs, type usbfs), use genfs_contexts

  Looking at the DMESG log on the server running, I see that a few lines of a successful boot of the system should relate to the controller floppy drive or at least the lack of it:

  Insert the floppy driver for 2.6.9 - 55.ELsmp
  Floppy drive (s): fd0 is 1.44 M
  floppy0: not found floppy disk controller

  and then the env initialisation:

  Broadcom NetXtreme II Gigabit Ethernet driver bnx2 v1.4.43 - HR (June 28, 2006)
  ACPI: PCI Interrupt 0000:03:00.0 [A] - & gt; GSI 18 (low) - & gt; IRQ 185
  divert: allocating divert_blk for eth0
  eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI - X 64-bit 133 MHz to mem f8000000, IRQ 185, node addr xe
  ACPI: PCI Interrupt 0000:05:00.0 [A] - & gt; GSI 19 (low level) - & gt; IRQ 193
  divert: allocating divert_blk for eth1
  eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI - X 64-bit 133 MHz at fa000000, IRQ 193, node addr xa mem

  However with any combination of cards and diskettes being enabled and disabled controller doesn't seem to be able to get the VM at startup after the "SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts ' line. The server is orginially a HP DL360 G5.

  How can I fix this far? I would avoid that changes to the physical machine to a minimum in order to preserve the State of it, but with the advantage of taking snapshots, I am less concerned to make changes to the virtual machine.

  See you soon

  Sam

  That is a difficult question to debug.  I suspect a problem with the SELinux based on what you wrote.  You may consider to disable SELinux on the source before the conversion.

  In addition, it is advised to disable active servers (Tomcat and especially Oracle) before starting the conversion, you could try to do this.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Red Hat Enterprise Linux 5 operating instructions

  I only managed to get installed DAQmx and running RHEL 5 and I wanted to put the instructions here in the hopes that I could save someone else a large part of the time.

  First of all, I want to thank all who have contributed to the forums OR regarding the DAQmx Linux software installation. Most of the information contained in this how-to came directly from these two positions: Fedora Core 6 How-to and Fedora Core 5 - kernel 2.6.20 - 1.5 NATION howto

  A special thanks goes to ninevoltz, who took the time to understand apparently most of this stuff on and even pushed back the developers of the core on the limitation of length of symbol of modpost.

  Here are the steps I took when installing a PCIe-6259 on Red Hat Enterprise Linux 5, 2.6.18 - 53.1.19.el5 kernel:

  1. Add UTS_RELEASE to the version.h file
     • CD /lib/modules/2.6.18-53.1.19.el5/source/include/linux
     • CP version.h.dist version.h
     • Cat utsrelease.h version.h.dist > version.h
  2. Create a link to asm_offsets.h with an underscore in its name
     • CD /lib/modules/2.6.18-53.1.19.el5/source/include/asm
     • ln s asm - offsets.h asm_offsets.h
  3. Modify the application of modpost to accept names of symbol more of 500 characters
     • CD /lib/modules/2.6.18-53.1.19.el5/source/scripts/mod
     • CP modpost.c modpost.c.dist
     • Change the line 1116 '#define SZ 500' to '#define SZ 1024 "
     • CD /lib/modules/2.6.18-53.1.19.el5/source
     • do (Note: this will fail, but will get far enough to rebuild the modpost program.)
  4. Download ni.com NIDAQ800_RedHat.iso and install it
     • Mount-o loop/mnt NIDAQ800_RedHat.iso
     • CD/MNT
     • . / INSTALL
     • CD
     • umount/MNT
  5. Remove the packages OR rusted, installed by NIDAQ800_RedHat.iso
     • rpm - e - nodeps nipali Edward nipxirmi niorbi nidimi
  6. Download NI-VISA - 4.3.0.iso to ni.com and install it
     • Mount-o loop/mnt NI-VISA - 4.3.0.iso
     • CD/MNT
     • . / INSTALL
     • CD
     • umount/MNT
  7. Recompile the kernel modules OR
     • / usr/local/bin/updateNIDrivers
  8. reset

  This procedure worked great on my system, I was still able to run the application/usr/local/bin/DAQmxTestPanels successfully. I had read that others had to wrestle with some MesaLib to make it work.

  Yes, whoo hoo! And, good luck.

  Warren

  
  

• Is Red Hat Enterprise Linux 7 (x86_64) a supported OS for WebLogic 12.1.3 version?

  Hello

  Is Red Hat Enterprise Linux 7 (x86_64) a supported OS for WebLogic 12.1.3 version?

  Red Hat Enterprise Linux 7 only is not supported, when will it be (in which version of WebLogic)?

  And where can I find the documentation for the packages all the required for Red Hat Enterprise Linux required to install WebLogic 12.1.3?

  Check the attached XLS.

  Red Hat Enterprise Linux 7 (x86_64) is not supported for WebLogic 12.1.3 OS version

  For installation instructions, please visit WLS 12.1.3 Installation guide

  2 Installing the Oracle WebLogic Server and software consistency (12 c (12.1.3))

  Hope that clarifies!

  Thank you

  Vijaya

• Package linux32 - R12.1.1 installation on Red Hat Enterprise Linux 5 64-bit

  I'm following Metalink 761566.1. Under the "software requirements", he mentions having to install "linux32 maintenance tools. ' I searched the internet and yum and cannot locate this package. It's on Red Hat Enterprise Linux 5 64-bit.
  Thanks colin

  Colin,

  That's what I mean when I install:

  [oracletestapp] [tmp] $ RPM - Uhv linux32 - 1.0 - 1.src.rpm WARNING: linux32 - 1.0 - 1.src.rpm: header V3 DSA signature: NOKEY, key ID 1bbd5459
  WARNING 1:linux32: generator of user does not exist - using root
  WARNING: user generator does not exist - using root)
  WARNING: user generator does not exist - using root)
  ########################################### [100%]
  [oracletestapp] [tmp] $

  Please download from the links below and install it using the same command.

  FTP://FTP.PBone.NET/mirror/FTP.PLD-Linux.org/dists/2.0/PLD/i586/PLD/rpms/linux32-1.0-1.i586.rpm
  FTP://FTP.ICM.edu.pl/vol/rzm2/Linux-PLD-Linux/dists/2.0/PLD/i586/PLD/rpms/linux32-1.0-1.i586.rpm
  FTP://FTP.task.GdA.pl/vol/vol1/FTP.PLD-Linux.org/dists/2.0/PLD/i586/PLD/rpms/linux32-1.0-1.i586.rpm
  FTP://FTP.ISU.edu.tw/pub/Linux/PLD/dists/2.0/PLD/i586/PLD/rpms/linux32-1.0-1.i586.rpm

  Thank you
  Hussein

• How did Red Hat Enterprise Linux appear in V$ TRANSPORTABLE_PLATFORM?

  Please see title of discussion.

  A database of oracle on solaris 10 sparc 11.2.0.3 is transportable to red hat enterprise linux?

  Yes - magazine pl MOS Doc link posted above.

  If so, how red hat enterprise linux appears in the column of the V PLATFORM $ TRANSPORTABLE_PLATFORM?

  13 Linux x86 64-bit                                                                                  Little

  HTH

  Srini

• Agent 11.1.0.1.0 on Linux 64 - x 86 Red Hat Enterprise Linux 6

  Hello
  
  I have the database 11.2.0.3 running on Red Hat Enterprise Linux 6, and I try to install a compatible agent is running on the host computer so that OEM base 11.1.0.7 running on Red Hat Enterprise Linux 5.0 can register the 11.2.0.3 database.
  Is it possible to install the Agent on Linux x 86-64 Red Hat Enterprise Linux 6 11.1.0.1.0.
  
  Please advice.
  
  Thank you
  RAM.

  Hi Ram,

  Just to update you.
  Agent of 12 c is available on Red Hat Enterprise Linux 6

  Best regards
  Vincent

• RPM for Red Hat Enterprise Linux 5 (64-bit)

  Hello!

  We have a new Pentecost ESX 3.5U3 inviroment. We want to manually install Vmware tools for our RHEL5/RHEL4 and now I wounder where you can get the number of laps for that and that we should use for Red Hat Enterprise Linux 5 (64-bit) and Red Hat Enterprise Linux 4 (32-bit)?

  /F

  I'm not sure about that if it is available separately... try this way on esx vmimages/tools-isoimages/linux.iso... Also in case if its not available then you can use VI to ride the same.

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Virtual MACHINE under Linux Red Hat

  On the matrix for, 'Oracle BPM Enterprise for WebLogic' on http://www.oracle.com/technology/products/bpm/obpm_config_matrix.html, it is said...
  
  >
  Linux Red Hat 4.x and 5.x (do not virtualization or kernel XEN) (x 86-32 and 64 x 86); »
  {quote}
  
  Does this mean that Oracle will not support BPM operating inside VMWare (Red Hat Linux) on a Red Hat Linux machine? Have you been successful with that this configuration?
  
  Thank you

  Dan,

  My comment was that I thought that the case was based on my past experience. I've personally never had a problem running BPM on Redhat in VMware. I have worked with many clients running this configuration and they have always been supported without any problem. Your question, Rich, I see no reason that he would not work with the KVM virtualization either since the end of the day it runs on top of Java.

  Thank you
  Adam DesJardin

• How to install Red Hat Enterprise Virtualization Beta 3 on 8 workstation

  Hello

  I downloaded the iso of Red Hat Enterprise Virtualization Beta 3 (rhevh - 6.2 - 20111108.0.iso 129 MB), but I am not able to install it on VMware workstation 8, because every time it stuck on loading the os. For more information see the attached screenshot

  and on the same workstation, I am able to run Hyper-v and RHEL 6.0 with enable KVM feature and also able to create a VM on them successfully.

  Could you please help me solve this problem

  concerning

  Rohit

  Oh and remember to use 'LSI Logic SAS' as your SCSI controller.

• Linux Red Hat Server VMWare P2V

  Hello

  I have worked to something almost the whole day, but cannot make it work and thought that I should ask for help now. In the subject line of the present States, I need to convert a server running RHEL 3 to a virtual machine on a host running VMWare Server 2.0, no interruption of service, preferably with a physical box, but I'll deal with a small amount if necessary.

  I've seen a few comments and those showing how do, but all of them are intended to complete ESX or ESXi. I did the procedure on this page http://www.vladan.fr/how-to-p2v-linux-into-vmware-esx-server/, but when I get to the part of destination, I can't select my machine running in VMWare server. I tried different versions of the programs without result. Currently I am running:

  VMWare Server 2.0.0 build 128374 on Windows XP. Any help would be greatly appreciated. Thank you.

  When you run converter for Server 2.x, the destination type must be 'VMware Workstation or other VMware Virtual Machine' and then, you select a folder, local or remote, where he will place the files that you can then add manually to the server creates 2.x once these files are copied to any data store you use on the host 2.x server once the conversion is complete.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Oracle Linux (Red Hat) on 14 t Envy Touchsmart

  I am looking for a compact machine to install Oracle Linux (based on RHEL)

  for purposes of development.

  The 14 t Envy Touchsmart ticked all my boxes (with the exception of the touchscreen) and I'm

  a point where I am seriously considering this machine. I checked the recommended

  material on Red Hat ( https://hardware.redhat.com ) that lists several HP machines,

  who did not understand the desire, but I was wondering if there is a significant difference

  prohibiting the RHEL running on the machine of envy from the officially

  support of the HP machines.

  I understand that RHEL is through a thorough process and some materials may

  do not be taken in charge yet, but I'm ready to compile and install all the required drivers and

  swap the minor components of the material if necessary.

  Essentially, what are the problems that I'm likely to expect in terms of compatibility of equipment?

  A.

  Well, never mind.

  I'll just take the EliteBook 840.